After months of using FaceTime now says failed why?

hi using facetime successfully for several months !! now will not work WHY???

Is your problem with FT on an iPad or Mac?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

Similar Messages

  • PSE 11 suddenly required re-activation after months of use, but now code doesn't work?

    The PSE 11 won't accept the given activation code, despite my having installed, activated and using it for about 6 months. I need my activation code to activate PSE. What's the **** is happening?

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • My iphone4 now has message activate your phone after months of use.  Any suggestions?

    Hi.  My iphone4 now has message activate your phone after months of use.  Any suggestions?  I don't want to lose anything on my sim preferably.

    The iTunes Store has never officially been available from the Channel Islands, which though a crown dependency are not (as far as the record companies are concerned, and they are the driving force behind these restrictions) part of the UK. The terms of use for the iTunes Store say that access to the UK iTunes Store from outside its country isn't allowed and it's possible that Apple is now enforcing that by technical means.
    Sorry, but you're probably stuck at this point.

  • After updating to Mavericks, FaceTime will say it's connecting and then fail. I can't connect with my family in the US dialling from UK.

    After updating to Mavericks, FaceTime will say it's connecting and then fail. I can't connect with my family in the US dialling from UK. Any tips on how to fix much appreciated!

    From the Mail menu bar, select
    Window ▹ Connection Doctor
    Click the Show Detail button. A drawer opens. Try to send a message and post the text that appears. Anonymize any personal information before posting.

  • CS6 Master Collection asking for password after months of use

    Why is CS6 now asking for a password again after months of use?  I have already entered a valid passwork upon installation.  I am running Mountain Lion on a 15" Macbook Pro.  I launch Photoshop, and then I get this screen
    But I already have a password and have installed CS6 six months ago.  Even when I enter the password, it does not stick and I et this dialog box on every launch.

    Tom,
    Can you provide the AMT3.log for a look , it may help us in knowing the problem.
    you can find the file at the below location:-
    \Users\[username]\AppData\Local\Temp
    Also please move the cache.db file to the desktop then launch the software, serialize it with the serial number and then close it and Re-open it.
    The location for cache.db file is : Library/Application Support/Adobe/Adobe PCD/cache

  • My Philips tv lost Connection to Apple TV 1. Generation After months of no problems: tv says no Videosignal found. Appletv Shows a yellow Blinksignal light on the Front??

    Hi all,
    My Philips tv lost Connection to Apple TV 1. Generation After months of no problems: tv says no Videosignal found. Appletv Shows a yellow Blinksignal light on the Front??
    Can anybody help?
    Tranks
    Rob

    Welcome to the Apple Community.
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    If this doesn't help then I suspect your Apple TV has failed.

  • When I go to use facetime, it says an error occurred during activation. Try again. How can I fix this issue?

    When I go to use facetime, it says an error occurred during activation. What am I missing?  Any suggestions on how to fix this?

    You can try here:
    Can't Activate FaceTime
    However, I suspect an Apple server problem. Many users have been reporting problems with Messages and Facetime today.

  • After working correctly before Firefox now says that I don't have the propper permission to have the automatic upgrade process. New iMac and MacBook Pro both afected. Using Snow Leopard

    After working correctly since I started using the iMac Firefox now say that I do not have the privileges to have it auto update the Firefox. I don't think I changed anything.
    == This happened ==
    A few times a week
    == Since last update

    Well, running on a 2006 model.  I did not have a startup disc.  Initially, it booted up on original software in 2006.  Since then, I've upgraded to 10.6 via a box set.  And, since then I think I popped it up to lion. 
    All I have on a disc is snow leopard.  And, I can't get farther than the setup screen due to hard drive.  I'm taking to a apple authorized repair store right now.  We'll see what they tell me .  I'm just going to weigh the cost of repair vs. buying new.
    Another bad, stupid thing is I had no means of backing up my stuff.  So, I might have lost things like music, vids, etc.  we'll see if they can recover.  If the cost is too much for repair I might just forget it and start over with a new system.  Just not sure at this point.

