After migration the MaxDB 7.6 down the performance after some hours of use

Hi,
After many tests i put the version of MaxDB 7.6 in production, after some hours of use, now i'm getting a strange slow down in performance of the database, looking at the knldiag file i cant find anything that can show me the reason.
any idea how to check what happen?
thanks
Clóvis

Hi, Oksana,
I think that notes are only for SAP customers, right? because i'm not a SAP customer, there is a way to you be more specific about what i need to check without having access to that notes?
look on wrk directory i discover that the files QUAL.dmp and comseg.dmp are updated when the system get slow, i checked the knldiag but dont have any error,
any idea because these files are generated?
best regards
Clovis

Similar Messages

Why all the errors appear after some hours on pc

Why all the errors appear after some hours on pc

Thanks for reply but the 2 HDD oki think the PS is 200 W that made that problem ?Or from TEMP ? i made it more able to flow the air & become better now

I have a mid 2009 13'' MBP. I got the battery replaced in Apple store, It then stopped displaying the battery status LED. After some months of use my MBP died. I got it checked in Apple verfied Service centre and was told that logic board was to blame

I have a mid 2009 13'' MBP. I got the battery replaced in Apple store, It then stopped displaying the battery status LED.
After some months of use my MBP died outside USA. I got it checked in Apple verfied Service centre and was told that logic board was faulty.
After I came back to US I took my MBP to Apple store and was told that there is liquid damage in the system. My question is that if there was liquid damage why did my MBP stop displaying the battery status right after the battery was changed secondly why didnt the apple verified Service centre tell me that there was liquid damage afterall I paid them the money for diagnosing the problem.
Is there a process i can followup on this problem

These are question you would need to ask that service center.
This is a User to User forum. No Apple employees here.

Firefox automatically crashes after 4 hours of use and only when a textbox is being used - problem now daily and getting worse

This has been going on for a few weeks and started of it's own accord. I have not recently installed any new plugins or scripts, and my PC is protected by two antivirus products and so my system (WinXP) is malware free.
I can browse firefox for up to 4 hours, and then it crashes. No matter what sites I am using, what I am doing or even if I'm at the PC... so long as there's a text box on the page then firefox will crash if the 4 hour time limit expires. I can be just about to save an hours worth of photo captions and lose all that work due to the crash, or can be in the middle of a background download but it'll still crash... daily.
I thought this was a plugin issue, as I have disabled all plugins for javascript handling, flashgot, etc, but still it crashes. (previously on startup Firefox would hang for 5 to 10 minutes and the system would "bing" at me if I tried to click on the firefox window... eventually a 'non responsive script' window would appear relating to a flashgot script). The crash used to go whereby suddenly the page would freeze for a few seconds, followed by a minute or two of safe working, then 2 minutes of freeze and 30 seconds of safe working, with the ratio of freeze-tim:working time working in 20 seconds increments until firefox crashed... now though there is no warning, the page freezes and then it's gone. I have updated firefox several times and still the problem persists. On a previous computer, Firefox degraded to the point where it froze for 4 minutes on any page with a Flash application... now on this computer it has degraded by itself to the point where it crashes after 4 hours of use.
I'm presently using Internet Explorer to type this question because firefox crashed again and I'm not going to sit waiting for it to reload just to get a few numbers from an information screen... therefore further info like crash ID's etc will be update in due time....

Cool, I'll try using the wall adaptor just as soon as I get a convertor for it to convert it to our socket type. It's nice to hear that someone else has experienced the same issue.
I am not using it as a phone in Australia, just the ipod and wifi.

Lenovo Flex 10 touchscreen stops working after 1 hour of use.

Just bought a new Lenovo Flex 10 from a retail and it works perfectly except that after an hour of use the touchscreen stops working, the computer still works ok, but only with the mousepad. The notebook came with Windows 8.1, and I haven't installed any program on it. I need an urgent response please, since i've been looking for days in the community and other support pages, and still can't get a satisfactory answer and the period to get the a refund are about to expire.
Thanks in advance.

hi riglesias,
Welcome to the Lenovo Forums.
Once the Touchscreen stops responding, can you check the following:
1. Open System Properties and see if the Touch functionality is still there
- Link to picture (Touchscreen feature is not detected)
- Link to picture (Touchscreen feature is detected)
If the Touchscreen feature is detected, proceed to Step 2.
2. Press the Windows key‌ +R, type devmgmt.msc and press Enter. On the Device Manager, navigate to the Human Interface Devices section and uninstall anything that says HID-compliant device (this is the driver that controls the touchscreen). When finished, reboot the system and observe.
3. If the Touchscreen is still not working, hold the Shift Key and hit the restart button inside Windows and you should be able to see the image below then try to tap on the screen to test and observe. I
If the touch capability is still not functioning, I recommend you contact lenovo for service.
- Link to picture
- Support phone list
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Printer loses wireless connection after some hours

Hello to all!
Printer is connected and I can see on the screen correct IP. Desktops with Win7 and Ubuntu are used. After switching on printer works properly, but several hours later its unreachable from both systems. Printer shows connection, I can see it in router web access tool, but it is unreachable. I have to switch off printer, reboot the router, then switch on printer - and it works. Not very comfort.
Does anybody know how to fix this bug?
This question was solved.
View Solution.

