After Mavericks, at start up, initial screen brightness too high and starting sound too loud, different than I left on previous shutdown. Didn't happen before the update.

I've tried sudo nvram SystemAudioVolume=%80 for the sound, but it works just once... returns next startup's.

The first thing to do is use smartctl to test the drive. Start with the short test ( smartctl -t short /dev/sdX ), and if it passes run the long test ( ... -t long ... ).

Similar Messages

I have screen shots of the messages and what happens when I try to play games on Facebook since I updated Firefox. Issues I didn't have before the update. Where do I send them? How do I correct this?

The screen shots include the web address for both shots. One is for script error messages that keep interrupting EVERY game. Then after I stop the scrip, Adobe Flash crashes, and I have no control. I have to use the Windows Task Manager to gain access to my home page to get out.
This didn't happen until I updated the Firefox this last time. I've tried everything and nothing works to get rid of the problem.
I've been to your questions, etc and nothing I've found helps.
I use Windows XP
Four sites are the worst; I only play these 4 games on Facebook.
URL's of these are:
http://apps.facebook.com/wildwesttown/?ref=bookmarks&count=0&fb_source=bookmarks_apps&fb_bmpos=4_0
http://apps.facebook.com/aviator-game/?fb_source=canvas_bkmk_top
http://apps.facebook.com/gnometown/?fb_source=canvas_bkmk_top
http://apps.facebook.com/journeyofmoses/?fb_source=canvas_bkmk_top&count=1
(I got a script error message just getting the URL on this last one.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

After the update, Firefox is a mess on my computer: Won't print, often seizes on opening a window or trying to print. None of which happened before the update. This is the most dysfunctional update yet, on my computer anyway.

Nothing to add. I'm waiting for a new update to address the problems of this one--which has happened periodically in the past. The "educated guesses" below are incomprehensible.

Well Bababooey if you're comparing yourself to a Apple Genius Bar then you should already know my answer, your snarky remark get a snarky reply. Why would I go to a salesperson to fix my computer problem when I can go directly go to the source itself. I used to sell Apple computers over 8 years ago and was apple certified before the Genius bar existed. If I am to go about fixing an issue I can't fix on my own I will go to the source itself meaning Apple's programmers and developers - being UI UX Developer myself I know they should have QA'd all platforms and troubleshooted any arising issues.
This was also the first time in the 20 years I've been using a Mac that I even attempted to go on this forum which i thought would put me in connection with a certified Apple representative. This turned out to be a complete waste of time just being a public forum with no Apple employee involved. I was hoping to find a quick fix but in turn I was only frustrated with stupid responses such as yours that were in no way an answer to my original question.
BTW I fixed the issue on my own and without your help or Apples help. I'm glad if all forums point here regarding this issue because I now have the answer. The answer I was looking for from someone earlier was as simple as this {Download Maverick and reinstall the platform - it will take an hour to do but afterward 10.9.2 was installed and my computer is now able to shutdown and restart without having to do a hard boot.} No more software update bar at top and no problems with my drive which I told both you and Grant - I know my computer better than you and I've probably been using them longer than you.
So again Babowa you were so wrong...... and I am right.
Again anyone having the same problem, I suggest reinstalling Maverick and you'll be suprised 10.9.2 will work fine.

After updating to v. 6.X.X, vertical lines appear around the cursor when typing in webpages such as Gmail and Facebook that persist, obscuring text and other pixels in the webpage. Didn't happen before this update.

I noticed after updating to Firefox version 6.0.1 that vertical lines the same size and shape as the text cursor remain behind on the screen as the cursor moves (either while typing or by using arrow keys). This is most obvious and annoying in text-heavy applications such as when typing in Gmail, Facebook, and work webmail, for instance. (Interestingly, it's not happening now as I type this.)
This is very annoying because these lines obscure parts or even entire letters in words that have been typed. I thought that it might have been a Firefox customized 'skin' I added at the same time as updating, but I reverted to the default view and the problem remains.

I noticed after updating to Firefox version 6.0.1 that vertical lines the same size and shape as the text cursor remain behind on the screen as the cursor moves (either while typing or by using arrow keys). This is most obvious and annoying in text-heavy applications such as when typing in Gmail, Facebook, and work webmail, for instance. (Interestingly, it's not happening now as I type this.)
This is very annoying because these lines obscure parts or even entire letters in words that have been typed. I thought that it might have been a Firefox customized 'skin' I added at the same time as updating, but I reverted to the default view and the problem remains.

After downloading the update ios7 my moms phone has been locked with a four digit security code that she didn't have before the update. So she is locked out of her phone. How do I get rid of the four digit code

HOw do I unlock the phone if there was never a lock code on there before the update?

