After migrating to a new mac; iphoto library cannot save

Hi,
I'm faced with the problem that since the migration to a new mac; iphoto 11 cannot save any changes to the library. I can import, I can add an album, but if I quit Iphoto and start again every change is gone.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Similar Messages

  • Getting Slow after Migration to a new Mac

    Every time, I've bought a new Mac and using Migration Assistant to migrate my data to new Mac. The new Mac is getting slower, not look like a hardware upgrade. For example, my Macbook Pro i5 needs more than 10 seconds to start MS Word while my MBA needs less than 2 seconds.
    Will there so many scrap or unused data migrated from my old mac? And my "migration data" has been accumulated for several times since 5~6 years ago. I've used this "migration data" for every new Mac arrives. So, This is not the first time I've expereinced, this was happens several times when I bought a new Mac.
    Please note that Spotlight Indexing is complete.
    Thanks.
    Regards,

    Thanks for your suggestions. I've updated the software already (noticing that it was system, i-movie and garage band which were being updated) but that didn't help. Previously that did help for i-photo though.
    Anyway, I tried the sudo thing, I got the following messages but still no i-movie :
    updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/Resources/MetadataLib.dy lib for /usr/lib/libgcc_s.1.dylib
    updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera for /usr/lib/libgcc_s.1.dylib
    updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/Resources/MetadataLib.dy lib for /usr/lib/libgcc_s.1.dylib
    updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera for /usr/lib/libgcc_s.1.dylib
    updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera for /usr/lib/libgcc_s.1.dylib
    updatedyld_sharedcache: warning mismatched install path in /System/Library/CoreServices/RawCamera.bundle/Contents/Resources/MetadataLib.dy lib for /usr/lib/libgcc_s.1.dylib
    Any other ideas?

  • Why are some clips missing after migrating to my new Mac?

    My old Macbook Pro died so I got a new one and have migrated my data to the new one from a Time Machine backup. However, after doing this iMovie is telling me a lot of clips are missing. Many of them are still in tact, but in a lot of cases I see a message like: Missing File "clip-2012-09-13 07;52;06 (id)" is missing. Try reimporting the original source media. I'm using iMovie 10.0.6 and Yosemite (on both the old and new Mac).
    Can anybody tell me how I can fix this?
    Thanks

    If it matters, I have a Canon camcorder and imported the clips using a firewire cable. The external drive is connected via a second firewire cord to the other firewire port.

  • Time Machine: Cannot access old backups after migrating to a new mac

    Hello,
    I have bought a new Mac (With Snow Leopard installed on it). I have used it for about half an hour to have fun with it.
    Then, I have decided to use Time Machine & Migration Assistant to restore all my files from my old Mac (Leopard). The restoration was successful and I was very happy to see that all my files and settings were there.
    However, when I try to access my old backups (the ones I have done prior to buying the new Mac), Time Machine says I do not have the permissions to access it.
    Is there an way to fix this? I would like to be able to access these old files.

    I am having a similar problem and do not understand the solution. I have a new Macbook and transferred my data from my Powerbook G4. However, I cannot access anything! There is a no entry sign on the folders and if I click them I get this message: 'The folder “Pictures” can’t be opened because you don’t have permission to see its contents.'
    Help - but please, in simple language
    Thanks

  • Aperture always ask for license key after migration to a new mac

    Hello,
    I used the migration tools to transfer data and applications from my old mac to the new one.
    When I lauch Aperture it always ask me to write the license key. I do it and can start to use Aperture.
    The problem is that this settings is not saved and I have to put again the serial key everytime I launch Aperture.
    I use the last version of Aperture 3.
    Thanks in advance.

    You may have a corrupted "ProAppSystemID" file or Aperture cannot write to the System Library.
    To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppSystemID" in your System Library.
    Quit Aperture.
    Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
    Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
    Reenter your serial number, hopefully for the last time.
    Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
    Use the Finder's "Go" menu
         Go > Got to folder    and  enter /tmp into the textfield. If you see the file there, move it to its proper location.
    In this case you may want to repair the permissions on your system drive; you can do this using the "First Aid" tools in "Disk Utility" (located in Applications > Utilities)
    Regards
    Léonie

  • Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

    Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

    Hi, hopefully you guys can help me out, I just
    purchased a G5 iMac to replace my aging dell desktop,
    and now i'm more or less completely os x dependant
    (I've had an ibook for a few months now). Anyway, I
    have a few questions:
    1. Does anyone know of a (free) mail notifier tool,
    that will alert me when I recieve new pop3 mail? I
    used to use AIM for this in windows
    The built in email program does sound an alert for new messages.
    2. Anyone know of a good (free, again) IRC client?
    iChat works well.
    3. I noticed earlier that my screen was flickering,
    it seems to have subsided for now, but is that normal
    to encounter in a new display? It wasn't really bad
    flicker, but I could see it.
    No idea.
    4. I leave my desktops on 24/7x365, will that be a
    problem with this iMac? Display shuts off of course
    after 30 mins
    You could set the iMac to go to sleep after non use. My Macs are
    always sleeping when not in use, waking them up takes seconds.
    Unlike windoze, never knew if it would be locked up or not.
    5. Should I get the extended warranty? I'm usually
    against them, but I am expecting this computer to
    last me at least 3 years (for $1300 it better!)
    before I upgrade, as I got that much out of a Dell
    and from what I understand, Mac's do not age nearly
    as fast as Windows pc's.
    It is well worth the cost. Never know what might happen. Also
    it is good insurance for future upgrades. I traded in my G4 tower
    purchased two years ago for 75% of what I paid for it. Apple care
    transfers, giving the buyer the remainder of your warranty.
    Thank you for any help,
    -Evan

  • I recently migrated to a new mac. in iphoto, some photos have a small flag on the upper left of the photo. any idea what that is?

    i recently migrated to a new mac. in iphoto, some photos have a small flag on the upper left of the photo. any idea what that is?

    That's called Flagging. It's a way to make a quick selection of photos. For instance if you're looking for the best shot to print you might go through the photos and flag candidates for further inspection. Then clicking on the Flagged Section on the left, you can see these selected photos together. You can remove flags by clicking on them, if you mouse over a shot you'll see the option to add a flag by clicking. This can also be done in the Photos menu.

  • After migrating to a new MacBook Air from an older MacBook, iPhoto gets stuck on uploading cache, it just "spins" forever. I downloaded a new iPhoto app and replaced it but when opened it just does the same thing? What is going on?

    After migrating to a new MacBook Air from an older MacBook, iPhoto gets stuck on "uploading cache", it just "spins" forever. I downloaded a new iPhoto app and replaced it, but when opened it just does the same thing? What is going on? Where are my photos now? How can I upload photos from my camera without iPhoto?
    Is there a better app?
    Thanks, Chris

    Take the system to an Apple store to be fixed or replaced as the one you have has defective hardware.

  • After migration to a new macbook i cannot open photoshop. I get error message "you can't open this application "adobe photoshop cs" because powerpc applications are no longer supported"

    after migration to a new macbook i cannot open photoshop. I get error message "you can't open this application "adobe photoshop cs" because powerpc applications are no longer supported"

    You cannot run Photoshop CS on a new Intel-based Mac running OS X Mavericks. CS is far too old.
    You'll have to buy Photoshop CS6 or Photoshop Elements 12. Or subscribe to CC.

  • I need to synch my iphone, ipod touch and classic to a Mac that I have and 2 I am about to buy. I have legally paid for all my music. If I use migration on my new Macs and clone the original, can I use my iAppliances on all 3 Macs?

    I need to synch my iphone, ipod touch and classic to a Mac that I have and 2 I am about to buy. I have legally paid for all my music. If I use migration on my new Macs and clone the original, can I use my iAppliances on all 3 Macs?

    Yes.
    You can authorize up to 5 computers to play itunes music ( pre-itunes plus).  There is no limit on itunes plus ( all itunes music for the past several years) and imported music.
    You can sync as many ipods/ipads/iphones as you like to each of your computers.

  • How to watch my Mac iPhoto Library on my iPhone?

    Hi,
    is there a way to watch my Mac iPhoto Library on my iOS devices using Home WiFi?
    I am regurarly sharing my music, clips, films etc, but cannot find a way to share my Photos, although photo sharing is activated on my iPhoto mac... I can see it from my AppleTV, but nothing seen on my iPhone...
    Any help pse?

    That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
    IOS 7 is coming - maybe a change there - who knows
    At this time the only thing iPhoto for IOS and iPhoto for the Mac share is the name - nothing else
    LN

  • I am getting a message that my iphoto library cannot be opened because I mades changes to my photos in a newer version of iphoto and I need to quit and use the newest version of iPhoto.  but i cannot update it and or access my photos.  Help.  thanks.