Hi @varspb,
Welcome to the HP Forums!
I noticed that your HP Deskjet Ink Advantage 6525 printer is losing wireless connection after some hours with Windows 7 and Ubuntu. I am happy to look into this connection issue for you!
For Linux support, please take a look at this website, http://hplip.sourceforge.net/.
Otherwise, please see the following guides:
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
HP Deskjet Ink Advantage 6520 e-All-in-One and HP Photosmart 6520 e-All-in-One Printer Series - Prin....
Tips for preventing wireless connection issues
The following tips can help prevent wireless connection issues:
Move the printer and the computer or access point (router) closer together.
Remove any metal objects between the printer and the computer or access point (router). Objects such as refrigerators or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals farther away from the printer. Devices such as microwaves and cordless telephones can interfere with wireless transmission.
Consult the router manufacturer for updates and configuration of your router.
Make sure that your computer is not connected through a VPN. You cannot access your printer on your wireless network while connected to a VPN.
Also, please take a look at this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this helps, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Why did my iMac fan come on very noisy after 1 hour of use ? I had to turn it off to stop it

Why did my iMac fan come on very noisy after 1 hour of use ? I had to turn it off to stop it

Just updated details - os x 10.8.5 .....
found an answer that could have been problem with CPU and a runaway application (possibly Bin Weevils) which my son was running at the time. I shall check the activity monitor next time to see what percentage cpu is being used..
http://support.apple.com/kb/TS1473
thanks for response

Toshiba 40L7335D turns off by itself after several hours of use

My Toshiba TV 40L7335D periodically turns off by itself!!!!
Bought a few days, everything else is working perfectly during the day but after several hours of use of the TV is turned off!
Is a problem that someone else has or knows??

Please check the user manual *page 74*
http://www.toshiba-om.net/LCD/PDF/English/L7335-4050-English.pdf
_Energy Saving Settings_
+The TV will automatically turn itself off (Standby) after 4 hours, if you do not operate the TV either from the remote control or the TV control panel.+
and
_No Signal Power Down_
+The TV will automatically turn itself off after 15 minutes when no signal is detected+

Safari freezes after several hours of use on Macbook pro

I just bought a Macbook Pro. When using safari, it freezes at least once a day to a point I can't force quit, and had to do a hard shut down. I've figured out that if I am using my computer and safari for more than a couple of hours, Safari just freezes. An apple support representative did mention that laptops were not meant to be constantly on, so I have been shutting it down when not in use. Still, I shouldn't have to shut down after an hour just to keep Safari from freezing.
Does this sound normal? Is there an easy fix? Do I need to look at getting this computer replaced? Or should I download a better web browser?
I'm also new to Mac, and thought switching from a windows would mean better reliability. So far I have been unimpressed with my computer. I just want it to work without worrying about having to force it to shut down once a day. Thanks for your help!

Does this sound normal?
No, of course not.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Crash of LabVIEW executeable after some hours

