After Movie Plays, Returns back to Scene Selections? How to Fix?

It seems that this would be an easy fix via the Menu Map, however, I could not get it to work.
How do you get the movie to return to the Main Menu after the movie is over? Currently it goes to the Scene Selection screen.
OR
Does it go back to the menu that you started from? Is there any way to control this without going to DVD Studio Pro?
Thanks for your help!
RL8

Hello RL8,
I haven't tried this out, but it would seem logical to me that it returns to the menu you have started from.
If you want to set the jump/return commands manually, you can do so in DVDSP. Another possibility might be to do some post production with mDVDedit: http://www.mydvdedit.com
hope this helps
mish

Similar Messages

  • In scene selection mode, can you make iDVD return to the scene selection menu after playing that scene without continuing to play all the other scenes?

    After selecting one scene from the scene selection menu, the following scenes play automatically, as if it were in "play movie" mode. Is there a way to stop that behavior and have the DVD return to the scene selection menu after playing just the selected scene?

    OK
    So what You want is a "Play All" button resp. a "Play one Chapter at a time" one.
    Then
    BAD News - There are Non ! in iDVD
    GOOD News - it can in part be faked.
    read on
    Play all resp. one chapter at a time
    Play All Button 
    1. There are NO - Play All - button in any version of iDVD
    2. It can be faked in several ways
    • Easiest and most fault proof way is to make a doublet movie containing All and with
    Chapters set to match. It will take up x2 space but is easy to understand and produce.
    Cons: Tried this in iMovie’11 by Exporting out each part as a full Quality QT.mov then Importing back into new events and putting these into a new project (Play All project). Resulting DVD had Audio that was OK (as parts) - BUT the picture was very bad and standing photo were cut of in height. So the Play All movie has to be created from same material and exactly in the same way as the individual parts + then Chapters has to be set to match.
    • It's said that one can put all movies into a Photo/SlideShow and this will also
    give the function of a Play All button - Tested - and ONE HAS TO un-cheque - Scale pictures to TV-Safe area else it will be a black frame all around and a small picture !
    Mike Evangelist1
    You might be able to get close to what you want by using a slideshow in iDVD. (It's not widely known, but you can put videos in a slideshow.) If you set the slide duration to manual, playback will pause after each movie/slide, and you can continue with the 'next' button.
    3. Using another program to do this e.g.. Roxio Toast™ where there is a Play All button option.
    Summary
    a. Making a Play All movie with same care as the individual Part movies - gives a very Good Result
    b. Using Roxio Toast™ - also an usable way to go
    Yours Bengt W

  • AirPlay not working on any of my apple devices after iOS 6 update. Any ideas on how to fix this?

    AirPlay not working on any of my apple devices after iOS 6 update. Any ideas on how to fix this?

    If You are trying to watch content when you are downloading, it let it download then watch it this works for me as i had the same problem.

  • I have updated newer version of iphone there is a problem while backing up administrator iphone.how to fix this error?

    i have updated newer version of iphone there is a problem while backing up administrator iphone.how to fix this error?

    what error?

  • I have the apple tv but it say invalide format on my tv but then wen i do the hared rest u see the apple logo but then it go back to invalide format how to fix that problem

    i have the apple tv but it say invalide format on my tv but then wen i do the hared rest u see the apple logo but then it go back to invalide format how to fix that problem

    Hi richardwilliams51,
    If you are having difficulty connecting to the Internet using your Apple TV, I would suggest troubleshooting using the steps in this article -
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    If that does not completely fix your Apple TV, you may need to restore it, using this article -
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/HT4367
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Strange colour spots (red & green) appear after RAW files converted to JPEG, anyone know how to fix it?

    Strange colour spots (red&green) appear after RAW files converted to JPEG, anyone know how to fix it? Thanks.

    I use "Export" function to convert the picture from RAW format to JPEG format, resolution 240 pixels per inch. Strange red dots appeared in the area supposed to be dark grey, as per the picture below. The red colour does not appeared in the original RAW picture when viewing from Lightroom, only exist in the JPEG it created. Any ideas how to fix this? Thanks!

  • My iPad 1st is freezing up when i play games on it, anyone know how to fix this problem? Please Help

    My iPad 1st is freezing up when i play games on it, anyone know how to fix this problem? Please Help

    This is an ipad 2 it hasn't been updated, the thing is I restored it to the orginal setting because it was acting up, instead of 59.9 GB it gave me the memory capacity of 58.9 that has been already been use. Do you think using a different computer that hasn't been use on my ipad will raise the memory capacity? I've done it before just that the computer that I've been using has my ipad's data.

  • My iPhone will ring but not play music. Does anyone know how to fix this problem?

    My iPhone will ring but not play music. Does anyone know how to fix this problem?

    Clean iPhone charging port with clean dry toothbrush. See if fixed. If not, and if there is Warranty or AppleCare make Genius reservation or set up service and take or send to Apple. If no coverage, clean again with toothbrush and small amount of Isopropyl Alcohol.

  • HT201365 after installing ios7, my phone is disabled.  how to fix?

    after installing ios7, my phone is disabled.  how to fix?

    I have the same problem with my 4S.  I installed the IOS 7 yesterday and now my phone just has the Itunes icon.  I've tried restoring thru itunes and cant' get past that.  It keeps telling me there's an error but no meants of correcting the issue.  I'm stumped

  • HT201210 iphone 5 is stuck in recovery mode after downloading new apple software, does anyone know how to fix this ?