  • Everytime i try to call using facetime, it says it might be a phising website, no idea what is this, this never happened before, is it possible that my ipad mini could havebeen hacked. Please help

    I have been using facetime for past two months and everything was working fine, but yeaterday when i tried calling someone using facetime the a meesage appeared which said " warning this might be a phishing website" then two options are give either to ignore or go back.
    I don't know what to do, can somebody please help me , is it possible that my ipad mini is hacked

    Thanx Allan for that info,but still why does this message appears every time i call someone using Facetime
    Thank you
    Munish

  • Firefox is saying it is configured to use a proxy server that is refusing connections and won't allow me access after months of using it. Uninstalling and reinstalling has had no effect. Help!

    Recently McAfee recommended I block 'roaming.dwm.exe' which I did. Could that have caused the problem? Since then I have swapped to AVG which found 3 Trojans and removed them, but I still cannot access Firefox. I have checked my Internet Connections settings and nothing is entered there.

    Tools -> Options -> Advanced -> Network -> Connection
    Try selecting the "No Proxy" setting. If it doesn't work, select "Use System Settings". If this still doesn't solve the problem, leave the setting at "Use System Settings", then check your connection's settings (in Windows, not FF).

  • IPad Air 32GB Wifi model, won't turn on, recover, restore, with error 4005 after trying to use facetime, switched off. :( HELP!

    bought my mom a new iPad Air 32GB WiFi model via eBay and got it yesterday. It worked all fine and I even updated it to the latest iOS version. It worked all fine for the next few hours until I tried to have a facetime call using my iPad Air. Somehow within few seconds after the call being initialized, my moms iPad got switched off. I tried almost all the solutions I found via Apple community, google and other sites. None of them worked. ( Restore, Recovery, DFU Mode, Pressing Home and ON/OFF switch etc ) Somehow I managed to connect the iPad to itunes and when i press the restore button, I get error 4005 after 5 - 10 mins appearing 'waiting for iPad' message. I am in Sri Lanka and I have no Apple Stores here, or authorized service providers. since this isn't a fault of the ebay seller, cannot return it too. Please help me!

    Hi Tom,
    Thank you very much for your time and trying to help me on this issue. I really appreciate it.
    I went through those steps more than few time since yesterday ( saw you had posted this solution on a similar issue by another user )
    still no luck. Now I cannot exit from DFU mode, or either restore it due to 4005 error. ( since its a new iPad, i only had few apps installed. so not going to loose much data as well ). I also try to exit DFU mode by using few third party apps such as Wondershare Dr.Fone, Phone Rescue, ReiBoot, RecBoot. Only wondershare Dr.Fone app showed me a screen with a message saying the iOS device is 'not in normale mode, press home + off/on button to switch to normal mode, which never worked either.
    Really appreciate your help but I am open for more solutions other than Restore, Recovery Mode, DFU mode or any method to overcome error 4005. I would also like to know are there any softwares to diagnose the iPad Air to detect whats wrong with it. so that I can be sure if it is a hardware failure or firmware issue.
    Thanks in advance,
    Nimasha

  • Blutooth disconnect when using Skype, now completely fails to reconnect

    I have been experiencing the following problem when accepting or placing a video call through Skype. This never happens when running any other software. My system is an ideaCentre B520 with the stock Bluetooth keyboard and mouse using a Broadcom BCM2070 device running firmware 6.5.1.2700 and a Microsoft Bluetooth Enumerator with firmware 6.1.7601.17889.
    The Bluetooth mouse and keyboard disconnect during the call and will not pair or connect wit the computer (IdeaCentre B520). The only solution that I have found work, is to remove both devices from the device manager and reconnect with the physical Bluetooth buttons on the computer and the devices. I also un- and reinstalled Skype, but the problem continues, which might be a software issue.
    However, today the computer completely failed to pair and connect with the devices. The pairing dialogue is displayed after pushing the Bluetooth button on the computer. I am prompted to press the corresponding buttons on the mouse and the keyboard and the dialogue completes (code number for keyboard is entered) with the message that the pairing was successful, but drivers may need to be updated. The new drivers are installed for the HDI devices as indicated by the bubble and the grey Bluetooth window light the devices as connected. The Bluetooth box will then go into a repeated flickering between connected and disconnected until both devices are deleted from the device manager terminal. Both devices continue to blink as if searching for the receiver.
    I had to switch over to a wired mouse and keyboard to type these lines. But this defies the purpose.
    I sincerely appreciate any suggestion you might have to solve this problem and get the devices to talk to one another again.
    Thanks in advance.
    hailaender

    You use wrong bluetooth software. The only one that should work is 6.4.0.2100. You can download it from Sony website. I know it may sound strange but I have tested them all. Give it a shot and see what happens.

