After latest itunes update i can no longer drag songs using home sharing.
Previously, I was able to open home sharing between my husband (his mac) and my computer (pc). But after the itunes software update on my pc, the ability to import and drag songs is gone. I have done it many times before. I see the home sharing library and can browse through it. But can't take any action with it. Can't import to library or to ipod.
With your iPhone connected and selected in iTunes, in Summary pane, select Manually manage music and videos.
Similar Messages
-
I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?
Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
http://roaringapps.com/apps:table
Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
When your ready for new hardware and all new software, then buy a new machine.
If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
http://www.bombich.com/get_ready_for_lion.html -
I was running the newest version of Snow Leopard, and after running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened?
I really regret that I said "OK" to Software Update message... after Software Update of these updates on 7-26-11:
Migration Assistant Update for Mac
Mac OSX 10.6.8 Supplemental Update
Safari
iTunes
Remote Desktop Client Update
Now I get a message:
iTunes cannot be opened because of a problem
Check with developer to make sure iTunes works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX.
Process: iTunes [5092]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: ??? (???)
Build Info: iTunes-10315501~1
Code Type: X86 (Native)
Parent Process: launchd [111]
Date/Time: 2011-07-26 12:08:18.568 -0500
OS Version: Mac OS X 10.6.8 (10K540)
Report Version: 6
Interval Since Last Report: 504736 sec
Crashes Since Last Report: 20
Per-App Crashes Since Last Report: 13
Anonymous UUID: B8B5EE28-970A-4E79-949B-EA2DD6E6DAA2
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @loader_path/libgnsdk_musicid.1.8.2.dylib
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: Macmini3,1, BootROM MM31.00AD.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.35f1
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0704, 0x24100000 / 2
USB Device: Hub, 0x0424 (SMSC), 0x2507, 0x26400000 / 2
USB Device: iMic USB audio system, 0x077d, 0x07af, 0x26440000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2502, 0x26470000 / 3
USB Device: Deskjet D4300 series, 0x03f0 (Hewlett Packard), 0x1f04, 0x26471000 / 5
USB Device: GD-0608-U, 0x056a (WACOM Co., Ltd.), 0x0021, 0x04700000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 3
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x04300000 / 2
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0307, 0x04310000 / 6
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020b, 0x04330000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8216, 0x06110000 / 5
FireWire Device: unknown_device, Unknown
FireWire Device: d2 DVDRW FW, LaCie, Up to 400 Mb/secSame thing happened to me and I get the same error message. These are the programs that don't work
mail
keynote
pages
all Office 2011 programs
safari -
Windows 7PC no longer detects iPad 3 after latest itunes update. Why?,
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
Cheers, Tom -
I recently installed itunes update and can no longer connect to network nor internet
I recently (sept 2013) installed itunes update and can no longer connect to a network nor internet wired /wireless. I know it is not the gateway as other devices work. Please help. I am not very knowledgable so exact instructions will be most helpful.
Try connecting your computer/laptop directly to the base station with an ethernet cable to one of the external ports and install your network settings. If it finds it there, it will find it after you've reloaded your network info to the base via the Apple Utility. Hopefully when you disconnect afterward, all will be fine. Be sure not to select "closed" network although Macs will login with no prolem, PC's have trouble doing so even with the network data stored in the internet settings.
Good luck! -
After my OS update I can no longer open email attachments. What could be the issue??
After my latest OS update I can no longer open email attachments. What might be in the issue??
Quit Mail and restart.
Select each of your mailboxes and select Rebuild under the Mailboxes menu.
If those don't help, then reinstall Yosemite:
Reinstall Lion, Mountain Lion, Mavericks or Yosemite without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, Mavericks, or Yosemite
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
iphone 4 not recognized and will not sync after latest itunes update. I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
After ios 8 update I can no longer play music through my car. I have a 2012 Nissan Rogue - which has its own cable made to use with iPhone 4 - I use a apple adapter to converst to use with 5. Has been working fine up until update. Is there a fix for this? The car does not have usb
Here I come to save the daaaaaaaaaay!!!
Had the same issue with my Nissan Rogue 2011.
This listed below will fix it...
Go to General > Restrictions > CarPlay -- Make sure Carplay is DISABLED. (The new IOS 8 enables this on default)
Go to General > Reset > Reset Network Settings
The Nissan Rogue radio system was never designed to work with CarPlay. By default, CarPlay feature comes enabled when you install IOS 8. Suckz, right?
You're very welcome! Have a great day!
Sincerely,
The Superhero -
After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.
Have you tried to reboot your phone(hold home and lock button simutainiously)?
