After moving to JDK 1.5.0_17 - KrbException: The ticket isn't for us (35)
Hello, I met following problem.
As we try to use more recent update of JDK 5.0 (1.5.0_17) our SSO-module brings exception. With previous update of the same JDK (1.5.0_09) everything works without any problems. Here is exception:
Using builtin default etypes for default_tgs_enctypes
default etypes for default_tgs_enctypes: 3 1 23 16 17.
CksumType: sun.security.krb5.internal.crypto.RsaMd5CksumType
EType: sun.security.krb5.internal.crypto.DesCbcMd5EType
KrbKdcReq send: kdc=<NAME_OF_KDC> UDP:88, timeout=30000, number of retries =3, #bytes=1305
KDCCommunication: kdc=<NAME_OF_KDC> UDP:88, timeout=30000,Attempt =1, #bytes=1305
KrbKdcReq send: #bytes read=88
KrbKdcReq send: #bytes read=88
KDCRep: init() encoding tag is 126 req type is 13
KRBError: sTime is Wed Jan 28 18:23:19 CET 2009 1233163399000
suSec is 821809
error code is 35
error Message is The ticket isn't for us
realm is <NAME_OF_REALM>
sname is oas
msgType is 30
KrbException: The ticket isn't for us (35)
Caused by: KrbException: Identifier doesn't match expected value (906)Remarks:
1. OS is WindowsXP SP2
2. allowtgtsessionkey is specified in registry
3. "use DES encryption" in the AD account settings is specified and in krb5.conf it is specified:
default_tgs_enctypes = des-cbc-crc
default_tkt_enctypes = des-cbc-crc
So, as I've written above these settings are not changed by moving from one update of JDK to another.
And one more remark: if not to use "useTicketCache=true" or if to start application while not being logged in to domain, it means application promts to enter login data manually - login is also successful. Only using "useTicketCache=true" and SSO-login exception is thrown.
From "Troubleshooting Kerberos Errors" at
http://download.microsoft.com/download/5/9/c/59c349f5-f0c8-4b9e-9f70-dbc5f2a8c330/Troubleshooting_Kerberos_Errors.DOC
0x23 - KRB_AP_ERR_NOT_US: The ticket isn�t for us
Associated internal Windows error codes
o SEC_E_WRONG_PRINCIPAL
Corresponding debug output messages
o DebugLog(�KLIN(%x) Ticket (%s) not for this service (%wZ).\n�)
o D_DebugLog(�KLIN(%x) Tgt reply is not for our realm: %s instead of %s\n�)
o D_DebugLog(�KLIN(%x) Verified ticket client realm is wrong: %s instead of %s\n�)
Possible Cause and Resolution
o The server has received a ticket that was meant for a different realm.
Resolution
Verify that DNS is set up correctly. Verify that packets are correctly routed across the network.
Similar Messages
-
After moving from my home country (Poland) to the Middle East (UAE) with the same computer I can not get connected to Apple Store and iTunes Store. Any clue why?
Regards,
MaciekClick the round flag icon bottom right corner of the App Store window.
-
Cannot download trial version. This always appears "You are running an operating system that After Effects no longer supports. Refer to the system requirements below for a full list of supported platforms." PLEASE HELP.
Hello,
in this case please have a look here where you can compare it with your equipment : System requirements | After Effects.
Good luck!
Hans-Günter -
I am trying adobe Photoshop and adobe illustrator because I can't decide which one to buy so I want to try both, after I downloaded Photoshop I can not see the option "free trial" for adobe Illustrator, it is because I can only free try one at the time??
Bryan,
You can download both at the same time.
But you may wish to start off with one and use it full time, then download the other later, so you get the maximum possible time with both.
If you have trouble getting the free trial on the Adobe site, you may try here or here:
http://prodesigntools.com/tag/ddl
http://technolux.blogspot.co.nz/2011/02/adobe-direct-download-links-less-akamai.html#more -
After cropping a photo, how can I zoom the small cropped photo to fill the screen on a slideshow?
