After my Modzilla update print jobs only have a blank gray page when looked at in preview and blank when printed
I accepted a update from Modzilla yesterday. After which I had no print abilities. In the preview area it is just blank and when printed the pages are just blank. I had to go back to Internet Explorer to print my work-- it printed fine so it isn't the printer.
Try the '''''reset''''' described here: <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer
Similar Messages
-
I do not use the Internet using wifi I use 3G mobile broadband and if I do need wifi it tells me I have to pay for it, but I can not work out how to install or connect my iPad with my new printer if there is not a cd slot or USB port. I only have an iPad no computer so how on earth do I use my printer with it if it I can't install the printer cd. I though I would be able to use Bluetooth and it would pick it up automatically but I am really confused now and don't know what to do please help.
The iPad uses AirPrint technology to print to a printer. Check this Apple support page to see if your printer is listed as being AirPrint compatible.
http://support.apple.com/kb/ht4356
If your printer works with AirPrint you will need a Wi-Fi network in order to connect. That Wi-Fi network does not need to be connected to the Internet. As James Ward4 says, you'll need a Wi-Fi router to set up your network. Most routers require that a computer be used during the setup process. Perhaps you could use someone's computer to do the setup if you do not had one yourself. Once the router is set up you should be able to print. -
After the lastest update on iTunes I have not been able to get into the program. I have uninstalled all components and reinstalled and now it is telling me I am missing .dll files. I am so frustrated. I probably lost my entire library except what I purchased
Your library should be safe.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Face time sees to be jerky after I pad update any one else have this problem or thoughts on hoe to fix
You probably don't have a good wifi connection.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Cheers, Tom -
I updated my mac 10.8 to mavericks but after installation the app store ask for the same software update again..i have a slow connection..i cannot install it again and again..what should i do?
In case you are not aware, Mavericks requires a high speed broadband connection.
In the event you need to restore or repair the starutp disk, OS X Recovery also requires a broadband connection as noted here > About OS X Recovery
You can check your download speed here > Speedtest.net
15Mbps or less, you may not be able to install Mavericks or use OS X Recovery. -
my computer shut down and with help from Appel it turned out that I had to erase everything . Now I only have my music from my CDs on my iPod. And no longer in iTunes as before. I do not have backup :-(
How do I save all the musicfrom the iPod on the computer?And if I buy new music from iTunes will it erase the music allready on the iPod ?
iTunes no longer recognise my iPod.
I hope someone can help!
Best MariaSee Recover your iTunes library from your iPod or iOS device.
tt2 -
I've encountered a problem while synching my entire library. After synching I've noticed that only half of my library is playable on my iPhone. And a red circle with a Stop button appears next to the songs that didn't sync. Why is this happening?
media in the itunes lib but not connected when the sync take part will fail in this manner
media in a not supported format on ios will fail to sync
http://www.apple.com/iphone-5s/specs/
Audio formats supported: AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), HE-AAC, MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV
User-configurable maximum volume limit -
LR 4 - image does not appear in Preview and will not print`
The selected image appears on the main/center panel but not in the preview screen. Printing results in a white sheet of paper with no image at all. The image has been updated to LR 4 - but made no difference. I've served help and the forums (where i saw mention of similar problems, but no comments or guidance on the problem). What am I doing wrong?
The problem began with the installation of LR4. I print directly from LR4 to my HPZ3100. I routinely select "print preview" in the print dialogue box. Now the first print I see the preview and then it prints. If I select a second print job and use the "print preview" the print preview screen comes up blank and never loads. If I try to delete the print job, it just never responds (resolves) so I have to turn off the computer and the printer and restart to clear the print job. if I don't use the print preview, it prints just fine (except that I'm not able to check what's about to be printed). Thanks for any thoughts you have on this.
Date: Tue, 10 Jul 2012 16:01:47 -0600
From: [email protected]
To: [email protected]
Subject: LR 4 - image does not appear in Preview and will not print`
Re: LR 4 - image does not appear in Preview and will not print`
created by Brett N in Photoshop Lightroom - View the full discussion
Bill, if this is only happening some of the time, then we are probably looking at a resource issue. Any pattern in when things won't print? e.g. Certain file type won't but others will? Or is it more of a timing/order thing? e.g. First file prints fine, second does not? VStromee, do no files print for you? Or is it like Bill and sometimes the print and other times they do not? Did you install any new software recently or have any updates to the OS or any application that has printing capabilities?
