After LV 5.1 install, get message, "nimax.exe-entry point not found."

Just installed LV 5.1 on customers PC. She already has LV 6.1, and 7.1 installed. Upon reboot, at login screen, the error message below occurs:
"nimax.exe-entry point not found"
"The procedure entry point?GetVirtualChannelObjectOnServer@CNIConfigData@@QAEKPBD0@Z could not be located in the dynamic link library nidaqcfg.dll."
I have tried installing the latest version of MAX. No luck. Any help would be appreciated.
Mark
Attachments:
Ann's.doc ‏30 KB

Hi Marxs,
My first suggestion would be to avoid installing LabVIEW 5.1 if possible. This for a few reasons...
LabVIEW 5.1 has the option to install DAQ with LabVIEW. If you elected to install NI-DAQ with the LV 5.1 install, you will run into driver conflict problems.
If you want to use DAQms with LabVIEW 7.1, you will need to install NI-DAQ 7.1, 7.2 or 7.3. You can also use NI-DAQ 7.3 with LabVIEW 6.1. However, NI-DAQ 7.3 will NOT install support for LabVIEW 5.1. This means that you will not be able to use your DAQ devices in LV 5.1.
If you need DAQ for LV 5.1, you will need to go back to NI-DAQ 6.9.3. This version will work with 5.1 and 6.1, but you will loose functionality in LabVIEW 7.1.
My suggestions would be as follows:
-- uninstall LabVIEW 5.1 and all versions of DAQ that are on the machine
-- re-install LabVIEW 5.1 but choose the "custom" and elect NOT to install DAQ
-- Install NI-DAQ 7.3 and have support for 7.1 and 6.1 (no support for 5.1 is available)
Basically, when you try to mix these very old versions of LabVIEW and DAQ with the newer stuff you will run into driver conflicts that can be unpredictable.

Similar Messages

  • I am getting message iTunes.exe - Entry Point not found

    I have search for the QTCF.dll file and I can only fine it in: C:\Program Files\QuickTime\QTSystem
    Do I need to remove this file for it to work?

    What's the precise text of your "entry point" message please, olivia? (That mitght give us additional clues as to what's going on, with any luck.)

  • After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."

    After installing the current version of iTunes, I get an AppleSyncNotifier.exe - Entry Point Not Found error. It says "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Kindly advice a process to get rid of this error, without losing my files on the iTunes.

    Hi, I get the same error EVERY time iTunes updates.
    I have to do the fix that is suggested in this topic (cut and paste the sqlite3.dll)
    My Question:
    Since this happens every time iTunes updates...... Do I have to remove SQlite3.dll from the "apple application support" folder....... so that the sqlite3.dll is only located in the "mobile device support" folder?????
    It is getting really annoying to have to do the "cut and paste" fix every time iTunes updates.
    Thank You,
    Steve

  • TS1286 At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found"  My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

    At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found"  My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

    I think my problem is fixed now.
    For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
    A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
    I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
    So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

  • Updated itunes and getting errors messages: iTunes.exe-Entry Point Not Found

    After updating itunes, I get the message iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
    Then another error message tells me: iTunes not installed correctly. Please reinstall.  Error 7 (Windows error 127). I've tried to repair which looks successful until I try the desktop shortcut as well as going into the exe file in program files. Still the same message.  Operating a windows XP service pack 3 with 32 bit. Help would be most appreciated.--No problems with itunes until this recent update.

    iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • When starting my computer I get the error message "AppleSyncNotifier.exe Entry point not found. this has only appeared since my last upgrade.

    Since recently upgrading to the latest ITunes,on start up I get an error message:
    "AppleSyncNotifier.exe Entry point not found .
    Procedure entry point xml TextReader Constname could not be located in
    the dynamic link library libxml2.dll"
    Any body come across this? Any solutions? 

    Doublechecking, Dad:
    I have also reloaded all other iTunes software.
    Did you use the following document as a guide?
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    (If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.)

  • When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

    When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

    Any answers how to fix it? All Im getting is error for the past 3 days!

  • When I turn on my computer I get the message APPLESyncNotifer.exe   Entry Point not found.

