After loading the new OS now my songs do not play correctly. Titles are wrong on songs and it just doesn't play certain songs in random play or even if you select them individually. What's up? Kind of frustrating!!!
After loading the new OS my songs do not play correctly, is anyone else having this issue? Titles are wrong on songs and it just doesn’t play certain songs in random play or even if you select them individually. What’s up? Kind of frustrating!!!
I had the same issue. In fact I posted it yesterday, but didn't get any replies. I physically synched my phone to PC iTunes. on the PC, under the phone/music tab, I unchecked the synch music box and then the apply button to remove all of the music from my phone. Then once that synch finished, I went back and selected all music, and synch music and apply to put it back on to the phone. So far, I haven't had an issue again, but I also haven't listened very long. Hope this helps!
Similar Messages
-
After loading the latest Aperture 3 update, aperture will not load and it appears to have corrupted 10.6.7. and now appears to be missing from the computer and my administrator status has changed to standard. Update Software says I need to do update to 10.6.7 which I can't do because administrator privileges are gone. I didn't back-up with Time Machine ,BAD, but I have all files backed-up on another hard drive. Should I just reformat and start over? Any ideas or help would be appreciated.
PROBLEM SOLVED! For me at least!
Apple Support gave me the clue - I had run Migration Assistant, and it had obligingly replaced a system file (/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager) with the equivalent from my old system.
I reinstalled 10.6.7 using the DVD supplied and all is well.
The moral is - don't use Migration Assistant.
Along the way Apple Support provided me with a link to download Combo update 10.6.7: this could not be installed on my iMac.
Hope this helps. -
I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!
Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.
-
i've updated my iphone 3gs software to the latest version of ios and now my device does not activate. i've searched for help here and it still doesn't work...is there anything else i can do, or i have to take the device back to the store?
Where did you buy this iPhone and how did you unlock it?
-
Keeps asking me to down load the new version but says i am not connected to internet
It tells me I need to down load the new updated version of hp then when I try it tells me I am not connected to internet
1.Power Cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
2. Turn off Extensions, if any.
Safari > Preferences > Extensions
3. Turn off proxies, if selected.
System Preference > Network > Advanced > Proxies Tab
Under "Select Protocol", uncheck any box if selected.
Click "OK" then "Apply"
4. Uninstall anti-virus software, if any.
5. A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273 -
After downloading the new update for my iphone 4 the screen only show an itune logo, as
well as a plug in picture, thats it. No icons are visible, phone does not come on except to show
the two icons. When I power up it does nothing except shows those 2. When power off I dont even
get the slide off screen it just goes black. WTH?Hello bigboza,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
Have a nice day,
Mario -
Now running itunes version 11.0.1.12 since the update I've added songs to playlists and they won't sync - I was able to get the songs into my ipod library by downloading from the cloud but they wouldn't even sync from my pc library to my ipod - when I first downloaded this crappy update - so sorry i did - the thing wouldn't sync at all after rebooting my windows xp pc three times it says it syncs fine and goes through all the motions but it won't pull over new content at all - songs or podcasts - on top of that the new version seems to have done away with the album cover display - I just got an android phone as a gift i was going to take back I may keep it now and drawer my beloved ipod now that apple has made it obsolete
There's a good guide here on how to roll back to 10.7 https://discussions.apple.com/thread/4559563?tstart=0
-
I had registry issues which were not allowing itunes to update. Finally got that fixed and now have the most current version of itunes on my PC. Now a new issue...itunes is not recognizing that the ipad is pulled into the PC. Help!
Hi there,
I have found and linked to a support page which should help you. Take a look.
iPad Assistant - iTunes
Regards,
Nathan -
After installing the new software Yosemite, my iPhoto is not working is there a fix for this?
After my son installed the new software Yosemite 10.10.1 my MacBook Pro iPhoto has been disabled, and can not figure out how to get it working, Any suggestions?
Upgrade it to the new Yosemite version in the App Store.
-
A new version of Firefox downlaoded the other day and now Firefox will not open at all. I tried to redownload version 4 and an earlier version (3.6) but I get a message that says that "Firefox must be close first in order to continue". There was no other box open at that time. What can I do to get Firefox to work?
Hey, thanks for the info. Upon further reading into the help section, I realized that I had to uncheck spybot tea timer to get the downloads to save & open. Wish I had read that a couple of months back... Works fine now anywho, thank you for your response.
Have a good one! -
version is 10.1.3. Two of my friends are having the same problem.
my mac is OSX version 10.7.3 2.66 core 2 duo with 2 GB of 800 mhz ddr2Back up all data.
