After my ipod touch restarts because it says plug into itunes and i does not pop up it does not appear in the apple window like it said it would.

After my ipod touch restarts because it says plug into itunes and it does not pop up it does not show up in the itunes window like it says it would. why.

Start here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Similar Messages

  • I have erased my ipod as i am selling it on. I wanted to check all my stuff (pictures, notes ect) had been erased, but everytime i plug my Ipod into the computer it isnt recognized. it says plug into Itunes, and i have. Nothing happens. what do i do? HELP

    have erased my ipod as i am selling it on. I wanted to check all my stuff (pictures, notes ect) had been erased, but everytime i plug my Ipod into the computer it isnt recognized. it says plug into Itunes, and i have. Nothing happens. what do i do? HELP

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • What do you do if your ipod is disabled and it says plug into itune and when you plug it in to itunes it says the ipod must be unlocked for itunes to work

    i need help

    Place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • 2nd generation ipod touch wont turn on. just says plug into itunes and my itunes will not pick it up, what do I do about it?

    If Someone could help me out that would be GREAT!

    try reset
    hold on/off button and home button together for 10 sec
    try restore
    http://support.apple.com/kb/HT1414

  • My ipod touch 5 generation 16gb wont restore on itunes and sometimes it says that an error has accord (4013)

    my ipod touch 5 generation 16gb wont restore on itunes and sometimes it says that an error has accord (4013)

    Check USB connections
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

  • My ipod touch isnt sensed by my computer or itunes, and its stuck in restore mode

    my ipod touch wont connect to my computer or itunes,
    and when i plug it in to any computer it still isnt sensed, ive
    gone through all the troubleshooting from apple and itunes,
    and it just wont work. its not noticed in task manager
    either.i dont know what to do, ive been working on getting
    it fixed for 2 months now, and im tired of just searching the
    web for help, so please help me if you can.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I just got an iPod 4th generation and Im trying to sync my iTunes songs from my dell laptop on to my iPod but it says I need iTunes 10.6.3. So I tryed to download it on the apple website but it keeps saying that there is an error. Any answers?

    I just got an iPod 4th generation and Im trying to sync my iTunes songs and books from my dell laptop on to my iPod but it says I need iTunes 10.6.3. So I tryed to download it on the apple website but it keeps saying that there is an error. I have already tryed uninstalling all Apple Inc. programs on my laptop then trying to install iTunes again but that has had no success what so ever. I have started to get very frusterated with this . Hopefully someone can help. I would really appreciate it. Any suggestion?

    So I tryed to download it on the apple website but it keeps saying that there is an error.
    What does the error message say? (Precise text, please.)

  • My Ipod touch will only work when plugged into a itouch radio.  When I take it out, it goes blank.  Why can I do?

    My Ipod touch will only work when plugged into an Itouch radio.  When I take it out of the charger, it goes blank.  The battery shows fully charged.  It appears that the battery is no longer charging.  What should I do?

    Try a reset: Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. If that fails, the battery may have gone kaput.

  • BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next?

    BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next as the phone is in a complete non working condition

    Spent hours trying everything suggested and finally this morning hit on a solution. iTunes must be run as an administrator. Even though you are logged into your PC as an administrator, using the iTunes shortcut does not make you an administrator in iTunes. I found this out by using the diagnostics in iTunes and reading through the results report.
    I am using Windows 7, so I clicked the start button and right clicked on iTunes and selected "Run as an adimistrator". The first restore attempt got the 4013 error. I then did the DFU thing, hold power and home buttons for 10 seconds, release power and continue holding home for 10 more seconds.
    iTunes gave me the restore message and I clicked it. I clicked the restore iPhone button and it started. The drivers loaded a couple of times. I got the apple logo with the progress bar and this time instead of disappearing, it started to fill in.
    End result, a successful restore to factory settings and a happy 14 year old.
    Hope this helps others.

  • Why does my iPad say plug into iTunes

    When I turn my Ipad on it has a symbol saying plug into iTunes, does anyone know why this is?

    There's really only one reason that would be on your screen,  your iPad was reset/wiped for some reason.   If you have a security profile on it (because of company email using Active Sync for example) and it was set to wipe the device after a certain number of invalid unlock attempts, that would do the trick if son were to have entered the wrong unlock code enough times.

