After Lightroom 5.6 catalog backup, cannot open Lightroom (hour glass appears for a few seconds, then nothing happens)

Cannot open Lightroom 5.6 after catalog backup (hour glass appears, then nothing happens)

I found the solution to this from these thread Re: Photoshop CC opens and then closes immediately. What gives? and Re: Photoshop CC Crashes/Closes within seconds of startup
I did it and it works for me So, I think I should share this so people who have faced the same issue as I can give it a try.
Basically, Just uninstall the Photoshop and Creative Cloud, then rename the folder SLCache to SLCache_old. Restart your computer once and then re-install everything again. (CC and PS)
It should work.
Thanks

Similar Messages

  • My Acrobat suddenly doesn't open.  It asks if it can, then I click yes, I see the circle for a few seconds, then nothing.  Anyone have any ideas?

    My Acrobat suddenly doesn't open.  It asks if it can, then I click yes, I see the circle for a few seconds, then nothing.  Anyone have any ideas?
    I tried removing then redownloading, still the same.
    Any help would be appreciated.

    Hi,
    Do you also have any CS6 products installed along with Acrobat XI Pro?
    Regards,
    Anand

  • Ipod touch will not turn on. Did a synch turned on. Then turned off.       and tried to restart. Apple logo came on screen for a few seconds then disappeared and cannot turn back on. This is a new replacement unit. only have had it 4 days.

    Tried powering on again after syn. Apple logo appeared for a few seconds then disappeared and now can not turn on. This is a replacement unit, only have had for 4 days

    Did you try to connect in recovery mode and restore "as new device", without using the latest backup afterwards? iPhone and iPod touch: Unable to restore and How to back up your data and set up as a new device

  • Cannot open Remote XUL manager under Developer - version 29.0.1 - nothing happens!

    Cannot open Remote XUL manager under Developer - version 29.0.1 - nothing happens!

    I found that after Firefox v29, a LOT of my settings and<BR>
    add-ons were changed / reset. Try this;<BR>
    '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
    <BR>While you are in safe mode;<BR>
    '''''Firefox Options > Advanced > General'''''.<BR>
    Look for and turn off '''Use Hardware Acceleration'''.<BR>
    Then check ALL of your settings. Browser and add-ons. Then restart.

  • Ipod touch 5th generation battery screen with lightning bolt locked cannot charge or restart.  ive tried everything from new cables attempting to shut down but stays at screen for a few seconds then black screen again over and over

    screen locked up and shows the battery with low red and ligtning bolt and cannot hard shut down or reset just stays there for a few seconds then black screen. hooked up to computer and itunes doesnt recognize it or even shows that it is pluged in.  looked and made sure nothing is broken or metal in ligting port or on cable which would prevent it from accepting a charge. ipod is only a month old and seems like a waste of money if its so hard to try to get an explanation of why this is ive been tryning to get an answer from apple for a week now.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I'm having problems with my app, plants vs. zombies 2. It'll open and stay open for a few seconds then shut down. Help please.

    I'm having problems with my app, plants vs. zombies 2. It'll open and stay open for a few seconds then shut down. Help please.

    Check to see if there are Updates available... If already up to date...
    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • When I open itunes it freezes for a few seconds then says iTunes stopped working and closes down. I have tried downloading the latest version, both repair and remove and it still keeps happening

    When I open itunes it freezes for a few seconds then says iTunes stopped working and closes down. I have tried downloading the latest version, both repair and remove and it still keeps happening

    Tried the un-install and getting the same problem although it takes a bit longer before it crashes this time. Checked the problem report and it looks the same as the previous reports.
    Problem signature
    Problem Event Name:          APPCRASH
    Application Name:          iTunes.exe
    Application Version:          10.2.1.1
    Application Timestamp:          4d756476
    Fault Module Name:          MediaToolbox.dll
    Fault Module Version:          1.0.694.3
    Fault Module Timestamp:          4d4d9a00
    Exception Code:          c0000005
    Exception Offset:          0034a672
    OS Version:          6.0.6002.2.2.0.768.3
    Locale ID:          2057
    Additional Information 1:          fd00
    Additional Information 2:          ea6f5fe8924aaa756324d57f87834160
    Additional Information 3:          fd00
    Additional Information 4:          ea6f5fe8924aaa756324d57f87834160

  • I cannot sync my iphone 4 to my imac it connects for a few seconds then goes off

    please can someone help me   When i connect my iphone 4 to my imac using bluetooth it pairs up but only lasts for a few seconds then goes off and shows
    not connected  i have tried all sorts of ways  but  without success  why is this happening am i the only one  does anyone know the answer please

    Seems like my problem - I have a new iPhone 4 and it does not want to pair with any device. It seems to connect, and is recognised by my MacBook pro, it shows the code that my Macbook shows, but then says it cannot connect. Neither did it connect to another imac, nor does it connect to my carphone. Have received a replacement (as I had bought the iPhone five days ago), have a new one now, but exactly the same problem. But I cannot alter the bluetooth settings on my iPhone, and restoring does nothing, nor leaving it in the completely unaltered setting, nor switching off all other wireless devices. Does anybody know how to solve this?
    Arnold

  • Why does my apps open for a few seconds then close.?

    If My Phone Dies &nd I Turn It Back On I And Try To Get On Twitter Or Instagram. They Will Open For A Few Seconds Then Go Back To My Home Screen. Why Is That Or How Do I Fix This Problem.?

    Try downloading any free app to resync your iTunes account.

  • My imessage wont work, when i open it the screen turns white for a few seconds then goes back to the home screen

    WHEN I OPEN IMESSAGE THE SCREEN BLANKS WHITE AND AFTER A FEW SECONDS CLOSES IMESSAGE AND GOES BACK TO HOME SCREEN!!! HELP ME I HAVE NO IDEA WHAT TO DO!!!!