  • HT4623 my ipad wont restore after trying to upgrade software, now says Unexpected error (3) ....?

    After trying to update software on my ipad it now will attempt to restore but gets to the end and says unexpected error (3)?? any ideas how i can solve this?

    the 3 is in brackets (3)? Before that it says unexpected error has occured...
    I cant remember what version we were on before updating.
    I have just purshased a new computer and down loaded the latest version of itunes and still have the same problem...
    My iphone updated fine...

  • Error 0x80070035 only on one of 20 remote machines, after months of use... strange!

    I have been using a Windows 7 Server on my network for Quickbook for 2 years without a hitch.  Since the weekend I started getting error code 0x80070035 'network path was not found' for the server only.  I can see the server on my mapped network,
    I can see my computer from the server, I can open every remote computer on the network except the server.  My admin team  still can access the Quickbooks Server.  I can open the server from every other computer on the network... just not mine.
    I have tried system restore, no luck.  I've turned off TCP/IPv6 with no success. I've checked for multiple 6to4 adapters, none.  Again, my network works perfectly on every remote unit, from all work stations except for me
    now connecting to the Quickbooks server.
    I'm sure this is a strange occurrence with a simple solution... I just can't figure it out with all the posts I've read....  suggestions?

    Hi,
    The error code 0x80070035 can be caused by multiple reasons, it would be better to capture a network trace to identify this problem. You can try to use Network Monitor for test.
    Network Monitor:
    http://www.microsoft.com/en-in/download/details.aspx?id=4865
    On the other hand, this problem probably caused by network proble, you can refer to the contents of the link below to make a troubleshoot with network:
    How to Troubleshoot Basic TCP/IP Problems:
    http://support.microsoft.com/kb/169790
    Roger Lu
    TechNet Community Support

  • Curtain of death after months of use

    Hi folks hope all is well . After several months wit the Mac pro i am STILL getting these curtains of death and it is really getting to me. I am very reluctant to start all over and reformat this thing. If i do than i will wait for leopard than do it but in the meantime there must be a way to solve this issue. One thought is it is trying to connect with Idisk which is not on my desktop anymore but in my preferences but here is the latest console crash report. I have Tech tools Pro and also Tiger cache cleaner. Just wondering if there is a program to find the issue and solve it. Not sure how to read this crash. Here it is
    Mac OS X Version 10.4.8 (Build 8L2127)
    2007-01-30 08:13:16 -0700
    2007-01-30 08:13:16.806 loginwindow[119] FSResolveAliasWithMountFlags returned err = -43
    2007-01-30 08:13:17.316 SystemUIServer[136] lang is:en
    Waiting for prefs changes...
    DSGetCurrentConfigInfo(): dsGetRecordEntry() == -14079
    Jan 30 08:13:33 guy-mancusos-computer-2 /System/Library/CoreServices/mcxd.app/Contents/MacOS/mcxd: DSGetCurrentConfigInfo(): dsGetRecordEntry() == -14079
    DSGetCacheInfo(): DSGetCurrentConfigInfo() == -14079
    * MCXD.getComputerInfo: Couldn't get cache info -14079
    Jan 30 08:13:33 guy-mancusos-computer-2 /System/Library/CoreServices/mcxd.app/Contents/MacOS/mcxd: DSGetCacheInfo(): DSGetCurrentConfigInfo() == -14079
    Jan 30 08:13:33 guy-mancusos-computer-2 /System/Library/CoreServices/mcxd.app/Contents/MacOS/mcxd: * MCXD.getComputerInfo: Couldn't get cache info -14079

