After multiple attempts to install Itunes 11 without problems I finally got it to work

About a month ago when updating to Itunes 11, I started getting errors that would not allow me to Install the update and then when I did the program crashed when trying to open.  After multiple removing/installing all the apple software per instructions found in these communities I finally came upon a solution that worked.  After getting itunes to install but getting a error when I clicked on the icon to open Itunes, below is the steps I found on another web site that actually WORKED and was able to update to new/greatest version and Itunes actually opened correctly when I clicked the icon. HERE is what worked!!....
Highlight all of the following 10 lines of text that begin with regsvr32 and then choose Copy from the Edit menu of your web browser:
regsvr32 /s softpub.dll
regsvr32 /s wintrust.dll
regsvr32 /s dssenh.dll
regsvr32 /s rsaenh.dll
regsvr32 /s gpkcsp.dll
regsvr32 /s sccbase.dll
regsvr32 /s slbcsp.dll
regsvr32 /s mssip32.dll
regsvr32 /s cryptdlg.dll
regsvr32 /s initpki.dll
Open the Notepad program by navigating to:
Start > All Programs > Accessories > Notepad
In Notepad, choose Paste from the Edit menu. Note: make sure that the text that appears in Notepad is the same as what is shown above.
From the File menu, choose Save As.
In the File name field type appleipod.bat and save the file to the Desktop.
Close Notepad and locate the appleipod.bat file.
Double-click the file and you will see a black window appear on the screen for about a minute. Wait until the window automatically disappears and proceed to the next step.
The appleipod.bat file can be deleted at this time.
Hope this helps!

Hi , There are two very informative Mac threads that you may want to refer to. There really is nothing that I can add to them.
I don't know if they are still on Page 1 but if not try Page 2.
Thanks,
eidnolb

Similar Messages

  • I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install  iTunes.

    I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install  iTunes.

    Did you follow the exact instructions in this Apple support document to remove and re-install iTunes and ALL other Apple software on your XP machine?
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    B-rock

  • I have installed ios7 on my iPad 4. After installation it asked me pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to ios6.

    I have installed ios7 on my iPad 4. After installation it asked me a pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to ios6. I asked Apple store & tech said to format it but I will lose all the data..!

    Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
    Thanks

  • I have attempted to install iTunes multiple times but to no avail. I have installed every file, and followed every instruction on the support pages. I click download, and it takes me directly to the "Thank You for Downloading" page without doing anything.

    I have attempted to install iTunes multiple times but to no avail. I have installed every file, and followed every instruction on the support pages. I click download, and it takes me directly to the "Thank You for Downloading" page without doing anything. I am running it on FireFox, and I have tried with Internet Explorer, neither have worked. I have been trying to do this for weeks now, and I am getting majorly frustrated. Please, help.

    Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

  • On every attempt to install Itunes I've recieved the error message, "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package Vendor." What do?

    On every attempt to install Itunes I've recieved the error message, "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package Vendor." What do?

    I know there's a million threads like this, but I thought I'd record my experience.  I, too, was having the original poster's error when I tried to update iTunes on Windows XP.  I think I was stuck on 10. 
    I solved it by un-installing iTunes and every other Apple app.  I discovered that Apple Software Update would not un-install as its MSI file could not be found.  I used the "Windows Install Cleanup" tool from Microsoft to remove Apple Software Update from the list of installed programs.  Google "kb290301" for a Microsoft page that includes a download link for it.  After that, I was able to install a fresh copy of iTunes 10.5.2.
    I'm not sure why this app's folder and MSI were missing from my computer.  I had once used Laplink PC Mover to move everything from my old computer to this one, and perhaps it missed a bit.