Thank you
ELHID
JimHess <[email protected]> wrote:
JimHess http://forums.adobe.com/people/JimHess created the discussion
"Re: I have lightroom 5. After cropping a photo, how can I zoom the small cropped photo for slideshow?"
To view the discussion, visit: http://forums.adobe.com/message/5554629#5554629 -
after moving everything to an external hard drive, is there a way to restore the playlists you've already created if they're not there anymore?
If you moved the iTunes folder to your external drive, you moved the iTunes library file - iTunes Library.itl, which is in that folder.
You need to tell iTunes where it is, start iTunes with the shift key held down and iTunes should ask you to choose a library. -
I just got a new harddrive installed in my laptop so I had to reinstall all my programs, including firefox. Everything was good until I tried to check my e-mail. I go to the sign in page for hotmail and log on, everything goes well until that. But after a few moments, directly when I try and send an e-mail or forward something it says "Kan op dit moment geen verbinding maken met outlook.com. Probeer later opnieuw" which translated in English means something like "You can't make a connection to outlook.com at this time. Try again later". When I try and refesh it brings me to the "This connection is not safe" page and I don't get the option to "Understand the risks". I am looking for a job, so at this time not being able to use mail is pretty bad. I can still use internet explorer, but you know... I'd rather not. English is not my native language so excuse potential spelling an grammar mistakes.
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Hello there ive just downloaded 2 albums from itunes store and found that they only play for a short while and then flips onto another tune which again only plays for short while so on and so forth which makes the albums completely useless does anyone have a solution?
Assuming you are in a region where you are allowed to redownload your past purchases, delete the current copies from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
tt2 -
Problems with input accented characters after moving JInitiator to JDK 1.5
After upgrading from JInitiator 1.3.1.18 to JDK 1.5.0_06 (jdk plugin in IE), the input of accented characters (in our case portuguese) isn't working anymore in text areas on the forms (Forms 10g).
So, if you push first the "´" key and then the "a" key, you should get as result "á" (worked correctly with JInitiator), but after upgrading to JDK 1.5 you will get simply a letter "a".
Pressing Alt + 160 shows correctly "á".
Somebody can give a clue about this problem please?
Downgrading again to JInitiator is no option for us, as we need a more modern JVM (for a Dicom viewer applet we developed), and IE crashes if you have an Oracle form running with JInitiator, and then try to open another IE page with an applet requesting JVM 1.5 ...
Thanks a lot for your comments.
Alberto A.Smulders
HostDat Lda. - PortugalIn IE, the server must be in the Trusted Sites list & the security for Trusted Sites set to low
Tools -> Internet Options
Security Tab
Sites button
Add all Forms servers, or use a wildcard to get your entire domain. If you are not using SSL, uncheck the "Require server verification (https:) for all sites in this zone"
Set the Security Level for this zone to Low. If the slider bar is not there, click the Default Level button, then slide the security setting to low. -
Failed boot after moving hard drive (IDE not SATA)
Greetings all.
I am attempting to setup a headless box, and in doing so I am installing Arch on one system (Sapphire Axion A3-M275 Motherboard), then moving the hard drive to the new system (SGS1660, a VIA CLE266/VT8235 based headless rack-solution). After moving the drive into the SGS1660, the system fails to boot. Attached output from the Serial Console:
Booting 'Arch Linux'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz26 root=/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b r
o console=ttyS0,115200
[Linux-bzImage, setup=0x3600, size=0x1ad6d0]
initrd /kernel26.img
[Linux-initrd @ 0x2ff21000, 0x9e7a5 bytes]
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 20 11:20:32 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002ffd0000 (usable)
BIOS-e820: 000000002ffd0000 - 000000002ffde000 (ACPI data)
BIOS-e820: 000000002ffde000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x2ffd0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000002ffd0000 (usable)
modified: 000000002ffd0000 - 000000002ffde000 (ACPI data)
modified: 000000002ffde000 - 0000000030000000 (ACPI NVS)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000ff780000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-000000002ffd0000
RAMDISK: 2ff21000 - 2ffbf7a5
ACPI: RSDP 000f6ad0 00014 (v00 ACPIAM)
ACPI: RSDT 2ffd0000 0002C (v01 A M I OEMRSDT 09000521 MSFT 00000097)
ACPI: FACP 2ffd0200 00084 (v02 A M I OEMFACP 09000521 MSFT 00000097)
ACPI: DSDT 2ffd0390 03270 (v01 MiniV MiniV080 00000080 INTL 02002026)
ACPI: FACS 2ffde000 00040
ACPI: OEMB 2ffde040 00046 (v01 A M I AMI_OEM 09000521 MSFT 00000097)
0MB HIGHMEM available.
