After long time i open my ipad ,but showing ipad desactivate what i want to do know,how i can open, after long time i open my ipad ,but showing ipad desactivate what i want to do know,how i can open
after long time i open my iapd,but i canot open,ipad is desactivate,now i can open
I am trying to help you but I want to be sure I understand what is going on. I think that you can't "open" the iPad because you have to enter the PIN for your sim card according to this taken from the web site that I referred you to. If you cannot remember your PIN you will have to contact your carrier for a replacement SIM card.
COPIED FROM THE WEB SITE....
Summary
You can lock your SIM card so that it can’t be used without a Personal Identification Number (PIN). You must enter the PIN each time you turn iPhone or iPad Wi-Fi + 3G off and turn it back on again.
Products Affected
iPhone, iPad, iPhone Activation in iTunes
Note: This information applies only to devices that use a SIM card.
You can enable, disable, or change your SIM PIN in the following locations:
iPhone: Settings > Phone > SIM PIN
iPad Wi-Fi + 3G: Settings > Cellular Data > SIM PIN
Note: Some carriers provide SIM cards with a default SIM PIN already enabled. Contact your carrier to find out what your default SIM PIN code is.
Personal Unlocking Key (PUK)
If you enter the PIN incorrectly three times, you may need to enter a Personal Unlocking Key (PUK) to enable your SIM card again. Refer to the SIM card documentation or contact your carrier.
Note: Entering an incorrect PUK code too many times will result in the SIM becoming permanently locked. If this occurs, you will need to contact your carrier for a replacement SIM card.
Similar Messages
-
Suddenly I can open only one Firefox window at a time. I can have multiple tabs in that window, but I can suddenly no longer open another window. What happened?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
What to do if i get Error 500: javax.servlet.ServletException: Filter [HSBC Filter]: filter is unavailable but at same time it opens from other IPad
Clear any HSBC related cookies from your browser cache and reload the page.
-
How do I view what slide I'm on out of how many I have total in keynote? I know on powerpoint it's at the bottom right of the window but I can't find it on keynote, nor can I find the option to make it appear. Any help would be greatly appreciated.
Your steps so far are OK but you may want to try:
1 Trash your user library Caches folder (House Icon with short name in Finder window (hard drive window)GOTO:House icon > Library folder > caches folder
2 Trash the com.apple.Safari.plist file in User library > preferences folder > Safari.plist as well as removing the library Safari folder its self.
3 you can selectivly re-install Safari 2.0 from your OS Tiger Install disk 1, (see Knowledge base article 301229 for how to just select the Safari Application) without doing a complete system Archive and Install.
4. Create a new Test user account on the system and test how Safari responds in the Test user, see if its a user related issue and not system issue.
5. Still no Safari response? have to do an Archive and install (not preserving user and network settings)article 107120
PS. Issue may be related to actual internet connection connectivity, power cycle cable modem and router or airport if using one as well as the computer(keep unplugged for 3-5 min) and plug the cable modem in and then the router/airport then power on the computer. Do the Airport Admin utiliy (applications, utilities on HD_1)update.
- do a hard reset of airport knowledge base article 108044(Express base) and 107451 (Extreme base)
- Check with internet provider for connection issues "cannot find server" ect. -
I updated my iPhone software and now it is saying that I need to connect it to iTunes. I no longer have my computer with my iTunes on it. What can I do? I really don't want to lose my data! I wouldn't have updated if I had known but there was no warning.
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694 -
iPad running iOS 5 has on the menu bar only have 4 icons, being: back, forward, bookmarks, and the "add to bookmarks", but is missing an icon after the "add to bookmarks" arrow, that is a "show all open browser windows" icon. How do I get it in my safari?
What you are seeing is how Safari works now in iOS 5. There is no way to get that icon in Safari now. There other much better browsers available in the App Store. Look at iCab Mobile, Mercury, Atomic, ....
I have been running iOS 5x for so long now, that I don't even remember if that icon did appear in earlier iOS versions -
I know this is going to sound stupid but I can't seem to set up my email as an iCloud email account. I want to eliminate my aol account and transfer everything to iCloud with an iCloud email. How do I do this.
If your Mac is running OS X 10.7.5 or higher, you first have to go to System Preferences>iCloud, sign in with your Apple ID to create your account, then check Mail. This will automatically add an iCloud email account.
To transfer your AOL mail, you need to drag and drop them into the same folder in the iCloud account. If you have any folders in your AOL mail, you would need to create folders by the same name in the iCloud account, then open each folder, select all the mail in the folder and drag and drop them on the folder by the same name in your iCloud account. (To create a folder in the iCloud account, click the "+" at the bottom of your folder list, choose Create Mailbox, choose iCloud as the location and give it a name.) -
How can I get my time machine to allow me to recover files again?
After upgrading MBA to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.