    I am getting a message that my iphoto library cannot be opened because I mades changes to my photos in a newer version of iphoto and I need to quit and use the newest version of iPhoto.  but in update, it says i have no updates.   i dont even remember making changes in iphoto.Help.  thanks.

    What version of iPhoto? Assuming 09 or later...
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • Migration to a new mac

    I have a time machine backup of my mac and a bootable clone of my harddrive. If i were to migrate to a new mac using time machine would all of my software that is lisened to my current mac still function or would my software still be registered or would i need to buy a new licence for everthing?

    It will all work the saame.

  • When I try to open iPhoto I get the error message "The library "iPhoto Library" cannot be opened.

    When I try to open iPhoto I get the error message "The library "iPhoto Library" cannot be opened. To open it, you must upgrade to the latest version of IPhoto." But the app store says that the latest version is installed.
    I just migrated from 2011 macbook to new 2014 macbook with Yosemite on it.
    Here is the main error - Dyld Error Message:   Library not loaded: /Library/Frameworks/NyxAudioAnalysis.framework/Versions/A/NyxAudioAnalysis   Referenced from: /Applications/iPhoto.app/Contents/Frameworks/iLifeSlideshow.framework/Versions/ A/iLifeSlideshow   Reason: image not found
    MacBook Pro 2.8 GHz Intel Core i7 16 GB 1600 MHz DDR3
    OSX 10.10.1
    IPhoto 9.6
    Any help much appreciated.

    There is a framework missing in your System library. You need to reinstall MacOS X to restore the dynamic library:
    See:
    Dyld Error Message:
      Library not loaded: /Library/Frameworks/NyxAudioAnalysis.framework/Versions/A/NyxAudioAnalysis
      Referenced from:
    Have you run any cleaner applications that could have removed files, or installed third party software lately?
    To reinstall the system, boot into Recovery:
    See this page:  OS X: About OS X Recovery
    -- Léonie
    Added:
    How are you launching iPhoto? From your Dock? The Dock icon may still be linked to an older iPhoto version. Just to be sure, you are opening really iPhoto 9.6, launch iPhoto by double-clicking the iPhoto icon in your applications folder. Your crash log  with the the "Library not found" error message should show the version number of iPhoto. Which version is it showing?

  • Buying a new Mac and try to save all information from iPhone in new iTunes, is it possible? how?

    Buying a new Mac and try to save all information from iPhone in new iTunes, is it possible? how?

    The easiest thing to do is transfer the library from the old computer to the new one.  Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to choose a library, then select the copied iTunes folder.  If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music  then you don't even need to start with the option key held down, iTunes will automatically look for it there.  (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
    If you do not have access to the old library (and you always should in the form of a backup you regularly make of your computer and store on a drive in a safe place) and this phone has been synced with a different library you can backup certain items, then erase the phone and restore those items.  This will not include media not purchased from the iTunes Store.
    iOS: How to back up and restore your content - http://support.apple.com/kb/HT1766 - "Learn how to back up and restore the content on your iPhone, iPad, or iPod touch using iCloud or iTunes."
    Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself independently backed up against loss.  To use a device with a new computer you transfer the content from the old computer (or its backup) directly to the new computer, not the device to the new computer. Media syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software.  See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991

Maybe you are looking for

  • Accessing postgresql record using servlet

    Hello every body, I am trying to access the postgresql database using servlet. But I found the error of ClassNotFound exception: org.postgresql.Driver. One thing more I am using eclipse ide. I have used the postgresql-8.1-404.jdbc3 driver. And I have

  • Convert mts to burn video with idvd

    What's the best way to convert/ import MTS video files from camcorder to IDVD for burning & playback on any DVD player?

  • How to create an attribute editable with WebWord Editor

    Hello, When I create a new element type, I can set the basic element type to text. It adds a text attribute to the element type that is editable with WebWord Editor by default. Now let's say that I want to have several text attributes in my element t

  • A question about explain plan

    here is my sql statement and running result: SQL> @bind_variables_peeking_test.sql SQL> SET ECHO OFF SQL> SQL> REM SQL> REM Setup test environment SQL> REM SQL> SQL> ALTER SYSTEM FLUSH SHARED_POOL; SQL> SQL> DROP TABLE t; DROP TABLE t ERROR at line 1

  • AS3 Tween doesn't work proprly

    Hi All, I have a MovieClip with two buttons inside of it (bottom portion) When I mouse over the MovieClip - it rises up, to revewl the buttons. My problem is, when I mouse over the buttons, the movie clip drops back down. The buttons don't have any a