After Mountain Lion update - problems synching contacts and accessing previous Time Machine backup

I have just set up a MacBoook Pro with a new SSD drive to replace the internal hard drive. I made sure I had a current Time Machine then connected the SSD drive externally and installed Mountain Lion. I installed the SSD drive into the computer. Before restoring applications from the Time Machine backup, I enabled the root user, logged on as that and deleted all other accounts as I have previously had issues with creating a new account from a backup and making that the 'home' user.
All went well except that a few seconds after I opened Contacts they all disappeared. They were replaced with two entries - one for Apple and one with the name of the home account.
I tried to retrieve Contacts from the Time Machine backup. I could see all the past dates but they were all red and inaccessible.
I looked at Contacts in my account at iCloud.com - they were the same 2 contacts as my local machine. I went through the installation process again but made sure that there was no connection to the Internet on completion. My contacts were intact. I exported them to a file and turned on the Internet. A few seconds later, my Contacts were gone..!
I imported from the backup I had made but, after a few seconds they were replaced with the two contacts from iCloud. Nothing I tried would allow me to add the contacts and have them synch to iCloud. I finally found a workaround:
1  disconnect from the Internet
2  import Contacts from the export file
3  select all contacts (ctrl-A) and drag them to the 'on my mac' account in Contacts
4  connect the Internet and watch all the contacts disappear from the iCloud account
5  select all contacts from the 'on my mac' account adn drag them to the iCloud account.
6  watch them synch to iCloud
I still don't understand the problem - perhaps someone can enlighten me - but here's the workaround if someone is having the same problem.
And I still can't access the Time Machine backup that I used to setup the MacBook Pro. Looking at the files within the Time Machine the backup. it looks as though it is probably a permissions issue but I don't see why as the account I am using is the same name as the one used to create the backup. Any guidance would be appreciated.
Jeff

I think you went about this the wrong way. ok....
Could you please try this... (1) Open Address Book - keep it as the main window.  (2) Enter Time Machine from the icon in the menu bar... do you have that icon? If not, Open System Preferences, Click Time Machine, put a check mark in Show Time Machine in Menu bar. Close System Preferences. Go back to your addressbook. Make it the primary application open. Now go to the icon in the menu bar that represents TimeMachine and click Enter Timemachine. You should see your stuff...
if you dont...
I would also try...
Open system preferenes. go to the icloud tab. sign out. then sign in.
jdxxs wrote:
I have just set up a MacBoook Pro with a new SSD drive to replace the internal hard drive. I made sure I had a current Time Machine then connected the SSD drive externally and installed Mountain Lion. I installed the SSD drive into the computer. Before restoring applications from the Time Machine backup, I enabled the root user, logged on as that and deleted all other accounts as I have previously had issues with creating a new account from a backup and making that the 'home' user.
All went well except that a few seconds after I opened Contacts they all disappeared. They were replaced with two entries - one for Apple and one with the name of the home account.
I tried to retrieve Contacts from the Time Machine backup. I could see all the past dates but they were all red and inaccessible.
I looked at Contacts in my account at iCloud.com - they were the same 2 contacts as my local machine. I went through the installation process again but made sure that there was no connection to the Internet on completion. My contacts were intact. I exported them to a file and turned on the Internet. A few seconds later, my Contacts were gone..!
I imported from the backup I had made but, after a few seconds they were replaced with the two contacts from iCloud. Nothing I tried would allow me to add the contacts and have them synch to iCloud. I finally found a workaround:
1  disconnect from the Internet
2  import Contacts from the export file
3  select all contacts (ctrl-A) and drag them to the 'on my mac' account in Contacts
4  connect the Internet and watch all the contacts disappear from the iCloud account
5  select all contacts from the 'on my mac' account adn drag them to the iCloud account.
6  watch them synch to iCloud
I still don't understand the problem - perhaps someone can enlighten me - but here's the workaround if someone is having the same problem.
And I still can't access the Time Machine backup that I used to setup the MacBook Pro. Looking at the files within the Time Machine the backup. it looks as though it is probably a permissions issue but I don't see why as the account I am using is the same name as the one used to create the backup. Any guidance would be appreciated.
Jeff

Similar Messages

  • Cannot install mountain lion keep getting "This disk is used for Time Machine backups" when trying to install, HELP!!!

