After migration Exchange 2013, MBX server, CPU utilization is so high

CPU utilization become so high this morning after migration into Exchange 2013,
Some healthy DBs is getting disccounetced with growing replay Queue length, mounted DB is no issue.
It seems that's short of CPU performance,
Are there any processes to limit or set up to reduce the load of CPU, MBX servers? It's temporary treatment...

What's the CU level you have for your Exchange 2013? Also, please check node runner processor as Node Runner process can cause CPU utilization issue. I would also suggest to check your disk IOPs as it looks like disk IOPs issue to me as well. Thanks.
Regards, Riaz Javed Butt | Consultant Microsoft Professional Services MCITP, MCITP (Exchange), MCSE: Messaging, MCITP Office 365 | mstechtalk.com

Similar Messages

  • After Migration Exchange 2013 does not send mail outside the organization

    Dear,
    After Migration Exchange 2010 to exchange 2013. We does not send email from the organization but we can received mail from others organization.
    Delivery has failed to these recipients or groups:
    [email protected] ([email protected]) The server has tried to deliver this message,
    without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk.
    Diagnostic information for administrators:
    Generating server: OGMAIL.domain.net Receiving server: gmail.com (2607:f8b0:400c:c01::1a)
    [email protected] 6/11/2014 10:16:10 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '550 4.4.7 QUEUE.Expired; message expired' 6/11/2014
    10:03:49 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover
    to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 2607:f8b0:400c:c01::1a:25'
    Original message headers:
    Received: from OGMAIL.domain.net (192.168.10.12) by ogmail.domain.net
     (192.168.10.12) with Microsoft SMTP Server (TLS) id 15.0.847.32; Mon, 9 Jun
     2014 16:13:30 +0600
    Received: from OGMAIL.domain.net ([::1]) by ogmail.domain.net ([::1]) with
     mapi id 15.00.0847.030; Mon, 9 Jun 2014 16:13:30 +0600
    From: Administrator <[email protected]>
    To: Administrator <[email protected]>
    CC: IT.HW-Masudur Rahman-MRT <[email protected]>, "[email protected]"
        <[email protected]>
    Subject: RE: Migration batch mrtmove has completed successfully.
    Thread-Topic: Migration batch mrtmove has completed successfully.
    Thread-Index: AQHPd1JEcid9YEi4F0ue6m1039EwR5top+xp
    Date: Mon, 9 Jun 2014 10:13:29 +0000
    Message-ID: <[email protected]>
    References: <[email protected]>
    In-Reply-To: <[email protected]>
    Accept-Language: en-US
    Content-Language: en-US
    X-MS-Has-Attach:
    X-MS-TNEF-Correlator:
    x-originating-ip: [192.168.10.2]
    Content-Type: multipart/alternative;
          boundary="_000_6b0d846f503942d99d44be9aff8d6adfogmaildomainnet_"
    MIME-Version: 1.0
    Queue viewer:
    Identity: ogmail\8786\3470333575194
    Subject: testing
    Internet Message ID: <[email protected]>
    From Address: [email protected]
    Status: Active
    Size (KB): 4
    Message Source Name: SMTP:Default OGMAIL
    Source IP: 192.168.10.12
    SCL: -1
    Date Received: 6/23/2014 3:22:49 PM
    Expiration Time: 6/25/2014 3:22:49 PM
    Last Error: 
    Queue ID: ogmail\8786
    Recipients:  [email protected];2;2;[{LRT=};{LED=};{FQDN=};{IP=}];0;CN=SendMail,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft
    Exchange,CN=Services,CN=Configuration,DC=domain,DC=net;0
    Md. Ramin Hossain

    What I notice is Queue expired. The message is not going out.
    Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
    This error states that It tried to connect to the target system but failed to connect out.
    Is Exchange 2013 server added in the firewall rule to send communication over port 25?
    Do you have use Front end proxy checkbox checked on the Send connector to internet that was created on 2013 (if created)?
    If use front end proxy checkbox is checked, then you need to add permissions for your CAS server's IP in the Firewall for outbound port 25 rule. As it appears that the mail is originating from CAS to the firewall. If that checkbox is not checked, we need
    to add the Mailbox server's IP on the outbound rule for port 25.

  • New Exchange 2013 CAS server in existing Exchange 2007 Organization

    Dear Friends,
    We have exchange 2007 SP3 with CU13 installed with single copy cluster for database and 1 OWA server for CAS/HT. We will migrate from current to Exchange 2013SP1. As we want to have HA, we have installed 2 new Exchange 2013 SP1 CAS server on widnows 2012
    R2 after preparing our organisation for Exchange 2013. The setup went smooth without any error and successfully installed CAS with management tools. After installation it ask to reboot the server which we did. Now after reboot, we are not able to run Exchange
    Management Sell. It never connects to the new server. In our old 2007 EMS also doesn't list any exchange 2013 server. We are also not able to connect to new CAS servers with below URL:
    https://servername/ecp/?ExchClientVer=15
    Its says site under maintenance. Please advise what to check. We were thinking of deploying CAS 1st and make it co-exist with Exchange 2007 before deploying Exchange 2013 mailbox server which will be setup in DAG. What are we doing wrong.
    Thanks in advance!!

    Dear Friends,
    We have exchange 2007 SP3 with CU13 installed with single copy cluster for database and 1 OWA server for CAS/HT. We will migrate from current to Exchange 2013SP1. As we want to have HA, we have installed 2 new Exchange 2013 SP1 CAS server on widnows 2012
    R2 after preparing our organisation for Exchange 2013. The setup went smooth without any error and successfully installed CAS with management tools. After installation it ask to reboot the server which we did. Now after reboot, we are not able to run Exchange
    Management Sell. It never connects to the new server. In our old 2007 EMS also doesn't list any exchange 2013 server. We are also not able to connect to new CAS servers with below URL:
    https://servername/ecp/?ExchClientVer=15
    Its says site under maintenance. Please advise what to check. We were thinking of deploying CAS 1st and make it co-exist with Exchange 2007 before deploying Exchange 2013 mailbox server which will be setup in DAG. What are we doing wrong.
    Thanks in advance!!
    If you have only the 2013 CAS installed and not the mailbox role, then nothing will really work. Remember, in 2013, the mailbox role does all the work, the CAS is simply a proxy for the most part.
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Getting Error while installing Exchange 2013 on server 2012

