After Login Business roles are getting diffrent format

Dear Experts,
After upgrading when i am login getting business roles with different format like one business role is divided into 3 to 4 lines but i want that only horizontal
means in single line.
Any help really appreciated.
Thanks & Regards,
Laxman

Hi Dhimant,
Business roles are splits like below fromat
select business role :
                                . sales
                                 organisation
                                . service
                                  organisation
                                . marketing
                                  organisation
like this my business roles are coming but i want that names in single line
. select business role
                     sales organisation
                     service organisation
                     marketing organisation
Thanks,
Laxman

Similar Messages

How many standard business roles are there in CRM

Hi Experts,
I had a question in one of my exam.. please answer it
question:- How many standard business roles are there in CRM?
options were:- 2,3,4,5
I think the options does not have the right answer , upto my knowledge it is more than 5. please help me with the appropriate answer
Thanks
Rahul Mathur

Hi,
There are approximately 40 standard business roles available in the latest version ehp3.
As the version changes the business roles increases. Initially there are only 3 std business roles..
1.sales pro 2. marketing pro 3. service pro and along with IC Agent.
Each BR above is loaded with huge no of transactions even though our aim is to for ex: create sales order...we use sales pro but all the sales related operations(transactions) are being loaded in to the system so along with the version improvements/releases SAP have divided each of these std BR as much as they can and thus the no of operations or transactions per BR is decreasing with each release....
Thanks & Regards,
Malleswar.

CRM WebClient Error login after selecting business role

Gurus,
I am facing a problem with WebClient UI. Once i login I select a Business role and either I get a blank screen or the following error:
An error occurred during initialization of the application
An exception occurred during the internal HTTP communicationException Class CX_BSP_WD_HTTP_RESPONSE_ERROR
Text: HTTP answer has status 404
Additional Info: Not Found
Program: CL_BSP_WD_STREAM_LOADER=======CP
Include: CL_BSP_WD_STREAM_LOADER=======CM002
Source Text Row: 61
I have tried almost all the different solutions given here. I suspect SAP Kernel, whether my ICM executable is latest version. We are in CRM 6.0 and I am setting up a standalone system usig best practices for a demo

Have you activated all necessary services in SICF?
Check these:
/default_host/sap/public/bc/icons
/default_host/sap/public/bc/ur
/default_host/sap/public/bsp/sap/system
/default_host/sap/bc/bsp/sap/crm_ui_frame
/default_host/sap/bc/bsp/sap/crm_bsp_frame
/default_host/sap/bc/bsp/sap/gsbirp
/default_host/sap/bc/bsp/sap/thtmlb_scripts
/default_host/sap/bc/bsp/sap/thtmlb_styles
/default_host/sap/bc/bsp/sap/crm_thtmlb_util
/default_host/sap/bc/bsp/sap/bspwd_basics
/default_host/sap/bc/bsp/sap/bsp_wd_base
/default_host/sap/bc/bsp/sap/crmcmp_hdr
/default_host/sap/bc/bsp/sap/crmcmp_hdr_std
/default_host/sap/bc/bsp/sap/uicmp_ltx
/default_host/sap/bc/bsp/sap/bsp_dlc_frcmp
all services under /default_host/sap/crm
all services under /default_host/sap/bc/webdynpro
all services under /default_host/sap/bc/bsp/sap/crm_ic
/default_host/sap/bc/bsp/sap/crm_ui_sysmsg
/default_host/sap/bc/bsp/sap/iccmp_css
/default_host/sap/bc/bsp/sap/ic_base
all services under /default_host/sap/bc/bsp/sap/bsp
all services under /default_host/sap/bc/bsp/sap/crmcmp
Best regards,
Artur Litvinov.

Business Roles not getting refreshed in UI

Hi,
When I log in to the Web UI, I can see all my roles.
Now when I delete a Position/user assignment in the org model, I would assume
not to see that role when I log on to the BSP application.
I'm completely coming out of the application to reflect my changes.
My questions would be
1. How to delete a business role
I've tried removing the complete position itself but I can see the roles
I even tried clearing the browser cache but not luck, I'm using Firefox.
2.I wanted to try a different browser, can somebody tell me how to change the browser
3. For the other roles when I login I get an Interaction centre page with most of the screen blank.
I've checked all the links
I did try other solutions mentioned in other threads.
I'm new to this version as well.
I'm following c04 and CR580.
Please do tell me the missing config.
Another point is that I've SAP_ALL role
Points will be given
Thanks in advance
Regards
Deepak
Edited by: deepak nair on Oct 28, 2008 3:39 AM

