After migration from Xp to Windows 7 Email is getting stuck in the Outbox.

We are using USMT 4.0 with all requisite patches for Office 2010 to migrate users from Windows XP to Windows 7. Some of our users are up and running but after a day or two they are unable to send emails and everything is getting stuck in the Outbox.
At this time the only work around is to recreate the entire local profile. Once we do this the user is up and running without issues. Any assistance on this issue would be greatly appreciated!
Thanks,
Tony

Hi,
If the new profile was created, would the issue occur again?
There are several reasons that may cause the email stuck issue, such as Outlook or the mail server is offline, An antispam or antivirus scanner is scanning outgoing mail, Wrong or bad password, or not authenticating properly with the mail server, the message
is too large to send...
We can learn the troubleshooting steps from this link below, which was written by our MVP, Diane Poremsky, who is a well-known expert in Outlook:
http://www.slipstick.com/problems/common-problems-that-cause-email-to-stay-in-the-outbox/
I hope the information is helpful.
Regards,
Melon Chen
TechNet Community Support

Similar Messages

  • Can't send emails on my yahoo mail account. gets stuck in the outbox. tried deleting and reinstalling but it didn't work., can't send emails on my yahoo mail account. gets stuck in the outbox. tried deleting and reinstalling but it didn't work.

    every time i try to send an email from my yahoo mail account it gets stuck in the outbox. i have tried reinstalling my email account but it doesnt work

    Have you tried setting up your Yahoo account using Mac Mail instead of dealing with web based mail?
    It only takes a minute to set this up.
    Open Mac Mail. From the menu bar top of your screen click Mail > Preferences then select the Accounts tab then the Account Information tab.
    Click +
    Enter your name, Yahoo user name and password, click Create.
    If you'd rather not do that, it would help to tell us which Mac OS X you have installed and which version of Safari in your reply.

  • TS4268 I'm stuck on activation for imessage, I sign in but when it goes to verify email it gets stuck. The situation now is that the email verification screen for iMessages is not letting me access my regular msgs. I can only see msgs in notifications

    I'm stuck on activation for imessage, I sign in but when it goes to verify email it gets stuck. The situation now is that the email verification screen for iMessages is not letting me access my regular msgs. Imessage has blocked my regular messages. I can only see msgs in notifications. Even in contacts the option for message contact has vanished.  The phone is just stuck on the verify email screen and my mail is already verified by appleid. iv tried multiple working iTunes accounts but still no go.

    Reset the phone (no data loss): press both the home and power buttons for at least 10 seconds, releasing when the Apple logo appears.

  • From time to time, my outgoing mail messages get stuck in the "outbox".  I'm having trouble resolving the problem.

    From time to time, my outgoing mail messages get stuck in the "outbox".  I'm having trouble resolving the problem.

    I use Comcast. My computer (Mac Air) also uses my iCloud and Me accounts. The message I get back says they are all offline.

  • Emails are getting stuck in my outbox

    We are using Outlook 2003 with a Gmail IMAP account.  Everything was working fine until today when emails started getting stuck in my outbox.  I used to be on an exchange server but have recently switched email accounts and added the IMAP to
    my old outlook.  What should I do so that i can send emails without them getting stuck?

    Hi,
    Maybe you are working Offline:
    http://office.microsoft.com/en-us/outlook-help/switch-between-working-offline-and-online-HP005242598.aspx
    http://office.microsoft.com/en-us/outlook-help/switch-between-working-offline-and-online-HP001232960.aspx#BM4
    Or
    A corrupted Outlook profile, please try creating a new Outlook profile for test:
    http://support.microsoft.com/kb/829918
    If it doesn’t work, check the configuration of Gmail in Outlook:
    Please Note: Since the following web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    http://support.google.com/mail/bin/answer.py?hl=en&answer=77689
    Sincerely
    Rex Zhang
    Rex Zhang
    TechNet Community Support

  • Issues with old calendar items after migration from SBS2008R1 to Windows 2012R2+Exchange 2013

