After loading 8.0b Program won't load.XRE functions couldn't load.
After downloading 8.0b program wouldn't run.Said couldn't load XRE functions.
Tried the clean install to no avail. Also, disabled virtualization with negative results. Also tried to reinstall Version 3.6 with same negative results. Finally after uninstalling all and cleaning registry, was able to load version 5.0 and it works.
Similar Messages
-
Get windows error 999 after installing itunes and program won't open.
I get a windows error 999 message when I try opening Itunes after a new install, what is my problem?
had to install OS X Mavericks again. after install, everything runs smoothly again. ran recovery from restart then installed mavericks over old mavericks.
-
After Effects CS6 full program won't open - only render engine
As the subject line says, I can't get the version of the product to open up - it defaults to the render engine, no matter which .exe file I open or project file I try to open. And -yes - as far as I know, I've downloaded and installed the full version of the program.
Is this a hardware/software/installation issue??I never resolved this
I have no idea if it's a registry key issue (probably the case?), a hardware issue, product registration issue..etc.
This was a short-term problem that I wanted solved ( I needed to open my project in the full version ASAP, but didn't have it installed on any other machine ), but instead we just expedited the long-term solution (below).
I really only needed the 12-core machine for rendering, so we ended up installing AE6 on a laptop that I can work from (the full version installed and opened up with no problems), and we use the 12-core machine ONLY for rendering - no actual project file work. Because of that, the render engine is all that needs to open on the 12-core machine.
Nevertheless... definitely a frustrating and confusing issue. -
After load the pdf in this program, what commands must follow to make the correction (edit),
if you use
http://www.doc2pdf.net/
you can convert doc >> pdf.
I did try with some samples of files but, in some pages where a subheading is in eg page45, in pdf moved to page44, well to modify the pdf so is exact alignment like doc I must use ACROBAT? Well, conversions from this site must done non-restrict modify the pdf? well since I have Acrobat Pro 9, after load the pdf in this program, what commands must follow to make the correction (edit), and save the file?Unfortunately, for your endeavor, PDF is not a file format that supports edit-layout-format activities such as are in word processors.
Not an "issue" - rather, it reflects what PDF was/is designed to be.
While minor editing ("touchups") are possible extensive editing of PDF content is not.
What you appear to have encounterd with the process used to convert something to PDF is something that happens rather too often.
That is, many non-Adobe PDF creation processes to not provide "proper" PDF.
Which is to say PDF built to the Adobe PDF References or, now, the ISO Standard for PDF (32000-1:2008).
As you have Acrobat Pro perhaps using it to convert the document's authoring file to PDF via print to Distiller or via Adobe PDFMaker is something to consider. These convert to PDF per the PDF References/ISO Standard.
Be well... -
Non of my video links seem to work; bbcipalyer keeps on loading filmon goes black website news programs won't start, i downloaded puffin player and through that films and newssites work , youtube won't part etc etc. I have a ipad2
Non of my video links seem to work; bbcipalyer keeps on loading filmon goes black website news programs won't start, i downloaded puffin player and through that films and newssites work , youtube won't part etc etc. I have a ipad2
-
Loader/DNG Converter won't close after loading photos into Bridge
This is a very recent problem. Previously, after loading photos the loader would close, Bridge would open at the folder I created through the loader and that was it. Now after all shot are loaded, Bridge opens at the last folder I had open previously and the loader remains open. Clicking on the X box won't close it. I have to go into Task Manager to do this. I tried a full re-install to no avail. I've looked at preferences and don't see anything that helps.
I haven't done anything other than what I noted above. I tried re-installing PhotoShop and Bridge and that didn't fix the problem. The only other thing that has happened since I noticed this problem was that Windows updates automatically installed. I'm on Windows XP Pro SP3. The problem is not a show stopper but it is annoying.
Anybody have any ideas why this would happen and how to fix it?OK, I tried changing the Preference by opening Bridge with the Ctrl key held down but I wasn't presented with the popup noted.
However -- D'OH! -- last night when I inserted my card into the reader and the dialog came up asking what I wanted to use to open I noticed that it was defaulting to Bridge CS3 (I still have some CS3 software on my machine). So I scrolled down, found Bridge CS4 and all is just fine. Thanks for the helps and tips. I do appreciate it. And I hope you can forgive my brain fart. -
Program won't load: Waves plug-in incompatible
Hi,
I'm a totally new user to Final Cut Express HD. I just installed it yesterday, and the program won't even completely load. It gives me an error saying "The Waves plug-in you have opened is too old or incompatible" then it will say "Some Waves plug-ins are missing from the folder." Help! I have no idea what to do. Thank you.