    Error During Exchange 2013 Mailbox Transport
    Role Install On Server 2012 
    Exchange
    Server forums
     > 
    Exchange
    Server 2013 - Setup, Deployment, Updates, and Migration
    Question
    1
    Sign
    in to vote
    I was installing Exchange 2013 on Server 2012.  The server is not a DC, but is a member of a domain with a 2008 R2 functional level, and I was logged in as a domain admin.  There has never been an Exchange instance on this domain.  I got past
    the prerequisite checks, and the installer showed 15 steps, so I walked away.  When I came back, I saw this:
    Step 8 of 15: Mailbox role: Transport service
    Error:
    The following error was generated when "$error.Clear(); 
              $maxWait = New-TimeSpan -Minutes 8
              $timeout = Get-Date;
              $timeout = $timeout.Add($maxWait);
              $currTime = Get-Date;
              $successfullySetConfigDC = $false;
              while($currTime -le $timeout)
                $setSharedCDCErrors = @();
                try
                  Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
                  $successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
                  if($successfullySetConfigDC)
                    break;
                  Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
                catch
                  Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
                Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
                Start-Sleep -Seconds 30;
                $currTime = Get-Date;
              if( -not $successfullySetConfigDC)
                Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
            " was run: "Unable to set shared config DC.".

    Hi Deepak,
    From the error description, I would like to clarify the following things:
    1. Please ensure that IPv6 on the network adaptor is turned on.
    2. Please check if the account that you used to install Exchange has necessary permissions to perform the installation.
    3. Make sure that DNS is configured correctly.
    Hope my clarification is helpful.
    If there are any problems, please feel free to let me know.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • How to introduce exchange 2013 mailbox server in an existing Exchange 2010 Environment

    Hi All,
    we are planning to install exchange 2013 mailbox server in an Exchange 2010 environment. we have 3 MB servers, 1 CAS 1 HUB which is installed with Exchange 2010 SP3 Enterprise Edition. how to install new exchange server 2013  and i have to add the 2013
    servers in to existing DAG and migrate all mailboxes in to 2013 server. Please advise me from the scratch. also will it be create any impact in my existing setup.
    Thanks, Venkatesh. &quot;Hardwork Never Fails&quot;

    For a step by step follow the deployment assistant
    http://technet.microsoft.com/en-US/exdeploy2013/Checklist?state=2419-W-AAAAAAAAQAAAAAEAAAAAAAA%7e
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Support for TLS 1.2 over Exchange 2013 on Server 2012?

    Greetings,
    We're trying to roll out TLS 1.2 in our test environment and can't seem to get Exchange to work with the protocol.
    We've been using this method to enable TLS 1.2 (and disable the other protocols - TLS1.0, SSL2.0, SSL3.0, PCT1.0): http://www.adminhorror.com/2011/10/enable-tls-11-and-tls-12-on-windows_1853.html
    We originally tried using Exchange 2010 on 2008 R2, but then I ran across this article saying that it is not supported: http://support.microsoft.com/kb/2709167/en-us
    We've since tried to set it up with Exchange 2013 on Server 2012. Still no luck. The only time Exchange wants to work is when TLS1.0 is enabled.
    I suspect that TLS1.1 and TLS 1.2 are also not supported on Exchange 2013, or that I'm changing the wrong registry keys, but I wanted to find confirmation. I've searched extensively and can't find any documentation leading me to believe one way or the other
    if it's supported.
    Any help or insight would be greatly appreciated. Thanks!
    --Aric

    hi All,
    Even i have tried enabling TLS 1.2 on Exchange 2013 from registry. i followed the below article.
    http://jackstromberg.com/2013/09/enabling-tls-1-2-on-iis-7-5-for-256-bit-cipher-strength/
    When i check OWA in chrome and check the connection information it says "The connection uses TLS 1.2.
    However when i run the below command to check for TLS 1.2 i get the following O/P.
    Command: java -jar TestSSLServer.jar ns-ex13.gtestexchange.com 443
    O/P:
    Supported versions: SSLv3 TLSv1.0 TLSv1.1
    Deflate compression: no
    Supported cipher suites (ORDER IS NOT SIGNIFICANT):
      SSLv3
         RSA_WITH_RC4_128_MD5
         RSA_WITH_RC4_128_SHA
         RSA_WITH_3DES_EDE_CBC_SHA
      TLSv1.0
         RSA_WITH_RC4_128_MD5
         RSA_WITH_RC4_128_SHA
         RSA_WITH_3DES_EDE_CBC_SHA
         RSA_WITH_AES_128_CBC_SHA
         RSA_WITH_AES_256_CBC_SHA
         TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
         TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
      (TLSv1.1: idem)
    Server certificate(s):
      1979e6bdbd9b8e197d00c45534959eaba82b6f40: CN=ex10.gtestexchange.com, OU=Domain
     Control Validated
    Minimal encryption strength:     strong encryption (96-bit or more)
    Achievable encryption strength:  strong encryption (96-bit or more)
    BEAST status: vulnerable
    CRIME status: protected
    ===================================================
    It doesnt says anything about TLS 1.2.
    Any suggestions from your side?

