After migrating a windows 7 machine using ADMT Group policy shows the the computer is from the new domain but user is from old domain

We have migrated machines using ADMT tool but we have found some window 7 machines Group policy issues. We see that the computer GP is getting from the new domain but the users profile still has the old domain GP information. Any help on
removing the old GP objects and forcing the new domain User policy would be great. We have tried the basic troubleshooting gpupdate /force reboot etc.
Thanks

Hi,
Sorry for the delayed response.
First, please verify whether these domain users you mentioned belong to old domain or new domain.
If they belong to old domain the GP is right with no problem. If they belong to new, try following suggestions.
Please test these steps in one of the problematic computer. If it worked, then go on for others.
To avoid unexpected problems, please backup your register keys before following steps:
Open regedit.exe, and delete following keys:
HKLM\Software\Policies\Microsoft Key (looks like a folder).
HKCU\Software\Policies\Microsoft Key.
HKCU\Software\Microsoft\Windows\CurrentVersion\Group Policy Objects Key.
HKCU\Software\Microsoft\Windows\CurrentVersion\Policies key
Exit the registry and restart.
Note: HKLM = HKEY_LOCAL_MACHINE & HKCU = HKEY_CURRENT_USER
If you have any feedback on our support, please click
here
Keep post.
Kate Li
TechNet Community Support

Similar Messages

Users cannot access removable devices after you enable and then disable a Group Policy setting in Windows 7 64 Bit

Users cannot access removable devices after you enable and then disable a Group Policy setting on Windows 7 64 bit machines.
on the 32 bit machines I was able to apply this hotfix
http://support2.microsoft.com/kb/2738898
But it will not install on 64 bit machines.
Is there a hotfix for 64 bit? If not, what is the work around?
Thanks!
Robert

Select "Show hotfixes for all platforms and languages", then download x64 hotfix:
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

I'm running windows XP using boot camp. What key do I push on the keyboard to bring up my desktop?

I'm running windows XP using boot camp. What key do I push on the keyboard to bring up/go to my desktop?

Have a look here http://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts
Stefan

How to uninstall Cisco VPN client 5.0.07.0440, using SCCM \group policy?

How to uninstall Cisco VPN client 5.0.07.0440, using SCCM \group policy or may be a login script?
msiexec /u "vpnclient_setup.msi" /q /norestart , but it did not worked.
msiexec /x "vpnclient_setup.msi" /q /norestart , but it did not worked.
I hav apprx 500+ win 8 clients.
Thanks in Advance

Looks like I have to follow this exactly:
http://myitforum.com/cs2/blogs/smchugh/archive/2006/11/15/automating-removing-the-cisco-vpn-client.aspx
msiexec.exe /uninstall {Cisco VPN 5.x guid} /qn
MsiExec.exe/X{5FDC06BF-3D3D-4367-8FFB-4FAFCB61972D} /q /norestart

Group policy error: Failed to open group policy object on this computer.

Hi all,
I received this message when i tried to look at the local group policy setting on one of my machines (Windows XP SP3), which is joined in my domain.
"Failed to open group policy object on this computer. You may not have appropriate rights.
Details:
Unspecified error."
note that I am local admin.
It's all started when I was troublshooting WSUS connectivity and i looked at the WinsdowsUpdate.log, the WSUS server was <Null> & WSUS status server <Null>, I tried to force the domain GP by using GPupdate /force, it went fine and asked to
log off, but nothing changed in the WindowsUpdate.log still <Null>. Then i tried to look at the local policy setting.
I searched the internet nothing related to my case.
Thanks in advance for advising.
Mohammed Adel

I guess reinstall windows is the solution, I also found one log "event id 1096", related to "registry.pol" it was corrupted.
Regards,
Mohammed Adel

HT1386 I recently updated and restored my Iphone on a Mac. My music was erased, therefore, I am trying to sync all of the music from my computer into the iPhone, but it says that I need to use the original computer/itunes in order to sync, but it is the s

I recently updated and restored my Iphone on a Mac. My music was erased, therefore, I am trying to sync all of the music from my computer into the iPhone, but it says that I need to use the original computer/itunes in order to sync, but it is the same computer and iTunes account. The error reads: The iPhone, "Name" is synced with another iTunes library. Do you want to erase this iPhone and a sync with this iTunes library? If I click "Erase and Sync," will it delete my contacts, apps, etc?