Yep. Same here. There's a NEW feature in iOS7 for Find my iPhone. It requires a passcode. My wife never had a passcode and doesn't have her computer to restore the backup.
Spent an hour on the phone with customer service last night trying to restore the phone to factory settings but it didn't allow us access.
Right now we have a 9-month old brick sitting on the table.
Who in their right mind decided to release this feature that requires a passcode without checking first to see if the user has a passcode?
I was not really polite to the support staff last night on the call but the person was very professional. Kudos to how he handled my call but this is just stupid. So Microsoft-like, so un-Apple-like.
This feature with this iOS rollout is a big failure and my wife, who didn't want an iPhone until she got (and loved it) but is now out looking for an Android device. Apple has lost a customer that they had only recently won over.
#epicfail

I just did an update to 6.0 on Lion. Now when I re-open Safari after closing it by clicking the red button it re-opens to my home page, not all my previous tabs.. prior to the update it would re-open with all my previous tabs, which is what I want.

I just did an update to Lion 10.7.4 with Safari 6.0. Now when I re-open Safari after closing it by clicking the red button, it re-opens to just my home page, not to all my previous tabs as it did before the update. I prefer having my old tabs re-open. How can I fix this?

I've had what I think is the same problem since the most recent software update. I have Lion 10.7.4 and have updated to Safari 6.0. The most noticeable difference is that where previously I had two boxes at the top of the Safari window (one to enter URL addresses, one for Google searches), there is now only one box for both functions. I don't like that as well, but I can live with it. However, since the most recent software update my "back button" only works about 5% of the time. Most of the time it is grayed out. So I usually can't get back to previous pages using the back button. Also, when I've clicked a link that opens a new window (for instance, going through the return process at Amazon, I clicked UPS locator and it opened a new window), where in the past I would have just clicked the red button after I had the information, the UPS locator window would have closed, and I would have been back at Amazon - now if I close the UPS locator window, all Safari windows close. The Safari application doesn't close, but the Amazon window closes, I'm back to an empty screen, and I have to open a new Safari window and reenter everything. I'm using a work-around of clicking on History and selecting the description of the window I want to get back too, but that only works part of the time. In the Amazon example, that's what I did once I had the UPS info, but even though I clicked the correct window description, it took me back to the beginning of the return process & I had to reenter all the info. Of course, that info was easy to reenter, but if I'm in the middle of a complicated process, it's a big problem. I've filed a bug report; I surely hope the Apple engineers are able to fix this. I'm used to using the back button function a lot!

About a month ago, Mavericks had an automatic update. I have a Windows 7 partition bootcamped on my macbook pro. Before the update, everything was fine. Now, when I attempt to start Windows partition, as soon as I touch the keyboard or mouse the scre

about a month ago, Mavericks had an automatic update. I have a Windows 7 partition bootcamped on my macbook pro. Before the update, everything was fine. Now, when I attempt to start Windows partition, as soon as I touch the keyboard or mouse the screen goes black and I can't go any further. I have tried to re-load the bootcamp drivers and try again. It does the same thing. Any help would be great.

i sue windows 7 and my orignal macintosh formated and get online same window

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.Not working in USA timezone.

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works fine in our side (Timezone,kolkata ,india even for Timezone,slvaniya,USA) but our USA client is telling that on changing the date it not starts from start-up sequence.Can anyone plz suggest the reason for it.

This is the code which we have used.
//////////Return if it is first time for the day or not//////////////
+ (BOOL)isFirstTimeToday {
BOOL result = YES;
NSDate *now = [[NSDate alloc] init]; /// represents the current time
NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: now];
NSDate *today = [gregorian dateFromComponents:components];
[now release];
[gregorian release];
NSDate *savedDate = [[NSUserDefaults standardUserDefaults] objectForKey:LAST_TIME_VISITED];
if (savedDate) {
if ([today earlierDate:savedDate] == today) {
result = NO;
return result;
////////Stores the date/////////////
+ (void)userDidVisitReenforceScreenToday {
[[NSUserDefaults standardUserDefaults] setObject:[NSDate todayAtMidnight] forKey:LAST_TIME_VISITED];
////////////What [NSDate todayAtMidnight] stores/////////////////////
+ (NSDate *)daysFromNowAtMidnight:(NSInteger)nOfDays {
NSDate *date = [NSDate dateWithTimeIntervalSinceNow: (86400*nOfDays)];
NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: date];
NSDate *dateAtMidnight = [gregorian dateFromComponents:components];
[gregorian release];
NSLog(@"dateAtMidnight : %@",dateAtMidnight);
return dateAtMidnight;
+ (NSDate *)todayAtMidnight {
return [self daysFromNowAtMidnight:0];
Please Suggest..