Hi to all,
I'm developing a LabVIEW program for a long term monitoring
application of serial (RS232) devices. On the target system the
program runs as executable. At start-up everything runs fine. After
several hours (usually 1..3) the application crashes with an access
violation. I did a lot of "debugging" on executable level, because the
error seems not to occur in the development environment. I found out,
that the fault has nothing to do with the serial communication,
because it occurs also in a "demo mode", where no communication with
devices is performed. I studied the Dr.Watson log files and found out,
that the fault occurs always at the same code position. (See below for
details.) The fault occurs under LabVIEW 6.0, 6.0.2 and also 6.1,
(resp. the according runtime). At the moment The Dr.Watson log
suggests, that the LabVIEW internal function "CancelOnOccur" performs
a jump to address 0x00000000, what of course will cause a GPF. The
symbol for this function can be found in the runtime DLL's as well as
the LabVIEW.exe. The development system and the target are Win2k
machines with all available patches/updates including SP4. Here are
some interesting parts from the Dr.Watson Log (sorry its in german):
Anwendungsausnahme aufgetreten:
Anwendung: (pid=832)
Wann: 27.03.2004 @ 12:02:28.522
Ausnahmenummer: c0000005 (Zugriffsverletzung)
*----> Systeminformationen <----*
Computername: - removed for privacy -
Benutzername: - removed for privacy -
Prozessoranzahl: 1
Prozessortyp: x86 Family 6 Model 8 Stepping 6
Windows 2000-Version: 5.0
Aktuelles Build: 2195
Service Pack: 4
Aktueller Typ: Uniprocessor Free
Firma: - removed for privacy -
Besitzer: - removed for privacy -
Statusabbild f�r Threadkennung 0x4a0
eax=00ca6830 ebx=00000003 ecx=00014988 edx=00ca6830 esi=00000000
edi=f1d00001
eip=00000000 esp=01fcff14 ebp=01fcff30 iopl=0 nv up ei ng nz
ac po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000
efl=00000296
Funktion:
FEHLER ->00000000 ???
00000001 ???
00000002 ???
00000003 ???
*----> Stack Back Trace <----*
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
01FCFF10 3023F32E F1D00001 00000001 00D30368 00000000 !
01FCFF30 300797D2 7FB84F88 7FE5AEA8 00000001 7FEC01B8 !CancelOnOccur
01FCFF50 300C5AAC 7FE5B0D8 00000001 7FEC01B8 00000001 !GetSetLVInfo
01FCFF88 30075DEE 7FEC01B8 00000001 77E9BFF2 00CC0DF8 !ImaqReturnIDs
01FCFFA0 3026E759 7FEC01B8 30352068 0012E0EC 01FCFFEC !ConfigExec
01FCFFB4 77E7B382 00CC0DF8 30352068 0012E0EC 00CC0DF8 !GetTextRect
01FCFFEC 00000000 3026E730 00CC0DF8 00000000 00505A4D
kernel32!lstrcmpiW
*----> Raw Stack Dump <----*
01fcff14 2e f3 23 30 01 00 d0 f1 - 01 00 00 00 68 03 d3 00
...#0........h...
01fcff24 00 00 00 00 30 68 ca 00 - 88 67 93 7f 50 ff fc 01
.....0h...g..P...
01fcff34 d2 97 07 30 88 4f b8 7f - a8 ae e5 7f 01 00 00 00
....0.O..........
01fcff44 b8 01 ec 7f 00 00 00 00 - 01 00 00 00 88 ff fc 01
01fcff54 ac 5a 0c 30 d8 b0 e5 7f - 01 00 00 00 b8 01 ec 7f
..Z.0............
01fcff64 01 00 00 00 b8 01 ec 7f - f8 0d cc 00 10 2d cb 7f
01fcff74 94 3d c4 7f 00 00 00 00 - 00 00 00 00 00 00 00 00
..=..............
01fcff84 00 00 00 00 a0 ff fc 01 - ee 5d 07 30 b8 01 ec 7f
..........].0....
01fcff94 01 00 00 00 f2 bf e9 77 - f8 0d cc 00 b4 ff fc 01
........w........
01fcffa4 59 e7 26 30 b8 01 ec 7f - 68 20 35 30 ec e0 12 00 Y.&0....h
50....
01fcffb4 ec ff fc 01 82 b3 e7 77 - f8 0d cc 00 68 20 35 30
........w....h 50
01fcffc4 ec e0 12 00 f8 0d cc 00 - 00 80 fd 7f 05 00 00 c0
01fcffd4 c0 ff fc 01 60 fb fc 01 - ff ff ff ff b4 1b ec 77
.....`..........w
01fcffe4 f0 2a e7 77 00 00 00 00 - 00 00 00 00 00 00 00 00
..*.w............
01fcfff4 30 e7 26 30 f8 0d cc 00 - 00 00 00 00 4d 5a 50 00
0.&0........MZP.
01fd0004 02 00 00 00 04 00 0f 00 - ff ff 00 00 b8 00 00 00
01fd0014 00 00 00 00 40 00 1a 00 - 00 00 00 00 00 00 00 00
01fd0024 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
01fd0034 00 00 00 00 00 00 00 00 - 00 01 00 00 ba 10 00 0e
01fd0044 1f b4 09 cd 21 b8 01 4c - cd 21 90 90 54 68 69 73
.....!..L.!..This
Any ideas fromm other users?
Is there someone at NI who can support this issue?
If there is more information needed, I can provide it.
Thanks in advance!
Best Regards

Thanks for your comments.
NI germany has offerd me to get a test version of LabVIEW 7.0
(including application builder). This will be my next try. As I
mentioned in the posting before, I already do testing with the
executable with multithreading disabled (ESys.StdNParallel=0). At the
moment the system runs in this configuration for about 24 hours, but
its to early to say "I've got it!". Anyway, most of the application is
straight LabVIEW. There are some minor calls to DLL's, but these have
been prooven in other applications over years. I don't use ActiveX
controls. So my opinion still is, that the problem is related to
LabVIEW (runtime) itself. And additionally it can't be a solution for
the future to disable multithreading to get a stable application
. And
at the end, that the crash always occurs at the same LabVIEW internal
code position is an indicator for me, that my opinion can't be so
wrong. Is'nt there anybody in Austin who can take a look at source
code of the internal function "CancelOnOccur" to help tracking down
the problem. I hope that NI is interested in increasing its products
quality...