    Have a 5th generation nano and when I connect to my computer I get a message APPLESyncNotifer.exe  Entry Point Not Found. Not a computer geek so I am stumped. Anyone out there who could help? I have reinstalled ITunes and restarted my computer to not avail.

    Copying & pasting SQLIte3.dll worked out well for your computer?
    Just read your trouble with your iPod nano 5th generation & Windows PC, how about trying the one I found on this community before?
    Click the start button and type in 'msconfig' in search, and, in system structure utitily, click on the tab of 'startup' and check off the box of 'AppleSyncnotifier.exe' and reboost your system.(You have to follow down till the end of the place of the file.) That'll solve your trouble.
    I don't know you connect iPad or iPhone at all, that may change the solution? Hoping this suggestion also work out for you & your PC.

  • NImax.exe entry point not found TDMS_GetDataValueEx in cviTDMS.dll

    I have a remote PXI-8108 and I'm trying to create a task in MAX.  I have no other tasks as this is my first attempt at creating one.  The following sequence is performed on the remote system:  left click on the PXI-6713 under "NI-DAQmx Devices" --> create task --> generate signal --> analog output --> voltage --> ao0 --> default name of "MyVoltageOutTask"  --> click "Finish"
    An error window titled "NIMax.exe - Entry Point Not Found" pops up with the following message:  The procedure entry point TDMS_GetDataValuesEx could not be located in the dynamic link library cviTDMS.dll.
    The only option is to click "OK", at which time the box continually reappears.  the only way to get rid of it is to kill MAX in the windows task manager.  When I restart MAX, the remote system data neighborhood has a broken task under it, and clicking on it locks the program up (needs another kill in windows task manager).  The only way to get rid of it is to reset the remote system's DAQmx configuration and start over.
    I have reinstalled  NIDAQ 8.9.0, reset the remote system configuration in MAX, updated/reinstalled all the software on the remote system (so that it matches the host system).  not sure what else to try.  I figure this should be an elementary step:  I've done it plenty of times with simulated devices on a host system.  Not sure why the remote system is giving me problems.
    Solved!
    Go to Solution.

    I was able to do this on an 8196 controller no problem with DAQmx 9.0 on the controller and my computer having 8.9.5.  Updating to 9.0 or even 8.9.5 should update MAX and hopefully get rid of what you are seeing.  You are correct that the host and controller should have the same driver version so make sure you update both of them together.  It is quite strange that the error is linking to a LabWindows/CVI dll file.  Are you using CVI RT on the controller?
    Doug Farrell
    Product Manager - Condition Monitoring
    National Instruments
    National Instruments Condition Monitoring

  • Error Message: EdgeAnimate.exe - Entry Point Not Found

    I'm running 64 bit MS Vista Ultimate. My original download of Edge Animate ran okay . However after running the most recent update, Edge Animate will no longer launch. Below is the error message:
    EdgeAnimate.exe - Entry Point Not Found:The procedure entry point GetGestureInfo could not be located in the dynamic link library USER32.dll.
    Any one have a fix?

    This was reported last week in the Edge Animate forum by Vista users
    http://forums.adobe.com/message/5074933
    Adobe Edge developers says they're aware of it but no fix yet that I have seen.
    I suggest you join that thread and monitor developments there.

  • When I start my computer I get a "AppleSyncNotifier.exe Entry Point Not Found message.  I also get an error message when trying to sync with iTunes that a backup session cannot be started.  How do I fix this?

    In the last few days when I start my computer, I get a box that opens with "AppleSyncNotifier.exe" Entry Point Not Found in the title.
    It says:  "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll.
    I have tried uninstalling and reinstalling iTunes and still get an error message when trying to sync my phone with iTunes
    "iTunes could not back up iPhone ####, because a session could not be started with the iPhone."
    The last time I tried to sync my phone (iPhone 3G S) with iTunes, everything seemed to freeze up at Stage 4 of the sync process. 
    Any advice????

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • I'm getting the following error message: AppleSyncNotifier.exe - Entry Point Not Found.  What do I do?