In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
If you still have the issue, repeat the above steps using this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
I loaded the new iTunes (11.0.0.163) on my computer and also just purchased a new iPhone 5. Prior to loading the NEW iTunes, I was able to sync with my new iPhone 5. After I loaded the new iTunes, I now get an error message: 0xE8000084. What's up?
Also, it says the iPhone 5 is not registered to my Apple ID.See if the troubleshooting for 0xE error codes on this page helps : http://support.apple.com/kb/TS3221
-
i used to hold down alt whilst draging the movie into the menu at the left side of itunes now that menu is no longer there
the movie file now shows up in home videos within the movie folder so all my movies are in the movie file in itunes except the new ones now go into movie/home video itunes since i updated itunes
As implied above, if you do not use a metadata tagging utility and share or import your files directly to iTunes the new files are automatically tagged as "Home Videos" during the import process but you can still use iTunes to make them appear in the same directory as your other movies just as you always could chage their display directory. Simply...
1) select the "Movies/Home Videos" tab in the main window,
2) select any/all of the videos you want moved,
3) select the "File/Get Info" menu option (or press "Command-I") to open the "Information" window,
4) select the "Options" tab in the "Information" window
5) Select the "Movie" option in the "Video Kind" pop-up, and
6) Press the "OK" button to move all items selected in step #2 above to your "Movie" directory and close the "Information" window.
If you use a metadata tagging utility to add tags to your videos before import to iTunes, then pre-assign the "Movie" Media Kind tag to your files before import to iTunes. If you use a metadata tagging utility to tag files after import to iTunes, then manually set the "Movie" Media Kind option in that app and let it update the iTunes "Movie" directory. If the metadata tagging utility has not yet been updated to recognized files pre-assigned to the "Home Videos" directory, then manually tag the Media Kind in iTunes as described above before using the metadata tagging utility. If you don't like having iTunes automatically assign the "Home Videos" tag to untagged videos during import, then use the iTunes Product Feedback form to request an iTunes "Preference" enhancement option be added to the application allowing users to select a default "Media Kind" to be assigned to "untagged" video files during import. -
After load the pdf in this program, what commands must follow to make the correction (edit),
if you use
http://www.doc2pdf.net/
you can convert doc >> pdf.
I did try with some samples of files but, in some pages where a subheading is in eg page45, in pdf moved to page44, well to modify the pdf so is exact alignment like doc I must use ACROBAT? Well, conversions from this site must done non-restrict modify the pdf? well since I have Acrobat Pro 9, after load the pdf in this program, what commands must follow to make the correction (edit), and save the file?Unfortunately, for your endeavor, PDF is not a file format that supports edit-layout-format activities such as are in word processors.
Not an "issue" - rather, it reflects what PDF was/is designed to be.
While minor editing ("touchups") are possible extensive editing of PDF content is not.
What you appear to have encounterd with the process used to convert something to PDF is something that happens rather too often.
That is, many non-Adobe PDF creation processes to not provide "proper" PDF.
Which is to say PDF built to the Adobe PDF References or, now, the ISO Standard for PDF (32000-1:2008).
As you have Acrobat Pro perhaps using it to convert the document's authoring file to PDF via print to Distiller or via Adobe PDFMaker is something to consider. These convert to PDF per the PDF References/ISO Standard.
Be well... -
I would like to see all my contacts in my old outlook acount, after loading the cloud I I can only find them in the new cloud acount. How do I get them back in the old outlook acount?
In Outlook, export your contacts to a .pst or .csv file. Keep the exported file
How to export contacts from Outlook for Windows.
Maybe you are looking for
-
2.1 Update what is fixes and what it F's up
Wow, I was initially amazed at the performance bump of the 2.1 update this am. After updating to Itunes 8 it sent my phone and 6 coworkers phones into bricks or partial bricks, here is the thread: "I own one Iphone, my fiance one, and my five cowoker
-
Opening files in Photoshop CS6
Yesterday, before closing down, I uninstalled P/S 7, CS2 and CS3 to gain space, but do not know whether that action is relevant to my problem. Today I find that Jpegs will not open in Photoshop, and in Bridge only by going through Camera Raw. Photosh
-
The follwoing errors have been found in log file recently: java.io.IOException: Compiler failed executable.exec weblogic.utils.NestedError: Can't unregister an ROID that does not exist - with nested exception: [weblogic.
-
Has anyone managed to create an email account on the OS X mail client with Exchange 2007?
Hi guys, the IT chaps of my new employer tell me that it is impossible to use the OS X mail client with Exchange 2007 servers. Is that correct? If so, does anyone know a workaround? Thanks Juergen
-
How to Create System messages in BW
I want to create a System message in BW. Please let me know. Thanks Prasanna