After MAR upgrade from 4.0 - 7.0 login to ars_db fails

Hi,
After MAR upgrade from 4.0 -> 7.0 login to ars_db fails with the message "inconsistent database structure". For me it is a bit weired to do the ars_db upgrade to 7.0 SP4 and then start the transport agent which is still in the 4.0 level but this is the way it is described in the upgrade guide in order to delete Blobs after MAR upgrade.
Is the guide here inconsistent? Don't we have to upgrade the tools and services first before deleting Blobs?
Did anyone experience similar issues?
Regards
Whity

Hello Whity
After upgrading the MAR,To upgrade the MRS Tools and Services follow the steps below:
1. Stop and uninstall the 4.0 Transport Agent Service. Use the Transport Installer to
uninstall the above services.
2. If you are not able to uninstall the TA, uninstall the service manually using the following command sc delete [service name]
.Also check that there are no entry for that service at the registry location HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
3. On your local copy of the Upgrade DVD open the folder Mobile_Client_Upgrade\UpgradePurposeOnly . If you upgrade from CRM 4.0 you have to run SETUP.exe. If you upgrade from a higher release you have to run UPGRADE.exe
4. Install the Transport Service again after MRS tools and services are upgraded to 7.0 SP 04.
In your case, TA was not uninstalled pripr to the MRS tools and servcies upgrade.Hence you still see 4.0 TA. Please follow the above steps to solve the issue.
Please refer to the section 5.2.7 section of the upgrade guide document for more information.
Regards
shankar

Similar Messages

  • Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

    Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013 
    Newform.aspx of list:-
    Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

    Hello dcakumar,
    Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
    - Dennis | Netherlands | Blog |
    Twitter

  • Not able to sort any grid after Tools upgrade from 8.49.10 to 8.50.07

    Not able to sort any grid after Tools upgrade from 8.49.10 to 8.50.07, also when I click on any prompt button the prompt values are displaying in a separate screen rather than displaying in a model window.

    I have resolved it by applying stylesheets and clearing the cache.
    Thanks,
    Jayaprakash Tedla

  • Running Lightroom 6 on Windows machine (after having upgraded from LR5... While attempting to add or change music in the Slideshow module, LR unexpectedly quits.  After several attempts at this, LR6 won't even launch properly...shows the splash screen but

    Running Lightroom 6 on Windows machine (after having upgraded from LR5... While attempting to add or change music in the Slideshow module, LR unexpectedly quits.  After several attempts at this, LR6 won't even launch properly...shows the splash screen but that's it.  The program is buggy...need an update/revision quickly!!

    If you're on Windows, check out a free program called Audacity--it's fantastic.  With Audacity the process of converting a 48.000 kHz to 44.100 kHz is as simply as opening, changing the sample rate, and then exporting again, as an MP3.

  • Iweb doesn't see my old domains under 10.9 after the upgrade from 10.7 Please help

    Hi everybody,
    iweb doesn't see my old domains under 10.9 after the upgrade from 10.7 Please help
    It gives me an option to choose a domain but when I go to "sites" it doesn't recognize none of them.
    Thanks :-)

    In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • After I upgrade from tiger to snow leopard, my macbook pro more often freezes. Any solution? Do I need to increase memory? If so, how?

    After I upgrade from tiger to snow leopard, my macbook pro more often freezes. Any solution? Do I need to increase memory? If so, how?

    After I upgrade from tiger to snow leopard, my macbook pro more often freezes. Any solution? Do I need to increase memory? If so, how?

  • TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

    My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix.  I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z.  Any help? Thanks.

    after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
    i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
    so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
    the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
    basically everything is clean now. At least i hope and works fine. touch wood!