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4549692#4549692
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4549692#4549692. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
I have just got an iMac 21" and it continuously freezes when it goes to sleep and also when the internet is trying to load, i have tried three different browsers but it still does it (safari, google chrome and firefox), does anyone know what is wrong?
To fix the freezing when sleeping problem go to System Preferences>Energy Saver and set 'Computer Sleep' to 'Never'. It seems there is a problem for some with Bluetooth failing to wake after sleep. This fixes it 100% for me and many others on here, until Apple issue a software update to address it.
Not sure what to suggest on the internet problem. I assume you are connected and receive and send emails OK.
Edit: To try to troubleshoot the internet issue maybe try turning the Firewall off: System Preferences>Security & Privacy>Firewall tab. -
Document content does not show up on screen. Only a blank, gray page.
When I open an adobe document, the contents do not show on screen. Only a blank gray page. How can I fix this?
Hi 89r0z62cap,
It sounds as though that PDF was created from a scanned image, and you have the "Show Large Images" option deselected. Try this:
Open the Preferences dialog box (Reader/Acrobat > Preferences on Mac OS; File > Preferences on Windows).
Click Page Display and make sure that Show Large Images is selected under Page Content and Information.
That should do the trick, but let us know if it doesn't.
Best,
Sara -
I have scanned about 1600 pages of 100-year old documents and saved them as pdf files. I would like to search them for keywords and phrases. Can anyone recommend software that can be used as an index or search engine for these documents?
If you have Adobe Acrobat (not Adobe Reader) the program can perform an OCR on the document you acquired.
In the past I used ABBYY FineReader -
I bought this order W259448388 for ipad cover , 3 days ago. I need the complete UPS tracking no. The no I have on my applestore page is missing 1 digit! and you must have given them the wrong shipping adress. please make it right for this time, for small things. I am pisss off,,,!!!! URGENTTTT---
This is a user-to-user forum you aren't speaking to Apple.
Contact the Apple Store for help: http://www.apple.com/contact/ -
Please help my computer is not repsonding after doing some simple updates. I follow the instructions and which is simply click for the update to take place. I did what I was instructed to do. I did not do the new update for the Mavericks yet. I just did simple updates. The computer shutted down and restarted but would never get pass the grey screen with the spinning wheel and the booting bar that would not go past a certain point befor shutting off again. The computer is practically brand new. I purchased the computer from best by 2012 and the warrenty just ended the past October. I hardly use the computer maybe 4 times since I have had it because I have another main computer that I uses. However, I don't want to do a hard rest becuase I do have the entire adobe suits software that I paid for and don't want to loose. I have an appointment with apple today to see what they say but I hope that my computer that I hardly every use is not defected after doing a updated pushed by Apple. Any thoughts or suggestions???? Thanks in advance Apple Family :-)
Well, I was at Apple for sometime on that day. I got a Genius that did not want to work. She basically jumped to the money to tell me that my hard drive was no good and that I was out of warranty (October 2013). I began to explain to her that I had only used the computer 5 times and that I don't use this computer as my main computer because I also have a Toshiba that is less expensive that I have had for several years and not one issue out of it. The rep told me that I could by a new hard drive for $161.00 and that I would loose all of my software and photos that I have on this computer. However, I told her that it's bazaar that it happens right after my warranty goes out and had I used it more often when in warranty before October then I would have been covered. Keeping in mind that I would still be very disappointed with the product because I would loose all of my information and it would not make sense to me why the hard drive fails on a very gently used computer. So I asked for a manager and it took her some time to get one. In the mean time I watched how the other Geniuses interacted with the other customers and seen that they were very engaging with convo and very help. I guess I just I got another lemon when I got my rep. When the manager finally came. I went from A-Z with the issues and that I felt that something could or should be done because the rep said that she did tests on my machine and it read to her that my hard drive was bad and there was nothing that could be done. I explained that I was not looking forward to paying for services to have my new computer repaired. The manager offered to give me 25% off the cost but I still didn't feel that it was effective. After he left and the rep wrote the notes in the system, I told her that I didn't think that all options had been exhausted and that there was something else that could be done. I told her to erase the machine and see if the updates could be installed and