AFTER LOADING THE DATA INTO THE INFOCUBE IT SHOULD NOT DISPLAY IN REPORTING

Hi experts,
                 I have the data in infocube. When i selected the cube in reporting it should not display i.e; the data should not display in reporting.
thanks nd regards,
venkat

Bit strange requirement. But if you have data in Cube and automatically its will be available for Reporting. unlike ODS, we do not have option of "Automatic request activation".
However on repoeting side, you can restrict the values to #  and exclude everything from slection. But not good solution as such.
Regards
Pankaj

Similar Messages

  • Loading Archived Data into Copied Infocube

    Hi all,
    We archived the old non-cumulative data in the cube 0RT_C03 (Stock Cube). Now we need to load archived data into a copy of the cube 0RT_C03. Archived data belongs to the year 2007 and there is no marker in the archive. Our marker is now at year 2008. As we understood from the “How to Archive in Business Intelligence” document we need to have a marker also in the copy cube which we will load 2007 data. Since we don’t have marker data in the archive file, and it is not obvious in the document we are not clear about loading marker data for year 2007. Now we are deciding to load marker data from R3 system with the extractor 2LIS_03_BX. Could you please comment whether this is a good idea or not.
    Thanks in advance
    Mustafa

    hi,
    my suggesstion is load the new cube with BX init load and compress as mentioned in the document and laod the archived data and then move the 0RT_C03 cube data to the new cube.
    chk the link hope you may have
    Non Cumulative key figures
    http://help.sap.com/saphelp_bw32/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    inventory management
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Ramesh

  • Deleting master data after loading transactional data using flat file

    Dear All,
    I have loaded transaction data  into an infocube using a flat file . While loading DTP i have checked the  option "load  transactional data with out master data exists" . So transactional data is loaded even if no master data is there in BW.
    While loading the flat file, I made a mistake for DIVISION Characteristic  where original master data value is '04000' , but i loaded the transactional data with value '4000' .Then i later realized after seeing the data from the infocube and deleted the request. then i reloaded data with value '04000'. Till now every thing is fine.
    But when I see the master data for DIVISION , i can see a new entry  with value '4000'.
    My question is how to delete the entry value '4000' from DIVISION. I tried deleting manually this entry from 'maintaining masterdata' , but it is not allowing me to do so .
    I have also checked if any transactional data exists for that value '4000' , as i said earlier I have deleted the transactional data with that values. even tried to delete the entries from the master data table, but i donot see a option to delete entries there.
    Please suggest me on this.
    Regards,
    Veera

    Hi,
    Goto RSA1 right click on the Info object and select Delete Master data. This will delete the master data unused existing in the table.
    If this master data is not used any where else just delete the master data completely with SID option.
    If even this doesnt work you can delete the complete table entire in SE14. But this will wipe out the entire table. Be sure if you wanna do this.
    Hope this helps
    Akhan.

  • While loading transaction data into cube what are the tables generats

    Hi,
    while loading transaction data into cube what are the tables normally generats.

    Hi,
    Normally datas will be loading to 'F'- Fact tables (/BIC/F****) *** - cube name..
    When you do compress the request the data will be moved into E tables.
    Regards,
    Siva.

  • While loading master data into PSA, the eorror is 'Error from PSA"

    Hi All,
    While loading master data into PSA, the eorror is 'Error from PSA"
    Could you anybody please help in this reagard.
    Thanx,
    Sridhar.

    Hi rakesh,
    May be IDOCs not processed completely,
    Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
    Cheers
    Raj

  • How to load data into an infocube from a flat file

    HI friends,
    Iam a learner of bw.
    I have master and transaction data to load into an info cube.
    I think we can load master data first, and then transaction data. that is master data we have to load through direct or flexible update and then transaction data through flexible update by preparing 2 excel sheets( one for master data and other for transaction data)
    Or
    can we load both at a time by preparing a single excel sheet which covers the values of characteristic, attributes and key figures.
    sai
    sai