  • Please help, after migrating to snow leopard Server my VPN is not working

    Hi,
    After migrated to Snow Leopard Server, my VPN settings are not working, My users not able to connect to VPN.
    Please find below log. Please let me know the solution for it.
    2010-01-05 13:19:32 IST Incoming call... Address given to client = 192.168.1.72
    Tue Jan 5 13:19:33 2010 : Directory Services Authentication plugin initialized
    Tue Jan 5 13:19:33 2010 : Directory Services Authorization plugin initialized
    Tue Jan 5 13:19:33 2010 : PPTP incoming call in progress from '95.222.205.164'...
    Tue Jan 5 13:19:33 2010 : PPTP connection established.
    Tue Jan 5 13:19:33 2010 : using link 0
    Tue Jan 5 13:19:33 2010 : Using interface ppp0
    Tue Jan 5 13:19:33 2010 : Connect: ppp0 <--> socket[34:17]
    Tue Jan 5 13:19:33 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x2794ebf2> <pcomp> <accomp>]
    Tue Jan 5 13:19:34 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x29205274> <pcomp> <accomp>]
    Tue Jan 5 13:19:34 2010 : lcp_reqci: returning CONFACK.
    Tue Jan 5 13:19:34 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x29205274> <pcomp> <accomp>]
    Tue Jan 5 13:19:36 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x2794ebf2> <pcomp> <accomp>]
    Tue Jan 5 13:19:36 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x2794ebf2> <pcomp> <accomp>]
    Tue Jan 5 13:19:36 2010 : sent [LCP EchoReq id=0x0 magic=0x2794ebf2]
    Tue Jan 5 13:19:36 2010 : sent [CHAP Challenge id=0x8d <620015595e4967664c1310241b4b3254>, name = "nova.thecoverstory.com"]
    Tue Jan 5 13:19:36 2010 : rcvd [LCP EchoReq id=0x0 magic=0x29205274]
    Tue Jan 5 13:19:36 2010 : sent [LCP EchoRep id=0x0 magic=0x2794ebf2]
    Tue Jan 5 13:19:36 2010 : rcvd [LCP EchoRep id=0x0 magic=0x29205274]
    Tue Jan 5 13:19:39 2010 : sent [CHAP Challenge id=0x8d <620015595e4967664c1310241b4b3254>, name = "nova.thecoverstory.com"]
    Tue Jan 5 13:19:40 2010 : rcvd [CHAP Response id=0x8d <c68742dc9457be5a61e444f00f53371d000000000000000044c6f89fa49ed8bf4c17a2861a2cfd 04ae1e6b9199527f9f00>, name = "jenny"]
    Tue Jan 5 13:19:40 2010 : DSAuth plugin: Error -25300 while retrieving key agent password from the system keychain.
    Tue Jan 5 13:19:40 2010 : DSAuth plugin: Could not retrieve key agent account information.
    Tue Jan 5 13:19:40 2010 : sent [CHAP Success id=0x8d "S=B503F226B4DE4105A4711C0EA2E7C21B1A9A935D M=Access granted"]
    Tue Jan 5 13:19:40 2010 : CHAP peer authentication succeeded for jenny
    Tue Jan 5 13:19:40 2010 : DSAccessControl plugin: User 'jenny' authorized for access
    Tue Jan 5 13:19:40 2010 : MPPE required, but keys are not available. Possible plugin problem?
    Tue Jan 5 13:19:40 2010 : sent [LCP TermReq id=0x2 "MPPE required but not available"]
    Tue Jan 5 13:19:40 2010 : Connection terminated.
    Tue Jan 5 13:19:40 2010 : Connect time 0.2 minutes.
    Tue Jan 5 13:19:40 2010 : Sent 0 bytes, received 0 bytes.
    Tue Jan 5 13:19:40 2010 : PPTP disconnecting...
    Tue Jan 5 13:19:40 2010 : PPTP disconnected
    2010-01-05 13:19:40 IST --> Client with address = 192.168.1.72 has hungup
    Thanks,
    Gulab Pasha

    Great !! save my trouble too
    thanks a lot for the tip.

  • Deploy Exchange 2013 , Lync server 2013 and shrepoint server 2013

    Hi dears ,
    I have a deployment requirement in which I have to plan for deploy Exchange 2013 , Lync server 2013 and SharePoint server 2013 on premise for 500 user and for one organization , now I have been asked to provide the software and hardware requirement
    for this deployment .
    so I wonder , is there any guide or link to find the hardware and software requirements for this deployment ?

    Hi,
    You can refer to the link below about the hardware/system requirements for Lync Server 2013:
    https://technet.microsoft.com/en-us/library/gg398438.aspx
    Note: it is not supported to install Lync Server in the same computer with DC, Exchange Server and SharePoint Server.
    If you want to deploy Lync Server, you’d better read the guide firstly before deploy it:
    https://technet.microsoft.com/en-us/library/gg398616.aspx
    For the deployment of Exchange 2013 and SharePoint 2013, you can also post case on Exchange and SharePoint forum, and there are more experts will help you:
    Exchange 2013:
    https://social.technet.microsoft.com/Forums/office/en-US/home?category=exchangeserver
    SharePoint 2013:
    https://social.technet.microsoft.com/Forums/office/en-US/home?category=sharepoint
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • ActiveSync is not working properly after migrating to new Exchange 2013 SP1 server?!

    Few weeks ago we have added new Exchange 2013 SP1 onto our existing Exchange 2007 environment. I have migrated my mailbox to the new Ex2013 server. Everything (send/receive - internally/externally, OWA, OutlookAnywhere) for me and the existing Ex2007
    users works fine. The only thing I have trouble with is the ActiveSync! After migrating to the new Ex2013 server my phone stops getting new emails…, existing Ex2007 users don’t have any problems with their mobile phones.
    I did ActiveSync test for my user account with ActiveSync Tester and here is what I have:
    As you can see from the error above  ActiveSync Tester detects ActiveSync on Ex2013 server however something wrong there with form-based auth?! I can’t see any differences in settings for ActiveSync virtual folders in Ex2007 and Ex2013
    virtual folders?!
    What I’m missing here?! Please help.

    Check if the Exchange Servers group does not have the appropriate permission to the mailbox object in Active Directory.
    To check whether inheritance is disabled on the user:
    1.Open Active Directory Users and Computers.
    2.On the menu at the top of the console, click View > Advanced Features.
    3.Locate and right-click the mailbox account in the console, and then click Properties.
    4.Click the Security tab.
    5.Click Advanced.
    6.Make sure that the check box for "Include inheritable permissions from this object's parent" is selected.
    Ref:
    http://technet.microsoft.com/en-us/library/dd439375(v=exchg.80).aspx
    Also check the Virtual directory authentication
    Microsoft-Server-ActiveSync
     •Basic authentication
     •SSL required
     •Requires 128-bit encryption
    Ref:
    http://technet.microsoft.com/en-us/library/gg247612(v=exchg.150).aspx
    Check the IIS log if you are able to find any error message on it
    Exchange Queries

  • Migrating Exchange 2013 public mailboxes to a new server

    We have a client that is leaving their current Hosting company and wants to move to our hosting facility. We have recreated their DC,an Exchange Hub, and Exchange Store. We have exported and imported all of their recipient mailboxes and flipped the switch
    and all mail flow is now going through our hosting facility. The problem lies in that I can not figure out how to move the public mailboxes out of the old exchange server and import it into the new server. Both are Exchange 2013 and running on windows server
    2012. Any help would be greatly appreciated. 