-
After the security update I can no longer save or save as in Adobe Illustrator. The program has become useless. I tried the Rosetta Fix to no avail. How can I fix this?
I'm assuming by "I tried the Rosetta Fix to no avail" that means you downloaded and installed the 10.6.8 Combo Update? Is that correct, Apple hasn't posted any fix so you need to be specific about what you mean.
Please look over
http://osxdaily.com/category/mac-os-x/
is that the fix you are referring to? -
I can no longer drag songs into my playlists.
I can no longer drag songs into my playlists. I drag them over and nothing happens.
I have restarted several times and I still can't drag and drop. My only option is to control click and then it gives me a drop down menu of options including putting into a playlist. I think this alternative *****! Drag and drop was a whole lot easier
-
After installing latest OS 5.1 update I can no longer print to my HP Officejet Pro 8600 printer? Suggestions?
Installing the new os may have tricked one of the three devices involved. If it used to work, it will again.
Reboot the printer. Reboot the router. On the pad, general, reset, reset network connections.
Make sure all the devices are on the same wifi network. Talk nice to it. -
After ios 7 update I can no longer iMessage
After the latest update I can no longer send an iMessage. I have about 6 messages that were undeliverable. I searched the Internet and found many others are having the same issues. I asked my granddaughter to iMessage me from her phone and she said it went as a text message which I didn't get because I've blocked texting.
I re-booted, reset my network settings as suggested and nothing has done any good. There were postings that Apple is aware of this issue and will do an update thru iTunes.
Does anyone here have any ideas as to why I can't iMessage or what I can try to get it to work again?
Thanks.Chris,
I decided I'm just too chicken. I went to the AT&T store this morning to see if they could help me but they said since it was an Apple problem, I should call an Apple Store. I did that and they said if I would come in they might be able to help me. But that would be driving across the bridge to St. Louis County which I will NOT do. Those highways are killers.
I've been seriously considering going with a prepaid plan because AT&T is getting to me. This was probably the final straw.
I really appreciate your time but guess I'll just pass. BTW, the Apple Store said they had NO idea when Apple would update the software to fix this problem since only about 1% suffered this problem. My children had no problems at all. So strange.
I did do the hard re-boot and disabled my Network setting and also IMessaging to no avail.
Thanks again. I've printed off your instructions in case I decide to take the risk. -
MSVCR80.dll file missing (after latest iTunes update). Unable to reinstall iTunes either. Fixes?
After installing the latest iTunes update, I am unable to open iTunes (The program can't start because MSVCR80.dll is missing from your computer). Plugging in my iDevices won't prompt iTunes to open, either (they are viewed only as mass storage devices). I attempted to reinstall iTunes, but recieved an error message that said I had insufficient rights to install (I am an administrator). Is anyone else having similar problems? Is there a way to fix it that won't include uninstalling the current version of iTunes? Don't want to lose all my files! Thanks for a rapid response, Community. I appreciate all the help I can get.
Hi bookishwench,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
After latest iTunes update I get error message when syncing:
"iTunes could not sync information to the iPhone "name" because a connection could not be established to the iPhone". Same for my iPad, same for both even after upgrading to IOS6.0. Any ideas?
I tried to carry out a restore on the iPhone but iTunes cannot back it up.
Is the latest iTunes broken? or is it just me?
I am on Windows 7 64 bit, Never had this problem till the latest iTunes update.So I am unclear, did you purchase these songs or import them from a cd?
If you imported them and still have the CD try importing them again and see if they work the delete the others.
Or if you purchased from itunes re-dowwnload and see if they work. Maybe they are corrupted files and this should resove it.
Maybe you are looking for
-
[RESOLVED] dbms_metadata.get_ddl() issues
Hi all, I'm having a bit of an issue using the dbms_metadata package. I've never used it so possibly I'm unaware of something basic. I'm getting diferent results in my production and dev servers, both of which have this configuration: Oracle9i Enterp
-
My brother has a spare BT Vision box which I can have and I was wondering if it is possible to have two boxes running? My plan is to have only one connected to the hub at any one time... EDIT- I have had a quick search around the forums and seen that
-
How to make a function take a specific group of constants
I know i asked this before, maybe a year ago, but I totally forgot how to do it, and I haven't been programming much lately. But I was wondering if somebody can tell me how to make a certain function take specific constants. For example there are jav
-
HI Java experts, I am creating an java online test application, i got strucked in the following scenario. Scenario : My task is when my application starts running other operating system command and menus should be disabled. The operating system comma
-
Synchronize creates duplicates in data base
I import photos from the memory card to a folder. Regardless of import from a device or disk, convert to DNG or just copy the files I get duplicates if I try to synchronize the folder. If I remove the last created duplicate import and synchronize the