    Hi Sai,
    Please find your replies below -
    I have master and transaction data to load into an info cube.
    >> You load master data in InfoObejcts and Transaction data in Cubes. So first Identify the Master data InfoObjects & InfoCubes<<
    I think we can load master data first, and then transaction data. << Yup good practice is to load master data first & then transaction data<<
    that is master data we have to load through direct or flexible update << you need to look into your scenario which one are you using??<<
    and then transaction data through flexible update by preparing 2 excel sheets( one for master data and other for transaction data) << Yup I think you will need separate file - Master data one for InfoObejcts data load & transcation data one for InfoCube data laod>>
    Or
    can we load both at a time by preparing a single excel sheet which covers the values of characteristic, attributes and key figures.
    Hope it helps
    Regards
    Vikash

  • Purpose of extracting the metadata after loading the metadata

    Hi Hyperion experts,
    AFTER loading the metadata in File what is the reason to go for extracting and where we will use

    I keep the XML files around after every load for a variety of reasons :
    - Loading to other applications : I'll generally make changes in dev / test and move to production. I guess I could probably get LCM to do the moving around; however, we're not big users of it at this point. I just load the file into the next app. It's pretty easy to open the client and hit load metadata. ;)
    - Historical Records : Since I keep a copy of every 'major' load into the system, I can easily 'roll back' or tell you when a change was made as far back as I want.
    - SOX Audits : Part of our controls is to ensure that changes loaded to production are approved through our documentation process. Having the files allows them to confirm what changes were made when.
    - Point in Time comparisons : Pretty much just like the SOX Audit, I will periodically review two points in time to see what has changed. For instance, every year when I roll out our budget Smartview template, I compared the current metadata to the prior year to do a quick check to see what accounts have changed. Depending on what has changed during hte last year, I may need to update my template accordingly, etc. [I use an XML differencing tool to do the comparisons]
    - Insurance : ' I'm not paranoid, I just know everyone is after me ' While I keep backups of my databases, etc, etc, I like having the file versions 'just in case'. If any of my other tools malfunction or I lose a backup, I can always grab my trusty files and reload.

  • I would like to see all my contacts in my old outlook acount, after loading the cloud I I can only find them in the new cloud acount. How do I get them back in the old outlook acount

    I would like to see all my contacts in my old outlook acount, after loading the cloud I I can only find them in the new cloud acount. How do I get them back in the old outlook acount?

    In Outlook, export your contacts to a .pst or .csv file. Keep the exported file
    How to export contacts from Outlook for Windows.

  • After load the pdf in this program, what commands must follow to make the correction (edit),

    if you use
    http://www.doc2pdf.net/
    you can convert doc >> pdf.
    I did try with some samples of files but, in some pages where a subheading is in eg page45, in pdf moved to page44, well to modify the pdf so is exact alignment like doc I must use ACROBAT? Well, conversions from this site must done non-restrict modify the pdf? well since I have Acrobat Pro 9, after load the pdf in this program, what commands must follow to make the correction (edit), and save the file?

    Unfortunately, for your endeavor, PDF is not a file format that supports edit-layout-format activities such as are in word processors.
    Not an "issue" - rather, it reflects what PDF was/is designed to be.
    While minor editing ("touchups") are possible extensive editing of PDF content is not.
    What you appear to have encounterd with the process used to convert something to PDF is something that happens rather too often.
    That is, many non-Adobe PDF creation processes to not provide "proper" PDF.
    Which is to say PDF built to the Adobe PDF References or, now, the ISO Standard for PDF (32000-1:2008).
    As you have Acrobat Pro perhaps using it to convert the document's authoring file to PDF via print to Distiller or via Adobe PDFMaker is something to consider. These convert to PDF per the PDF References/ISO Standard.
    Be well...

  • After loading the new OS now my songs do not play correctly. Titles are wrong on songs and it just doesn't play certain songs in random play or even if you select them individually. What's up? Kind of frustrating!!!

    After loading the new OS my songs do not play correctly, is anyone else having this issue? Titles are wrong on songs and it just doesn’t play certain songs in random play or even if you select them individually. What’s up? Kind of frustrating!!!