    You're looking at a third-party product.  MigrationWiz does public folders.  There are other cloud-based migration solutions, but I don't know whether they support public folder migrations.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Issue removing Exchange 2007 after migration to 2013

    After migrating relatively successfully from Exchange 2007 to 2013, I am in the process of trying to decommission and uninstall 2007 from the servers. Through this process I have been following a guide found
    here. Our old 2007 servers have been off for over two weeks and it seems like a good time to remove them and reclaim some space. I removed the old OAB and Mailbox DB, however when I attempted to remove the Public Folders so I could take the PF DB out the
    following error appeared.
    Get-PublicFolder : There is no existing PublicFolder that matches the following Identity: '\'.
    I know that there are Public Folders existing as I can see them when I run Get-PublicFolderStatistics:
    I've been back and forth across the forums and web and haven't been able to find a solution to this. Ultimately we never have and are not interested in using public folders but they were originally configured when we had a contractor move us from 2003 >
    2007 several years ago. What I would like is to remove all traces of this garbage and just be able to uninstall/delete the old servers and move on with life.
    Any help is greatly appreciated. Thank you in advance.
    Jon Howard

    Hi,
    Have you tried to use Exfolders tool to remove PF?
    More details about exfolders tool refer to the following article:
    http://gallery.technet.microsoft.com/office/Exchange-2010-SP1-ExFolders-e6bfd405
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Migrated Exchange 2013 server - blocking common emails like netflix and amazon?

    We were using Exchange 2010 for years, and recently I upgraded to Exchange 2013 and signed up for Exchange Online Protection over the weekend (all at the same time, upgrade, migration, sign up for EOP, etc.).  Some mail is making it through just fine,
    while a lot of email is being blocked.  EOP says the email was "delivered" but MessageTracking on our exchange box says Event ID: FAIL...
    I'd like to know more about the FAIL ID... how do I find out what made it fail?  I'm guessing it was a transport rule, but when I got to Mail Flow -> Rules - there is NOTHING there.  
    Running "Get-TransportAgent" returns these values:
    I disabled the malware agent manually on my box since I'm using the EOP stuff now... how can I see or edit the rules that are in place if they do not show up as rules in the ECP?
    It's big name companies like amazon, netflix, etc that are getting blocked... I can't see a reason why they would be blocked now on a migrated server and not on my old server... Can anyone provide some insight?  I'd GREATLY appreciate it!

    I would tend to agree with you that you don't need them.
    http://www.msexchange.org/articles-tutorials/exchange-server-2013/security-message-hygiene/anti-spam-and-anti-malware-protection-exchange-2013-part1.html
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Copy to my calendar missing after migration Exchange 2010-2013

    Hi there,
    We have migrated our Exchangeserver from Exchange 2003 too 2010 and then too 2013.
    In Outlook 2007 (with Exchange 2003 and later 2010) we had a button in the 'New appointment window' called 'Copy to my Calander' When we made an appointment in a Public Calander.
    After migrating to Exchange 2013 the button is missing, but we're still using the Public folder (Calander).
    Is there a solution for this?

    Hi,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Exchange 2013 CU7 server performance/outage issues.

    Hi Forum,
    We are constantly faced with incidents from users that the connections are lost with the exchange server. As a result, we hired a consultant to install an new Exchange 2013 environment based on the Microsoft, VM-Ware and NetApp best practices.
    We are still having problems with performance issues. From the client prospective, the performance has not changed, weekly hangs are still happening and I’m at my wits end.
    This is our configuration:
    2 Windows Server 2012 R2 CAS and DB
    VM with 4 vCpu, 16GB, 1 Vmxnet3, IPv6 disabled (the Microsoft way)
    VM Ware 5.1 U1
    Cluster without AAP
    DB1 active on Server 1 (Datacenter 1 with 3 host cluster)
    DB2 active on Server 2 (Datacenter 2 with 3 host cluster)
    Veeam 8 Backup (Move-ActiveMailboxDatabase DB2 -ActivateOnServer Server1 , backup server 2 then Move-ActiveMailboxDatabase back to
     Server2.
    Exchange is in Online-Mode due to Citrix XD VDI clients.
    1300 Mailboxes and 750 users.
    NetApp with SATA disks. (1.5TB E: Vol for DB1/1.5TB F: Vol for DB2)
    No archiving
    Unlimited mailbox sizes.
    The problems are:
    If we migrate a non-Exchange VM in the same cluster or to\from the same host, this results in a 30 second to 5 min Outlook outage;
    If we make both DB’s active on mail server 1 and reboot server 2, this results in a 30 second to 5 min Outlook outage;
    If we make both DB’s active on mail server 1 and do a Veeam backup of server 2, sometimes one of the DB’s go back to server 1, on its own;
    While monitoring we see that the w3wp.exe and the Microsoft.Exchange.Store.worker.exe are consuming most of the cpu and memory;
    What can I do to solve the outages?
    Tnx. Timotatty.
    Exchange server performance issues.
    Hi Forum,
    We are constantly faced with incidents from users that the connections are lost with the exchange server. As a result, we hired a consultant to install an new Exchange 2013 environment based on the Microsoft, VM-Ware and NetApp best practices.
    We are still having problems with performance issues. From the client prospective, the performance has not changed, weekly hangs are still happening and I’m at my wits end.
    This is our configuration:
    2 Windows Server 2012 R2 CAS and DB
    VM with 4 vCpu, 16GB, 1 Vmxnet3, IPv6 disabled (the Microsoft way)
    VM Ware 5.1 U1
    Cluster without AAP
    DB1 active on Server 1 (Datacenter 1 with 3 host cluster)
    DB2 active on Server 2 (Datacenter 2 with 3 host cluster)
    Veeam 8 Backup (Move-ActiveMailboxDatabase DB2 -ActivateOnServer Server1 , backup server 2 then Move-ActiveMailboxDatabase back to
     Server2.
    Exchange is in Online-Mode due to Citrix XD VDI clients.
    1300 Mailboxes and 750 users.
    NetApp with SATA disks. (1.5TB E: Vol for DB1/1.5TB F: Vol for DB2)
    No archiving
    Unlimited mailbox sizes.
    The problems are:
    If we migrate a non-Exchange VM in the same cluster or to\from the same host, this results in a 30 second to 5 min Outlook outage;
    If we make both DB’s active on mail server 1 and reboot server 2, this results in a 30 second to 5 min Outlook outage;
    If we make both DB’s active on mail server 1 and do a Veeam backup of server 2, sometimes one of the DB’s go back to server 1, on its own;
    While monitoring we see that the w3wp.exe and the Microsoft.Exchange.Store.worker.exe are consuming most of the cpu and memory;
    What can I do to solve the outages?
    Tnx. Timotatty.