    Hello,
    After migrating a customer from Windows Small Business Server 2008 R1 to Microsoft Windows Server 2012 (DC) and Microsoft Windows Server 2012 & Exchange 2013 there are a few issue regarding
    the GAL and old migrated calender items that we are unable to resolve:
    Old calender items which were Exported to PST when the Server 2008 R1 environment was still live were imported to the new mailbox of the user, located on the Exchange 2013 mail database. This
    seemed to be working just fine.
    The problems arise when a user tries to edit or re-send an old calender item. There actually are 2 problems:
    1. When resending an old calender item, OLD GAL entries are used (even when re-entering the contact details) and the emails are send to nobody and you get the mail back from postmaster
    2. When updating an old calender item you get an error that you do not have permissions, probably because you are NOT the 'old' Exchange user.
    Thanks in advance!

    Did you use Exmerge or similar to export?
    You may have an issue like that explained here.
    http://blogs.technet.com/b/sbs/archive/2009/05/21/cannot-reply-to-old-emails-or-modify-old-calendar-items-after-pst-mail-migration.aspx
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • Firefox 3.6.5, running Windows 7, always gets stuck at the 80% when trying to install initially.

    I've been a long time user of Mozilla Firefox, and have recently upgraded computers, which gave me Windows 7 Home Premium. For the past couple of days I have been trying to install Firefox 3.6.5 but it always gets stuck when its 80% done. Is there something I could do to stop that, or do I need to use a different version of Firefox, and if so, where can I download one?
    == This happened ==
    A few times a week
    == 3 days ago ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; AskTB5.6)

    Do a clean (re)install and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Emails not sending, "stuck" in the outbox and no error message

    I have been trying to send emails for a few days now and they will not send. They go to the outbox file and then the don't leave. There is no error message and my POP account, .mac account, and the smtp.mac.com are all working correctly. I can still receive mail. The emails don't get sent to the draft file.

    What does “my POP account, .mac account, and the smtp.mac.com are all working correctly” mean? Which account has the problem? Those accounts are clearly not working correctly if you have this problem...
    What does “The emails don't get sent to the draft file” mean? Which messages would you expect to be moved to Drafts and as a result of doing what?
    I assume that the account is "online", i.e. Mailbox > Go Online appears disabled (grayed out), right? If that's the case, try this:
    1. In Mail, move any messages waiting in Outbox to another mailbox (e.g. Drafts), to avoid losing them.
    2. Quit Mail.
    3. In the Finder, go to ~/Library/Mail/Mailboxes/.
    4. Locate Outbox.mbox and move it to the Trash.
    5. Open Mail. A new (empty) Outbox.mbox will be created automatically. Check whether the problem is fixed.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

  • 2.45 gb usable out of 4 gb (after migrating from 32 bit windows 7 to 64 bit windows 7)

    i am using windows 7 64 bit. it shows 2.45gb usable out of 4 gb . it was working fine untill i installed 32 bit windows 7 from then onwards it has started to show 2.45 gb usable out of 4gb. i formatted the disk and migrated to 64 bit but the problem
    has not solved it again shows 2.45gb usable out of 4 gb.please help

    HI
    Ensure that your Graphic Card is not sharing the memory with RAM, It could be one reason so get it checked and if yes, the reduce the memory on BIOS for Graphic Card

  • NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

    NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
    then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
    But after applying the above the above patch we are still getting the same error.
    but in the above patch instructions file - Post deployment instructions to create the Variable
    Post Install Instructions:
    - To revert to the 10g navigator behavior for handling conforming dimensions,
    you must set the following session variable via an init block in the RPD:
    NO_FORCE_TO_DETAIL_BIN=1
    The default value for the above variable is 0.
    - Restart all servers (Admin Server and all Managed Server(s))
    but we didn’t find the process to create the specified variable and Initialization block in the RPD
    Can you please suggest us how to go further.
    Our questions are:

    Hi
    Refer the below thread.
    obiee 11g non-conforming dimensions and nQSError 14025
    Might be help you/
    Thanks,
    satya

