After latest itunes update, cannot run itunes: get error MSVCR80.dll is missing. What to do?
Tried uninstalling all apple programs, and downloading and reinstalling itunes. But itunes did not install correctly, and it tells me to reinstall. And if I click on the itunes icon I again get the error message than MSVCR80.dll is missing. (This is on my Windows 7 machine.)
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99890)
Similar Messages
-
Upon start up of my laptop I get a APS Daemon.exe system error - MSVCR80.dll is missing. This just started out of the blue. At one point it told me to reinstall ITunes. Is that truly necessary?
I have the same issue after installing the new update and reinstalling iTunes doesn't fix the issue.
I found disabling Apple push (APSDaemon.exe) from the start up will stop the error from appearing, however this will disable wireless syncing. If you don't use it than it shouldn't be an issue.
I'm using a PC so you can disable it using the msconfig command and turning it off in the Startup tab. I don't know if Mac users are experiencing the same issue. Hopefully Apple will fix it in their next update. -
i cant open my Itunes application through my PC, everytime i try to open it an error called error 7 pupmed out, or windows 126 error, and in other note they said i cant start itune.exe becouse MSVCR80.dll is missing from your computer ...
what can i do ?
please helpSolving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
I continue to get a MSVCR80.dll error... I have tried re-installing it several times and it continues!!! What is the solution to this?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99583) -
ITunes install errors: MSVCR80.dll and Error 7 (windows error 126)
All of a sudden my iTunes stopped working, and I get the following error messages:
1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
and
2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
This is not working. I've tried installing as Administrator but doesn't make any difference at all.
There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
ThanksITunes tried to automatically update today and failed and then I was also getting the MSVCR80.dll error
After trying many things I finally removed all Apple software
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
I was then able to finally successfully install the latest version of iTunes and the software installed correctly and the error went away.
I hope this works for you as well. -
How do i fix itunes system error msvcr80.dll
When selecting the Itunes icon i receive the following error:
The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling theprogram to fix this problem.
Do i need to remove itunes before reinstalling? What happens to all my backups, music etc. if I uninstall itumes.Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.) -
I updated the latest sofftware from Apple and have received a message - MSVCR80.dll is missing from computer. I tried several times to reinstall but haver the same error message come and now I can't open itunes.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't normally affect its library, but that should be backed up anyway.
(99134) -
I keep getting a msvcr80.dll is missing message. what can i do to fix?
I keep getting a msvcr80.dll warning message on startup tagged to iTunes.exe What can i do to fix? On my dell laptop
Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
After latest security update cannot access my wired network
After the latest security update on my MBP.... no longer can access wired network on laptop. Desktop did not update.... can still access wired network.
Anyone have a fix for the updated MBP?
Thank,
ReedIs it all applications that these keys don't work?
Also is it a wired keyboard or bluetooth keyboard, either keyboard i'd suggest starting with resetting SMC (helps USB) and PRAM (helps Bluetooth)
Reset SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
Reset PRAM
Resetting your Mac's PRAM and NVRAM
If it's a USB keyboard i'd suggest trying a different USB port and restarting the computer, for a bluetooth keyboard i'd suggest removing the keyboard from Bluetooth Preferences and repairing the keyboard. -
What is the solution for the "MSVCR80.dll" is no longer found in your computer when you are instructed to download and install iTuner 11.1.4?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99336) -
HT5654 CAN NOT OPEN ITUNES message says: MSVCR80.dll is missing
so I tried to download itunes again and have another error says "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you
have sufficient privileges to start system services.
Now what else can I try to open my Itunes?Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
My Fast Dial page disappeared after latest Firefox update- how do I get it back?
After updating to Firefox 7.0.1 my Fast Dial homepage disappeared. I have updated Fast Dial to the latest version which is supposed to work with Firefox 7.0, but the Fast Dial homepage is gone, and I have not been able to restore it. How do I get Fast Dial back?
see https://support.mozilla.com/questions/885622
-
I'm running Snow Leopard with the last week's update...
I see now cannot type several characters using the right shift key..
I tried to reboot - bad habit from windows era still no improvement...
how can I rollback to previous version of software?
or/ is there a solution to this problemIs it all applications that these keys don't work?
Also is it a wired keyboard or bluetooth keyboard, either keyboard i'd suggest starting with resetting SMC (helps USB) and PRAM (helps Bluetooth)
Reset SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
Reset PRAM
Resetting your Mac's PRAM and NVRAM
If it's a USB keyboard i'd suggest trying a different USB port and restarting the computer, for a bluetooth keyboard i'd suggest removing the keyboard from Bluetooth Preferences and repairing the keyboard. -
Bizarre error in terminal after latest system update while running "purge" command
sh-3.2# purge
[ERROR] <CPPathUtils.c:526> The device-file for this operating system, 'osx-12.1.0.xml', was not found. An attempt to revert to a previous revision of the OS device-file: 'osx-12.0.0.xml' has been made. Please file a Radar report with Apple, on the 'CoreProfile' component, version 'X'.
purge seems to still work, but now every instance of purge is immediately replied with the above error
any ideas? is this serious?My suggestion is to do the following as this is a level 3 error so hence is non critical:
1. Open Terminal.app
2. cd /System/Library/PrivateFrameworks/CoreProfile.framework/Versions/A/Resources/De vices/
3. sudo ln -s osx-12.0.0.xml osx-12.1.0.xml
4. Enter password if asked
By adding a soft symbolic link you fool the purge command into believing the newer file exists. This type of link is non-distructive and hence if the file osx-12.1.0.xml will be overwritten if it is installed with a future update.
Use this at your own risk but it does offer a temporary fix. Its hard to say if the issue is fixed in 10.8.2 we will have to wait to find out. The fix has the benefit of preventing the annoying message about rolling back as the roll back will be done behind the scenes using the link. -
Can anyone help me with this as it only happened when I tried to update my latest version of ITUNES
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2
Maybe you are looking for
-
Two JDeveloper versions together
Hi all, may I use a project built under JDeveloper 9.0.5 in the new JDeveloper 10.1.3 and then continue using the project in 9.0.5 ? I want to use the new features of 10.1.3 but having my production environment in 9.0.5. Can JDeveloper 10.1.3 compile
-
ITunes crashed everytime ipod touch is connected
Have brand new ipod touch 3rd generation and running iTunes 9.1.1 (ie latest) on a 15" macbook pro with system 10.5.8. Every time I attach the ipod touch the iTunes freezes with the whirling pointer. I have to use finder to force quit iTunes. I can r
-
Java.util.regex vs jarkata-oro on regular expression
hi, all Both java utility (java.util.regex) and jarkata-oro (org.apache.oro.text.perl) provide supports of Perl5 compatible regular expressions. What are your opinions of which one do you choose? I've searched in this forum and others online. I don't
-
How to add logo in email signature in iPhone 6
I am not able to add my company logo in email signature in iPhone 6 with iOS 8.2. logo file is in jpg format.I have saved the image file on iPhone but still not able to attach it in signature. Prashant
-
Can I upgrade directly from..?
Hi, I have a Panther 10.3 full version and I have purchased Tiger 10.4 a couple of months ago which is an upgrade version. I haven't got the chance to install it because I am moving to another country. I would like to know can I upgrade directly from