After Lion update Vista32 partition vanished in disk0s4 not activated
Under SL 2 partitions with BootCamp: SL and Vista32, after update to Lion OS X.7 the Vista32 partition cannot be activated. Disk utilty program says: Volume check not successful, volume repair not successful, NTFS partition displayed as MS-DOS-FAT and not displayed in BootCamp.
Problem solved.
I called the Apple help line and an advanced tech told me to take the MBP to a store to have them enter the proper serial number -- which would correct the "identity" problem.
I took it to the store and they told me they could not change a serial number without changing the mother board -- which they did.
Problem solved.
sjh
Similar Messages
-
Will my Bootcamp partion go away after Lion update and then have to reinstall BC?
No. Updating to Lion should not have any effect on your Windows partition. However, I would backup everything first just in case.
-
Bought my imac after lion update came out, would update be free?
bought my imac after lion update came out, would update be free?
Here is the information you need to get it (if you bought it before July 20th I think):
http://www.apple.com/macosx/uptodate/ -
My SuperDrive doesn't work after Lion update
My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work, please help me shed some light on my problem.
ThanksI too have had the problem since updating to Lion. My superdrive isn't even recognized. I have repaid hard disk permissions and also reset PRAM. Sure wish I had a fix.
-
After LION update web Cam is no longer being detected at all. Does anyone have a fix? Thank you
After LION update web Cam is no longer being detected at all. Does anyone have a fix? Thank you
Thank you, Rod!
While researching frame rate I came across this helpful blog posting: Crazy about Captivate: Lessons Learned: Video and Resolution in Adobe Captivate
This is the line that caught my attention: "I discovered, after several experiments, that if you publish a course in Captivate as SCALABLE with a video inserted, no matter what the resolution, it makes the video look pixelated."
When I unclick the "scalable HTML content" button before publishing, the video is fine!
Big sigh of relief! Now I just need to figure out why audio won't play on one of the slides (it has an accordian widget, if that's relevant) and why I can no longer use Effects (I get the message, "Effect file is not valid") -
After a update my bookmarks vanished
hallo
after an update my bookmarks vanished and have a "Sweet/M search" i need really to have my bookmarks* http://www.imessengr.com/2006/12/how-to-remove-uninstall-sweetim.html
* http://www.sweetim.com/help_simff.asp
You can open the <b>about:config</b> page via the location bar and do a search for <i>sweetim</i> via the Filter at the top of the about:config page.<br />
You can reset all <i>sweetim</i> related prefs that appear bold (user set) via the right-click context menu to their default values.
*http://kb.mozillazine.org/about:config -
After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run. itunes will not now run.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
After I updated to yosemite my iMovie will not open. I have found the folders in the applications folder for both versions 9 and 10 but neither one opens when I double click on the icon. How do I remedy this?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
After iPad update I can't access my notes! Crashes opening with blank page. I have tried turning on and off. I have tried the reset to original. I have tried downloading again. Now what? I have important information that I need to get....
If you have set this phone up, then there would not necessarily be a solution here until you have been verify with the provider that everything is provisioned correctly on their end. Since the 3G comes from your cellular provider, if the settings are correct on the phone, then you should work with the carrier next.
-
Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox -
cant watch any videos neither on safari nor on any video application, it used to work but after i updated to 5.1.1 its not working, any help ?
Hi..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Now back to the menu bar, click Safari > Empty Cache
Quit then relaunch Safari.
Try one of the sites you had trouble accessing... -
Ok so I use an hdmi connector on my iPhone 4S to watch netflix. But after I updated to iOS 7 it will not work my tv doesn't receive a signal. Does anyone have any insure to this please help .!.!.
The 8 pin Lightning connector can only output 720p and lacks all iPod Out functionality unlike the full iPod Out functionality and 1080p that the 30 pin connector has and I suspect that they are coding iOS 7 specifically for the new devices which have severely reduced abilities and perhaps skipping adding the code needed for 30 pin devices to use their functionality with HDMI, etc.
-
after i update my mobile sim card its not working i got message from apple to change the sim card and i cant change it please i want fix the problem
Yes, the message is self-explanatory. You need a carrier who supports Apple's activation policy for an iPhone.
iPhone: Wireless carrier support and features - Support - Apple -
After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock.
Hi
A long story about your issue... I think the reason of this is why you have deleted some registry keys. If you delete something in the Windows registry you should really know what you do. You can damage the complete Windows system!
So I think this is the reason why the keyboard doesnt anymore.
In the user manual I have founded that the CD-ROM booting option is only available with optional optical disk drive.
So for me it sounds like that your USB CD drive is not compatible to the notebook -
after installing updated firefox,my speed dial will not open when I close the current tab which it did before I upgraded. How do I fix this problem? Thank You, Mike Chidester
is it up to date
Speed Dial :: Add-ons for Firefox
"Works with:
Mobile 0.7 - 1.0.*
SeaMonkey 2.0 - 2.5a1
Firefox 2.0 - 8.0a1"
https://addons.mozilla.org/firefox/addon/speed-dial/#detail-relnotes
Maybe you are looking for
-
Reg - Work Flow Program ( ABAP )
Hi, Pls advise Where i get the Program ( ABAP Code ) in the Work Flow. Example : I need to add one more plant in the WorkFlow .. Thanks Roy..
-
File receiver: Dynamic Filenames error
Hi I get an error in my File receiver adapter.. Receiver Adapter v1730 for Party '', Service 'SenderSystem': Configured at 19:32:43 2005-08-01 Last message processing started 19:33:26 2005-08-01, Error: Message processing failed with java.text.ParseE
-
Do I need to purchase imovie for each mac?
I have iMovie 10.0.3 on my MacBook Air, and iMovie 8.0.6 on my MacBook Pro. Both machines are running Mavericks. Do I need to purchase another copy of iMovie 10.0.3 ? Thank you.
-
Integrating Bank Wizard and Forms 6 on Tru64?
Hi all, I'm currently working at a site that is thinking about trying to call Bank Wizard from Eiger Systems from an old character based Forms 6 application that is running on Tru64. Does anyone know if this is even possible? Better still, if you hav
-
Hi, I seek the method to link Idoc standard to TCODE SLG1. Thanks for your contribution.