Chelseahey there Revolver & welcome to Discussions,
there have been reports of bad discs. contact Applecare & tell them your issues, they may send you replacement discs.
good luck. if your issue is solved please mark it as such for others to see. thanks. -
URLs clicked in other programs won't load in Firefox
Just within the last 1-3 weeks (?) or so, I find that I can't click on links in other programs and have the URL load in Firefox, which is my default browser. They always used to load perfectly and switch me to the new tab in FF, but now they don't.
At first I tried disabling a couple of recent FF add-ons one at a time to see if one of them might have been the problem, but that didn't seem to solve it, though I may have missed one. Still, I can't imagine how an unrelated add-on could cause URLs not to load from other programs. I have tried loading URLs by clicking on them in Thunderbird, WordPad, MailWasher Pro, and even Libre Office, but all of them either just twitched the screen for an instant and then stopped, or else gave me a message such as "WordPad was unable to open the URL" or "There was a problem sending the command to the program" (Libre Office). However, when I copy and paste those same URLs into FF and hit Enter, those sites load perfectly.
I may be wrong in this, but it appears that something has changed within FF that now prevents links clicked in other programs from loading. My only other thought at the moment is that this '''may''' possibly have started about the time I upgraded from FF 10.0.2 to FF 11.0.1, but I have no firm evidence to support that theory.
This is really an annoying and inconvenient problem, so any help in resolving it will be hugely appreciated!
Thanks,
AlThe problem is fixed now as a result of some help I got on the WindowsSecrets forum. Once I realized that the problem was occurring not just with MWP and Thunderbird, but with other programs as well (I tried WordPad and Libre Office, both of which likewise failed to load the URL into Firefox), I posted the question on other forums, trying to see if others knew anything about this issue. I got the answer from a forum member on this page:
http://windowssecrets.com/forums/showthread.php/145441-URLs-clicked-in-other-programs-won-t-load-in-Firefox?p=847784#post847784
In case you're not a member there or can't load that page, here was his suggestion:
With FF closed type %APPDATA%\Mozilla\Firefox\Profiles\ in the start menu search box, click the item that appears and delete localstore.rdf FF will replace it on starting.
I did that and all four programs that had previous problems loading URLs, including MWP, now load them perfectly. The only (minor) problem with this solution was that localstore.rdf apparently stores all the info about such things as the Firefox toolbars and their customisation, so all that was lost when I deleted the file, but I got them re-customised fairly quickly and all is well. Any thoughts regarding what localstore.rdf does, why this problem happened, or how to prevent it from happening again will be appreciated.
I hope this info helps. Thanks again for all your help.
Regards,
Al -
Mac won't boot, starts with white apple screen and spinning wheel. Also has grey loading bar which disappears after loaded then stays at white apple screen.
Hi cybertoof,
Welcome to Apple Support Communities.
It sounds like you're seeing a startup issue with your Mac, it's booting to a gray screen with an Apple logo. Try the suggestions in the article linked below, they will resolve most issues related to starting up your Mac.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
I hope this helps.
-Jason -
Installed FF. 8.1 and after reboot, tryed to start FF and got message "Could not load XRE functions.
I have been running I believe FF 6.3. I was getting nag popups to update FF. I went to help and used the selection there to up date. In doing so (more than once tryed this method) it would download and install like a usual update untill compleation. Then it would say Could not compleat update or Could not restart firefox because and instance is running. Close FF and try again. But there was no visiable FF running not even in Device Manager.
I will mention here that I did install Skype last week and have seen a couple of messages concerning Skype not loading on start up but seeing it running in the tool bar if this may have anything to do with it.
So looking for help at the FF site I saw recomended to DownLoad and install FF 8.1 so I did that. Then from Control Panel I uninstalled FF and rebooted and installed fresh leaving the old settings and bookmarks etc. Then rebooted again.
When I started FF 8.1 I now get a message "Could not load XRE Functions".
So remembering the last progy install on this box was Skype I went to the control panel and un installed it ---- and when I did, at the finish I got that same message "Could not load XRE Functions".---- Intresting---- hummmm but how do I get FF installed so I can get on with Life?
I just tried to verify this new account and got the same Couldnt Load message when I clicked on the email link for this forum.
Much Thanks in advance for anyones help.Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
Premiere Pro CS3 now exits after loading
After using premiere pro cs3 for quite a while, all of a sudden it exits after loading. I'm not sure if this is an Adobe problem or a Norton problem or a machine problem. It happened after a power failure, and while I was running premiere at the time, my power backup let me close the file and shut down premiere before it too died.