767MB LOWMEM available.
mapped low ram: 0 - 2ffd0000
low ram: 0 - 2ffd0000
node 0 low ram: 00000000 - 2ffd0000
node 0 bootmap 00011000 - 00016ffc
(9 early reservations) ==> bootmem [0000000000 - 002ffd0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000626e44] TEXT DATA BSS ==> [0000100000 - 0000626e44]
#4 [002ff21000 - 002ffbf7a5] RAMDISK ==> [002ff21000 - 002ffbf7a5]
#5 [0000099c00 - 0000100000] BIOS reserved ==> [0000099c00 - 0000100000]
#6 [0000627000 - 0000629230] BRK ==> [0000627000 - 0000629230]
#7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#8 [0000011000 - 0000017000] BOOTMAP ==> [0000011000 - 0000017000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0002ffd0
HighMem 0x0002ffd0 -> 0x0002ffd0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0002ffd0
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
SMP: Allowing 1 CPUs, 0 hotplug CPUs
No local APIC present or hardware disabled
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 11 pages at c1606000, static data 24444 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194911
Kernel command line: root=/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b ro console=ttyS0,115200
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1326.894 MHz processor.
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (00000000:00000000)
Memory: 772708k/786240k available (2905k kernel code, 12976k reserved, 1052k data, 392k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf07d0000 - 0xff7fe000 ( 240 MB)
lowmem : 0xc0000000 - 0xeffd0000 ( 767 MB)
.init : 0xc04e3000 - 0xc0545000 ( 392 kB)
.data : 0xc03d647f - 0xc04dd6a8 (1052 kB)
.text : 0xc0100000 - 0xc03d647f (2905 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 2654.36 BogoMIPS (lpj=4422980)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 64K (32 bytes/line)
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 10k freed
ACPI: Core revision 20090320
ACPI: setting ELCR to 0200 (from 8c20)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (2654.36 BogoMIPS).
net_namespace: 1056 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.0: quirk: region 0800-087f claimed by vt8235 PM
pci 0000:00:11.0: quirk: region 0400-040f claimed by vt8235 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0xe900-0xe90f has been reserved
system 00:05: ioport range 0xea00-0xea0f has been reserved
system 00:05: ioport range 0xeb00-0xeb2f has been reserved
system 00:05: ioport range 0xec00-0xec7f has been reserved
system 00:05: ioport range 0xe800-0xe83f has been reserved
system 00:07: ioport range 0x3e0-0x3e7 has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x400-0x41f could not be reserved
system 00:09: iomem range 0x0-0x9ffff could not be reserved
system 00:09: iomem range 0xe0000-0xfffff could not be reserved
system 00:09: iomem range 0x100000-0x2fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xddd00000-0xdfdfffff
pci 0000:00:01.0: PREFETCH window: 0x000000d5c00000-0x000000ddbfffff
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 633k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1248948860.509:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1510
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 392k freed
:: Loading Initramfs
:: Running Hook [udev]
:: Loading udev...SCSI subsystem initialized
pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
done.
Waiting 10 seconds for device /dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b ...
