After login I get a blue screen and then back to login window, but only for one account

When one of the users on the iMac tries to login it goes to a blue screen and back to the login window. This only happens with one of the users - I've tried doing a safe boot, running disk utility, and using Time Machine to restore the user's libray back to pre-problem timetable. When I run repair permissions I do gt a SUID file "usr/sbin/vpnd" and "usr/sbin/pppd" have been modified. Any ideas?

Try this...
http://reviews.cnet.com/8301-13727_7-20013630-263.html
If that doesn't help I'd make a new user & use an admin account to move the old folders over & change rights to the new user.

Similar Messages

On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

I managed to boot the computer and get the desktop to show. I now have a "repaired" computer. There are several problems that have cropped up. One is that I can only start up now in Safe Boot mode. Is there a way to turn it off? Also, I do not have a sound list, so I can't access anything requiring audio. Google Chrome only shows up as a white screen. Pictures that loaded before don't load in browsers, etc. Any suggestions? I figure I should reinstall Mac OS Lion for starts, maybe even do a mirror backup and reformat the drive. I think this drive has turned into scrambled eggs...what a headache!

On start up sometimes I get a blue screen and start up hang there

On start up I sometimes get a blue screen and it hangs there the only way to get out of this is to turn the iMac off at the back then when you turn it back on the desk top appears without going through the startup screens. Even had the blue screen when starting in safe mode.

Then run Apple Hardware Test in Extended Mode, it's possible you have a hardware issue. If you still can't locate the issue the next step is taking the machine in for a professional diagnosis at your local Apple Store or AASP.

While finalizing I get the blue screen and my laptop shuts down? HELP!

I pasted the diagnostic thing below but dont understand why I keep getting that blue screen and my computer to shut down on me. I have tried a couple of different brands of c.d.'s and can't figure it out. The computer is 2-3 months old I dont get it. Please help!
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Sony Corporation VGN-FJ290P
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: dvd43llh (3.5.0.0), PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family\Intel(R) 915GM/GMS,910GML Express Chipset
FlashMedia\MSorMSProDevice, Bus Type SSA
IDE\DiskHTS541010G9SA00_______________________MBZOC60D, Bus Type ATA, Bus Address [0,0]
IDE\CdRomPIONEERDVD-RW__DVR-K16D________________1.00___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: PIONEER DVD-RW DVR-K16D, Rev 1.00
Audio CD in drive.
Found 19 songs on CD, playing time 76:13 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:01:65
Track 3, start time 08:02:08
Track 4, start time 11:43:11
Track 5, start time 15:43:55
Track 6, start time 22:23:05
Track 7, start time 25:45:55
Track 8, start time 29:38:08
Track 9, start time 33:28:34
Track 10, start time 37:56:60
Track 11, start time 42:25:28
Track 12, start time 45:26:27
Track 13, start time 49:08:66
Track 14, start time 54:05:27
Track 15, start time 57:58:62
Track 16, start time 60:52:58
Track 17, start time 64:56:31
Track 18, start time 68:26:42
Track 19, start time 73:01:53
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 16 20 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4 10 16 20 24 0.
The drive DVDRW speeds are: 4 10 16 20 24 0.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: PIONEER DVD-RW DVR-K16D on -128(0xffffff80) media at speed 0X.

I recently purchased Norton stuff and loaded it but dont know how to do all that stuff you said to do.
okay.
was that Norton Internet Security 2006? if so, right-click on the yellow ticky-Norton thing down in your task bar, and select "Norton Protection Center". click the LiveUpdate button. install everything it says is available at LiveUpdate. restart the PC if it asks you to.
open Norton Protection Center again. click on "Norton AntiVirus". click on "Scans". click on "Run full system scan".
once that's finished, and you've dealt to everything that shows up, do a spyware scan. if you don't have an antispyware program, download and install the free trial version of Ewido, and scan your PC with that.
ewido anti-malware download
once that's finished, and you've dealt to anything that shows up, go to the Symantec website (they make your Norton), and run one of their online virus scans. they take an eternity, so you may want to do that overnight:
Symantec Security Check
to do a disk cleanup, go "start > all programs > accessories > system tools > disk cleanup"
to run chkdsk (that's a disk checking/repair utility in Windows), close all active programs, go into My Computer, right-click on your hard drive, select "properties", click on the "tools" tab, and click the "check now" button.
to do a disk defrag, go "start > all programs > accessories > system tools > disk defragmenter"
love, b

My ipad mini 2 gets blue screen and then keep restarting over and over again problem

My ipad mini 2 gets blue screen and then keep restarting over and over again problem. I tried to restore to the factory setting but it was not successful to fix the problem. Sometimes I could not even restore. How can I do with this kind of problem?
I'm very frustrated now. Please help me!

