After major crash - new hard drive now reinstalling software

Running 10.5.8 on G5. Installed iTunes 8.2.1 and will not open because it requires Quicktime 7.5.5 or later. Stupid!!!! I am running 7.6.4
Why won't it work?

Yeah, I checked iStat Pro on a factory 12," and noticed iStat Pro just doesn't work for the fan thing. So that can be ignored.
The weird thing is the problem didn't happen on mine the first time I turned it on after installing the hard drive. The problem then was I had left the install DVD in the drive and it had jammed. After that magically popping out the next time I took out the battery, the fan problem has been there ever since. Tonight sleeping was like sleeping on a busy airport's runway!
Somebody please help! Thanks!

Similar Messages

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Help! Help! Help! Can not reinstal vista after replacing a new hard drive

Can not reinstal vista after replacing a new hard drive (1TB WD 10EZEX) in HP Pavilion a6658f Desktop PC with recovery disc.
I saw in the screen:
"Windows setup could not configure windows to run on this computer's hardware"
Product:
HP Pavilion a6658f Desktop PC
OS: pre-installed window vista with sp1
Product number: FK575AA
Bought in Canada
Thank you.

Thank you so much Lisa27,
win vista installed to new WD 1tb hard drive. How?
1. use http://support.wd.com/product/download.asp?groupid=606&lang=en
>Data Lifeguard for Windows , write zero and to test the new hard drive,
2. use Acronics true image 2013 to do partition on the new HD, and then to clone from the old HD to new HD.
3. down load Intel Rapid Storage Tech to fix the Issues with Windows Vista* and Intel® RAID (without it, Window mail can not be opened.
Thank you very much for all your guys again and the support form WD support team.

New Hard Drive -- Now I can't work on iPod Touch

Recently my Windows computer crashed and burned, and I had to install a new hard drive and reinstall the operating system. Now when I plug in my 1st generation iPod Touch and go to the Apps tab, it shows my four screens with apps, but they are faint and I can't click on them to move them around or anything.
I downloaded the latest version of iTunes, and synched my Touch, and all seemed to go well.
How do I rectify this? Thanks!

This completely *****. iTunes lists none of my music, although the music is on my iPod. When I click on the sync button, it starts to sync -- for about 5 seconds -- and does nothing. So I had to manually import all of my music from my hard drive into iTunes, but it still won't sync. Same thing with videos and photos.

Trying to restore after getting a new hard drive. I can see the backup on the Time Capsule and on the correct date but it is Greyed out. That is it wont let me open it and restore the machine. Have tried also Migration Assistant, no luck.

Trying to restore after getting a new hard drive. I can see the backup on the Time Capsule and on the correct date but it is Greyed out. That is it wont let me open it and restore the machine. Have tried also Migration Assistant, no luck.

https://discussions.apple.com/thread/5210788?tstart=0
At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks.

Windows 7 won't load after installing new Hard Drive and Recovery software

HP G72 Notebook PC
xz218UAR
I guess a virus crashed my hard drive so I bought a new one. I installed the new drive and loaded the recovery disks that I also bought from HP. Apparently Windows didn't load properly and it keeps telling me to RELOAD WINDOWS. I've tried starting over from Disk 1 but it's not doing anything different to fix it.
I removed the new hard drive and reinstalled it but it's still doing the same thing.
What am I doing wrong and HOW DO I FIX IT?

Hi,
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Setting up time machine/time capsule after fitting a New Hard Drive.

I have replaced my hard drive in my imac 24inch and restored the system from my time capsule. My question is now my time machine is trying to back up to my time capsule but it is already 3/4 full from the old drive in my imac. How do i best set up my time capsule with time machine after installing a new hard drive in the imac. I was hoping that i would restore the system and I would still be able to (after pointing time machine to my time capsule) access old files if needed in time machine. It has presently deleted a lot of older backups but still cannot fit it all in as it just sees a new hard drive worth of info and is attempting to back it all up on my time capsule.