    I recently upgraded the o/s to 4.3.5 but now get the following error message, what do I do?
    AppleSyncNotifier.exe - Entry Point Not Found
    The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

    Hi Molly - I can tell you're frustrated and I will do my best
    Can you tell me whether you have a 32bit or 64bit system. You can find out in the following way
    Windows Vista or Windows 7
    If you have Windows Vista or Windows 7, there are two methods to determine whether you are running a 32-bit or a 64-bit version. If one does not work, try the other.
    Method 1: View System window in Control Panel
    Click Start, type system in the Start Search box, and then click system in the Programs list.
    The operating system is displayed as follows:
    For a 64-bit version operating system: 64-bit Operating System appears for the System typeunder System.
    For a 32-bit version operating system: 32-bit Operating System appears for the System typeunder System.
    Method 2: View System Information window
    Click Start, type system in the Start Search box, and then click System Information in thePrograms list.
    When System Summary is selected in the navigation pane, the operating system is displayed as follows:
    For a 64-bit version operating system: x64-based PC appears for the System type under Item.
    For a 32-bit version operating system: x86-based PC appears for the System type under Item.
    If you have a different OS (operating system) let me know which one and I'll tell you how to find that out.
    Once I know I should be able to give you the fix.
    Cheers

  • I keep getting error message "AppleSyncNotifier.exe - Entry Point Not Found" every time I start up my computer. How can I fix this

    I recieve this message every time I start my computer, AppleSyncNotifier.exe - Entry Point Not Found. How can I fix this?

    No problem.
    You can either get it via Apple Software Update ("Start > All Programs > Apple Software Update" ... it'll appear in the "New programs" section) or by downloading an installer from the following page on the Apple Website:
    http://support.apple.com/kb/DL769

  • When trying to use MobileMe I am getting an error message: AppleSyncPref.exe - Entry Point not found  Can you help?

    When trying to use MobileMe I am getting an error messgae: AppleSyncPref.exe - Entry Point not found  Can anyone assist?

    MobileMe no longer exists...that system was discontinued and merged into iCloud.
    Your old MobileMe email addresses shoule still be valid, or convert into some form of user@ me .com or icloud . com.

  • Anyone had this error message AppleSyncNotifier.exe - Entry point not found?

    I use a windows 64bit laptop with Itunes. Recently I have been receiving an error message titled "AppleSyncNotifier.exe- Entry Point Not Found". The sub text is "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll" I am not sure why it is appearing and I cannot tell what is happening.  Anyone have any suggestions? And yes I have removed, installed, removed, installed and removed and installed ITunes for 64bit. Your advice welcomed and appreciated in advance!

    Doublechecking, Dad:
    I have also reloaded all other iTunes software.
    Did you use the following document as a guide?
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    (If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.)

Maybe you are looking for

  • Open new jframe doesn't work when put into jar

    I cant get my program to open up a new frame. When i run my program from netbeans it works fine but when i put it into an executable jar it doesn't work. I have three frames, Main, About and SelectLanguage. From Main i can create a new instance of th

  • Can't drag items from desktop to Captivate 6.1 64bit

    I updated from Captivate 6.0.1 to 6.1 (both 64 bit) and can no longer drag items from the desktop or Adobe Bridge to a Captivate project.  I reinstalled 6.0.1 and could.  Again updated to 6.1 and again could not.  The Import to library button and the

  • Adapter Framework Service Not Starting!

    Hi, We are currently experiencing a critical failure of our XI 3.0 production server. It was taken down for maintenance over the weekend and when it was brought back up we are receiving the error: com.sap.engine.frame.ServiceException: <--Localizatio

  • Reversing Accruals F.81 as a Periodic Job

    Hi Guys, We want to run F.81 , reversing the recurral entries , on a periodic basis. We want to set it as a background job and make it run periodically so that even if the users forget to run the reversals on the first of each month, this process wil

  • How to connect Webi Report into SAP Portal?

    Dear Gurus, i would like to connect Webi Report into SAP Portal. Could you please give me the steps to follow to acheive that requirement or send me some documents? Thanks