I have the same issue and have not found a way to fix it yet. I cant even down grade back to 8.2 because it wont stay on long enough.

HT4848 Hi my name is Hajk and i got a friend that has a problem with her macbook, she gets a blue screen and cant log on. So i told her if she had an reinstall disk so that i could reinstall for her but she didn't get one with the macbook. what can she do

Hi my name is Hajk and i got a friend that has a problem with her macbook, she gets a blue screen and cant log on. So i told her if she had an reinstall disk so that i could reinstall for her but she didn't get one with the macbook. what can she do ?

If this is a fairly new Mac running either v10.7 Lion or v10.8 Mountain Lion she can use Lion or Mountain Recovery to repair the startup disk or reinstall OS X.

My iPhone would just randomly give me a blue screen and then restart--did that a bunch of times between Tuesday and last night. As of last night, it WILL NOT come back on. iTunes says it's in recovery mode....what does all of this mean???

Tuesday night I was texting a friend and when I went to open her message, my screen went blue and restarted. I just wrote it off as weird and went on about my business. Later that night, I tried to turn on my phone and it would not turn on. I plugged it up, held down the power button, and pressed the home button all numerous times. I looked online and it said to do a "hard reset" by holding down the power and home button at the same time--my phone then came on. Throughout Wednesday, it would give me a blue screen and restart--nothing major just really annoying. I took it to the local Verizon store where I bought the phone from and he said that it was some type of hardware defect and I was still under my year warranty so I could get a new one for free--the free phone won't be here until tomorrow, Saturday. I took it home and it didn't give me any trouble for a couple of hours. The next day it was cooperating and then I left town for a little while and it acted up (blue screen and then restarting) a few times. When I got home, it acted up again and so I restarted the phone and it was working fine. A few minutes later, I tried to check my messages and the phone was off again. No matter what I do, my phone will not come back to life. It had at least 45% battery last time I looked at it. I decided to plug the phone up to my computer and see what it did--my computer recognizes that there is a phone hooked to it and it says that it's in "recovery mode". It also said that if I'm having issues with my phone, that I need to reset the phone via iTunes. I guess the questions that arise are
1. Why is my phone doing this?
2. If I reset my phone, will it go back to working again? I ask that because I don't want Verizon to charge me $300 when they send me the replacement phone and I won't need it (assuming that the phone decides to work once it's been reset).
3. What type of hardware defect is this that is causing this issue, not only with my iPhone 5S but others as well?
4. Shouldn't people be notifying Apple and letting them know that they need to fix this issue?
5. Should I report this issue to Apple even though I didn't buy the phone directly from them, but through Verizon?
Any help that anyone could give me would be greatly appreciated! This whole situation has me stressed out and seriously confused.

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then the screen goes black, and "sleep" light pulses.

I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then goes black. The sleep light pulses. From there, I can't turn it off normally. I have tried restarting the PMU. And I have tried unplugging the ac adaptor and removing the battery. From there I have plugged only the ac adaptor in, and it will begin to start but do the same thing once it shows the blue screen.
I tried only using the battery (without plugging in the ac adaptor) and the same thing happens. I tried starting the computer while holding down CTRL, Option, P, and R, waiting to hear the start up chimes 3 times, and then holding Shift as it starts up. But I still get the black screen once I see the blue one, and the computer's sleep light pulses.
I need something very important from this computer. And was able to start it last night. I did not shut down the computer, and was going to take it to a friends to use his printer today. The computer was in sleep mode in the morning.
Thanks for any help!
Gina

What your describing could be a logic board or memory issue.
You did or did not hear 3 startup chimes? If you hear 3 chimes when you start it, that would indicate a memory problem. Try reseating the memory to see if that makes a difference. If you have 2 RAM cards, try one then the other in each slot. If you have 1 RAM card, move it to the other slot. Powerbooks can develop one bad slot.
You may need to pull the hard drive out of the Powerbook, put it into an external case, then read it from another mac.

I have Lion, and I can't see my unread messages count in the dock, even after the preferences set up. I find the Lion Mail too complicated. Leopard was much easier and more simple to use. I only have one account& don't need all the rest. any suggestions

I have Lion, and I can't see my unread messages count in the dock, even after the preferences set up.
I find the Lion Mail too complicated. Leopard was much easier and more simple to use. I only have one account& don't need all the rest.
any suggestions?

weird.
It's so frustrating, I got my Mac Book 5 days ago and I'm already having a discussion in the forum.
Thank you so much for your prompt replies.
It's past midnight here so I'd better get some rest...
Good night captfred!