Randomly displays "Connect to itunes" after several hours of use.

Just bought this new 16GB 3GS iphone from a friend which is only one month old. He recieved it as a replacement from apple which worked fine for him. After inserting my sim card and restoring from backup apps and settings of my 2G, after about 5 hours of use it randomly displayed "Connec to itunes" screen. Connected to itunes and said it could not read contents of phone and to restore.
Restored iphone and setup new device this time and redid everything from scratch. Worked for about 5-7 hours this time and then did the same thing. Did another low level format and restore of the phone and this time it lasted 10 hours and displayed the same thing.
Anyone have any ideas of whats going on here? Did the restore from backup of my 2G cause something to be screwed up?
Thanks for the responses in advance!

Ok I've uninstalled everything relating to iTunes and apple from my winXP netbook and reinstalled iTunes with updated 9.2.1 and then updated the 3GS to 4.0.1
We'll see if the new iTunes update fixed 4.0 upgrade issues which claims it has and see if my phone lasts longer than 10 hours this time.

Mac resets after 1 hour when using ATV

When viewing a movie that is on my Mac via my ATV the Mac resets after 1 hour and I have to physically log in again to continue.
ATV is ethernet connected via a D-Link switch.

Exactly, it only logs out when I use the ATV and It is always 1 hour.
The ATV is connected via ethernet through a D-Link DIR-655 switch so I am wondering if it could be something in the switch settings, (multicast streams?)

Iphone 4 IOS 6.1 After Some Hours Showing On Screen ( No Service ) :( Please Tell me The Sulotion

PLs Help Me

This usually happens if the phone has been Hacked / Jailbroken / Modified...
If this is the case... Then...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.

Macbook shuts down unexpectedly after an hour of use

I've had my MacBook since 2006, and I've had some minor problems now and then.
But since few days ago, my mac shuts down unexpectedly after I use it for about an hour.
at first I thought that maybe it's the fan, cause I've never cleaned the fan since the day I've bought it and my mac gets pretty hot after a while. but it used to work just fine when it got even hotter.
now I'm guessing maybe it's the battery? I've also never replaced the battery to a new one, cause I've almost always used power adapter instead of using battery alone. but I think I've heard it somewhere that the battery still dies even when you only use power adapter. is this true?
I usually just turn mac right back on when it shuts down, and it goes well for about 30 mins and then it shuts down again.
could anyone please be kind enough to tell me if it is the battery that's causing this such a frustrating problem? I don't know if this would help figure out the problem, but this is what battery info says,
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 3674
Remaining Capacity (mAh): 3648
Amperage (mA): 0
Voltage (mV): 12443
Cycle Count: 105

Thank you so much for answering! I've actually read your answer to other similar forum, and have just installed iStatPro. it says that my fan is "exhaust" and at 0rpm. do i HAVE to replace the fan to a new one? can I just open up my mac and clean out the fan? if so, would you recommend this instead of buying a new fan? one last thing, if I buy a new fan, is it easy for me to replace it by myself? again, thank you so much for your answer.

Tdm slow down program after some hours

hello

hi Gibbi
What version of labview are you using?
In labVIEW 8.2 the TDM's files are improved with TDMs(http://zone.ni.com/reference/en-XX/help/371361B-01/lvhowto/ni_test_data_exchange/) wich are VIs that improved this behavior.
In the case you are using labview 8.20 here is a link where you can learn how to change the format of your tdm to tdms
http://zone.ni.com/reference/en-XX/help/371361B-01/glang/tdm_to_tdms/
In case you are not using LV 8.2 I need a little more information about your code in order to help you.
How many channels are you reading?
try to program TDM 's readings by channel groups not just channels
this arquitecture sometimes releases some resources of your computer
Also you can program a more efficient reading method to avoid the lattency.
If you need something else please post more info about your system.
Thanks for using National Instruments products
Erwin Franz R.

After migration the MaxDB 7.6 down the performance after some hours of use

Similar Messages

Maybe you are looking for