    Hi Simon,<o:p></o:p>
    Apparently we are using basic authentication which result in a FailingCode=401 as seen in the Event Log under Active Monitoring --> Probe Results from ECP and others. This
    became apparent after reading this blog:
    http://blogs.technet.com/b/ehlro/archive/2014/02/20/exchange-2013-managed-availability-healthset-troubleshooting.aspx<o:p></o:p>
    We are now overriding some of the monitors which require Forms Based Authentication.<o:p></o:p>
    Regarding the other 2 issues we have changed the licensing model for Veeam 8 to allow full throughput which will reduce the backup time and add compression.
    The KEMP support team helped us by deselecting Use HTTP/1.1 under View/Modify Services --> ECP –> Modify --> Real Servers. This
    now only flags a service (ECP or ActiveSync or OWA) as being down instead of an etire server should one component fail.<o:p></o:p>
    I am satisfied but still not happy with the steps required to troubleshoot an Unhealthy Health Sets:<o:p></o:p>
    Invoke-MonitoringProbe always returns with: WARNING: Could not find assembly or object type associated with monitor identity '<Healthe Set >\< Probe >'. Please ensure
    that the given monitor identity exists on the server.
    This makes it very difficult to troubleshoot
    Unhealthy Health Sets.
    Regards,
    Timotatty

  • Some Outlook clients getting internal FQDN of newly installed Exchange 2013 CAS server as Outlook Anywhere Proxy address

    Hello Folks,
    I have this problem and is making me crazy if anyone have any idea please shed some light on this:-
    1. Working Outlook 2010 and 2013 clients with webmail.xyz.com as Outlook Anywhere proxy address.
    2. Installed new Exchange 2013 server (server02)with CAS and Mailbox role, Exchange install wizard finished and server is rebooted.
    3. Server came up online started changing internal and external FQDN's of Virtual Directories and Outlook Anywhere to webmail.xyz.com
    4. As soon as Fqdn's changed some outlook clients create support request that Outlook suddenly white's out and after reopening it is giving error  cannot connect to exchange. upon checking Clients Exchange Proxy address is set to http://server02.xyz.com,
    even though OA/OWA/ECP/OAB/EWS/Autodiscover/ActiveSync FQDN's Point to webmail.xyz.com, on all servers if i create new outlook profile for same user it picks up correct settings through autodiscover and connects fine, this is happening to about 20% of outlook
    clients every time i am introducing new Exchange 2013 server in Organization. we have around 2000 users and planning on installing 4 exchange servers to distribute load and everytime changing outlook profile of close to 150-200 users is not possible.
    Any help is greatly appreciated.
    Thanks
    Cool

