After latest up date, that took 3 hours, I an no longer hear the speaker, sounds like broken

every time I update something fails to work and and I take it in to Bell who are kind enuff to fix it. this time, unable to figure out whats wrong, So much for trying to support one of the few Canadian companies left.
Bo

I have also submitted feedback to Apple about this, as I think they have rendered Calendar all but useless by stripping out the ability to set sound cues, and to specify the lag time when hitting the "snooze" button. I completely agree, this is a serious and unprofessional messtep to remove a core function as though it were a trivial feature of the software. I've been a loyal Apple consumer for two decades, and this really makes me angry.
I am hopeful the wonderful people at Apple will restore this function with the next update to the OS.

Similar Messages

My mac hung up while installing an update. It took hours and still did not complete the update. I restarted my mac. Upon turning it back on, a wheel has been spinning on a grey screen. I tried to reinstall OS X from utilities, but encounter an error. Why?

My mac hung up while installing an update. It took hours and still did not complete the update. I restarted my mac. Upon turning it back on, a wheel has been spinning on a grey screen. I tried to reinstall OS X from utilities, but encounter an error. What do I do?

Hey Manaskala,
First point of call on all grey screen issues is the following:
http://support.apple.com/kb/TS2570
Given this issue has appeared after a software update, I'd advise you do the following instead though:
1. Get an external hard drive, with enough space to put the entire hard drive of your Mac onto. Make sure you've safely copied any data you have off of it, as the next step will erase it.
2. In the recovery HD of your machine, use Disk Utility to format you EXTERNAL hard drive with the partition table as GUID, and the format as Mac OS Extended (Journaled).
3. Get out of Disk Utility, and click Reinstall Mac OS X.
4. When asked where, choose to install onto your external hard drive.
5. When the download and installation is complete, your Mac will reboot into a clean fresh setup screen. Make your user account an administrator, and make up a name and password; I use 'Test' and 'test'.
6. Your machine is now running from the external hard drive, not the internal hard drive, so don't be alarmed when you don't see your files.
7. Open the finder, you should see 'Macintosh HD' in the sidebar. This is the internal hard drive of your computer.
8. Open Macintosh HD, and copy out the following folders into a new folder on your desktop:
-Users.
-Applications.
-Library. (This only needs to be done if you use 3rd party software that saves things in the /Library, do a quick google and see if it does e.g. Photoshop, Protools).
9. When these have copied (it'll take quiet a while), you can now use Disk Utility to erase your hard drive. Don't erase Macintosh HD but the ENTIRE hard drive on the inside of your Mac, and as Thomas A Reed mentioned, there was likely an existing issue on your HDD so please go to Security Options and choose 'Zero Out' before clicking erase. This will rebuild the partition table which was a possible cause of the failed update.
10. Reboot the machine holding 'Option', go to recovery HD.
11. Choose 'Reinstall Mac OS X', this time onto your INTERNAL hard drive.
12. When this is complete, make another admin user called test and password test, like you did last time.
13. Run Software Update from the  menu of your Mac.
14. In the Finder, you should see your external Hard Drive. open it up, inside that you should see your desktop etc, and on the desktop will be your folder containing Library, Applications and Users.
15. Go to Finder up next to the  and choose File -> New Finder Window.
16. In your second finder window, open up Macintosh HD (through the Go -> Computer menu), and go to your Users folder.
17. Open the Users folder in your first finder window, and copy your user folder (has your name on it) into the second user folder (the one inside Macintosh HD).
18. This might take a while.
19. When complete, go to System Preferences -> Users and Groups and unlock the padlock.
20. Click the '+' sign, and make a new administrator user.
21. Now, the fun bit. Note the name of your user folder you copied, e.g. 'Nathan', containing all of your stuff. Note the difference between your user folder (has your name on it) and the Users folder (contains YOUR user folder, guest folder and shared folder).
22. Make the ACCOUNT NAME of your new adminstrator user the EXACT name of your user folder (normally lower case and without spaces), this is case sensitive folks. Your full name can be whatever you want, usually your full name.
23. Then click create. You should be informed that a home folder with that name in it already exists in the Users folder, would you like to make your new account from that folder? say YES!
24. When this is complete, log out of the Test user, log into your new account we've just made, all your stuff should be there.
25. ???????
26. Profit.
There's a few little bits that may need to be cleaned up afterwards, applications folder from your external hard drive should replace the applications folder on your internal hard drive, if the previously mentioned /Library folder contained important goodies then that should replace the /Library folder on your new Mac.
Hopefully that will help you out, straight after that is done make sure your stuff is there, erase your external hard drive and turn on time machine!

HT4623 My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the char

My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the charger.

Try different USB Cable, try different Charger. Clean iPhone charging port with clean dry toothbrush. If still problem and you have Warranty or AppleCare, make Genius reservation and take iPhone to Apple for resolution. If no coverage, most likely it could be battery or charging port assembly that need replacement.

I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged

I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

HT4623 My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine

My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,

Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
(I'm using an ipad 2 iOS 6.1.2)
And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound.