The following may help: iOS: Device not recognized in iTunes for Windows

How do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer

how do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer. Baiscally the problem is that one comuter and one account has always been sued for eey persons itunes. Now if we want to be able to backup and use itunes on our own computers fro our iphones and such, how will all he data that is on our phones not be deleted once its plugged into a new computer? Also, is theere a way to get all the stuff on thw current itunes onto each computer, via differtn account name?

option discovered in preferences. Really this and any feature that moves deletes or edits a users data should as far as possible be OFF BY DEFAULT. It shouldn't by default and without the users specific say do this dangerous and unnecessary thing without even letting the user know what it's doing!!! And then cause me a few hours (as i'm new to mac) searching for the option so as to switch it off. If i hadn't noticed the status cage declaring that it was copying files then i might never have twigged that this insane thing was occurring. And if i hadn't of noticed i would have been left maintaining the contents of the folder i copied the files to, the folder which as far as i was informed and so believed was also the location of the music files i was playing. How does Apple justify this 'genius' piece of software non-design? Surely it will hurt no one if this was off by default for new users - overall at least i dare say it would cause a lot less distress in the future for the unsuspecting public at large. Thanks for the support.

TS3694 after updating i lost alll settings in phone. nw showing recovery mode, then i try to recover it but after some process its showing error 1015 what to do?

after updating i lost alll settings in phone. nw showing recovery mode, then i try to recover it but after some process its showing error 1015 what to do?

What OS prior to update? Jailbroken?

After Migration Assistant, Time Machine refuses to use old backups

I've got to say I'm pretty disappointed with Time Machine.
I just dropped $2,000 on my second-ever Mac, a 15" MBP (Core i7 2GHz, 4GB RAM, 500GB 5200rpm hard drive, the stock low-end 15" config). From what I'd heard about Migration Assistant, I believed it would easily move my stuff over to my new Mac. For the most part it did, but a few things didn't transfer. Other posts on the topic detail them accurately - Desktop icon layouts, some settings, Growl, etc.
I told Migration Assistant to use my Time Machine backups, which have been happening without incident for a long time. My oldest backup is December 2010.
Now that my new MBP is about 99% set up like my old MBP, I am having a problem with Time Machine.
I get the error "Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 355.61 GB but only 176.44 GB are available."
Looking at the Time Machine drive in Finder, I found that Time Machine is trying to create a new folder for backups and do a full backup. Where there was once one folder, "[My Name]'s MacBook Pro," there is now an additional folder, "[My Name]'s MacBook Pro 2." Time Machine is trying to back up into that second directory.
Now, I get it that this is a different computer. But really, if I use Migration Assistant to restore my Time Machine backup, I think it would be safe for OSX to assume that I want to continue using those backups. What is especially disappointing for me is, there were things that Migration Assistant did not restore properly. I probably haven't found them all. That makes it CRUCIAL that I have my Time Machine backups, but it seems that Apple thinks it's perfectly normal for me to want to FORMAT my Time Machine drive after Migration Assistant did a half-*** job of migrating my data. I need those backups now more than ever.
I do also have an online backup, but I still don't feel very comfortable destroying six months of local backups just to make Time Machine work again. Both MBPs were running the same (latest) version of Snow Leopard, so it stands to reason all that needs to happen is a very small incremental backup.
I have been Googling for hours. All I've found is a procedure for 10.5 that doesn't work in 10.6 where I get down into the Terminal and change a MAC address in a file on the Time Machine volume. But that's it. In fact it seems like there's no answer.
Come on Apple, you do everything else better than the competition. Why do I have to nuke six months of backups or buy a new 2TB external drive to make Time Machine work again? I assure you I want to continue making incremental backups against my old Time Machine backups, and promise to hold you not responsible should I screw something up by grabbing an old system file or something from February.
Would appreciate any help anyone could offer.