  • Office Save & Send emails get stuck in Outlook outbox

    Hello All,
    I have a user here that when she uses the Office Save & Send and also Adobe XI Pro send feature to Outlook the email gets stuck in the outbox and will not send. When we recreate the email from within Outlook and attach the file it sends with no issue. We
    are using Exchange 2010 and Windows 7. I have not been able to recreate the issue on my own PC and I have recreated her email profile as well as repair the Office install. I am at a loss. I have seen many posts about email being stuck in the Outbox, but none
    referencing the Save & Send feature.
    Any recommendations would be appreciated.
    Thanks

    Hi,
    Based on the description, when using the Office Save & Send feature, the email would be stuck in Outlook outbox. Without using the Office Save & Send feature, it could send email successfully. This means that Exchange server is ok, it seems the issue
    is related to Outlook. Actually, we have a dedicated support team regarding the Microsoft Office. I recommend you ask your question on our Microsoft Office forum which is staffed by more experts specializing in this kind of problems to get better help.
    http://social.technet.microsoft.com/Forums/office/en-us/home?forum=outlook
    Thanks for understanding.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Cant send emails, they get stuck in outbox, please help..

    I receive mails normally but all sent mails get stuck in the Outbox, i havent made any changes in the configuration recently.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say “Cannot Connect to Server”?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Delete Email on the iPad
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
    How to Mass Delete Emails from iPhone and iPad Inbox (with video)
    http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
    How to add, send and open iPad email attachments
    http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom 

  • When using 3G on my ipad2, gmail won't send mail.  The 2 emails i'm trying to send have 3 pictures attached and are stuck in the Outbox-checkd server under settings

    Been trying to send 2 emails from Ipad2 with pictures attached from gmail.  Both emails have been stuck in my Outbox and gmail continually tries to send but i keep getting a nessage that the gmail server can't be found.  Went under settings, checked server and it seems fine.  I don't have Wifi @home or else i'd try switching.  Any ideas of what could be happenin'?

        daviddavidff, we want you to be able to send and receive! If Earthlink has confirmed the outgoing server settings and you can access the email and send without issue from a labtop I would lean away from it being an issue with the account. If you can receive email then we know the device is communicating with the network.
    I would try deleting the any email in the outbox folder http://bit.ly/1g1labk and then attempt to send a new email. Send the email to your own email address so we can verify success. Let us know if you can then send email.
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • Can only access emails through OWA after migration from exchange 2007 to 2013

    can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
    needed RCA ... plz help..

    Hi,
    From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
    In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Testing of SAP BW system after migration from OS Unix to windows

    Hi Experts,
    I am working on a project wherein testing of BW system is required after migration from OS Unix to Windows.
    If any one has done same set of activities in past or has any idea of this, please share all major test steps required after migration.
    Thanks in advance.
    Regards,
    Neeraj