I go to play on a game on my iPad it will load the game up and a minute later will go to a blank screen and then back to all my apps.does it everybtime? Why is that? What do I need to do to stop it?

I go to play on a game on my iPad it will load the game up and a minute later will go to a blank screen and then back to all my apps.does it everybtime? Why is that? What do I need to do to stop it?

1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two and tap the minus sign to close app.
2. Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo

After wakeup I get a blue screen for a sec then my desktop after; normal?

Hi, I dont remember this happening before, but then who knows.
But, when I wake my computer up from its nap, I first get a blue screen for a second than my desktop appears. Is there a malfunction of some sort?

Hi poops,
I am hoping it is normal, my iSight wakes from sleep the very same way as yours...
I also access an eMac on a regular basis, and when you wake it from sleep it just goes straight to desktop in an instance, while ours go to the blue screen for what seems like an eternity but only a second or so before going to desktop. This is explained by our Energy Saver Preferences, I have my display (5 minutes) and computer (15 minutes) go into sleep mode, while the eMac lets the display go into sleep mode but computer is set to never sleep.
I would say don't worry, if it bothers you, set your System Preferences > Energy Saver > Sleep > Computer 'Never' but set your display to sleep... Good luck, Rick
BTW - I think it is a good idea not to use a screen saver
iMac G5 iSight 20" - 30G iPOD in Slimming Black - Mac OS X (10.4.7) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

Computer goes blue screen and comes back slow

I have a 27 inch 2010 imac and evertime i log in my screen goes blue and my mouse has a hard time moving. Then after a will the screen goes blue again and my computer fine. Then a will after my computer goes blue screen and it slow again. And it keeps doing this like 10 times then it just stopes. I have no clue whats wrong with it??

Hello, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Blank blue screen and then computer crashes.

I'm having a lot of problems with Skype desktop on a Win 7 64 bit machine. It has worked fine on this machine until the past few days.
When I call someone the call connects but i get a blank blue screen and cannot interact with Skype. If I try to access other programmes the computer hangs (the call still continues) and I'm forced to do a hard shutdown.
Also when I go to check the settings it hangs when setting up the web cam.
I've unistalled and reinstalled Skype and the webcam software ensured that I have the latest versions of these and IE.
I have followed the instructions here http://community.skype.com/t5/Windows-desktop-client/Solution-for-empty-blank-login-screen/td-p/1008... and checked that my webcam is operating correctly here http://www.trust.com/en/faq/webcam.
None of this has worked. Any suggestions as to what I should try next.
Solved!
Go to Solution.

Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Hi Today I Bought a Brand New iPhone 5s And It Woked Fine For About 3 Hours And Then It Just Shut Itself Down, It Goes To The Apple Logo Then To The Loading Screen For About 15 Minutes And Then It Shows A Blue Screen And Then Repeats Please Help!

I Was Really Excited About My New Phone And Now It Is Just Completely Messed Up. It Shut Itself Down After About 3 Hours Of Use And Now It Just Goes From Apple Boot Logo, To Loading Screen, To Blue Weird Screen, And Then It Goes Back To The Boot Logo. When I Plug It Into My Computer It Recognizes The Phone But It Doesnt Show Up In iTunes 11 PLEASE HELP

Can you do a Reset by holding the Sleep button and the Home button at the same time for about 20 seconds?