Hi Deepak,
1. Did you copied SALESPRO business role to ZSALESPRO business role?? If yes, delete ZSALESPRO business role and
again copy SALESPRO business role to ZSALESPRO1 - reason may be by mistake you have copied IC_AGENT or IC_MANAGER to ZSALESPRO.
2. To make your life easy with PFCG roles -
2.1. I suggest you to copy standard Sales Professional role to "Z" role
(eg: SAP_CRM_UIU_SLS_PROFESSIONAL to Z_SAP_CRM_UIU_SLS_PROFESSIONAL) and generate the profile.
2.2. Add role SAP_CRM_UIU_FRAMEWORK (copy of it eg: ZSAP_CRM_UIU_FRAMEWORK)
2.3. Add these roles to your User along with SAP_ALL (or Z_SAP_ALL) and SAP_NEW
3. Add your User to Employee
4. Add your Employee to the Position in Org. Model
5. Select PFCG Role ID = Z_SAP_UIU_SLS_PROFESSIONAL in your business role (ZSALESPRO1)
6. Extend your Position with Business Role (PPOMA_CRM -> double click on your position -> select GOTO -> Detail Object -> Enhance Object Description) -> highlight business role -> click on create info-type -> select your business role (ZSALESPRO1) -> save
7. Clear the browser cache (delete temp. internet files) and delete cookies
8. Log on to WEB UI with your user and password...
I am sure that, if you follow this - you will active WEB UI without any problems. If still you have problems, let me know....
Cheers,
Peter J.

Business role assignment get lost

Hello *,
from time to time single users report logon problems due to missing business role assignment.
In these cases business role was assigned via user in tx su01 directly. Whenever it happened the affected user itself is shown for last modifier of user record. But the users of course are not authorized to edit this data.
We assume that maybe the personalization in web ui could be the reason but up to know the behaviour was not reproduceable.
Does anyone know this issue?
Kind regards
Thomas

Hi Thomas,
Sorry but maybe I've explained myself poorly. You said that business roles that were missing are normally assigned directly in SU01. Then, in order to try to understand how they are remove, in SU01 transaction there is a functionality that allows you to see the change history for every add/removal of a role. This will tell you the user that performed the action and which tcode he used.
Check this functionality that it's available as a menu option in SU01. Maybe it can give you some good clues about what's happening.
Kind regards,
Garcia

SRM 7.13 opening page after login - now shopping area, but need change to Personalization

Hello Experts
I kindly ask for a hint.
How to change the opening page (which get right after his login) in SRM 7.13?
Now the user is directed to Shopping Area, but I need to change this to Personalization.
Thank you
I.

Hi,
menu items have priority.
Regards
Konstantin

Lockup after login. Can I get a bit of help here?

So, this morning I decided I'd reboot my mbp before I started some coding. I rebooted it and came back a few minutes later, logged in, and then it just sat there. I let it sit there for at least 45mins and it did nothing.
What happens after you enter your password in the login window, is the window goes away and the blue swirls background comes up and it just sits there.
I've been working on trying to fix this for at least 5 hours now with no luck. (This is my first mac, so it's been quite an experience, heh.) I did a clearing of the logfiles then replicated the issue.
It seems the the issue could be caused by configd? The system.log file is full of lines like this:
launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/configd"[142]: exited abnormally: Abort trap
and
launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/configd"[955]: exited with status 1
the log also shows the mds framework exiting abnormally and getting killed.
Anyone know how to fix this so I can get in? Everything works just fine until I log in. I can't afford to do a reinstall right now.
P.S. I'll post log if someone can tell me how to get networking up in single user mode.

Hmmm… I don't know what to suggest to you without take a more drastic action like an archive and install. You big problem to my mind that that it won't safe boot (be sure that it can't as it does take quite some time to boot this way). Additionally I'm off to bed as it's 1am here.
Personally I would have resorted to either a backup/clone else a clean install by now.

Derived roles are getting overwritten everytime when I update Master Role.

