After loading OS X Lion on my Mac Pro it shows the operating system to still be 10.6.8 Is there something I missed in installing it.

I have installed OS X Lion from the App Store but after installing it when I open about this Mac it still shows the operating system as being 10.6.8 Any help would be appreciated

Did you actually install it?  Note that downloading it is not the same as installing it.  You have to let the installer run, and reboot, and finish the install.  Did it do that?  If so, did you get any error messages?

Similar Messages

  • After updating to mountain lion on my mac pro I am unable to connect my g-raid

    After updating to mountain lion on my mac pro I am unable to connect my g-raid 1T external hard drive using the firewire connection? I have 4 places to plug the firewire into, none work. All ports used to work with Snow leopard?

    Try this:
    Boot into Safe Mode then restart normally.
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    If this does not work to fix the problem, then:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • I am selling my Mac Mini. I recently purchased OS X Lion. When I restore to factory settings, how can I ensure that the operating system will still be Lion, and not the original operating system, which I believe was Snow Leopard?

    I am selling my Mac Mini. I recently purchased OS X Lion. When I restore to factory settings, how can I ensure that the operating system will still be Lion, and not the original operating system, which I believe was Snow Leopard?

    If you bought Lion from the App Store, you can't legally or practically transfer it, because it's tied to your Apple ID. Reinstall the original software from the discs that came with the machine.

  • Can a mac pro have a windows operating system?

    just wondering if a mac pro be able to have windows it's primary operating system?

    I NEVER use BCA
    Put Windows on its own drive and remove everything
    the only purpose/use for BCA is to download the drivers you will want to have that get installed after Windows is running - it works without also.
    So what I do is pull OS X drive, have Windows 8, data and backup drive, and clone Windows to #4th using Paragon (bootable) or slip ini an old Windows 7.
    Yes can be 100% Windows, and you can have mulitple Windows boot drives, run VMs under Windows also.

  • After effects CC doesn't run on MAC PRO

    after effects CC doesn't run on MAC PRO. Only the CS6 version run on this machine. What can i do. Thanks.

    With my MACPRO it's impossible to activate the GPU.
    What can we do. Now it's impossible to enable a video in AECC.
    For information the configuration of my machine and the windows of error in after effect CC.

  • Hello there I have Mac Pro I broked my secreen but it still under apple care so the going to fix it or change it ?

    hello there
    I have Mac Pro I broced the screen but it still under apple care so I just want to know if they going to fix the secreen or change hole the Mac Pro?

    Mac Pros are towers and have no monitor. A MBP does have a screen, but unless the screen damage was a manufacturing defect, Apple will not cover the damage under your warranty. But they will fix it at your expense.

  • Os lion crashing on mac pro now and then after startup trying to open first app

    Os lion crashing on mac pro now and then after startup trying to open first app like safari, nothing seems to respond then I restart it and its ok. Then after many uses it does it again.

    Take it to an Apple Store.
    Claypool Addict wrote:
    I've tried holding r, command + option + p + r, option + r, c.
    That command does nothing.
    Try option/command/R
    Don't press it until you hear the chime, don't release it until you see recovery loading, don't press other random combinations unless you know what they do.

  • After i upgrade to lion and updated logic pro to version 9.1.6 stops responding when loading "Ryu Chords" it stops responding, do anyone have any ideas what problem it can be?

    After i upgrade to lion and updated logic pro to version 9.1.6 stops responding when loading "Ryu Chords" it stops responding on certain moment, i tried to reinstall freshly and update to version 9.1.5 but problem same so at this moment version is 9.1.6. I tried 64bit too but no changes. And the thing is that i need studio and i need to sort this problem quick.
    Please everybody if you had same problem give me answer or any idea what to do
    Thanks

    The sample rate is not 128 or so, you probably mean the buffer size...
    But the performance drop makes sense: switching between a 64 bit process and 32 bit doesn't come free: it cost performance and creates a jitter, which also either shows as performance lost or instability.
    You really have to move away from outdated 32 bit AudioUnits, sorry. Ask the vendors to finally release 64 bit versions, it has been several years since 64 bit is available.

  • HT4809 My keyboard don't work after installing lion on my mac pro 2,6  any one a idea what to do ?

    I have installed lion on my mac pro 2x quadcore 2.6 from 2009 and now i have to reboot my system sometimes to make my keyboard work.
    Can someone help me ?
    Mac 3,1 osx 10.7.3
    Kind regards
    Jan

    I have the exact same problem with the same two operating systems and the same exact computer. Needless to say, I would also love to get an answer to this question.

  • HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    If you look at the User Tips tab, you will find a write up on just this subject:
    https://discussions.apple.com/docs/DOC-4053
    The subject of buying/selling a Mac is quite complicated.  Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
    SELLING A MAC A
    Internet Recovery, and Transferability of OS & iLife Apps
    Selling an Old Mac:
    • When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
    • Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
    Internet Recovery:
    • In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
    • Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
    iLife Apps:
    • When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
    • Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
    • It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
    SELLING A MAC B
    Follow these instructions step by step to prepare a Mac for sale:
    Step One - Back up your data:
    A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
    B. Clone to an external drive using using Carbon Copy Cloner.
    1. Open Carbon Copy Cloner.
    2. Select the Source volume from the Select a source drop down menu on the left side.
    3. Select the Destination volume from the Select a destination drop down menu on the right
    side.
    4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
    sure to opt for that.
    Destination means a freshly erased external backup drive. Source means the internal
    startup drive. 
    Step Two - Prepare the machine for the new buyer:
    1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
    2, Remove any Open Firmware passwords or Firmware passwords.
    3. Turn the brightness full up and volume nearly so.
    4. Turn off File Vault, if enabled.
    5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
    Step Three - Install a fresh OS:
    A. Snow Leopard and earlier versions of OS X
    1. Insert the original OS X install CD/DVD that came with your computer.
    2. Restart the computer while holding down the C key to boot from the CD/DVD.
    3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
    Optionally, click on the Security button and set the Zero Data option to one-pass.
    4. Install OS X.
    5. Upon completion DO NOT restart the computer.
    6. Shutdown the computer.
    B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because
    it is three times faster than wireless.
    1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
    Utilities window appears.
    2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button. 
    3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
    on the Erase tab in the DU main window.
    4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
    and set the Zero Data option to one-pass.
    5. Click on the Erase button and wait until the process has completed.
    6. Quit DU and return to the Mac OS X Utilities window.
    7. Select Reinstall Lion/Mountain Lion and click on the Install button.
    8. Upon completion shutdown the computer.
    *If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

  • I have received my first mac from a designer friend who passed away recently. He had been having problems with crashing in Lion. His friend upgraded to Mountain Lion before his mac pro laptop, mid 2010, was sent to me. It has many problems and crashes

    After sorting the material of my friends on the drive and creating a new user, I realized that the system was unusable with 30 or 40 crashes a day. I am a photoshop user and my friend had installed cs2 and upgraded to cs5. Actually everything was crashing and he had had the problems in Lion and they did not go away in Mountain Lion.
    So my sense is the next best step is to uninstall and reinstall the operating system....but I'm entirely new to Mac though I quite good at problem solving on PC.  I have been messing around trying to get Mac up for over a week now so am learning quickly but feel uncertain about the steps in installation and don't want to mess things further.
    I have found this
    https://discussions.apple.com/docs/DOC-3351
    which seems useful.
    I'm backing everything now to a usb drive, I have one copy in timemachine, but I need a clean install so I'm backing things manually as it's not so complicated my being a new user.
    I have the original discs of Snow Leopard and a dmg file of Mountain Lion that were installed on this computer.
    I hope I can find my friends Adobe id and password.....he does have a list of passwords, how can I check if they are correct.
    Do I need to install Snow leopard from the original disks first and then update and then upgrade to Mountain Lion?
    He upgraded first to Lion but I can't find that program to install, do I need it to get to Mountain Lion?
    I don't have boot disks, does that matter?
    What can I do about CS5 in a restore? I don't mind loosing other programs so much as this one.....I haven't seen the upgrades and only have CS2. What happens to all your programs...I guess they are just lost?
    I haven't used mail, so I'm not worried about that.
    Hope I can get some support with the process, any support will be valued that is at all related. Thank you