    Here are the EXCRA results
    Here IP (x.x.x.x) returned is my Load Balancer IP (Webmail.xyz.com).    
    Connectivity Test Successful with Warnings
    Test Details
         Testing Outlook connectivity.
         The Outlook connectivity test completed successfully.
              Additional Details
         Elapsed Time: 9881 ms.
              Test Steps
              The Microsoft Connectivity Analyzer is attempting to test Autodiscover for [email protected].
         Autodiscover was tested successfully.
              Additional Details
         Elapsed Time: 2063 ms.
              Test Steps
              Attempting each method of contacting the Autodiscover service.
         The Autodiscover service was tested successfully.
              Additional Details
         Elapsed Time: 2063 ms.
              Test Steps
              Attempting to test potential Autodiscover URL https://xyz.com:443/Autodiscover/Autodiscover.xml
         Testing of this potential Autodiscover URL failed.
              Additional Details
         Elapsed Time: 186 ms.
              Test Steps
              Attempting to resolve the host name xyz.com in DNS.
         The host name couldn't be resolved.
           Tell me more about this issue and how to resolve it
              Additional Details
         Host xyz.com couldn't be resolved in DNS InfoNoRecords.
    Elapsed Time: 186 ms.
         Attempting to test potential Autodiscover URL https://autodiscover.xyz.com:443/Autodiscover/Autodiscover.xml
         Testing of the Autodiscover URL was successful.
              Additional Details
         Elapsed Time: 1876 ms.
              Test Steps
              Attempting to resolve the host name autodiscover.xyz.com in DNS.
         The host name resolved successfully.
              Additional Details
         IP addresses returned: x.x.x.x
    Elapsed Time: 338 ms.
         Testing TCP port 443 on host autodiscover.xyz.com to ensure it's listening and open.
         The port was opened successfully.
              Additional Details
         Elapsed Time: 173 ms.
         Testing the SSL certificate to make sure it's valid.
         The certificate passed all validation requirements.
              Additional Details
         Elapsed Time: 318 ms.
              Test Steps
              The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover.xyz.com on port 443.
         The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
              Additional Details
         Remote Certificate Subject: CN=webmail.xyz.com, Issuer: CN=VeriSign Class 3 Secure Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US.
    Elapsed Time: 219 ms.
         Validating the certificate name.
         The certificate name was validated successfully.
              Additional Details
         Host name autodiscover.xyz.com was found in the Certificate Subject Alternative Name entry.
    Elapsed Time: 1 ms.
         Certificate trust is being validated.
         The certificate is trusted and all certificates are present in the chain.
              Test Steps
              The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=webmail.xyz.com, OU=Terms of use at www.verisign.com/rpa (c)05,.
         One or more certificate chains were constructed successfully.
              Additional Details
         A total of 1 chains were built. The highest quality chain ends in root certificate CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign,
    Inc.", C=US.
    Elapsed Time: 36 ms.
         Analyzing the certificate chains for compatibility problems with versions of Windows.
         Potential compatibility problems were identified with some versions of Windows.
              Additional Details
         The Microsoft Connectivity Analyzer can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature
    isn't enabled.
    Elapsed Time: 5 ms.
         Testing the certificate date to confirm the certificate is valid.
         Date validation passed. The certificate hasn't expired.
              Additional Details
         The certificate is valid. NotBefore = 1/3/2013 12:00:00 AM, NotAfter = 11/16/2015 11:59:59 PM
    Elapsed Time: 0 ms.
         Checking the IIS configuration for client certificate authentication.
         Client certificate authentication wasn't detected.
              Additional Details
         Accept/Require Client Certificates isn't configured.
    Elapsed Time: 289 ms.
         Attempting to send an Autodiscover POST request to potential Autodiscover URLs.
         The Microsoft Connectivity Analyzer successfully retrieved Autodiscover settings by sending an Autodiscover POST.
              Additional Details
         Elapsed Time: 756 ms.
              Test Steps
              The Microsoft Connectivity Analyzer is attempting to retrieve an XML Autodiscover response from URL https://autodiscover.xyz.com:443/Autodiscover/Autodiscover.xml for user [email protected].
         The Autodiscover XML response was successfully retrieved.
              Additional Details
         Autodiscover Account Settings
    XML response:
    <?xml version="1.0"?>
    <Autodiscover xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
    <Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
    <User>
    <DisplayName>Test Exch1</DisplayName>
    <LegacyDN>/o=DOMAIN/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=add423106fbb47d5bf237462f52b8dab-Test Exch1</LegacyDN>
    <DeploymentId>4ec753c9-60d9-4c05-9451-5b24e2d527a7</DeploymentId>
    </User>
    <Account>
    <AccountType>email</AccountType>
    <Action>settings</Action>
    <Protocol>
    <Type>EXCH</Type>
    <Server>[email protected]</Server>
    <ServerDN>/o=DOMAIN/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]</ServerDN>
    <ServerVersion>73C0834F</ServerVersion>
    <MdbDN>/o=DOMAIN/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/[email protected]/cn=Microsoft Private MDB</MdbDN>
    <ASUrl>https://webmail.xyz.com/ews/exchange.asmx</ASUrl>
    <OOFUrl>https://webmail.xyz.com/ews/exchange.asmx</OOFUrl>
    <OABUrl>https://webmail.xyz.com/OAB/6a6a06ad-4717-4636-bd98-0b4fa3aaf4a5/</OABUrl>
    <UMUrl>https://webmail.xyz.com/ews/UM2007Legacy.asmx</UMUrl>
    <Port>0</Port>
    <DirectoryPort>0</DirectoryPort>
    <ReferralPort>0</ReferralPort>
    <PublicFolderServer>webmail.xyz.com</PublicFolderServer>
    <AD>DC-03.domain.xyz.com</AD>
    <EwsUrl>https://webmail.xyz.com/ews/exchange.asmx</EwsUrl>
    <EmwsUrl>https://webmail.xyz.com/ews/exchange.asmx</EmwsUrl>
    <EcpUrl>https://webmail.xyz.com/ecp/</EcpUrl>
    <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-um>
    <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-aggr>
    <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=domain.xyz.com</EcpUrl-mt>
    <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-ret>
    <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-sms>
    <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-photo>
    <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-tm>
    <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;Title=&lt;Title&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-tmCreating>
    <EcpUrl-tmEditing>?rfr=olk&amp;ftr=TeamMailboxEditing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-tmEditing>
    <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-extinstall>
    <ServerExclusiveConnect>off</ServerExclusiveConnect>
    </Protocol>
    <Protocol>
    <Type>EXPR</Type>
    <Server>webmail.xyz.com</Server>
    <ASUrl>https://webmail.xyz.com/ews/exchange.asmx</ASUrl>
    <OOFUrl>https://webmail.xyz.com/ews/exchange.asmx</OOFUrl>
    <OABUrl>https://webmail.xyz.com/OAB/6a6a06ad-4717-4636-bd98-0b4fa3aaf4a5/</OABUrl>
    <UMUrl>https://webmail.xyz.com/ews/UM2007Legacy.asmx</UMUrl>