Hi Experts !
We have created some Master and Derived roles in the past. According to the requirement we have made some changes directly in the derived roles like some value of objects, activities, etc.. Now we added one t-code in the master role and generated its profile and generated all derived roles also. But changes made directly in derived roles earlier, revoked from all derived roles.
Now can anyone tel me how to add t-code in Master and derived roles so that the changes directly made in derived role should not be removed.
Please help and give your valuable advise.
Regards,
Lokesh Bajaj

Hi Lokesh,
The main principle of derived roles is that they inherit all object level access from the parent with the exception of organisational levels.
Using derived roles you cannot achieve your requirement. If there are any object level differences in the derived roles then you will need to create different master roles or delete the inheritance relationship. This is a design constraint when using derived roles and if you do use them (some would advise against) then it has to take this functionality into account.
You can promote most field values to org levels which will not be overwritten but you need to be very careful that it doesn't cause problems elsewhere (e.g. promoting auth group to an org level). I respectfully suggest that you do not go down this route without consulting someone who has done it before and can evaluate your solution for it's suitability.
Cheers

After capturing, Quicktime movies are the wrong format

I recorded on my JVC GY-HD110U in 720p, 24 f/p/s. I'm trying to digitize it, and I went to FCP Easy set-up and set it up for HDV 720p-24 and hit "setup", and when I hit "now", my capture status window comes up, and I can see the footage being captured. Then when I hit escape however, and go to my browser, a clip only shows up half the time. When it doesn't show up, and I go to my capture scratch, and double click on the QT movie, it will say error opening movie. The other half of the time the QT opens and it works fine. I can't figure out why some work and some don't. Can anyone help me figure out what's wrong and how to fix it?

interrupted captures
I'm not buying the "mystery." Software either works or it doesn't. If it worked before, you changed something or something was changed for you. Some joker on your crew changed settings on the camera between takes. Endless list of possibilities.
Take what you know about your previous successful captures and try to analyze what's different about these recent failures. I'm betting it's going to be embarrassing simple.
bogiesan

Business Role assignment now working as Expected

Hi All,
We have a User A, B and C , all these users have Business Role X, when these users were logging in they were gettings screens as per the configuration.
However now all of sudden Only User A ,though still has same Business Role X , is getting different Work centers,Logical links Mostly standard(Claim management, worklist, calendar,Email Inbox) .
User B and C who have the same business role are getting correct UI screens.
We are unable to find what went wrong all of sudden.
Thanks in advance for your suggestions
Regards,
Chandu.

Chandu,
If the CRM_UI_PROFILE is set to some UI Profile, this takes more priority(than the UI Profile assigned to the Business Role)
and shows the Navigation Bar and Work Centre configured for this UI Profile.
The normal Business Role configs wont work at that time.
Remove this entry and see, it will solve the issue.
Regards,
Masood Imrani S.

How to get Currently used Business Role

Hi Experts,
I need to get the business role currently being used by the user (i.e. SALESPRO). I've come across the method calls
Data: lr_ui_profile type ref to IF_CRM_UI_PROFILE,
lv_profile TYPE CRMT_IC_CONFIGPROF.
lr_ui_profile = cl_crm_ui_profile=>get_instance( ).
lv_profile = lr_ui_profile->get_profile( ).
and so I tried it on an ABAP report being called from the WebUI via Transaction Launcher. However in my case after executing the method LV_PROFILE doesn't yield a value (but SY-SUBRC was 0). Can anyone kindly provide a reason behind this? Or are there any other ways to retrieve the current login business role of the user?
Regards,
Marc
Edited by: imdiko24 on Nov 12, 2010 8:51 AM

Hi Marc,
Please try once, as exactly what i said in my earlier repl..
Assign any business role like for eg. "SALESPRO" in SU3 to parameter CRM_UI_PROFILE and test with the following code if lv_value holds the business roles?
*DATA: lv_value TYPE tpara-partext.*
*GET PARAMETER ID 'CRM_UI_PROFILE' FIELD lv_value.*
lv_value will hold the current business role..If you get correct business role in lv_value, that means you have not assigned business role correctly in the org model.
Cheers,
Sumit Mittal

Roles not getting reflected after logout

Hi All,
I am using JDeveloper, LDAP , and Single Sign on for authentication and Roles.
After the user is authenticated using SSO I have the following code in my Action class
String userDN = actionContext.getHttpServletRequest().getHeader("Osso-User-Dn");
using this I get the UserId.
Also I check the roles in JSP as
request.isUserInRole("VOLUNTEER");
The above works fine.
Now the admin changes the roles of a user. Immediately if the user tries to login his roles are not reflected. The roles in LDAP are reflected.
Let me know how isUserInRole works and if there is any caching problem with it.
Any help will be appreciated.