Root device '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b' doesn't exist, attempting to create it
ERROR: Failed to parse block device ids for '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b'
ERROR: Unable to detect or create root device '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b'
You are being dropped to a recovery shell
Type 'reboot' to reboot
Type 'exit' to try and continue booting
NOTE: klibc contains no 'ls' binary, use 'echo *' instead
If the device '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b' gets created while you are here,
try adding 'rootdelay=10' or higher to the kernel command-line
ramfs$
I think what is happening is that the kernel does not have the drivers for the IDE controller on the board for the CLE266/VT8235. Does this seem accurrate? And if so, how can I verify the current kernel config, then compile a kernel with everything else Arch needs to boot properly? I am familiar with the old means of setting up a kernel using the 'make menuconfig; make; make modules_install' etc method.
Thanks for the help in advance!Hi, not sure if this is still causing you an issue, but I just ran into the same problem.
For me, I have a Sharp PC=MM1110 which has no cd drive and doesn't like to boot from USB. To get Arch installed on it, I had to attach it to another PC (via it's docking cradle, which lets it show up as a USB hard drive), then boot the other PC from an Arch install cd and select the USB hdd for all of the partitioning etc.
When I rebooted after the installation, the Sharp wouldn't boot.
First, I had to edit the grub menu entry to point to (hd0,0), at which point I got the error listed in the first post... Failed to parse block device id's.
If i booted into fallback mode, it booted without a problem.
For me, the solution to finally get it working was to boot into fallback mode, remount the filesystem as r/w, and run mkinitcpio -g filename to rebuild the kernel. Once completed all I had to do was point grub to the new kernel image and it booted ok.
Hope this is useful to someone -
After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer and .mac account. Does anyone have any advice on how to fix this issue?
Welcome to the Apple Community.
Which OS are you using. -
i cannot find my contact info after moving to iCloud, i cannot find my contact info after moving to iCloud, i'm using PC
Please try clearing cache and cookies. If that doesn't help you can try disabli9ng add-ons and see if it help. [[Safe Mode]] is to disabled add-ons.
-
HT4898 how do you syn mail after moving to icloud
How do you syn mail after moving to iCloud?
Yes, you can use iCloud mail with OS X 10.6.8. However you need to enter the account details manually using the Mail Server Information
-
Wrong reply-to address sent from iPhone mail after moving to iCloud
I had this strange experience that shortly after moving to iCloud, one of my email accounts got mixed up with the reply to address.
I use both accounts:
- [email protected]
- [email protected]
When I reply to a message received in my xs4all account and send a reply (visually is in the mail the field From: [email protected]), the receiver will get a mail with reply address [email protected]
So I noticed that all replies were sent to my gmail account.
Has anyone else the same?Try SETTINGS, ICLOUD, click ACCOUNT field and scroll down to MAIL. Click on MAIL field. Here you can click on EMAIL field and a new screen of choices for default account comes up. Choose your default account here. Go back a page and you see ALLOW SENDING FROM and a list of allowed addresses to pick. Choose all of the ones you'd like to be able to use. HOPE THAT HELPS YOU. Click DONE when you finish. Tami
-
Email aliases gone after moving to iCloud
Apple told me we'd be able to keep out email aliases after moving from MobileMe to iCloud - now only my main email address appears. Is there any way to use the aliases?
rephrase your question. I do not understand.
Maybe you are looking for
-
How do I find the size of a video file in iTunes store?
Is there any way to find out how big a video file is before I download it to my computer? I see that movies show the file size in the product description, but what about episodes of a TV show? Or a complete season? Or a video in iTunes U? I tried "ri
-
Parser for Java v2 decimal formatting bug
XML Parser for Java v2 (up to 2.0.2.7) does not seem to format decimal numbers correctly with format-number() function. It can handle floats, but not doubles. When can this bug get fixed? BTW, is there a bug database for Java XML Parser? Thanks, null
-
Hi, Just wanted to know if somebody is aware of an open source java kernel for finite element method solving ... Guillaume
-
I have looked at previous posts but can not find a way of password protectin an entire folder. I have photos on my Macbook that I dont want my 7 year old to see. If necessary I will move my photos (if possible) to another application but I really do
-
Problem with reading AOL emails. When I try to read an AOL email (old or new) the AOL email appears for a split second and then I get an "Internet Search" box and cannot see the email. I had read that some have seen a similar problem getting a Bing S