    <Port>0</Port>
    <DirectoryPort>0</DirectoryPort>
    <ReferralPort>0</ReferralPort>
    <SSL>On</SSL>
    <AuthPackage>Ntlm</AuthPackage>
    <EwsUrl>https://webmail.xyz.com/ews/exchange.asmx</EwsUrl>
    <EmwsUrl>https://webmail.xyz.com/ews/exchange.asmx</EmwsUrl>
    <EcpUrl>https://webmail.xyz.com/ecp/</EcpUrl>
    <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-um>
    <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-aggr>
    <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=domain.xyz.com</EcpUrl-mt>
    <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-ret>
    <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-sms>
    <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-photo>
    <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-tm>
    <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;Title=&lt;Title&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-tmCreating>
    <EcpUrl-tmEditing>?rfr=olk&amp;ftr=TeamMailboxEditing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-tmEditing>
    <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-extinstall>
    <ServerExclusiveConnect>on</ServerExclusiveConnect>
    <EwsPartnerUrl>https://webmail.xyz.com/ews/exchange.asmx</EwsPartnerUrl>
    <GroupingInformation>Default-First-Site-Name</GroupingInformation>
    </Protocol>
    <Protocol>
    <Type>WEB</Type>
    <Port>0</Port>
    <DirectoryPort>0</DirectoryPort>
    <ReferralPort>0</ReferralPort>
    <Internal>
    <OWAUrl AuthenticationMethod="Basic, Fba">https://webmail.xyz.com/owa/</OWAUrl>
    <Protocol>
    <Type>EXCH</Type>
    <ASUrl>https://webmail.xyz.com/ews/exchange.asmx</ASUrl>
    </Protocol>
    </Internal>
    <External>
    <OWAUrl AuthenticationMethod="Fba">https://webmail.xyz.com/owa/</OWAUrl>
    <Protocol>
    <Type>EXPR</Type>
    <ASUrl>https://webmail.xyz.com/ews/exchange.asmx</ASUrl>
    </Protocol>
    </External>
    </Protocol>
    <Protocol>
    <Type>EXHTTP</Type>
    <Server>webmail.xyz.com</Server>
    <ASUrl>https://webmail.xyz.com/ews/exchange.asmx</ASUrl>
    <OOFUrl>https://webmail.xyz.com/ews/exchange.asmx</OOFUrl>
    <OABUrl>https://webmail.xyz.com/OAB/6a6a06ad-4717-4636-bd98-0b4fa3aaf4a5/</OABUrl>
    <UMUrl>https://webmail.xyz.com/ews/UM2007Legacy.asmx</UMUrl>
    <Port>0</Port>
    <DirectoryPort>0</DirectoryPort>
    <ReferralPort>0</ReferralPort>
    <SSL>On</SSL>
    <AuthPackage>Ntlm</AuthPackage>
    <EwsUrl>https://webmail.xyz.com/ews/exchange.asmx</EwsUrl>
    <EmwsUrl>https://webmail.xyz.com/ews/exchange.asmx</EmwsUrl>
    <EcpUrl>https://webmail.xyz.com/ecp/</EcpUrl>
    <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-um>
    <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-aggr>
    <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=domain.xyz.com</EcpUrl-mt>
    <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-ret>
    <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-sms>
    <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-photo>
    <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-tm>
    <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;Title=&lt;Title&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-tmCreating>
    <EcpUrl-tmEditing>?rfr=olk&amp;ftr=TeamMailboxEditing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-tmEditing>
    <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-extinstall>
    <ServerExclusiveConnect>On</ServerExclusiveConnect>
    </Protocol>
    <Protocol>
    <Type>EXHTTP</Type>
    <Server>webmail.xyz.com</Server>
    <ASUrl>https://webmail.xyz.com/ews/exchange.asmx</ASUrl>
    <OOFUrl>https://webmail.xyz.com/ews/exchange.asmx</OOFUrl>
    <OABUrl>https://webmail.xyz.com/OAB/6a6a06ad-4717-4636-bd98-0b4fa3aaf4a5/</OABUrl>
    <UMUrl>https://webmail.xyz.com/ews/UM2007Legacy.asmx</UMUrl>
    <Port>0</Port>
    <DirectoryPort>0</DirectoryPort>
    <ReferralPort>0</ReferralPort>
    <SSL>On</SSL>
    <AuthPackage>Ntlm</AuthPackage>
    <EwsUrl>https://webmail.xyz.com/ews/exchange.asmx</EwsUrl>
    <EmwsUrl>https://webmail.xyz.com/ews/exchange.asmx</EmwsUrl>
    <EcpUrl>https://webmail.xyz.com/ecp/</EcpUrl>
    <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-um>
    <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-aggr>
    <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=domain.xyz.com</EcpUrl-mt>
    <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-ret>
    <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-sms>
    <EcpUrl-photo>PersonalSettings/EditAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-photo>
    <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-tm>
    <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;Title=&lt;Title&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-tmCreating>
    <EcpUrl-tmEditing>?rfr=olk&amp;ftr=TeamMailboxEditing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-tmEditing>
    <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=domain.xyz.com</EcpUrl-extinstall>
    <ServerExclusiveConnect>On</ServerExclusiveConnect>
    </Protocol>
    </Account>
    </Response>
    </Autodiscover>HTTP Response Headers:
    request-id: 9d325a80-f1fd-4496-ac48-2be6bb782c28
    X-CalculatedBETarget: Server01.domain.xyz.com
    X-DiagInfo: Server01
    X-BEServer: Server01
    Persistent-Auth: true
    X-FEServer: Server01
    Content-Length: 11756
    Cache-Control: private
    Content-Type: text/xml; charset=utf-8
    Date: Mon, 25 Aug 2014 19:12:25 GMT
    Set-Cookie: X-BackEndCookie=S-1-5-21-1293235207-2459173341-1304346827-14544=u56Lnp2ejJqBypqcnsfJx5nSy8ucnNLLnJzP0sfKz8/Sy5nHmsiamZrMyZrLgYHPxtDNy9DNz87L387Gxc7Nxc3J; expires=Thu, 25-Sep-2014 00:12:26 GMT; path=/Autodiscover; secure; HttpOnly
    Server: Microsoft-IIS/8.5
    X-AspNet-Version: 4.0.30319
    X-Powered-By: ASP.NET
    Elapsed Time: 756 ms.
         Autodiscover settings for Outlook connectivity are being validated.
         The Microsoft Connectivity Analyzer validated the Outlook Autodiscover settings.
              Additional Details
         Elapsed Time: 0 ms.
         Testing RPC over HTTP connectivity to server webmail.xyz.com
         RPC over HTTP connectivity was verified successfully.
              Additional Details
         HTTP Response Headers:
    request-id: 835acf95-78b7-40ae-b232-117318d1577e
    Server: Microsoft-IIS/8.5
    WWW-Authenticate: Basic realm="webmail.xyz.com",Negotiate,NTLM
    X-Powered-By: ASP.NET
    X-FEServer: Server01
    Date: Mon, 25 Aug 2014 19:12:26 GMT
    Content-Length: 0
    Elapsed Time: 7817 ms.
              Test Steps
              Attempting to resolve the host name webmail.xyz.com in DNS.
         The host name resolved successfully.
              Additional Details
         IP addresses returned: x.x.x.x
    Elapsed Time: 107 ms.
         Testing TCP port 443 on host webmail.xyz.com to ensure it's listening and open.
         The port was opened successfully.
              Additional Details
         Elapsed Time: 180 ms.
         Testing the SSL certificate to make sure it's valid.
         The certificate passed all validation requirements.
              Additional Details
         Elapsed Time: 303 ms.
              Test Steps
              The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server webmail.xyz.com on port 443.
         The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
              Additional Details
         Remote Certificate Subject: CN=webmail.xyz.com, OU=Terms of use at www.verisign.com/rpa (c)05, Issuer: CN=VeriSign Class 3 Secure Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign,
    Inc.", C=US.
    Elapsed Time: 224 ms.
         Validating the certificate name.
         The certificate name was validated successfully.
              Additional Details