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Messages>Send and Receive and sing out and sing back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • After appearing for a few seconds, all iCal items COMPLETELY DISAPPEAR.

    Ok, so this is a weird one.
    Today I used iSync to synchronize my address book onto my cell phone which has worked fine in the past. The iCal option was unchecked since my phone does not support Calendar synchronization. I backed up my iCal and my Address Book prior to synching.
    Afterwards, when I went to look at my iCal, I got a flash view of all my items, and then after a few seconds, everything disappeared. Completely. Everything. Gone.
    So, I quit iCal, and re-opened it. The exact same thing happened. I was able to see all of my items, and then everything completely disappeared. I have since quite and re-opened iCal about 15 times, and each time, the same thing happens. Flash of my items, and then they are gone.
    I have tried "Reverting to my Backup" which works for a moment, but then all of those items disappear as well.
    Does anyone have any idea what in the world could be going on here? This is SO weird.

    Though I don't have a solution for you, I can tell you that you're not alone. See the thread at http://discussions.apple.com/thread.jspa?threadID=1202000&tstart=0.

  • Open and Save screen show for just a second then disappear.

    Hi-
    First time posting
    I can't save or open projects on occation. The save window will show for a secound then dispear. same thing when I try to open a project. The window will pop up then disapear.  I edit on my iMac and my macbook pro.  this only happens when working on the iMac. The only way I can work in primier today is by opening a "recent project". No issues on the macbook. Any ideas?
    Specs:
    running Adobe CC
    Operating system: X 10.9
    Processor 3.4 Ghz Intel Corei7
    Memory 32 GB 1333 MHz DDR3
    NIVIDIA GeForce GTX 680MX 2048MB
    Thank you

    Hi HishamTheMachine,
    Welcome to the forums.
    Please create new profile and check if you are able to launch the program in it. Please go to the link below and create a new profile. Reboot your machine one the profile has been created and then launch the program in it.
    http://support.apple.com/kb/ph4600
    If you are able to launch the application and work on it then you might have to repair the permission on your old profile.
    Regards,
    Vinay

  • When completely inactive I will get what sounds like a radio station. It will play for a few seconds then quit. then start again an hour later. no open apps. any similar situations?

    As stated above I will get a random radio station coming through my computer playing ads.  I found similar problems happening to pc users but no help offered to a mac user.  No applications are running in the background (to my knowledge) and its really iritating. Any help or advice would be appreciated! Thanks!

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • Final cut version 10.0.6 crashes every time I put my hard drive in... when it's already in and I click on final cut, it opens for a few seconds, then 'quits unexpectedly'

    Someone please help me, trying to edit a project for college and I literally can't. I don't understand why it's not working, I've been on utilities and checked the hard drive and there's nothing wrong with it and I've made sure there is enough space on the drive.

    Have you tried trashing the preferences?
    Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
    http://www.digitalrebellion.com/prefman/
    Shut down FCP X, open PreferenceManager and in the window that appears:-
    1. Ensure that only  FCP X  is selected.
    2. Click Trash
    The job is done instantly and you can re-open FCP X.
    There is absolutely no danger in trashing preferences and you can do it as often as you like.
    The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones  .  .  .  instantly.

  • Firefox 3.6.12 won't open under WinXP. Have uninstalled/reinstalled several times. When I start the program (including safe mode) I see a Firefox process appear for about 3 seconds, then disappear. Run full scan with Norton with no malware discovered.

    I've used Firefox for years with no problems. I've not installed any new extensions or programs between the time it worked great and when the problem began.
    I click to start FF (shortcut, directly on program file, etc.) and I get an hourglass for a couple of seconds like it's starting, then nada. As mentioned, I see FF show up as a process in Task Manager for about 3 seconds, then disappear.
    Solutions I've tried include: Uninstall/reinstall on the same drive and a separate drive, registry cleanup/optimization w/Norton Utilities, full scan for malware/viruses with Norton, stopping some autostartup programs that were installed and in use while FF was running fine.

    I've used Firefox for years with no problems. I've not installed any new extensions or programs between the time it worked great and when the problem began.
    I click to start FF (shortcut, directly on program file, etc.) and I get an hourglass for a couple of seconds like it's starting, then nada. As mentioned, I see FF show up as a process in Task Manager for about 3 seconds, then disappear.
    Solutions I've tried include: Uninstall/reinstall on the same drive and a separate drive, registry cleanup/optimization w/Norton Utilities, full scan for malware/viruses with Norton, stopping some autostartup programs that were installed and in use while FF was running fine.

Maybe you are looking for

  • How to run hardware diagnostic with the help of terminal?

    how to run hardware diagnostic with the help of terminal? any cmds

  • Error message require adminstrator or higher level, already did disk repair

    Hi all, I can't seem to install my printer drivers without an error message coming up: The program you are trying to install requires admin. or higher level access. I have gone to disk utilities and tried to repair disk permissions but it no use. It

  • Config change reporting with CW LMS

    Hi there, I spent some time on LMS and  found LMS can create a report representing which devices' configs had changed for last 24 hours. Does anybody know if it's possible to create a report representing which configuration changes have done for last

  • Adding a PR to an existing PO and item number

    Hi, is it possible to add/convert a PR onto an existing PO, without adding it as a new line, or manually adjusting the figures? For example I have a PO which is for 100 units x £50. I have another PR for 50 units x £50. Normally we add this as item 2

  • Print to tape problems-Get the audio but no video

    I'm going from a QT file I brought into FCS and rendered, et al to tape. I'm able to get the audio track output but no video! The QT original of my film was 720x486 NTSC 4:3 H.264 and is a .mov file format. Bringing this into FCS, FCS asks whether I