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone

Try posting in the developer forums to see if you can get some assistance,you'll have to be a registered developer for access though.
developer.apple.com

I bought iphone 5s 2 days ago and suddenly it turn off and start again till the white screen with apple logo and start again

i bought iphone 5s 2 days ago and suddenly it turn off and start again till the white screen with apple logo and start again
please answer me as soon as possible

Hello Ahmedabokamar,
Thanks for the question! I'd recommend taking a look at the following article for troubleshooting steps that can help get your iPhone working again.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen

TS3274 After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

Hi Midnightbrat,
Welcome to the Support Communities!
The troubleshooting steps for the camera on the iPad are similar to the iPhone: I've highlighted the pertinent steps below:
Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
Try turning the iPad off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try switching between the front and the back cameras to verify if the issue persists on both.
I hope this information helps ....
Have a great day!
- Judy

After update 6.1.1 I can't send pictures on iMessage and im on wifi. But if I send the picture as a text message it going through. I sent out several pictures before the update now I can't.

After update 6.1.1 I can't send pictures on iMessage and im on wifi. But if I send the picture as a text message it going through. I sent out several pictures before the update now I can't.

HI,
So you have updated past this point ?
http://support.apple.com/kb/TS5419
There also seems to be no issues listed here.
http://www.apple.com/support/systemstatus/
8:44 pm Friday; April 25, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

When I try to migrate from imac to macbook pro my user account says this user needs attention before migrating. My e-mail does not migrate in the process. this never happened before i updated to Maverick

When I try to migrate from imac to macbook pro my user account says "this user needs attention before migrating". My e-mail does not migrate in the process. This never happened before I updated to Maverick. I have repaired user permissions but this not make any difference

Just a Follow-up - the migration went fine. The migration did not import Little Snitch, Flip4Mac and DivX, stating they were incompatible. It also reported that Intego Back up Assistant has improper security setting (which I have not yet investigated).
I am encountering small problems. Safari would not open embedded pdf documents and instead showed a black screen. This was fixed with instructions found at http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html and it now works fine.
Importing 17 years of old mail from Eudora to Apple Mail was time consuming. mostly because of the pre-migration preening i did, but using Eudora file cleaner before the migrtaion helped a lot.
I amy find some more glitches, but so far everything seems to be working.

I updated my iPad 2 OS to iOS 6.0..after that I am unable to download or update anything from the App Store. The MSG I get is "id not valid for US store. Go to Indian store for purchase"..never faced this problem earlier before the update to OS 6..help!!

I updated my iPad 2 OS to iOS 6.0..after that I am unable to download or update anything from the App Store. The MSG I get is "id not valid for US store. Go to Indian store for purchase"..never faced this problem earlier before the update to OS 6..help!!

Apple's response to my email:
"I understand that you can't update your apps using your iPad.
Apple is currently working toward a resolution for the issue you have reported. You will receive an email after the matter has been investigated and further information is available.
Thank you for your patience. Apple wants your iTunes experience to be as enjoyable as possible. Have a great day!"

When scrolling vertically there is an horizontal line which causes distorsion of the screen. I do not have noticed such concern on my iMac or on my macbook. What happen with the macpro ?

When scrolling vertically there is an horizontal line which causes distorsion of the screen. I do not have noticed such concern on my iMac or on my macbook. What happen with the macpro ?

MacPro bought in 2010
MacBook Pro
MacBookPro7,1
Intel Core 2 Duo
2,4 GHz
Nombre de processeurs :          1
Nombre total de cœurs :          2
Cache de niveau 2 :          3 Mo
Mémoire :          4 Go
Vitesse du bus :          1,07 GHz
Version de la ROM de démarrage :          MBP71.0039.B0B
Version SMC (système) :          1.62f6
Numéro de série (système) :          W804853GATP
UUID du matériel :          716CB476-983B-5C43-B363-988FB608C01C
Capteur de mouvement brusque
État :          Activé
System:
Mac OS X 10.6.7 (10J869)
Darwin 10.7.0
Video DIsplay Card
NVIDIA GeForce 320M :
Jeu de composants :          NVIDIA GeForce 320M
Type :          Processeur graphique (GPU)
Bus :          PCI
VRAM (totale) :          256 Mo
Fournisseur :          NVIDIA (0x10de)
Identifiant du périphérique :          0x08a0
Identifiant de révision :          0x00a2
Révision de la ROM :          3533
Moniteurs :
LCD couleur :
Résolution :          1280 x 800
Profondeur de pixels :          Couleurs 32 bits (ARGB8888)
Miroir :          Activé
État du miroir :          Miroir matériel
Connecté :          Oui
Intégré :          Oui
Is that what you asked ? Do you need other data ?
Note that I have also strong distorison when running slides show with iphoto.
Thanks

After Mavericks, at start up, initial screen brightness too high and starting sound too loud, different than I left on previous shutdown. Didn't happen before the update.

Similar Messages

Maybe you are looking for