  • SQ03, user group removed after release upgrade from 4.6C to ECC6

    Dear All,
    I have a problem about user group - transaction code SQ03.
    After the release upgrade from 4.6C to ECC6 the user group, that I created in the old system, are not present in quality and production environment.
    In the development environment there is the user group but doesn't contain the queries that I created in the old environment.
    How can I solve this issue?
    Can I recover all missing queries?
    (moreover I can access to the old environment)
    Thanks in advance.
    Regards

    Hi
        Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable.  Hope this will resolve your issue.
    Regards,
    JB

  • Mars upgrade from 5.3.2 to 6.0.1

    Hi all
    I have mars version 5.3.2 and I need to upgarde it to the version 6.0.1 to be supported with CSM 3.2.1
    My questions:
    1- Is Mars 5.3.2 not supported on CSM 3.2.1?
    2- Can I upgrade from 5.3.2 to 6.0.1 directly?
    3- How to upgrade? steps please.
    Thanks on advance,

    If Gen 2 is running a version other than 5.3.6, upgrade to 6.0.1 is not supported. You should upgrade from earlier versions of 5.x to 5.3.6. See the Release Notes for Cisco Security MARS Appliance version 6.0.1 for upgrade procedure.
    Upgrade from 5.3.6 to 6.0.1. For details on upgrading from 5.x to 6.0.1, see the Release Notes for Cisco Security MARS Appliance version 6.0.1.

  • Server 2012 X64 R2 DNS Server keeps shutting down after inplace upgrade from Server 2012 X64

    Hi,
    ever since upgrading from Server 2012 X64 to Server 2012 R2 X64 my dns server keeps shutting down every several minutes before having to do a restart.  When viewing the event log this is all I see..
    The DNS Server service terminated unexpectedly.  It has done this 497 time(s).  The following corrective action will be taken in 60000 milliseconds: Restart the service.
    if I look in the Application Error Log,  I will also find the following:
    Faulting application name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
    Faulting module name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
    Exception code: 0xc0000005
    Fault offset: 0x000000000010b0e0
    Faulting process id: 0x1740
    Faulting application start time: 0x01cf531b2e3a7f5e
    Faulting application path: C:\Windows\system32\dns.exe
    Faulting module path: C:\Windows\system32\dns.exe
    Report Id: 90a4ab37-bf0e-11e3-9446-003048df3f03
    Faulting package full name:
    Faulting package-relative application ID:
    I have tried removing and then reinstalling the DNS Server role, but the same situation occurs..
    thanks,

    Hi,
    I'm going crazy,  I've upgraded my Server 2012 Standard to Server 2012 R2 Standard and now my DNS server keeps crashing since the in place upgrade.  I have finally narrowed it down to it only crashes after several minutes if I load the data from
    a file instead of the registry.  As a test I:
    -1- killed all my dns data,
    -2- uninstalled the dns server role
    -3- deleted the /windows/system32/dns directory
    -4- reinstalled the DNS server role
    -5- used the wizard to create a DNS server and a forward zone.
    everything works okay, no crashes,  then I change the advanced propertied of the DNS server to load from file, restart the DNS server and once again it crashes every 2 minutes..
    Please help,  this is killing me..
    thanks in advance..

  • Screen Sharing slows down dramatically after RDP upgrade from 2 to 3

    For some reason once we upgraded from RDP 2 to RDP 3 our Screen Sharing has gotten increasingly slow. We are using it in a school environment where the teacher will share their screen with the students, and as we add more students to the share the sharing slows down to become unusable. This problem is intermittent (otherwise I would go though the logs and run a control test), and has only started upon upgrading to RDP 3. Anyone else experience this behavior? I believe we are all running 10.5.x on the OS side.

    I also know someone that is having this issue; it was fine with the previous ARD version they were using in the computer lab, but after upgrading screen sharing have slowed down. It's not really that of an issue when its just one computer, but when they put all 30 computers the FPS drops down.
    Keep in mind that they were not having the issues before upgrading. I've also been told that, currently, they got a 5 MB connection. I ran a network test and everything seemed fine (or more like I didn't know what was going to tell me that something was wrong, but all the numbers were very low).

  • Excel layout changed after EHP5 upgrade from EHP4.

    Hi All,
    We have just finished the EHP5 upgrade from EHP4 for ECC 6.0 for our production system. BUT we noticed that The standard layout, (also known as Dynamic List Display) has been chagned in EHP5 compare to EHP4.
    This is affected us as we have lot of macros enable for the excel files.
    Request you all to help. Is there any sapnote, anyway we can resolved this issue.
    Thanks