    Ok i currently have Lion on my early 2011 15" MBP. When i try to install Mountain Lion to my mac HD it keeps telling me I cannot because its used for time machine backups. I have done a search and I know I have to delete the backups.backupdb folder but I cannot find it for the life of me. If anyone can help I would really appreciate, thanks!
    Nik

    If you double-click on your hard drive icon the Backups.backupd folder should be on the root level of your drive. Sometimes OS X gets confused and incorrectly puts a Backups.backupd folder on your hard drive. That folder should only appear on a drive used for Time Machine
    If you can't find the Backups.backupd folder try using the free EasyFind with both Package Contents and Invisible Files & Folders checked. Search for "Backups.backupd" without the quotes on your hard drive (default selection), not your Time Machine drive. Right-click on the search result and choose to Reveal in Finder. Click on the link that kisuke3 provided and follow those directions
    If you can't find a Backups.backupd folder anywhere try booting into Safe Mode by holding down the Shift key right after you hear the startup chime. Keep holding the Shift key down until you see the Apple Logo. The progress bar that appears indicates the progress of the file check that Safe Mode automatically does. Give it time to finish.
    Reboot normally and see if the ML installer will work. If it does wait until Spotlight is finishing indexing before turning Time Machine back on.

  • Why would upgrading from Lion to Mountain Lion more than double the size of my Time Machine backup?

    I have a 500GB Time Capsule that has 248 GB used. After upgrading from Lion to Mountain Lion, Time Machine reported that there was no longer enough room on the TC to complete the backup. Surely the new system files aren't taking up over 200GB? Does it somehow want to copy all of my user files again, even though the vast majority of those haven't changed since the previous backup?
    I'd like not to have to upgrade to a larger TC just because of a system upgrade.
    Thanks in advance.

    If it is working as expected, what do you need with the old backup?
    If you want to be able to go back to where you were prior to an upgrade, isolate that backup and don't use it again. As far as Time Machine can tell, the whole drive changed.
    The link I posted contains probably everything that anybody knows about Time Machine and how to manipulate it to work as you would like as opposed to how it was designed to work. There are FAQs to continue a backup as opposed to starting fresh, but I wouldn't recommend it for the reasons above. Pondini probably doesn't, either.
    If you are going to do a wholesale upgrade of the OS, I would create a bootable clone using something like Carbon Copy Cloner or Super Duper. A bootable clone on an external drive can have you back up and running instantly if the upgrade fails in any way. If the upgrade goes fine, store it away in case you find the current system isn't to your liking.

  • After Mountain Lion update, i can't access Facebook and Hotmail websites

    When I was with the OSX Lion, everything was fine.
    After Mountain Lion update, i can't open Facebook and Hotmail websites.
    I already reinstalled the Mountain Lion, but the error still happens. The only way to open these websites is with the private navigation.
    Please, help me.

    From your Safari menu bar (top of your screen) click Safari > Preferernces then select the Privacy tab.
    Click:  Remove All Website Data
    Quit then relaunch Safari to test.
    If you still have problems with Facebook, go to the Facebook page then click the downward facing arrow to the right of Home then click Account Settings.
    Select Security on the left then click Secure Browsing.
    Select the box next to: Browse Facebook on a secure connection (https) when possiblle then click Save Changes.

  • Speakers no longer work after Mountain Lion update.

    After my update of Mountain Lion my speakers in my macbook pro no longer work.  The speaker symbol is grey and the volume can't be moved.  Anyone else have this issue?

    Seems there is no real solution to this problem. If you have a time machine backup you can go back to 10.7.2.
    Since I did the clean install of 10.7.2, I don't have any audio problems. My MacBook Pro now runs smoothly. I guess I stick with 10.7.2 until 10.7.4 is released.
    You can also try some of these suggstions: https://discussions.apple.com/thread/3705456?start=15&tstart=0
    Hope you get your audio working.
    AJ

  • SD Card not showing after Mountain Lion Update

    This matter has been discussed for some time now in
    Apple Support Communities > Desktop Computers > iMac (Intel) > Discussions
    SD Card not showing after Mountain lion Update
    Since the update to Mountain Lion, the SD slot does not show up in Finder.
    Someone gave a fix using the killall in Terminal, and that worked only once.  I have not been able to get that fix to work again.
    The only saving grace for me is that my SD Card us is always from my Nikon camera, and Nikon ViewNX 2 software is able to see and read from the card.
    Killall may have worked partially in that I no longer get the error message telling me that I have removed the SD card improperly, and need to dismount it first.
    However, Finder still cannot see it.