The computer is working fine with all other programs, including Encore & Photoshop. I just can't run Premiere. The other strange thing is that I can no longer access the Adobe site from that computer. The site starts to load then hangs forever.
I tried re-installing Premiere, no-luck. Then I downloaded the last update to CS3 (on another machine because the Premiere machine won't connect to the site) and tried to install it. No dice. The install hangs forever with "installing" on the screen.
I thought maybe there was an "installer" or "updater" problem, but can't figure it out.
Anybody have any suggestions?
Thanks.
Brad TyrrellHunt,
Thanks for the reply. I'll try that too.
A suggestion I got over at the DV board was to create a new admin account in XP and try opening premiere under that. That worked! Unfortunately, since I created my projects under the old admin file, I don't have access to them under the new one. I'm copying files to a different folder at this point, but I know Premiere doesn't like that.
If deleting the preference file works, it'd be a lot simpler.
Thanks.
Brad
By-the-way, how did you get your screen name to not be your email address? I can't seem to do it. I went into my account and changed things, but the forum seems to insist that my screen name is my ID which seems to have to be my email address. -
after loading photos to dropbox i can´t view them in full screen in iphoto ... i can only view them small ... when i click on them this sign "!" appears... do you know how to fix this????
If you're loading photos to drop box why do you expect to see them in iPhoto?
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
My Mac Mini takes forever to load programs now. After loading Mavericks it seems like I am back in PC World again!! My biggest concern is ALL of my iMovie projects seem to have vanished. I do not have sound on some web sites like YouTube. I lost the option to mirror from the Mac to the TV but I was able to solve that. Any suggestions on recovery of files? I do not use TimeMachine and did not back up anything before the Mavericks installation. I know...that's bad. Any suggestions would be greatly appreciated.
Here is what I am running:
Model Name: Mac mini
Model Identifier: Macmini4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MM41.0042.B03
SMC Version (system): 1.65f2
Serial Number (system): C07DV15PDD6L
Hardware UUID: 132F7FB8-1556-55D3-BF33-C1A5EFC69D12My Mac Mini takes forever to load programs now. After loading Mavericks it seems like I am back in PC World again!! My biggest concern is ALL of my iMovie projects seem to have vanished. I do not have sound on some web sites like YouTube. I lost the option to mirror from the Mac to the TV but I was able to solve that. Any suggestions on recovery of files? I do not use TimeMachine and did not back up anything before the Mavericks installation. I know...that's bad. Any suggestions would be greatly appreciated.
Here is what I am running:
Model Name: Mac mini
Model Identifier: Macmini4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MM41.0042.B03
SMC Version (system): 1.65f2
Serial Number (system): C07DV15PDD6L
Hardware UUID: 132F7FB8-1556-55D3-BF33-C1A5EFC69D12 -
Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.
Probably a good question to ask Viber or look at their support site.
-
After Loading Lion I now get 5 windows w/ a graphic of a Red Stop sign with an ! mark and the following text message:
"DAVE Networking
Dave kernel extensions could not be loaded! Error
71 - Too many levels of remote in path."
I have uninstalled DAVE and used Clean App to remove trace elements of program, however I still get the message and am unable to eliminate the error messages. When I click OK the message goes away briefly and then comes back up.
Any solutions would be great.Dave,
Thanks....What I did was load the free eval version of Dave 9.0 and then used the uninstaller which must have deleted the kernel giving me the problem.
Thanks for the response.
Razor
Maybe you are looking for
-
Trouble skinning AS2 ComboBox component
I'm using Flash CS3 and want to create a custom ComboBox. I've followed the steps outlined in "Editing component skins in a new document" (http://livedocs.adobe.com/flash/mx2004/main_7_2/wwhelp/wwhimpl/common/html/wwhelp.htm?cont ext=Flash_MX_2004&fi
-
Itunes doesn't reconize ipod touch anymore
itunes doesn't reconize ipod touch anymore
-
How to troubleshoot Software Update Deployment Errors
Hi Guys, Could you guys please help me to troubleshoot 'Software Update Deployment Errors'. I have been trying to troubleshoot the below mentioned errors but I am not sure what step should I take for each different errors. Could you guys please help
-
Hi I hav used the camera attachment to download photos to iphoto and want to create an album from the pics combing photos from different days. iPhoto just seems to create events based on dates. How can I combine different date files into one album?
-
Iplanet-Weblogic in clustering
My current environment is like this 1)i have installed Iplanet on Win2000 2)i have already setup a cluster between two machines one running on solaris/sparc and another on HPUnix 3)Now i want to use I