I've searched and can not find a solution to the problem that's being encountered.Yeap that all makes sense now.
Do you only have the current backup showing in the TM display?? Won't it fill in the rest?
Over wireless are you waiting for the indexing to finish.. ??
Previous backup may not show for a couple of hours.
Long short of it.. Mavericks version of TM is a pain.
Sometimes it is easier to completely ignore the TM backup and do the restore manually.
I have posted the details here. See if this helps.
Can't access old files on time capsule -
Good evening,
after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures. Therefore, I would like to use 9.5 just by by clicking on the icon down my finder and not by being obliged to open my hard drive.
Would you please tell me what I should do. Thank you.
Best regards,
RobertHuh?
As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures.
So, you have restored 9.4.3 from Time Machine but can see all your pictures in 9.5?
Do you have two version of iPhoto on your Machine?
And if you didn't update the Library, ("as it did not work out,") how can you see things in 9.5?
So, whatever set up you have is confusing. -
contact from my phone book just disappeared.dont know how ..and it happen second time in 1 month time. Apple customer service in India is crap... Sorry to say but 700 contacts got disappeared.can someone tell me how to get this contacts back on my phone.plz
the same problem happened to me also, i felt that while playing hay day, if some calls came in between and if i answered the call, the setting of all the icloud items turns off. (i have backup of all the items on icloud), after deleting the account and making settings of mail, contact, calander etc on on mode and after rebooting the phone, it again download from icloud server. but it is just a headache. do not know how to handle this.
-
I'm confused about sound on my iPad 2. I know it has speakers and it makes sounds for notifications, etc. But when I play the Time Warner TV app, there is no sound. Do I need to buy speakers or headphones?
Here is my situation, iPad 1 Time Warner app works fine with or without headphones, ipad2 I can unplug headphones and it works but when headphones are plugged in I can barely hear it even cranked up, my husbands ipad2 works fine with both so what that tells me is that there is something physically possibly programmed differently. It really makes no sense. I might just take my ipad2 back and swap it out. It is weird all the other sound through the iPad comes through on headphones and speakers fine. You are not alone with your time Warner app sound issues.
-
I have a new iPhone for work, set up on a new iTunes account (PC). I was told i can associate it to my home iTunes account (iMac) but don't know how. I want to save the work related apps as well. Any advice? Thanks
Thanks. I messed up with my husbands iphone because I was told the wrong thing. Now everytime I sync his phone it makes it look just like the other phone I had. Do you know how I can fix taht for his phone? Any settings I can turn off that will prevent all of my apps/contacts, etc from auto populating his phone?
-
i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner
Please post (a relevant section of) it right on this Forum.
-
my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges
yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute -
i did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb
That does not work on model year older then 2010 and really doesn't work on any older then late 2011 models.
You will need a set of original system dvd disc thjat are always sypplied with every mac sold before Lion came out. Systems older then late release early 2011 models.
If you don't have them you kcan order a replacement set from apple by calling them. Have the serial number of you mac handy. -
My mini ipad is stuck at apple logo its ios 7.0.4 ive tried to restore it 2 times but its kept stuck what should i do now ? I became so afraid
Ive hold the two buttoms and it went to recovery mood and then i did restore but its again stuckiPad: Basic troubleshooting
http://support.apple.com/kb/TS3274http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtmlhttp://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom
Maybe you are looking for
-
ESYU: PO line/shipment가 Item supply/demand에 보이지 않는 경우 add/correct 하는법
Purpose Oracle Purchasing - Version: 11.5.10 Purchase Order Line/Shipment가 Item Suppy/Demand에 나타나지 않을때 missing supply를 add 하거나 correct 하는 방법에 대해 알아본다. Solution 1. Record 확인을 위해 아래 query를 이용한다. Approved POs에 대한 Missing Supply: SELECT DISTINCT poll.lin
-
How to make 3 similar fun's does generate different sql string in 1 db call
Hi All, In my sql package I'm using 3 different functions to create two different sql strings and the 3rd function does some percentage calculations. My Db architect on code review suggest me that those two functions are almost the same except the sq
-
Static Settings: Shows comments & Insert Page
We create a .pdf from Illustrator with no comments, then our QA dept reviews the .pdf and makes comments. We open up the PDF and review the comments and check them off as we complete them. When i open the the .pdf though I have to click on the 2 tal
-
I have an SQL script select substr(e,5,2) || '-' || substr(e,1,4) period_entered, r region, count(q) Count_of_quotes from ( select distinct sps.region_code r, to_char(oq.date_entered,'YYYYMM') e, o
-
My iPhone 5c rear camera won't work and the led light doesn't work either
At first just snapchat wouldn't work and then I tried my actual camera and neither camera worked. I turned it off and on again and the front facing camera works but the rear facing one doesn't. Snapchat wont use either one. Then I pulled up my settin