    Merielsea wrote:
    I am looking through this material, it's great. I'm wondering though, does command r work in #8 if my original disks where Snow Leopard?
    Yes, when the operating system was upgraded to 10.7 then to 10.8, it 10.6 was replaced so those 10.6 disks are only good now for completely erasing the entire drive and reverting the machine back to 10.6
    10.7 and 10.8 has a Recovery HD partiton on the boot drive.
    https://support.apple.com/kb/HT4718
    I have a mountain lion dmg file that was used to upgrade from Lion, would double clicking on this equal the same thing as reinstalling mountain lion over itself?
    I wouldn't use this, as Apple is now changing things, so you need to reinstall 10.8 via the Recovery HD
    I would prefer to keep CS5 photoshop
    Not going to happen, if it's working now good for you. But according to Roaring Apps it's not working for 10.8. and it needs to be upgraded to CS6
    If you revert the machine to 10.6 or 10.7, your going to erase CS5 and everything else.
    Doing #20 would be a bit beyond me and I don't know another mac user so that I can work from their mac.
    Why do you need another Mac users machine?
    Print out the instructions.
    Here is some more about secure erasing for a new owner
    How do I securely delete data from the machine?
    Installing OS X 10.8 again
    https://support.apple.com/kb/HT4718
    Does the reinstall have to go from Snow Leopard which was the base install, to lion then to mountain lion,
    No, you erase and install 10.8
    When Apple upgrades 10.6 to 10.7 then to 10.8, it's a complete operating system replacement, it's called a upgrade because it's still OS X but leaves all your files and most programs intact, none of the older operating system version remains.
    Just like if you would upgrade Vista to Windows 7, or Windows 7 to Windows 7 Pro.
    Can I install the mountain lion upgrade over a freshly installed Snow Leopard?
    Yes, but it requires erasing the entire drive (including 10.8 Recovery HD) from the 10.6 disks, then installing 10.6, then Software Updating to 10.6.8, then buying 10.8 from the AppStore, then downloading it and installing it, then the machine will be 10.8
    Or you can use the Recovery HD and just erase the Macintosh HD parittion then reinstall 10.8 that way for free.
    How to reinstall just OS X or erase/install OS X
    https://support.apple.com/kb/HT4718
    See what is confusing you is there is a hidden Recovery HD partition on the boot drive, it can do all the things like a OS X install disk can do, erase the Macintosh HD partiton (where OS X, programs and files are) and install a new copy of OSX from Apple's servers so it reboots to a brand new machine again (no Cs5 though)
    Instead of a boot disk, there is a two bootable partitions on the boot drive, one is Recovery HD and the other is Macintosh HD which boots into OS X.
    SO your command r booting the operating system in Recovery HD to erase the other partition and reinstall OS X into from Apple's servers, got it.? 
    Your going to need your AppleID and password to reinstall OS X 10.8, all part of the new world order.

  • Can I install Mountain Lion in my Mac Pro

    Can I install Mountain Lion in my Mac Pro?  This is my main computer and i only wnt to move forward if I know that it is 100% compatible with OS 10.8.  They tell you to look to see when it was built but there is no date that I can see. I'm pretty sure I got it in early 2008 ...  Here's the Hardware overview, without the serial number:
      Model Name:          Mac Pro
      Model Identifier:          MacPro3,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          3.2 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per processor):          12 MB
      Memory:          16 GB
      Bus Speed:          1.6 GHz
      Boot ROM Version:          MP31.006C.B05
      SMC Version (system):          1.25f4
      Serial Number (system):
      Hardware UUID:          449CFA37-8EAE-5A08-9027-1236BC17C747
    Thanks much.

    Yes, you can.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

    I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

    I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
    They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
    I don;t have the drive shared out at all at the moment, is this necessary?  How do I do this if so?
    I have attached the screen shots of all the settings.
    Thanks again for your help.

  • I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however i

    I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however it is asking for my serial number which I have misplaced. I am unable to trace my serial number anywhere. I have even checked my adobe membership to locate my serial number but it does not seem to have any record which is strange as I have been using this software for over a year now and the previous versions since 2009. Could someone help me in my predicament.

    Contavct Adobe support thru chat:
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Is there any way that I can get back my iPhoto?  After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

    Is there any way that I can get back my iPhoto?  After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

    As Niel pointed out, yes.  The disk probably will look like the MBP disk (4) in this screenshot;
    OT

Maybe you are looking for

  • Metro PCS 8530 No Longer Connects to Blackberry Servers

    I have the Q10 which I love. Wife has a 8530 which she loves. She basically just wants voice, BBM, and email. It works great for her. Her 8530 went wacked the other day. Phone turned on and worked fine except it would connect to nothing. We got Metro

  • BADI/User Exit suggestion - for determining Partner in PO header

    Hi All, I want to be able to automatically populate and determine a manual partner function within the header of a purchase order creation. Example, when PO is allocated against account assignment 'P' then go to the WBS element assigned and retrieve

  • How to make an indicator takes more than one input

    Hello, I want to know how to make an indicator ( like gauge for example) response to more than one case strrcuture result. In other words, how the indicator can take more than one input and move based on different input values ( the arrow of the gaug

  • Has there been any change in FF21 and newer regarding background music file playing?

    Access this URL : http://www.mamarocks.com/cats.htm in FF20 lets the background music associated with it play. However, accessing the same URL in FF21 and newer results with the webpage being displayed but the music associated with it does not play.

  • How to convert a number to duty cycle (FPGA)

    Hi I want to convert a numerical number to a duty cycle value in FPGA module so I could use it to generate a PWM signal for the numerical value. I tried dividing it but it shows an error in FPGA as it would produce a float value. I tried even the exa