    BrianForbesColgate wrote:
    Thanks, Barney ...
    Those are basics ... Been there, done that, first.
    Then you should hava posted all the troubleshooting you already accomplished.
    Does the card show up in System Information? Or is that another one of the "basics" you've already looked into?
    Does it show up in Disk Utility? If so, have you tried formatting it there to determine if it is a formatting problem?

  • I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

    I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
    ^^ that's the main problem. Here's the full history.
    I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
    Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • If i upgrade from 10.6.8 to Mountain Lion and do a Time-Machine-Backup, is it possible to restore my mac on Mountain Lion?

    If i upgrade from 10.6.8 to Mountain Lion and do a Time-Machine-Backup before, is it possible to restore my mac on Mountain Lion with this Backup made on Snow Leopard?
    Thx guyz

    You don't need to restore anything.
    Just upgrade.  That replaces Snow Leopard with Mountain Lion, without disturbing anything else.
    But by all means, always keep up-to-date backups, in case something goes wrong.

  • How do I reinstall Lion after having to revert to previous Time Machine Backup of Snow Leopard?

    After upgrading to Lion, had to revert to a Snow Leopard Time Machine backup in order to transition my Quicken data to a newer version of Quicken compatible with Lion.  Now not sure how to get back my upgrade.  Command-R during restart does not work, I'm sure because system is now running Snow Leopard.  App Store does not show my purchase.  Don't want to pay for Lion again.  Don't want to restore Lion Time Machine Backup as I will lose my new Quicken Essentials version and data file.

    If you are running Snow Leopard 10.6.6 or later open App Store and sign in with the same Apple ID you used to purchase Lion. Click on Purchases icon  in the toolbar. You should see an active Install button to the right of your original Lion purchase entry.

  • Lost login keychain; Lost previous time machine backups with Lion install

    I downloaded Lion and it would not install on my 2.66 GHz Intel Core 2 Duo 4 gb 1067 mhz ddr3 Mid-2009 Macbook Pro.  I got the exclamation mark with hard disk irrepairable error.  I took it to the local Apple store.  They did a number of hardware tests and after several false calls saying it was ready (when I arrived to pick it up and tried to set up OS (select language etc) I got spinning beachball), I finally brought it home with Lion installed.  All seems well, and I restored the data from Time Machine backup done under Snow Leopard.  To my surprise, I find old versions of the login keychain - last updated 2010.  I had 2 separate time machine backups going back six months, but when I tried to browse one for the newer keychains, I find that all previous Time Machine backups have been removed and all I have is the Time Machine backup from Lion install.  So there are two related problems: one is that I lost keychain data and the other is that I can't restore from Time Machine backup since the only backups that seem to be there have restarted with Lion. Another factor, is that the technicians had to reset my user password in order to set up Lion and I subsequently changed it back to my own password. Any solutions to locating old time machine backups or restoring recent keychain entries?

    How so I know...
    Time machine preferences shows last known backup as NONE
    NOTE:  I found a section in the time machine prefs to use another backup file and all seems ok now
    Thx

  • I am out of space on my Macbook Air and have a Time Machine Backup. I want to complete reset my mac, but wonder if I can pick and choose what I restore to my computer? Can I also use my time machine backup and external storage as well?

    I am out of space on my Macbook Air and have a Time Machine Backup. I want to complete reset my mac, but wonder if I can pick and choose what I restore to my computer? Can I also use my time machine backup as external storage as well for the files I don't need everyday?

    If you are using "Restore from Time Machine Backup" option from OS X Recovery, you can only choose from the broad categories presented.
    ... Can I also use my time machine backup as external storage as well for the files I don't need everyday?
    To be clear, if you are asking if you can use the volume containing your Time Machine backup to store additional, non-Time Machine files, the short answer is yes.
    It's not a good idea though, since the Time Machine backup will eventually fill all available space, after which it begins to remove old, "expired" backups to make room for newer ones. The presence of additional files doesn't change that fact, and Time Machine will not erase them, but you will encounter a dilemma should you want to store additional files on that volume when there is no remaining space. You will have to make room for them on your own, by deleting existing files. Furthermore, since Time Machine cannot back up its own volume, those additional files will not be backed up by Time Machine.
    The easy solution for what you describe is to purchase additional external storage. External USB hard disk drives have become very inexpensive; about $55 will buy a perfectly suitable 1 TB drive.
    You can also choose to replace your MacBook Air's internal storage with a larger capacity one. Look for a suitable replacement from OWC / MacSales:
    http://eshop.macsales.com/shop/SSD/OWC/Air-Retina
    That gets a little more expensive but it is the optimum solution.