    I had the same issue.  In fact I posted it yesterday, but didn't get any replies.  I physically synched my phone to PC iTunes.  on the PC, under the phone/music tab, I unchecked the synch music box and then the apply button to remove all of the music from my phone.  Then once that synch finished, I went back and selected all music, and synch music and apply to put it back on to the phone.  So far, I haven't had an issue again, but I also haven't listened very long.  Hope this helps!

  • After loading the latest sofware with an update, (iphone 4 /5.0) I do not have zoom any longer with my camera, can I correct after loading the latest sofware with an update, (iphone 4 /5.0) I do not have zoom any longer with my camera, can I correct this?

    After loading the latest software with an update, iphone 4/ 5.0, I do not have zoom with the camera any longer, can I correct this or is it a software item?

    Steve:
    Welcome to Apple Communities.  The Zoom feature has changed a little in iOS5.  To activate the zoom, "pinch" the screen with two fingers.  You will see the screen zoom and will also now see the slider that you use to see when tapping the screen.
    Hope this helps.
    David

  • After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6.  10.6.7 now appears to be missing from the computer and my administrator status has changed to standard.

    After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6.7. and now appears to be missing from the computer and my administrator status has changed to standard.  Update Software says I need to do update to 10.6.7 which I can't do because administrator privileges are gone.   I didn't back-up with Time Machine ,BAD, but I have all files backed-up on another hard drive.  Should I just reformat and start over?  Any ideas or help would be appreciated.

    PROBLEM SOLVED! For me at least!
    Apple Support gave me the clue - I had run Migration Assistant, and it had obligingly replaced a system file (/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager) with the equivalent from my old system.
    I reinstalled 10.6.7 using the DVD supplied and all is well.
    The moral is - don't use Migration Assistant.
    Along the way Apple Support provided me with a link to download Combo update 10.6.7: this could not be installed on my iMac.
    Hope this helps.

  • I can't enter any values in JTextField after loading the flash files.

    Hi to all,
    In my application I have two panels. One panel has JTextField and another panel i loaded flash files.
    The flash files are build by CS4. I'm using JDIC to load the flash files. While open the application i loaded flash file and I try to enter any input in the textfiled, but I can't. After minimize and maximize the application I can enter the values. This problem happens only after I change the jre version from 1.6 to 1.7.
    While loading flash files I'm getting the below exception.
    org.jdesktop.jdic.init.JdicInitException: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
         at org.jdesktop.jdic.init.JdicManager.initBrowserNative(Unknown Source)
         at org.jdesktop.jdic.browser.WebBrowser.<clinit>(Unknown Source)
    pls give me a solution.
    Thanks in advance...:)

    I can't enter any values in JTextField after loading the flash files., locking.

  • After loading the 1.1 update my nano turns off after 60 seconds.  is there a fix for this?

    After loading the 1.1 update for my nano ipod my nano shuts down after playing the music for 60 seconds.  Is anyone else having this problem and is there a fix for it?  Very frustrating to have to keep hitting the sleep/wake button and then play to make the music start again during my workout.

    You have probably fixed the problem by now, but I also just bought a Nano and it was very frustrating with the music shutting off before the first half a dozen bars of the song.  I rang Apple and they sent me this page.... (if anyone else needs help)
    http://support.apple.com/kb/TS3700?viewlocale=en_US
    All it was that I hadn't pushed the headphones in until they were flush up against the Nano.
    Thanks Apple!

  • After loading the internet using Firefox AND then selecting NEWS and a delay the Error "The MSN toolbar has encountered an error. etc" occurs. Also, when browsing some searches are "REDIRECTED"!

    After loading the internet using Firefox AND then selecting NEWS and a delay the Error "The MSN toolbar has encountered an error. etc" occurs. Also, when browsing some searches are "REDIRECTED"!
    == This happened ==
    Every time Firefox opened
    == Hard to say but have been trying to diagnose for at least a week.

    Original message wouldnt post with attachments - trying again....
    Attachments:
    secondclickheredialog.jpg ‏40 KB
    FirstDialog.jpg ‏19 KB
    Firstclickheredialog.jpg ‏16 KB

Maybe you are looking for