Did you use Setup Assistant when your new Mac first started up, or skip that, create a user account, then use the Migration Assistant app in your Applications/Utilties folder?
If you used Setup Assistant, when you started your first backup you should have gotten the message in #B5 of Time Machine - Troubleshooting. It sounds like you didn't (or chose Start New Backup). And no, the Leopard procedure doesn't work on Snow Leopard. That's what #B5 is for.
Usually, if you use Setup Assistant, Time Machine will still say it's going to do a full backup, and make room for it, but actually do an incremental backup (very, very slowly).
Either way, it usually deletes a lot of old backups. We're hoping that will be fixed in Lion.
Once it's decide to make a new backup, there's no known way to prevent it.

Printing Issue after Migrating to Windows 7

I just migrated to Windows 7 and have received the below issue in only SAP
I have granted all users access in the securities tab.
(12:06:17 PM) Number of processors: 4
(12:06:17 PM) Icon DLL loaded.
(12:06:17 PM)
(12:06:17 PM) Network Communication via SAP-NiLib
(12:06:17 PM) Hostname:
(12:06:17 PM) IP Address:
(12:06:17 PM)
(12:06:17 PM) SAPLPD Version 6.29 for Windows/NT (OPT) is listening
(12:06:17 PM) OS-Info: version = 6.1, build = 0/7601, text = Service Pack 1
(12:06:17 PM) Copyright © 1992-2001 SAP AG
(12:06:17 PM)
(12:06:28 PM)
(12:06:28 PM) Receive job for printer __DEFAULT (Berkeley LPD protocol / RFC1179)
(12:06:28 PM) send_status called
(12:06:28 PM) send_status called
(12:06:29 PM) send_status called
(12:06:30 PM) send_status called
(12:06:31 PM) send_status called
(12:06:31 PM) Job 00PSLhcf.PN1 for user ######### queued.
(12:06:31 PM) Start printing job 00PSLhcf.PN1 on printer HP PHOTOSMART C5200 SERIES
(12:06:31 PM) Error: Error -1 from NEWFRAME. Disk full?
(12:06:31 PM) Error: put_block failed at new_page()
(12:06:31 PM) Error: BG: saplpd_close_dc failed, msg = 808 SAPLPD:Windows Problem, siehe SAPLPD Protokoll
When I close this window, the paper will spool up in the printer like it is about to print, but never does.
Thanks in advance!

Hello Alyssa,
You can use the link below:
[821519 |http://service.sap.com/sap/support/notes/821519 ]
and
[128105 |http://service.sap.com/sap/support/notes/128105]
BR,
Jude
Edited by: Jude Bradley on Dec 7, 2011 3:49 PM
Edited by: Jude Bradley on Dec 7, 2011 3:51 PM
Edited by: Jude Bradley on Dec 7, 2011 3:52 PM
Edited by: Jude Bradley on Dec 7, 2011 3:52 PM

Reformat external hard drive for Windows machine using disk utility

I have a Maxtor 160GB dual-interface external HD. I used it for my Mac OS X. I erased and reformated the hard drive on my Mac to MS-DOS using Disk Utility for use on my fathers Windows XP. I hooked the hard drive up to the Windows machine and the hard drive was visible in both Windows Explorer and on the task bar. I right clicked on the hard drive and selected Format. The formatting takes a while but at the end an error appears indicating the hard drive was not formattable. How can I get a MS-DOS formatted hard drive (from a Mac) to be used on a Windows XP machine with a NTFS format?

Turns out it is possible:
Maxtor Support..
I would use your Disk Management utility within Windows to repartition and reformat the drive. To access Disk Management, right click on My Computer, go to Manage, and then choose Disk Management. Within Disk Management the drive should show in your list of disks (Disk 0,1,2 etc etc). I would delete any partitions that are on the drive. To delete a partition, just right-click on the partition and choose delete. Make sure you’re deleting the correct drive. Once the entire drive says unallocated then the drive should be ready to partition and format. Just right click within the Unallocated Space on the drive and choose the New Partition or New Volume option to set up the drive.
I followed the instructions and everything worked.