         Host name webmail.xyz.com was found in the Certificate Subject Common name.
    Elapsed Time: 0 ms.
         Certificate trust is being validated.
         The certificate is trusted and all certificates are present in the chain.
              Test Steps
              The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=webmail.xyz.com, OU=Terms of use at www.verisign.com/rpa (c)05,
         One or more certificate chains were constructed successfully.
              Additional Details
         A total of 1 chains were built. The highest quality chain ends in root certificate CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign,
    Inc.", C=US.
    Elapsed Time: 34 ms.
         Analyzing the certificate chains for compatibility problems with versions of Windows.
         Potential compatibility problems were identified with some versions of Windows.
              Additional Details
         The Microsoft Connectivity Analyzer can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature
    isn't enabled.
    Elapsed Time: 5 ms.
         Testing the certificate date to confirm the certificate is valid.
         Date validation passed. The certificate hasn't expired.
              Additional Details
         The certificate is valid. NotBefore = 1/3/2013 12:00:00 AM, NotAfter = 11/16/2015 11:59:59 PM
    Elapsed Time: 0 ms.
         Checking the IIS configuration for client certificate authentication.
         Client certificate authentication wasn't detected.
              Additional Details
         Accept/Require Client Certificates isn't configured.
    Elapsed Time: 298 ms.
         Testing HTTP Authentication Methods for URL https://webmail.xyz.com/rpc/[email protected]:6002.
         The HTTP authentication methods are correct.
              Additional Details
         The Microsoft Connectivity Analyzer found all expected authentication methods and no disallowed methods. Methods found: Basic, Negotiate, NTLMHTTP Response Headers:
    request-id: 835acf95-78b7-40ae-b232-117318d1577e
    Server: Microsoft-IIS/8.5
    WWW-Authenticate: Basic realm="webmail.xyz.com",Negotiate,NTLM
    X-Powered-By: ASP.NET
    X-FEServer: Server01
    Date: Mon, 25 Aug 2014 19:12:26 GMT
    Content-Length: 0
    Elapsed Time: 296 ms.
         Attempting to ping RPC proxy webmail.xyz.com.
         RPC Proxy was pinged successfully.
              Additional Details
         Elapsed Time: 454 ms.
         Attempting to ping the MAPI Mail Store endpoint with identity: [email protected]:6001.
         The endpoint was pinged successfully.
              Additional Details
         The endpoint responded in 0 ms.
    Elapsed Time: 1007 ms.
         Testing the MAPI Address Book endpoint on the Exchange server.
         The address book endpoint was tested successfully.
              Additional Details
         Elapsed Time: 2177 ms.
              Test Steps
              Attempting to ping the MAPI Address Book endpoint with identity: [email protected]:6004.
         The endpoint was pinged successfully.
              Additional Details
         The endpoint responded in 906 ms.
    Elapsed Time: 918 ms.
         Testing the address book "Check Name" operation for user [email protected] against server [email protected].
         The test passed with some warnings encountered. Please expand the additional details.
           Tell me more about this issue and how to resolve it
              Additional Details
         The address book Bind operation returned ecNotSupported. This typically indicates that your server requires encryption. The Microsoft Connectivity Analyzer will attempt the Address Book test again with encryption.
    NSPI Status: 2147746050
    Elapsed Time: 825 ms.
         Testing the address book "Check Name" operation for user [email protected] against server [email protected].
         Check Name succeeded.
              Additional Details
         DisplayName: Test Exch1, LegDN: /o=DOMAIN/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=add423106fbb47d5bf237462f52b8dab-Test Exch1
    Elapsed Time: 433 ms.
         Testing the MAPI Referral service on the Exchange Server.
         The Referral service was tested successfully.
              Additional Details
         Elapsed Time: 1808 ms.
              Test Steps
              Attempting to ping the MAPI Referral Service endpoint with identity: [email protected]:6002.
         The endpoint was pinged successfully.
              Additional Details
         The endpoint responded in 953 ms.
    Elapsed Time: 949 ms.
         Attempting to perform referral for user /o=DOMAIN/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=add423106fbb47d5bf237462f52b8dab-Test Exch1 on server [email protected].
         We got the address book server successfully.
              Additional Details
         The server returned by the Referral service: [email protected]
    Elapsed Time: 858 ms.
         Testing the MAPI Address Book endpoint on the Exchange server.
         The address book endpoint was tested successfully.
              Additional Details
         Elapsed Time: 626 ms.
              Test Steps
              Attempting to ping the MAPI Address Book endpoint with identity: [email protected]:6004.
         The endpoint was pinged successfully.
              Additional Details
         The endpoint responded in 156 ms.
    Elapsed Time: 154 ms.
         Testing the address book "Check Name" operation for user [email protected] against server [email protected].
         Check Name succeeded.
              Additional Details
         DisplayName: Test Exch1, LegDN: /o=DOMAIN/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=add423106fbb47d5bf237462f52b8dab-Test Exch1
    Elapsed Time: 472 ms.
         Testing the MAPI Mail Store endpoint on the Exchange server.
         We successfully tested the Mail Store endpoint.
              Additional Details
         Elapsed Time: 555 ms.
              Test Steps
              Attempting to ping the MAPI Mail Store endpoint with identity: [email protected]:6001.
         The endpoint was pinged successfully.
              Additional Details
         The endpoint responded in 234 ms.
    Elapsed Time: 228 ms.
         Attempting to log on to the Mailbox.
         We were able to log on to the Mailbox.
              Additional Details
         Elapsed Time: 326 ms.

Maybe you are looking for

  • How to report a problem in ios 7

    i have found a minot glitch in iphone ios 7... related to the lock screen, how to report it to apple and is it true that if i found a bug i get paid for it ?

  • Calling a function in an external actionscript

    Hi. First of all I'd like to put my hands up and say that what I know about Flash is antiquated (I used to work with Flash 4 / 5), and have now been thrown into the deep end, as it were. I have an application that has a button component. In an extern

  • MessagingException: Failed to load IMAP envelope - trying to read subject

    While trying to getSubject() on an IMAP message from Google, I am getting a MessagingException. The trace clearly shows that the client is already in possession of the subject of the message.. so why does IMAPMessage.getSubject() call into IMAPMessag

  • How do I represent TextArea in Oracle

    Hi All, In Oracle SQL, VARCHAR2 is a popular type for textfield. But, for a textarea with rows="5" and columns="45", what type should I create it as? Is it still VARCHAR2(45) or something else? TIA, Mark

  • Load previous tabs when starting

    I know Mozilla recently created a "feature" that had Firefox load only one tab/page from a previous session upon starting up, regardless of how many tabs/pages were open when Firefox was last closed. I want to reverse this, and have all tabs load sim