  • HT1212 how do you get the photos off your phone when it is recovery mode? My daughter has put a passcode on the 4s iphone and cant remember. After multiple attempts and then resorting to this support forum "iOS: Forgotten passcode or device disabled after

    My daughter has put a passcode on her dads iphone 4s and cant remember it and after multiple attempts it is now in "connect to itunes. My husband does not want to lose the photos on it. Is there a way to get photos off before restoring

    If that phone has been synced in iTunes, you can restore from the backup after having restored the phone.
    There is also a little mac app that can read the iPhone backups that are in iTunes,called ibackupviewer.
    Then when there is no backup of the iPhone: read the following aricle:
    http://www.video-converter-mac.org/recover-notes-from-iphone/

  • Install itunes without bonjour or apple mobile device support

    For my company having bonjour is not an option and is considered a security threat,even after uninstalling bonjour it still appears in the registry. Therefore it was nessesary to put on our company server the msi file for itunes.
    To install itunes WITHOUT bonjour:
    1.) Download the itunes setup exe file.
    2.) Download 7-zip or winrar, and install.
    3.) Right click the exe file and extract the files.
    4.) Delete bonjour and or mobile device support (if you perfer not to have an iphone service running all the time)
    5.) Run the extracted itunes.msi file.
    Now the only service that will be installed is the ipod service, which is better than having 3 services just to put songs on your ipod.

    Someone may have a brainwave at Apple and give people a choice on what iTunes installs with an optional gui installer. I'm getting fed up with installing software that constantly want to put other unnecessary products on my system.
    I always try yo install using a custom install (where I can) option as opposed to "Express Setup" or "Typical Install" because invarably they come with a "very useful" toolbar or default search engine.
    I do not want to install Safari an my machine, in fact I would go so far as to say I will never install it on principle. Everytime the iTunes update window comes up, the option to install Safari is automatically ticked, I find this grossly offensive and arrogant by Apple.
    This post might get deleted.

  • Attempting to install iTunes Version 10.5 and getting Invalid Signature. Can someone please help???

    I am attempting to install iTunes Version 10.5. I am getting the following messages...
    "Files shared by these updates" has an invalid signature. It will not be installed.
    "iTunes" has an invalid signature. It will not be installed.
    "Safari 5" has an invalid signature. It will not be installed.
    I somehow got around this annoying "invalid signature" problem before by installing the iTunes update through the Apple site.
    http://www.apple.com/itunes/download/
    When I tried that, now I get...
    "The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified. Please run the installer again, or click Finish to Exit"
    All this to get the latest iPhone software. And every blessed time I go to Sync my iPhone, I run into iTunes issue on my Dell PC here. I guess PC and Mac just cannot play well together.
    Can someone PLEASE help me out here???
    Thanks in advance for your help.
    PSULionRP

    Hi. I also had this problem when trying to connect a new iPhone 4S & it needed iTunes 10.5. Went to the Apple website as update section of iTunes was not getting any luck - went to downloads section of Apple website & downloaded the whole iTunes 10.5 program as though I did not have it in the first place (& also downloaded the programs for Quicktime 7.7.1 & Safari 4.0.3) ie not just the upgrades. I created a restore point in my Windows XP in case it all went pear shaped & then went ahead & installed all 3 programs. Opened iTunes at the end & all my music, apps, movies were all still there & now the new iPhone 4S works perfectly with the iTunes. Hope this helps.

  • How to install itunes without cd/dvd rom support?

    Hi,
    Everybody knows when you install iTunes to any windows device, you will have a problem with your dvdrw afterwards. Till day, every installation i made end up with losing my dvd-rom.
    There is 3 solution to this problem, but those solutions never worked for me and last time i used my company notebook without it's dvdrom for over a year.
    Now, i reinstall my notebook with Windows 8.1 Update 1 and i want to install iTunes for my music but i can' let iTunes do the same thing again.
    Is there anyway install iTunes without cd-dvd 3rd party/usb/firmware driver support?
    I search on net and i found this link but it's way too old
    http://support.apple.com/kb/TA44491?viewlocale=en_US

    QuickTime is required for iTunes to run. You can think of iTunes as a media manager "front end" to QuickTime which handles the actual playing of the media.
    Safari was an optional install when I installed iTunes on my Windows system. I wasn't forced to install Safari. MobileMe is also no longer automatically installed, though it will update if it finds an existing installation. I didn't get it forced on me when I installed on my Vista system.
    You might find this helpful:
    http://blogs.zdnet.com/Bott/?p=554
    Regards.
    One tip: it will pay better dividends if you avoid ranting. Apple won't see your rants (except to delete them) and we, your fellow users who are with rare exceptions the only ones participating here, don't really want to be yelled at.