    My iphone 5 is stuck in recovery mode after downloading new apple software, does anyone know how to fix this I keep getting error message 3014 ?

    i dont know but you went through all of this
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • GetURL AFTER movie plays

    i'm trying to play a .flv file that is called from within a
    .swf
    i've got that part working using flash by just importing the
    video into scene 1. it plays the video.
    now when the video has finished playing -- and not until then
    -- i then want to do a getURL to splash.htm in order for the viewer
    to be taken to another page on the site where there is a nice
    looping graphic for them to see but only AFTER the video has
    finished playing
    i don't know where to put the getURL. i assume i'm not
    expected to figure out precisely on which frame number the movie is
    going to finish playing and put the getURL there right?
    isn't there a way for it to do the getURL after and only
    after the .flv movie has finished playing, whenever that may be?
    as it is now, it does the getURL before the video has
    finished playing with the frame i've got it on now or if i put the
    getURL in the next scene it just does the getURL before the video
    has had a chance to play through
    is there a way for it to know that the video is playing and
    not launch the getURL until it's done?
    i'm looking for a way to do this using the guided script, i
    don't know code

    How am I playing it? I opened up a New Flash Document in
    Macromedia Flash Professional 8. I did a File > Import Video and
    then specified the .flv file and opted for 'Progressive Download
    for a Web Server' option. It processed that and I had a video on
    the stage, that's it.
    Then File > Export Movie creates a .swf file that
    apparently automatically calls and plays the .flv file. I didn't
    add any code or actions or anything and it plays.
    Does that tell you how I'm playing the video or might I be
    leaving something out?
    I looked up NetStream.onStatus but I don't know code and it's
    pretty Greek to me...what exactly am I supposed to do to get it to
    do a getURL action after the movie has played? I'm not even sure
    where the code would go, like on which frame...within the same
    scene where the video is playing I assume?
    For comparison on ease of use, the swishvideo program I was
    using has a toggle button on the export options that you just click
    and then type in the URL you want launched, so this is pretty far
    removed for me in terms of complexity...

  • Streaming radio just stopped working Firefox version 8, but I can get everything else. Add on's are up to date. I can't recall if it happened after the Firefox up date or after listening to last.fm or what! How to fix this?

    Streaming radio just stopped working Firefox version 8, but I can get everything else not on stream to work. Add on's are up to date. I can't recall if it happened after the Firefox up date or after listening to last.fm or what prompted it. How to fix this?

    I installed-enabled MS win media player firefox 1.0.0.8, i still did not get streaming, error box comes up and says 'stream load error', the 'windows media test' thing did not work, i tried iheart radio-no luck, so i disabled win media player plug-in dynamic link library 3.0.2629 and tested and still did not work, i also have plug ins: silverlight 5.0.61118.0 and quicktime 7.6.9 7.6.9.0 enabled. I don't know why all of the sudden i have a stream problem with firefox, yesterday, i tried on IE which i never use and had no problem with it. i will try to do more trouble shooting and see, its really frustrating, if can't figure out, i guess will have to revert back to IE which i really don't want to do, but---oh well. thx for help.

  • How can I get my movie to play that I downloaded from my ipad to my pc? It will play the bonus features, scene selection etc but not the movie

    I bought some movies from iTunes to put on my ipad. I stored them in icloud and downloaded them to my pc. problem is that although the bonus features etc will play on the pc, the actual movie won't! What should I do??

    What happens when you try to play the actual film ? And have you tried deleting them and (assuming that they're still in the store) redownloading them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page - or going into Edit > Preferences and on the Store tab ticking the 'show iTunes in the Cloud purchases' tick box so that they show in the My Movies part of your library with a cloud icon against it for redownloading) ?
    (You can't store films in the cloud, whether they will show there for redownloading depends upon what country that you are in - and if you move countries or if the rights-holder removes them then you also won't be able to redownload them. Ideally you'd be taking a backup copy of all of your downloads, and not relying on being able to redownload them in the future.)

  • Flash loader reappears after movie plays

    i am new to flash and cannot figure this out!!! it's probably
    super simple... i have created a loader with progress bar and it
    seems to work fine, but after my movie finishes playing the loader
    screen with progress bar reappears at the end. how can i make it go
    away? here's the actionscript i have so far:
    loader.contentPath = "ice.worlds.2.swf";
    loader.autoLoad = false;
    pbar.setStyle("themeColor", "0x00AEEF");
    pbar.setStyle("color", "0xCCCCCC");
    pbar.setStyle("fontFamily", "verdana");
    pbar.setStyle("fontSize", 10);
    pbar.source = loader;
    pbar.mode = "polled";
    thanks in advance for your help!

    i tried what was suggested below, but it didn't work. do i
    need to put anything in the parentheses and if so what? i tried
    leaving it as is and i also tried putting the name of the loader
    file in: "iceworlds.loader.swf"
    thanks!

  • I just got a replacement for my iPhone 4S, ever since i could be sitting in the same spot and go from 5 bars w/ 4G to 1 bar then it will say searching..then shortly after it will return back to 5 bars. Apple or service provider?

    I just went to the Apple store not three days ago to get a replacement. They gave me a replacement then moved on to the next customer. Ever since I have gotten home my service has been going in and out. I can have my phone in the same place and it can say that i have 5 bars with 4G, then not two seconds later it will go to 1 bar, after that it will say Searching..for a little over two minutes. Then it will go back to saying that i have 5 bars with 4G, and the cycle will continue. I am not sure whether this is an Apple problem or if it is my service provider. I have talked to several others who have the same service provider and they say that they are not experiencing any problems!

    Basic troubleshooting from the User's Guide is reset, restart, restore.  Has any of this been tried?
    Unless and until is has been, Apple will not do anything, beyond the basic troubleshooting listed above.

Maybe you are looking for