  • My unlocked iphone 4 just says plug into itunes when i insert my Etisalat (UAE) sim

    My unlocked iphone 4 just says plug into itunes when i insert my Etisalat (UAE) sim. it then says restore. i have restored the phone a few times.still the same problem. my sim works in my samsung.

    Hi marissacav,
    Welcome to the Support Communities!
    The following article will provide some troubleshooting steps for this issue:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281?viewlocale=en_US
    Cheers,
    - Judy

  • Just installed new update to phone, now its saying plug into itunes but itunes doesnt recognise device

    Just installed new update to phone 5s this morning, now its saying plug into itunes but itunes doesn't recognize device.
    when the files were being extracted my pc stopped any idea of a fix?
    or can i remove the update from the program files and re-download it for my phone to be functional again?

    Hello giz mckenna,
    The article linked below details a number of steps that can help get iTunes to recognize your iPhone.
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/en-us/TS1538
    Cheers,
    Allen

  • I tried to update to ios7 but it said to plug into itunes. I've plugged it in several times but the update fails everytime and my phone continues to say plug into itunes

    I tried to update to ios7 but it said to plug into itunes. I've plugged it in several times but the update fails everytime and my phone continues to say plug into itunes. Any help is greatly appreciated

    Your iPhone was hacked at a "small phone unlocking shop "
    Only the carrier who locked the iPhone from new can unlock it no-one else
    Anything else is hacking which forfeits any help from Apple and this forum
    I also doubt that Orange will touch it
    For an understanding what hacking does see here
    http://support.apple.com/kb/HT3743..
    Since all the UK carriers ( I assume you are in the UK )
    offer unlocking you have trashed a perfectly good iPhone

  • Just updated my iphone 6 and my phone says plug into itunes. I can not do anything with it. I dont have itunes on my computer.

    just updated my iphone 6 and my phone says plug into itunes. I can not do anything with it. I dont have itunes on my computer.

    You are going to have to download and install iTunes on the computer. Your iPhone is in recovery mode. See this support document for help with that. If you can't update or restore your iPhone, iPad, or iPod touch

  • Hi. I just got the iPhone 6, plugged into itunes and made the mistake of putting an OLD back up on my new phone resulting in losing all contacts after 2013. They are not saved on the cloud. Is there any way to go back to before I screwed up?

    Hi. I just got the iPhone 6, plugged into itunes and made the mistake of putting an OLD back up on my new phone resulting in losing all contacts after 2013. They are not saved on the cloud. Is there any way to go back to before I screwed up?

    If you have performed a sync with the device since you restored this old backup, then don't bother looking for another backup. iTunes writes over the last backup each time you sync. If you were handling contacts in iCloud, you would find them by logging into iCloud. Or you can check settings and iCloud and see if the button it on for Contacts. Otherwise it might have been on the computer, if you had a program that syncs with iTunes and handles contacts, depending on the computer system you use. If Windows, it would be Windows Contacts or Outlook. If a Mac, there is a Mac Address book as well.

Maybe you are looking for

  • CS4 master pages don't transfer

    I created a book using a 6x9 format, but after I got the entire 39 chapters formatted, I realized I needed to switch to 5x8 format.  It should be easy -- just move the new masters I created in Chapter 1 to the other chapters.  Only it doesn't work. I

  • Audio quality in video imported from VHS tapes

    Hi All, I am trying to import old videos on VHS tapes, using a Canopus converter. The video is importing into iMovie just fine, but the audio has a loud buzzing sound that covers up the actual audio and is very annoying. Is there a way to extract the

  • Import pictures but not videos?

    Hi I am wondering about LR3 beta2. I was importing all my images and LR3 also imports all my video that are in my images folders but I don't want LR3 to do that? Is there any way to import only my images without moving my videos out of my images fold

  • Lion finder 2 finger gesture?

    In Finder, i cannot use 2 finger to enlarge. i try 3 4 finger they do not work~ For example: In Snow Leopard i can use 2 finger to enlarge my desktop file icon,but in Lion it does not work- I wander to know if I can set up some gesture, or the functi

  • Start page won't come up

    After logging on to my computer it goes blank. The start page won't come up. How do I fix this?