    Hi Neeraj,
    I will paste the list we used for our upgrade from 3.1 to 7.0. I removed some company specific details. Sorry for the "lay-out", it is copied from excel, this messes up the whole message.
    best regards, André.
    Preparation     PHASE 1
    Review New Functionality     Review BW section on SAPNet for latest information on new release
    Confirm Upgrade Timing (First Sat)    
    GUI Upgrade     Install GUI's for Upgrade Test persons
    "Check Prerequisites     -Operating System
    -SAP Kernel
    -DBMS
    -Disk space
    -R/3 plugin
    -BW software version and SP
    Citrix.."
    "Check Compatibility Reqs with other systems     APO
    ECC6.0"
    Check Compatibility Reqs with 3rd party software     ?
    "Test Team 2004s Delta Training     To
    have idea on new functionality
    not have confusion if looks different.."
    "End User Communication: upgraded system and changes     e.g. right vs left click
    - send out communication twice"
    End User Communication: several "look and feel" sessions  NOTE: incorporate WISBECH !!!    
    Setup Portal connected to BW QA for testing once upgraded     Setup Portal connected to BW DEV for testing once upgraded
    Check best go live date - based on assuption 2 days needed    
    Determine test set  - based on input BS / KU    
    Estimate resources Business for testing    
    BluePrint     PHASE 2
    Check/CleanUp Development Objects     Check all open and not-released developments for release prior to upgrade
    Prepare System Setup     Prepare (if needed) flat-files for test loads
    Check OSS for release notes on objects     Each functional area should check out OSS for release notes on objects (for changes etcu2026, new functionality)
    "Prepare (detail) list of objects to be tested     Complete list of objects to be tested, special attention to custom/non-standard programs, enhancements. List of:
    - extractors
    - process chains
    - reports"
    "Setup delta mechanisms (create transaction data)     BackEnd Test: Financial Extraction and load, process chains
    u2022tbd
    u2022
    u2022 "
    Verification / creation of process chains     Check existence of to-be-tested process chains; if none, create 'sample' process chains
    Realization     PHASE 3
    Prior to Upgrade: Install any necessary frontend software    
    Prior to Upgrade: Install any necessary frontend software (end-users)    
    Prior to Upgrade: Complete any extraction - suspend V3 and scheduled BW jobs    
    Create Sandbox    
    Connect Sandbox to external systems (connections/BDLS)    
    Pre-upgrade steps    
    Perform Upgrade of BW     
    Check connection with R/3/APO    
    Perform system backup    
    "BackEnd Test: Logistics extraction and load, process chains
    u2022 Z_example_CHAIN
    u2022 2lis_03_BF and 2lis_03_BX     Test:
    - Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
    - Delta extraction"
    "BackEnd Test: Sales Extraction and load, process chains
    u2022 Z_SALES_1
    u2022 all lis extractors:
    u2022 12_vcitm
    u2022 13_vditm
    u2022 11_vaitm
    u2022 11_vahdr
    u2022 11_v_ssl
    u2022 11_vasti
    u2022 12_vcscl
    u2022 selection of z-extractors
         Test:
    - Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
    - Delta extraction"
    "BackEnd Test: Financial Extraction and load, process chains
    u2022 0FI_GL_4
    u2022 NOTE: no further extractors are chosen for testing
    u2022 tbd     Test:
    - Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
    - Delta extraction"
    "BackEnd Test: Master Data... Extraction and load, process chains     Test:
    - Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
    - Delta extraction"
    "BackEnd Test: Zxxx Extraction and load, process chains
    u2022 Z_TRANSACTION_DATA
    u2022 Zxxx
    u2022 Zyyy     Test:
    - Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
    - Delta extraction"
    "BackEnd Test: Plant Maintenance Extraction and load, process chains     Test:
    - Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
    - Delta extraction"
    BackEnd Test: PP Extraction and load, process chains     Test: load from Zxxx
    "BackEnd Test: Purchasing Extraction and load, process chains     Test:
    - Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
    - Delta extraction"
    "BackEnd Test: APO Extraction and load, process chains
    u2022 ZAPOxxx
    u2022 ZAPOyyy
    u2022 others can be tested, but were not included in de testset     Test:
    - Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
    - Delta extraction"
    BackEnd Test: Regular Schedule - Production    
    BackEnd Test: Flat file upload     Test: 2 types from server and PC
    BackEnd Test: Test Admin Workbench: creation of objects, change existing     Test the Admin Workbench: creation of infoobjects, change infoobject, create/change hierarchy, create cube,u2026
    BackEnd Test: Test Bex: creation of queries (kf etc...); change existing     Creation of new query/ change query, create condition, calculated/restricted kf, variables,..
    BackEnd Test: Issue handling    
    Development box issue fixing - on forehand     apply fixes based on issues BWQ
    FrontEnd Test: Run Logistics Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
    FrontEnd Test: Run Sales Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
    FrontEnd Test: Run Supply Chain Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
    FrontEnd Test: Run Financial Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
    FrontEnd Test: Run Controling Reports     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
    FrontEnd Test: Run Master Data and Special Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
    FrontEnd Test: Run PM Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
    FrontEnd Test: Run Purchasing Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
    FrontEnd Test: Run APO Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
    FrontEnd Test: Issue handling    
    FrontEnd Test: Make before image of reports - Production     Run reports; save of before image to compare once upgraded
    FrontEnd Test: Run All Reports - Production     Run reports, execute various navigation steps, compare with 'before image' taken in prevous step
    Test Security     Test security with various end-user roles/IDS other than BW developer (usually has * ALL)
    Test Portal integration     Test portal with various end-user roles/IDS other than BW developer (usually has * ALL)
    Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
    Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
    Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM
    Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM

Maybe you are looking for