    Here is the panic log for today
    Tue Jan 30 08:13:24 2007
    panic(cpu 0 caller 0x5A947CD0): Uncorrectable Fbd memory error detected. ferr = 20000800 , nerr == 00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x108cd8 : 0x128d1f (0x3c9540 0x108cfc 0x131df4 0x0)
    0x108d18 : 0x5a947cd0 (0x5a949e64 0x20000800 0x0 0x8100a4)
    0x108da8 : 0x5a947f64 (0x927ab00 0x927ab00 0x2 0x820044)
    0x108e38 : 0x5aa54712 (0x927ab00 0x0 0x916cc80 0x0)
    0x108e68 : 0x5aa5459b (0x9134700 0x0 0x0 0x1c)
    0x108e88 : 0x5aa6731c (0x1c 0x108ef8 0x8 0x5aa68dd9)
    0x108eb8 : 0x5aa674c6 (0x913711c 0x17 0x91345ca 0x904c520)
    0x108f18 : 0x5aa7405d (0x91087e8 0x0 0x108f48 0x3974d9)
    0x108f38 : 0x5acae4fb (0x91087e8 0x0 0x8f5ac80 0x0)
    0x108f68 : 0x5aa5a7c5 (0x901b200 0x0 0x901c500 0x49)
    0x108f88 : 0x5aa53c1f (0x8f88a00 0x0 0x901c500 0x49)
    0x108fa8 : 0x3b9d21 (0x9111580 0x0 0x9111700 0x49)
    0x108fe8 : 0x19aa20 (0x4a94be30 0x4a94be30 0x19ba76 0x57c000)
    0x4a94bf18 : 0x1a42f5 (0x10 0x1 0x4ae85c 0x6)
    0x4a94bf38 : 0x19d871 (0x0 0x0 0x4a94bf68 0x206)
    0x4a94bf58 : 0x135f23 (0x0 0x0 0x0 0x19d23a) Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleMCEDriver(1.1f1)@0x5a944000
    dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x5a9ff000
    com.apple.driver.AppleAPIC(1.2.0)@0x5acad000
    com.apple.driver.AppleACPIPlatform(1.0.5)@0x5aa52000
    dependency: com.apple.iokit.IOPCIFamily(2.1)@0x5a9e9000
    dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x5a9ff000
    Kernel version:
    Darwin Kernel Version 8.8.1: Mon Sep 25 19:42:00 PDT 2006; root:xnu-792.13.8.obj~1/RELEASE_I386
    Tue Jan 30 15:43:30 2007
    panic(cpu 0 caller 0x5AAB6CD0): Uncorrectable Fbd memory error detected. ferr = 20000800 , nerr == 00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x108cd8 : 0x128d1f (0x3c9540 0x108cfc 0x131df4 0x0)
    0x108d18 : 0x5aab6cd0 (0x5aab8e64 0x20000800 0x0 0x8100a4)
    0x108da8 : 0x5aab6f64 (0x9264200 0x9264200 0x2 0x820044)
    0x108e38 : 0x5aa54712 (0x9264200 0x0 0x916cc80 0x0)
    0x108e68 : 0x5aa5459b (0x9134700 0x0 0x0 0x1c)
    0x108e88 : 0x5aa6731c (0x1c 0x108ef8 0x8 0x5aa68dd9)
    0x108eb8 : 0x5aa674c6 (0x913711c 0x17 0x91345ca 0x904c520)
    0x108f18 : 0x5aa7405d (0x91087e8 0x0 0xb102fff4 0x259)
    0x108f38 : 0x5acae4fb (0x91087e8 0x0 0x8f5ac80 0x0)
    0x108f68 : 0x5aa5a7c5 (0x901b200 0x0 0x901c500 0x49)
    0x108f88 : 0x5aa53c1f (0x8f88a00 0x0 0x901c500 0x49)
    0x108fa8 : 0x3b9d21 (0x9111580 0x0 0x9111700 0x49)
    0x108fe8 : 0x19aa20 (0x4a813d00 0x4a813d00 0x19ba76 0x57c000)
    0x4a813d98 : 0x120094 (0x1 0x1dcd6500 0x4a813dc8 0x1a1ec0)
    0x4a813df8 : 0x125b6a (0x9fd0414 0x3000106 0x450 0x0)
    0x4a813f08 : 0x1955a1 (0x4a813f44 0x0 0x0 0x0) Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleMCEDriver(1.1f1)@0x5aab3000
    dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x5a9ff000
    com.apple.driver.AppleAPIC(1.2.0)@0x5acad000
    com.apple.driver.AppleACPIPlatform(1.0.5)@0x5aa52000
    dependency: com.apple.iokit.IOPCIFamily(2.1)@0x5a9e9000
    dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x5a9ff000
    Kernel version:
    Darwin Kernel Version 8.8.1: Mon Sep 25 19:42:00 PDT 2006; root:xnu-792.13.8.obj~1/RELEASE_I386

Maybe you are looking for