    Hi Markus,
    Thanks for reply.
    I not sure how i can attached file over here? Is there anyway to attached files in the forum?. I have the before and after image of excel file.
    But the position of the data which is downloaed in the excel sheet has been changed after upgrade. For example ,Before upgrade the column named "Description" in the production plan report was in the second column i.e. B where as after upgrade the "Description" column in the production plan report is in the first column i.e. A.
    I mean the postion of the data changed in after upgrade. Therefore macro which are enable are not working anymore.
    New Format Example
    Production plan          
    Description                        Material                               Sales doc.
    IRB 2600 M2004                 3HAC020536-018              104861
    IRB 2600 M2004                 3HAC020536-018              2BT0615486
    OLD Format
    Production plan                    
                                          Description                    Material                               Sales doc.
                                          IRB 2600 M2004            3HAC020536-018               104861
                                          IRB 2600 M2004            3HAC020536-018               2BT0615486
    Hope this above will help to make it clear.
    After checking this message ... the output example given above seems to be not showing the way i itend to... But in above example in the old format the Description column was at column B instead of column A after upgrade.
    Thanks
    Edited by: deepak.shinde on Oct 11, 2011 8:34 AM
    Edited by: deepak.shinde on Oct 11, 2011 8:36 AM

  • Getting WSDL in reverse order after server upgrade from WAS 5.1 to 6.1

    Hi All.I need your help.I am working in RAD 7.0 .After the IBM websphere upgrade from 5.1 to 6.1 i am getting the wsdl generated exactly in reverse order(in 6.1) as compared to that in version 5.1.Can you tell me wat can be the issue .We are using glue-pro jar for generating the WSDL.is there any setting in RAD or WAS which need to be changed so that i can get WSDL in old format.
    Any suggestion or opinion is welcomed.

    Does it matter? And if so, why does it matter?
    From my previous experience with Glue you don't want to have it generate WSDLs anyway. It's not very good at it at all, generates WSDL that are full of errors.
    Better to write your own WSDL and tell Glue to use those.

  • ITunes Not Working After Windows Upgrade from Vista to 7

    I recently upgraded a laptop from Vista to 7.  iTunes 7.x was installed before the upgrade.  As soon as Windows 7 was insatlled I upgraded to the lates version of iTunes(10.x).  After the upgrade I had some issue where I was getting an error about artwork and iTunes would not open.  I renamed the artwork folder to old and then I was able to get into iTunes.  The next problem that I am running in to is that any time I click on a task such as find music iTunes stops responding and crashes.  I've tried new config files, completely uninstalling and reinstalling, clean booting, etc. with no luck.  Anyone have any suggestions?

    I've been working on this issue for 2 days with no luck.  Still looking for a solution if anyone has one.  Thanks!

  • Registry keys after SharePoint Upgrade from 2007 to 2010

    Hi,
    I'm working on a SharePoint Server 2010 Farm, where it has been upgraded from 2007, actually I don't have enough information about the history of this upgrade, but
    it seems it was an in-place upgrade, and the 12 Hive folder is still there.
    Looking at the Windows Registry, I found that Registry Entries for 2007 version is still there: ([HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared
    Tools\Web Server Extensions\12.0] ), one of those entries is named "SharePoint" and its value is "Installed".
    Is this a normal situation?
    We are trying to install an antivirus for SharePoint but the installation is keep failing the vendor is claiming that this is the issue (2007 registry entries), and
    that the upgrade have not been done successfully.
    The SharePoint 2010 farm is running perfectly, and I have ran a "LocalUpgradeStatus" command on one of the servers, the output is with no issues.
    I have checked below pages and everything is normal:
    Check product and patch installation status
    Review database status
    Check upgrade status
    Any thoughts? is it normal to have such old registry entries in place? shall I just clean them?
    What do you recommend in such situation?
    Hamza AlSughier

    Hi Hamza,
    It should be in-place upgrade for your environment, here is a workaround per the following similar post, please confirm with antivirus vendor if the 12 registry files and 12 hive cause this issue, if yes, then backup the 12 registry files and 12 hive, then
    after you installed the antivirus successfully you can add the keys back.
    Note, Please fully test in your testing environment firstly before touching the production, and production also needs to be fully backed up.
    https://social.technet.microsoft.com/Forums/en-US/0a3f0b25-49be-488c-ac11-0bfab0f3cbe1/do-you-recommend-remove-sharepoint-2007-after-upgrade-in-place-to-sharepoint-2010?forum=sharepointadminprevious
    Thanks
    Daniel Yang
    TechNet Community Support

Maybe you are looking for