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drvie to die before i use the other drives

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?

I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

Is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

My Webcam is not recording correctly. When recording directly to youtube, the audio sounds like a robot. It was not doing that when I first got my new MacBook Air last month. What do I do to fix it?

My built-in Webcam is not recording correctly. When recording directly to youtube (upload), the audio sounds like a robot. It was not doing that when I first got my new MacBook Air last month. What do I do to fix it?
I have tested it over several days with different internet connections...and have done it with another notebook computer on the same connection and it the video uploaded and recorded fine. I can also use the video webcam with Google Hangouts and it records and works fine. So I know the problem is not internet connection...and apparantly not even the webcam or mic.

Try using Settings > General > Reset > Reset All Settings.

HT4085 I has a problem and I am not able to solve that when I use sound effect it is showed only headphone even I did not installing the headphone I has a problem and I am not able to solve that I am. Not able to hear the sound without headphone please he

I has a problem and I am not able to solve that when I use sound effect it is showed only headphone even I did not installing the headphone I has a problem and I am not able to solve that I am. Not able to hear the sound without headphone please help guys

Sounds to me like a hardware issue or maybe something is stuck in the headphone jack. When you plug in headphones, the jack in the iPad is switched to play only through the headphones and not the iPad's speakers. Sounds like either the jack is faulty or there is something stuck in the headphone jack. Get a flashlight & look inside the jack for anything that looks like it doesn't belong in there.
Regardless, I'd take it in to an Apple Store if you have one nearby to have it checked.
EDIT: "Ocean20" had an excellent suggestion above. While doing that, you may also want to rotate/twist the plug in the jack back & forth a few times as well. Dirty contacts can often times be cleared by doing this.

Automatically po deletion after latest GRN date

HI expert
i would like to know after "Lates GR date" on the "Delivery" tab of the item details. after that date my PO should get deleted automatically or line item should get lock and for the same i can developed a Z report where i can come to know which all my po are near to "Lates GR date and can i ask workflow as in a mail will go to the endsuer.
Regard
Nabil

Hi,
Yes you can use this latest GR date functionality to restrict GR posting after this date
For this you will have set message make message M7-163 as error in attribute of system messages
This date needs to be enterned manually by user while PO creation
If you want to default this date auto then you need use user exit or BADI
Refer to OSS note 856279
For workflow set up i dont have much know how
Thanks
Diwakar

I downloaded the latest Firefox security update and my computer will no longer access the internet in any fashion, despite the fact that I'm still connected to the internet. Other browsers no longer work either.

Immediately after I downloaded the latest firefox security update my computer will no longer access the internet. I still have a fine wireless connection but Firefox, Internet Explorer, Itunes, and every other program will no longer access the internet, saying there is a connection error. I even tried restoring my system to a previous date but it said that a security program was preventing it from doing so.

What's the security program called? Is it '''Win 7 Security''' by any chance? There's a rogue AV app that will prevent internet access by that name. It comes in many different flavours, but it's basically the same product with different names depending on the operating system its aimed at. See screenshot.
Do you have another computer you can use to download Malwarebytes? Or can you get a friend to download it for you and copy it to a USB drive? Download from here: http://www.malwarebytes.org/products/malwarebytes_free
You can use the USB drive to transfer the program to your own PC and then install it.

Windows 7PC no longer detects iPad 3 after latest itunes update. Why?, Windows 7PC no longer detects iPad 3 after latest itunes update. Why?

Windows 7PC no longer detects iPad 3 after latest itunes update. Why?,

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

HT2480 When I type a text message the name it puts as "to" does not match the name that I have on my contact. i.e. shows John and Jane Doe when contact just has Jane Doe. Is there some old data that should be cleared? Can I stop the auto selection?

See question above

Do you have Facebook contacts turned on? It may be at some time you got an email message from them and that is the way they have their return address set. All previously used addresses are in a cache on the phone and the only way to clear that is to restore the phone as a new device, which deletes all data from the phone. You cannot restore from a backup because the information is in that and will just be put back on the phone.

After updating old Touch to 3.1.3, can no longer hear on Bose Sounddock. How can I update to an earlier version?

After updating old ipod touch to 3.1.3, can no longer hear it on old Bose Sounddock. How can I reverse-update to an older version? Or, is there something else I can do? I can hear the ipod on earbuds, but not on the sounddock.

All the monitoring is done through your sound device, not Audition. When you updated your PC, the sound device playback settings would have been reset. One of them includes input socket monitoring, and it's this that you need to reinstate. Since we don't know what sound device you are using, that's as much as we can tell you, except that if it's an internal device, you'll need to open the volume control options and alter it there. This varies between OS versions though...

TS4433 After 30 chapters in each book of Game of Thrones e-book the iPod sound chatters, dithers and will not continue. Same files on computer or other device have no issues.

After 30 chapters in each book of Game of Thrones audio book, the iPod audio dithers, chatters and will not proceed. The same files work in other devices and computers.

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

After latest up date, that took 3 hours, I an no longer hear the speaker, sounds like broken

Similar Messages

Maybe you are looking for