  • Error 7 when attempting to install Itunes on PC

    After installing Itunes on my PC I got a message that itunes was installed correctly, however, when I click on the Itunes icon I get a message stating that Itunes was not installed correctly Please reinstall Itunes.  Error 7 (Windows 193).  Itunes worked fine until about 3 months ago.  I now have no memory left on my Ipad and need to delete over 5000 pictures, but i cannot sync with Itunes.

    Hey ievafromsa,
    Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • HT202213 Can multiple iPhones share one iTunes without syncing the phones together? We just got new iPhones and set up desperate apple id's, but don't know if we can both sync to our existing iTunes without linking our phones together (contacts, apps, etc

    Can multiple iPhones share one iTunes without syncing the phones together? We just got new iPhones and set up seperate apple id's, but don't know if we can both sync to our existing iTunes without linking our phones together (contacts, apps, etc) ????

    How to use multiple iPods, iPads, or iPhones with one computer

  • My computer was reimaged and iTunes was deleted, now when I try to sync my ipad it says it is synced with another library?  How do I sync with the newly installed iTunes without losing all of my data on my ipad?

    My computer was reimaged and iTunes was deleted, now when I try to sync my ipad it says it is synced with another library?  How do I sync with the newly installed iTunes without losing all of my data on my ipad?

    Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • I am getting a runtime error message when attempting to install iTunes.

    When attempting to install iTunes I keep getting a Runtime Error! message under the Microsoft Visual C++ Runtime Library.  Anyone have this same issue and an idea on how to remedy?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Receive "Access Denied" error message when attempting to install iTunes

    Receive "Access Denied" error message when attempting to install iTunes. 

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Just installed iTunes 10.4.1 and it wouldn't work.  Did a system restore.  ITunes will not boot.  Computer tells me I must reinstall iTunes.  How do I do that?

    Just installed iTunes 10.4.1 and it wouldn't work.  Did a system restore.  ITunes will not boot.  Computer tells me I must reinstall iTunes.  How do I do that?

    Thanks, but since iTunes will not boot, I cannot run that iTunes diagnostic.  Just need to know how to reinstall iTunes (Windows XP). Do I need to remove the existing non working version of iTunes, or can I just install iTunes from Apple like I was a new user?

Maybe you are looking for

  • Mini dvi to hdmi adapter

    I have ordered a mini dvi to female hdmi adapter for my MacBook...and hdmi cable to run to my Pansonic HDTV; so I can watch movies I rent from iTunes. Do I need an additional cable for sound? If so, please inform what I need? I do have HDMI Audio inp

  • How to solve the dn collision in AD during AD account provisioning

    Hello, I have multiple users with the same last name, first name and middle name. We decided to build the full name using the rule: lastName, firstName OR lastName, firstName# (if the lastName, firstName already exists, add a number and the number ju

  • Problems with Mapping Input Parameter

    Hi everybody, just another question. I have a Mapping with an Mapping Input Parameter. If i provide a Parameter with an prefixed 0 e.g.: 01234 the output of this is 1234. How can i manage this that the output of the Input Parameter ist 01234 and not

  • Can I use toast 10 to convert AVCHD to DVCPRO HD *with timecode* ???

    I have a project shot in DVCPRO HDp60 and they've now given me some AVCHD footage to work with. Following the advice around here I went out and got Toast 10 to convert the AVCHD to DVCPRO and it works but I don't get the timecode. I need to preserve

  • My mac won't read disks and keeps ejecting them

    Everytime I insert a disk in my Macbook Pro, it attempts to read them but seem to not be able to. Then after attempting it ejects them. I'm not sure what to do?