wjosten wrote:
Me, I would never use Time Machine to do this. What I'd suggest you do is get an exterior enclosure for your new drive. Then use either Carbon Copy Cloner or SuperDuper to clone your existing drive to your new drive. Once done, verify your clone is bootable & all of your data present. Then swap drives & use your old drive for Time Machine backups(after erasing it). Then get another drive & exterior enclosure to regularly clone your new drive to.
Unless he was swapping for a lower capacity HDD or to a lower capacity SSD, then the old drive would make a lousy Time Machine disk. However, whenever I swap out a disk I do exactly what you do. CCC to get the ol drive onto a new one. Test by starting up to the new (but still external drive). Then replace the internal drive.
I usually just sell the old drive on eBay. My Time Machine backup is always 2X the size of the internal drive, which I believe is a bit above recommendations, but works for me. The price of large external drives is almost the same as smaller internal ones.

I have recently restored everything on my iMac after getting a new hard drive. When i try to use Elements, i get the following error code ERROR 150:30. Any ideas?

I have recently restored everything on my iMac after getting a new hard drive. When i try to use Elements, i get the following error code ERROR 150:30. Any ideas?

Did you use migration assistant to copy over programs, documents, and settings? You can't do that with PSE. Elements is not a tidy package in accordance with the apple developer guidelines. The installer strews stuff all of your hard drive in place the migration assistant isn't programmed to look and you can never hope to find all h the bits. You must always install PSE from scratch on a new machine. By attempting to copy it you have made a lot of trouble for yourself.
You will need to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
and then you can go around and manually remove what you can reach. Look in applications, your hard drive>library>application support>adobe, your username>library>preferences. In the user library also delete any saved application states for PSE.
Then you can reinstall from scratch.

I cannot access an older time machine backup after installing an new hard drive.

After installing a new hard drive I tried to access my older backups in time machine but cannot. They are there but do not light up and allow me to access them, or select them.

First, if you're worried about the possibility of losing a backup set, then your backup strategy is inadequate. You will certainly lose those backups, no matter what you do, when the drive hosting them fails, as it will eventually. If you take data safety seriously, you should have at least two complete, independent backups of all your data, one of which is off-site at all times. I suggest you make a second backup now, before doing anything else.
The action I suggested won't delete all the snapshots; only the selected one -- unless something goes wrong, which is always possible. Without adequate backups, nothing you do is safe.

After installing a new hard drive can I install snow leopard directly from snow leopard disc

After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
(64305)

What to do after installing a new hard drive on inspiron 1525

after installing a new hard drive on my inspiron 1525 I place the drivevers and utilities driver on the cd/dvd player drive, chose boot from cd/dvd drive, and I get this message
your cd/dvd drive during this boot cycle is f:
a RAMDISK drive is available for this boot cycle as C:
it contains several hard drive setup tools. Please use these tools only under the direction of dell support staff.
F:\>
What do i enter after F:\> ?????????
<ADMIN NOTE : Email Id removed per Privacy policy>

Hello Warren,
To understand the issue and help you further, I would request you to help me with few details about the issue.
-- What exactly is happening when you turn on the computer?
-- Do you see a black screen with a blinking cursor?
-- What is the Operating System?
-- What is the System Model?
Run a hardware diagnostics to check if there is any hardware failure.
-- Restart the computer.
-- Keep tapping F12 key on the Dell Logo screen.
-- From One Time Boot Menu, select Diagnostics and press Enter.
-- If the test fails please capture the Error Code and write back to us would be glad to assist with the next course of action.

Aready had an account my computer crashed and had it repaired they put in a new hard drive now I can't install the new download how do i fix this

Already had an account had to have a new hard drive put in my lap top they wiped out my info I need to install the new download
but I keep getting an erroe message " unable to download itunes 64 setup exe. The connection to this server was reset". What do I do?

This completely *****. iTunes lists none of my music, although the music is on my iPod. When I click on the sync button, it starts to sync -- for about 5 seconds -- and does nothing. So I had to manually import all of my music from my hard drive into iTunes, but it still won't sync. Same thing with videos and photos.