You need to adjust the cache. You can find info on how to to this here:
http://download-west.oracle.com/otn_hosted_doc/ias/preview/web.1013/b14429.pdf
It is in section 5 "Configuring OC4J Instance" of the J2EE Security Guide. You may want to disable the cache.

Individual Account Creation in IC_AGENT business role.

Hi,
After system got upgraded from 6.0 to EHP1, marketing attributes are not working as expected.
When i create an Individual Account type in ZIC_AGENT business role, it gets created successfully but its marketing attributes are not getting set when i check in the Account overview.
There is a BADI implementation of "BUPA_GENERAL_UPDATE", i debugged and found that in FM "CRM_MKTBP_READ_KSSK_AUSP", system is trying to get the attributes from table "ausp"
      select * from ausp into table et_ausp
          where partner_guid = lv_guid
          and klart = 'BUP'.
I think, somewhere configurations are not done correctly. But i am aware where i check all these configurations for markting attributes corresponding to BP. If you know then please let me know.
Thanks
Raman.

Hi,
You can check it in ,
MARKETINGPRO ( business role ) -> Marketing ( work center ) -> attribute Sets
search for the specific attribute/attribute set. go to OV page ..there will b check box for person and organization.
Regards
Sandeep Kumar B

Blank Screen after selecting a role within the new WebClient User Interface

Hi,
I have another Problem with the new UI.
I did all steps as described within the Best Practice Guide for the new Web Client (C04). I used this guide to set up our CRM 2007 System.
Unfortunately no matter what I do after selecting the appropriate role after logging on to the system I only get a blank screen and nothin else happens. Even changes to the navigation frame have no effect.
If I do not assign a business role I get at least this error. But after doing this I allways got a blank screen no matter what I change in customizing.
Does anyone have any clues where the error might lie?
Best Regards
Christian

Hi Christian,
Could you please share me your experience how you resolved this issue?
We are at the clients place facing the same problem. After logging in it is asking to select business roles like salespro,marketpro....etc...but after selecting this role we are getting blank white screen in the browser with URl- http://*******.**.com:8030/sap/bc/bsp/sap/crm_ui_frame/default.htm?sap-client=150&sap-sessioncmd=open
We have followed the latest 2007 Best Practice where we have assigned the roles to user like : SAP_CRM_UIIU_FRAMEWORK
SAP_CRM_OR_ADMIN
SAP_CRM_OR_USER
BP_POWERUSER
In best practice 5.2 this role was assigned through Org Model where as in 2007 first it guides us to get the WebClient and then asking us to create Org Model.
you had mentioned that you got rectified through local server settings on OS level. Can you please help in explaining what exactly you did to rectify the DNS setting????
Any other solution most welcome
Regds...Arup

CRM 7.0 How to create Business role & generate

Hi Team,
Can you please let me know some breif idea about CRM 7.0 security guide.
How to created Business role is this part of functional activity?
Whats the role of Technical colleagues BASIS guys in CRM 7.0 security .
Please help me to get some document regarding business role creation , generation , assignment & authorization checks in CRM 7.0.
Thanks & Regards,
Vyash Mishra

Hello Viyash
I will add the most important information for generation of business roles and assignment of authorizations to users.
You must first create the PFCG roles. PFCG role is built based on the Business Role.
Please see documentation in : SPRO
SAP Implementation Guide => Customer Relationship Management
UI Framework > Business roles > Define Authorization Role
Then the PFCG role can be assigned to the business role in
SAP Implementation Guide => Customer Relationship Management
UI Framework > Business roles > Define Business role
Finally you must assign business roles to Organizations or positions in organizations in
SAP Implementation Guide => Customer Relationship Management
UI Framework > Business roles > Define Organizational Assignment
The users that are assigned to such organizations / positions will be therefore linked to the business role.
With the previous steps the users will have the authorizations that are assigned to the PFCG profile that is linked to their business role.
Business roles are the main way to configure authorizations for users in CRM but you have more options that give you flexibility.Each business role has assigned one PFCG role, but the relationship between business role and PFCG role is not strict. You can even assign a dummy PFCG role to a certain business role in business role customizing and then go to transaction PFCG and assign other PFCG role(s) to the users that are assigned to that business role.
I would say that the previous tasks must be performed by the basis team but in cooperation with the functional team
Best Regards
Luis Rivera

After Login Business roles are getting diffrent format

Similar Messages

Maybe you are looking for