if the system would continue to do the same thing. The rep was hesitant and said that I would loose everything which we already know that we were at conclusion from the beginning. She assured me that I would happen again and that I would need a new hard drive. I just told her to erase the machine and get me another manager because I was just getting tired of her unhelpfulness and negative perspective. The new manager came and was very pleasant and I explained everything once again from A-Z. I informed him that I had the machine erased and that I need his help with options because I don't feel that the rep or the last manager was resourceful or helpful. He apologies for the actions of the reps and proceed to tell me that they will run all the updates in the store and that if it booted correctly that I should continue to use the machine with out adding the adobe software back on just incase that it crashes again and I'm out of money once again. However, if it does happen again and it is a hard drive issues that he would work with me to resolve the issues. As my computer went through the process of rebooting from out of the box stage another rep approached me because he could tell that I was upset and not happy. I told he what had happen and he said I think I can help you a little more. He said that I just want to run further testing on you computer for different components to make sure that everything would work properly and pin point any issues. I was delighted with that option. Anything would help at this time especially someone who is willing to help. The first test that he ran was to for the hard drive and he said that since it failed the test the first time could be because the software update glitch and did update correctly which would make the test faulty and be negative. As I sit with finger crossed the test came back as a pass test that my hard drive was not the issue and that the update was the cause and that I did not have to buy a new hard drive. I was happy that the computer was ok but I lost information. All of the updates were done in the store and everything works fine now. If I was not persistent about my gut feeling then I would had left out thinking that I had to pay for a new hard drive that I really didn't needed. Now I can invest that money in a external hard drive to start backing up my information. Lesson learned by I'm still on the fence about things but I hope all is well. I really went through a lot. No help or no service was not an option that I was taken. I hope that it helps.
-
My husband and i have i phones but after the last update our contacts have merged when previously they were seperate, can you help?
You two can share an Apple ID for iTunes and App Store, but you need to set up different iCloud IDs (well only one person needs a different iCloud ID).
On one of the phones go to
Settings > iCloud
scroll down and delete that account.
Now go back to those settings and set up a new ID.
The advantage is that you can still purchase music and apps with the original Apple ID account so both phones can share that information. Only the iCloud information will be separate. However, this also means that calendars, notes, and photos in photostream will not be shared because those are specific to one iCloud account.
More info here.
EDIT:
In the process of setting up the new Apple ID, select the option to create a free @me account. That way, you can also sync your notes.
Message was edited by: Kurplunk -
Afte 2.2 Update I only have the lovely Motorola logo to look at.....
I downloaded and installed Froyo yesterday and got the Motorola logo after the install. I was able to reboot and it worked fine until driving home tonight. I want to know what my options are.. To top it all off I am looking at my **bleep** Backup assistant and it looks like I only have 5 contacts on that dam list. I am extremely unsatisfied. Who do I call to fix this?
http://community.vzw.com/t5/DROID-X-by-Motorola/Updated-now-won-t-boot/td-p/291030
Maybe you are looking for
-
I am trying to submit report program in background job. I want to submit it with specific user name so I am submitting with user name as 'ABC' as below data: user type sy-uname. user = 'ABC'. SUBMIT z_program AND RETURN WITH matnr = mat
-
GarageBand iPad 2 Velocity Sensitivity
Not sure why, but the below discussion was deleted from the Community but it was unanswered, so I'm including the thread below in this message. I am having the same problem, namely, the volume of drums and keyboards in GB for iPad 2 works part of the
-
Direct to shipment to Customer
I have one functional Problem and is as follows My client manufactures machines , that machines consist of several part , some time my client Sales a machine with some part pending . This pending parts can be shipped latter.Some times what my client
-
HT4847 I have apps in my backup on my iPhone how do I release them as usable apps again?
I had all my apps I liked on my iPhone when I was syncing iTunes somehow I thought I had lost them but I had backed my apps up on my phone. So they are in my backup I just want to restore them to my iPhone where I can use the apps. There is a place t
-
Reset Time Capsule Password - Will No Longer Back Up
Any help greatly appreciated. I changed my TC password and now the machine will no longer back up information. If anyone has experienced this issue, advice would be appreciated.