Installed New Hard Drive, Now Can't Install Snow Leopard

Hi All,
Had to install a new hard drive in my system (15" MacBook Pro Early 2010 Model), so I followed the instructions to put in the drive and that worked just fine. Now I need to reinstall Snow Leopard, which isn't working. Here's what I've tried...
1) Boot from the install disc by holding down the "C" key when powering on the system. I hear the drive spin for a little bit, but then it stops spinning and nothing else happens...I just get the Apple logo.
2) Made a bootable USB drive using directions found online. Plugged that bad boy in, held the "Option" key down, and powered on. Got the option to choose the drive as my boot drive. Selected that, and nothing happens. Just get the Apple logo again.
Any thoughts on what I need to do next? Never experienced such a thing.
Appreciate the help.

Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting has completed quit DU and return to the installer. Install OS X.

New hard drive, now what??

HELP! Just had to have a new hard drive on the computer. tried moving itunes........finally got the playlists/etc to work - but, I have many duplications of the playlists (manually deleted those already) and the "date added" is now a new date for every stinkin' song.
a few questions:
***is it possible to have moved the file from old data file to new hard drive, import media into itunes and keep the "date added" that was originally attached to each song?? (or still do that???)
***also, after doing the reinstall and the importing media, I ended up with 3-4 copies of playlists when I opened up my itunes. Manually deleted them, but wondering what I did to get them there in the first place.
***and, now that the songs are there - I can't edit anything as I was able to before. Everything is "gray" and won't let me edit. I tried following the directions (in forum) to change from read only but my computer wasn't agreeing. any tips on how to do this?? the only thing that comes up when I follow the directions is "owner" - none of the other users on the computer. Running Windows 7.
thanks - I appreciate the help - computers aren't my strong-point. this is really frustrating!!

....Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. Use the Change Permissions... button grant to your account...
Do you get the Change Permissions button? Once you've done that there should be options to add additional users and adjust their permission levels.
tt2

ITunes moved to a new hard drive, now acting like a newly installed program

I just moved my ITunes to an external hard drive and followed all the directions to do so (did a google search and it lead me to this site where I followed the instructions outlined). Now ITunes won't work, it won't access any music whatsoever. In fact when I open ITunes it's appearance is that of the freshly installed program and no songs at all come up under music
I decided I had to have the space because I only have an 80 GB drive (C) and my music files occupy 52 GB of that (ITunes accounts for 2/3 of that 52GB total for some strange reason)
The new hard drive (F) is an HP Simple Save and that program backed up all my C drive information (including ITunes).
Then I followed the instructions I found on this site. I went in, identified the new folder, consolidated the files and nothing. When I restarted ITunes I got the screen above
So I tried putting ITunes back on the C drive and reset ITunes using the reset button under "Edit, Preferences, Advanced" and that still doesn't work. Not to mention I now have ITunes buried under a mountain of sub folders
I am at my wits end with ITunes. My first IPod was a gift (my seond I had to buy after washing my first) but ITunes has been nothing but trouble the whole time and now this!!!!!!!
Can someone please help me????????????? I like my IPod, I on't want to have to get rid of it and buy an MP3 player that works with Windows

My Library files are still on the C drive as the instructions said to leave them there
While it is implied that I can move ITunes music files off my C drive to make more space
Quote: "If your hard drive is nearly full after loading all your music and other media into iTunes, or if you just want to move all those music and media files to another hard drive on your system, here's a way to make the move while retaining all your playlists, ratings, and play history."
In fact I now see that ITunes Help seems to suggest something different. I got here by pressing the question mark while in the pop up box for "Edit, Preferences, Advanced"
Quote:
"By default, songs and other files you import into iTunes are placed here:
My Documents/My Music/iTunes/iTunes Media
Hide
To change the default location of imported files:
Choose Edit > Preferences, and click Advanced.
Click Change and select a new location for your files.
From now on, new songs and other items you import are stored in the new location. Songs you’ve already imported stay in their current location. (emphasis mine)
To restore the iTunes Media folder as the default storage location, click Reset (in the Advanced pane of iTunes preferences)."

After major crash - new hard drive now reinstalling software

Similar Messages

Maybe you are looking for