My Microphone is not working after upgrading to Windows 7 using Laptop Satellite L505D-S5965

Please I need your help. My laptop Satellite L505D-S5965 had vista and I got the upgrade for windows 7. However after the upgrade I noticed that the microphone is not working while the speaker are working fine. I have went to the sound right click and choosed recording device and found tha the realtalk is my driver and everything is fine there. when I change to stereo mix I got very bad noise.
can someone help please. please note that the microphone was working in vista operating system. Does Windows 7 has a bug in this regrad.
I also have another question my understanding is the model Satellite L505D-S5965 has no internal microphone is this is the case? I can plug in external mic into the jack provided for this but there is no built in microphone am I correct please advise?
thank you for all you great help

Hi
when you upgrade the operating system to windows 7 it just install the generic driver
copy and paste the link
http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_audio_realtek_TC50036500C.exe
let me know if it didnt work

Unable to connect to Windows machine using RDC

I am trying to connect to a Windows server using Microsoft RDC on 10.4.11. My settings work fine for my 2013 iMac and 2009 Macbook Pro, with both RDC and Cord. I get the following messages in console (wondering if there is anything I can do to make this work in 10.4):
ERROR: Failed to extract public key from certificate
ERROR: recv: Connection reset by peer
ERROR: Failed to extract public key from certificate
ERROR: recv: Connection reset by peer
ERROR: send: Invalid argument
ERROR: Failed to extract public key from certificate
ERROR: recv: Connection reset by peer
2013-08-22 12:43:16.672 SyndicationAgent[22633] WARNING: Feed connection for CNET News RSSFeed failed: NSError "lost network connection" Domain=NSURLErrorDomain Code=-1005 UserInfo={
   NSErrorFailingURLKey = http://news.com.com/2547-1_3-0-5.xml;
   NSErrorFailingURLStringKey = "http://news.com.com/2547-1_3-0-5.xml";
   NSLocalizedDescription = "lost network connection";
Thanks for the help.

Hmmm, why news.com.com?
I doubt it'll help with the Certificate, but might try CoVNC...
http://sourceforge.net/projects/cotvnc/

Changing IP address of local windows machine using NETSH in JAVA- HELP

Hi ALL,
I have written one java program to change the IP address of local
machine using netsh command tool and runtime.exec method in java.
String[] command1 = { "netsh", "interface", "ip", "set", "address",
"name=", "Local Area Connection" ,"source=static", "addr=",str1,
"mask=", str2};
Process pp = run.exec(command1);
The program is working fine.
Here I need to set interface name namely "Local Area Connection" in command.
Actually I should not hard code this and I should get this from
getting active network interface name. I have written program for
that, but the name I am getting is like "Intel(R) PRO/1000 PL Network
Connection - Net Firewall Miniport Interface". I am not getting name
as "Local Area Connection".
So please help me to resolve this issue.

See
http://forum.java.sun.com/thread.jspa?threadID=5239534&tstart=0
@OP Stop cross-posting just because you don't like the answers you are getting. You've been going on and on about this for a week now (if not longer) opening threads all over the place, and it is starting to get a little old.
Edit: And, if you want to see the aliases that netsh uses (and that were probably assigned using something at least similar to netsh), why don't you use netsh.
netsh show alias
As I said, this question is no longer a Java question, not even close. It is now an OS question.

Windows 7 DNS and Group Policy Issues

Hi,
We have several suites of Windows 7 domain connected PC's.
In one of the suites I have been called into look at 3 different PC's where the users have not got mapped drives, desktop backgrounds, internet connectivity - because their group policies have not applied.
When I look at the error logs I find DNS 1014 errors, and Group Policy 1054 errors.
I have looked at the logs on the switches, and there is nothing on them - Could a pupil pulling the network cable out cause these errors?... Possibly they could have put it back in before I got back in the room.
The user logs off of the PC and back on again and are fine, as are the users that logon after them.
We have 2 DC's/DNS servers, which I would have thought would be able to cope with the load here.
Please let me know what you think the likely cause could be.

Hello John555444,
What is your current situation?
Is this issue resolved?
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

After migrating a windows 7 machine using ADMT Group policy shows the the computer is from the new domain but user is from old domain

Similar Messages

Maybe you are looking for