[solved[X superlaggy after hd went out of space, but only for one user

So the netbook (eeepc 1101ha) went out of diskspace while running and froze. I freed up some space and restarted X, but it failed so I rebooted. Same story then. It either loads and becomes super slow or doesn't load at all. I use dwm wm which to my knowledge doesn't save to config files that might have been corrupted during the moment with no diskspace. Other wms have same problems too, but only for that user.
Here are some lines from /var/log/Xorg.0.log/
[ 3068.496] (**) Power Button: always reports core events
[ 3068.496] (**) Power Button: Device: "/dev/input/event4"
[ 3068.507] (II) Power Button: Found keys
[ 3068.507] (II) Power Button: Configuring as keyboard
[ 3068.507] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 3068.507] (**) Option "xkb_rules" "evdev"
[ 3068.507] (**) Option "xkb_model" "evdev"
[ 3068.507] (**) Option "xkb_layout" "us"
[ 3068.683] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 3068.683] (II) No input driver/identifier specified (ignoring)
[ 3068.684] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 3068.684] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3068.684] (**) Sleep Button: always reports core events
[ 3068.684] (**) Sleep Button: Device: "/dev/input/event3"
[ 3068.697] (II) Sleep Button: Found keys
[ 3068.697] (II) Sleep Button: Configuring as keyboard
[ 3068.697] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 3068.697] (**) Option "xkb_rules" "evdev"
[ 3068.697] (**) Option "xkb_model" "evdev"
[ 3068.697] (**) Option "xkb_layout" "us"
[ 3068.700] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 3068.700] (II) No input driver/identifier specified (ignoring)
[ 3068.709] (II) config/udev: Adding input device USB2.0 UVC 1.3M WebCam (/dev/input/event7)
[ 3068.709] (**) USB2.0 UVC 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[ 3068.709] (**) USB2.0 UVC 1.3M WebCam: always reports core events
[ 3068.709] (**) USB2.0 UVC 1.3M WebCam: Device: "/dev/input/event7"
[ 3068.730] (II) USB2.0 UVC 1.3M WebCam: Found keys
[ 3068.730] (II) USB2.0 UVC 1.3M WebCam: Configuring as keyboard
[ 3068.730] (II) XINPUT: Adding extended input device "USB2.0 UVC 1.3M WebCam" (type: KEYBOARD)
[ 3068.730] (**) Option "xkb_rules" "evdev"
[ 3068.730] (**) Option "xkb_model" "evdev"
[ 3068.731] (**) Option "xkb_layout" "us"
[ 3068.742] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event5)
[ 3068.742] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 3068.742] (**) Eee PC WMI hotkeys: always reports core events
[ 3068.742] (**) Eee PC WMI hotkeys: Device: "/dev/input/event5"
[ 3068.750] (II) Eee PC WMI hotkeys: Found keys
[ 3068.750] (II) Eee PC WMI hotkeys: Configuring as keyboard
[ 3068.750] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD)
[ 3068.750] (**) Option "xkb_rules" "evdev"
[ 3068.751] (**) Option "xkb_model" "evdev"
[ 3068.751] (**) Option "xkb_layout" "us"
[ 3068.752] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3068.753] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3068.753] (**) AT Translated Set 2 keyboard: always reports core events
[ 3068.753] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3068.773] (II) AT Translated Set 2 keyboard: Found keys
[ 3068.774] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 3068.774] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 3068.774] (**) Option "xkb_rules" "evdev"
[ 3068.774] (**) Option "xkb_model" "evdev"
[ 3068.774] (**) Option "xkb_layout" "us"
[ 3068.775] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 3068.775] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3068.775] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3068.775] (II) LoadModule: "synaptics"
[ 3068.776] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3068.776] (II) Module synaptics: vendor="X.Org Foundation"
[ 3068.776] compiled for 1.8.0.902, module version = 1.2.2
[ 3068.776] Module class: X.Org XInput Driver
[ 3068.776] ABI class: X.Org XInput driver, version 9.0
[ 3068.777] (II) Synaptics touchpad driver version 1.2.2
[ 3068.777] (**) Option "Device" "/dev/input/event6"
[ 3068.823] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 3068.824] (**) Option "TapButton1" "1"
[ 3068.824] (**) Option "TapButton2" "2"
[ 3068.824] (**) Option "TapButton3" "3"
[ 3068.863] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 3068.864] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3068.880] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 3068.880] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3068.880] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 3068.881] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3068.881] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3068.913] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 3068.914] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3068.914] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3068.914] (II) Synaptics touchpad driver version 1.2.2
[ 3069.383] SynPS/2 Synaptics TouchPad no synaptics event device found
[ 3069.384] (**) Option "Device" "/dev/input/mouse0"
[ 3069.397] (**) Option "TapButton1" "1"
[ 3069.397] (**) Option "TapButton2" "2"
[ 3069.397] (**) Option "TapButton3" "3"
[ 3069.417] Query no Synaptics: 6003C8
[ 3069.417] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 3069.418] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 3069.430] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
[ 3069.430] (II) UnloadModule: "synaptics"
[ 3069.431] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 3069.431] (II) No input driver/identifier specified (ignoring)
Any ideas?
Last edited by idjut (2010-07-13 00:43:04)

R00KIE wrote:
I'm not familiar with DWM but I would look inside ~/.local ~/.config and ~/.cache , maybe something is stored there.
If that doesn't work you may try moving all the hidden stuff to a backup folder and start the X session again.
Something must be causing that and most probably it's some dot file stashed away inside one of those dot directories (you say new users work just fine so it's not a system problem).
Apart from this I'm out of ideas, once I had XFCE (I know its not the same) act really strange and the problem was related with some corrupted saved session file, once I deleted it everything was fine again.
Didn't work! Any other tips, ideas?

After login I get a blue screen and then back to login window, but only for one account

Similar Messages

Maybe you are looking for