  • I have a lion server set up to host storage for time machine backups. Is there a limit to how many different computers can back up to the single server to back up. I am only backing up the users folders . The backup drive is an external Drobo with 6 TB.

    I have a lion server set up to host storage for time machine backups. Is there a limit to how many different computers can back up to the single server to back up. I am only backing up the users folders . The backup drive is an external Drobo with 6 TB. Right now it seems to back up my users all day long. I set their time machine interval to every 5 hours but it still runs all day long and is very slow. Server is on a new Mac Server mini.

    AFAIK, there is no user limit.. it is simply a question of the network load. AFP is a fairly clean protocol.. but TM is not.. it does a lot of testing of the backup.. infact your setting of 5hour gap could well make it worse.
    I would sort out the clients that are doing 100GB backups to a different backup location.. no matter how fast your network.. 100GB takes time to backup.. and over wireless forever.. it will never end.
    I guess some of these clients are on wireless?? I would separate the TM of wireless to those that are wired. No more than 4 or 5 wireless clients to a target device. Otherwise you are saturating your network with backup data. And use 5ghz.. so close by.. it is much faster than 2.4ghz and you will get much better transfer rates.

  • I performed a time machine backup without plugging my labtop into a power source. My computer died and all the settings were changed, ie the clock and date were changed back to 2001. So I tried to restore my computer using a previous time machine backup.

    I performed a time machine backup without plugging my labtop into a power source. My computer died and all the settings were changed, ie the clock and date were changed back to 2001. So I tried to restore my computer using a previous time machine backup. (which I now know was wrong). However, when time machine tried to restore it said there was not enough room to do a backup. It seems that it did a half backup because some essential  files such as system profiler are now missing. Can I undo this restore...? What can I do to fix this

    You need to do a full system restore, per Time Machine - Frequently Asked Question #14.
    If that sends a message, please note the exact wording.

  • I just installed a larger hard drive, and used my Time Machine Backup to transfer my info back to the new hard drive. When I open Iphoto, my thumnails are there, but they aren't linked back to the actual photos.I see the photos in my HD. What should I do

    I just installed a larger hard drive, and used my Time Machine Backup to transfer my files back to the new hard drive. When I open Iphoto, my thumbnails are there, but they aren't linked back to the actual photos. I see the original photo files in my HD. Is there a way to link the Iphoto thumbnails back to the original files?

    Use the Firewire cable and t boot the old Mac's hard drive to the new Mac's desktop and transfer your entire iPhoto folder.
    Use Disk Utiliy to erase'format HFS+ Journaled your TimeMachine drive and use the free Carbon Copy Cloner and clone your new boot drive to the external, it's hold option bootable.

  • I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Do you know a fix for this?

    I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Does anyone have a fix for this?

    I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Does anyone have a fix for this?

Maybe you are looking for

  • Mac Mini Server RAID 1 Disc Problem

    I tried configuring my new Mac Mini Server (with the help of my MacBook Pro's superdrive) in RAID 1 as outlined in previous discussions by: Step 1: Start the Mini in Target Mode. Press the T during start. In a few seconds the firewire logo will appea

  • Can't get dynamic text in Flash 8 pro to work

    Hi, This is driving me nuts. I am using SWObject to send a variable to my Flash 8 swf. The swf is basically a header that plays a video and I want to put the name of the web page dynamically on top of it. Sounds simple right. Well I can not get it to

  • HT201210 Recovery mode.

    I click restore and update, it goes through the setting then at the end my phone is turning off and its failing to restore?

  • Customer and vendor data

    Hi Colleagues, Can you please let me know all the related tables where customer and vendor data resides. Regards Anuj

  • Hi all i have a problem with my iphone 4 battery/ charging

    Hi All. i have charged the phone for a few hours now and gone to switch it on and it is still saying the battery is flat how can this be resolved or as anyone else had this same problem, i have also tryied my brothers charger in my phone incase it wa