After my phone was fully submerged in water, I'm getting the overheating error message but the phone is not hot at all. Is this the result of the phone being damaged by the water?

I dropped my iPhone 4S in my friends pool. It was fully submerged for about 30 seconds.
We took it out, dried it and put it in rice. After 24 hours I checked the phone. It turns on and runs smoothly. It connects to the computer and syncs perfectly. But after a couple minutes of use I get an overheating error message. But the phone is not hot at all.
Is this the result of the phone being damaged by the water? Is there any way around this? The phone works perfectly fine and isn't overheating at all.
What can I do?

Despite the error that I get after a few minutes, the phone does work fine.
But by most peoples definition, the phone isn't working.
I just want to know if anyone has been in my boat and if the overheat message without the phone overheating can correct itself or if it goes away with sufficient drying of the phone.
I know its slim, but I figured I'd ask.

Similar Messages

When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

Any answers how to fix it? All Im getting is error for the past 3 days!

I can't Start, Uninstall or Install new iTunes. I'm getting the same error message: Window Installer Service could not be accessed. No other programs have similar problem. Any suggestion what can be done?

I can't Start, Uninstall of Install new iTunes. I'm getting the same error message: "Window Installer Service could not be accessed". No other programs having similar problem. Any suggestions how to fix it?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

When I try to sync my IPOD (3rd gen) on ITunes, I receive the following error message - you don't have enough access permissions to perform this operation

When I try to sync my IPOD (3rd gen) on ITunes, I receive the following error message - you don't have enough access permissions to perform this operation..can anyone assist?

See:
iPhone - not enough access privileges: Apple Support Communities

Hi when i switch on the macc 41 files open at once can not open any files while this is happing can still use AI & PS and the internet any help thanks...

Hi when i switch on the macc 41 files open at once can not open any files while this is happing can still use AI & PS and the internet any help thanks...

Are you wanting to stop the 41 files from opening at once or is this intentional? At what point do they open when you power on the mac or when you boot Illustrator? What OS version are you using?
If you can answer the questions above can provide better advice, but you may be running into something similar:
http://www.mactip.net/stop-lion-restoring-previous-files-apps/

HT5100 I was thrilled with this app at first, the content is amazing, but lately I have not been able to open this on my iPad or to download updates. have other user experienced these problems? Is there a setting I can change to make his work again?

I was thrilled with this app at first, the content is amazing, but lately I have not be enable to open the app, or to download updates. are other users experiencing problems like this? Is there a setting I can change that will solve the problem?

I was thrilled with this app at first, the content is amazing, but lately I have not be enable to open the app, or to download updates. are other users experiencing problems like this? Is there a setting I can change that will solve the problem?

Funny, got all the 'Publishing Error' messages but websites get published

Hello all.
I have 3 .mac websites using iWeb.
Last night had trouble publishing, because some "navigation bar error", so I 'publish all', still failed. So every site every page on the left panel is in red.
Brought the Domain file to the office to try and publish, still failed. Mounted iDisk and trash everything, then tried 'publish all' again, still getting some error messages, then tried last try 'publish', reported a network error.
All the icons on the left panel is still in red
*But funnily, a check on my websites and all of them have been published!*
*So how am I going to "update" my iWeb/Domain file, because they are all in red, thinking they are not published yet?*
Cheers

I am having the same problem, after weeks of everything being OK. Suddenly, in the last 24 hours I get a variety of messages, including the "Unknown Error" message and one called "Lock Error". Beats me what THAT is.
When I look at the url with Safari, it all seems to be fully updated, but iWeb certainly THINKS there has been an error, and leaves all the pages that have been altered in any way in the familiar red highlight color.
Trying to contact customer support. Could take a while, of course!
Good luck!, Charlie
Message was edited by: Charlie Morgan
Message was edited by: Charlie Morgan

TS3694 getting a 3014 error message when trying to recover my itouch. All PC software is currect, I have disconnected all USB ports and even turned off all security and still get a 3014 error. I got this after I upgraded to IOS 10.7.0.21

I am getting a 3014 error message when trying to recover my iTouch after upgrading to 10.7.0.21. Everything worked fine until the upgrade.My PC is current with upgrades, I have unplugged all USB connections and I have disabled my firewall security.

Did you try this:
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Also see:
HT4061 error message 3014.: Apple Support Communities

I'm trying to fix the below error message but not get success..

Can someone help me to resolve the following error message..
The error is coming while Update Statistics runs.
Message
Executed as user: \SqlAdmin. ...ssary... [_WA_Sys_00000008_0425A276], update is not necessary... 0 index(es)/statistic(s) have been updated, 6 did not require update. Updating [dbo].[MSreplication_monitordata]
[nc2MSreplication_monitordata], update is not necessary... [nc6MSreplication_monitordata], update is not necessary... 0 index(es)/statistic(s) have been updated, 2 did not require update.
Updating [dbo].[MSsync_states] [ucMSsyncstates], update is not necessary... [_WA_Sys_00000002_0519C6AF], update is not necessary... [_WA_Sys_00000003_0519C6AF], update is not necessary...
0 index(es)/statistic(s) have been updated, 3 did not require update. Updating [dbo].[MSsubscriptions] [ucMSsubscriptions], update is not necessary... [iMSsubscriptions], update is not
necessary... [iMSsubscriptions2], update is not necessary... [_WA_Sys_00000002_060DEAE8], update is not necessary... ... The package execution fa... The step failed.

As v.vt says, the message is truncated, and the actual error message appears to have been lost.
Does this happens repeatedly, or was it only the most recent execution that failed?
Erland Sommarskog, SQL Server MVP, [email protected]

I'm getting the following error message: AppleSyncNotifier.exe - Entry Point Not Found. What do I do?

I recently upgraded the o/s to 4.3.5 but now get the following error message, what do I do?
AppleSyncNotifier.exe - Entry Point Not Found
The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Hi Molly - I can tell you're frustrated and I will do my best
Can you tell me whether you have a 32bit or 64bit system. You can find out in the following way
Windows Vista or Windows 7
If you have Windows Vista or Windows 7, there are two methods to determine whether you are running a 32-bit or a 64-bit version. If one does not work, try the other.
Method 1: View System window in Control Panel
Click Start, type system in the Start Search box, and then click system in the Programs list.
The operating system is displayed as follows:
For a 64-bit version operating system: 64-bit Operating System appears for the System typeunder System.
For a 32-bit version operating system: 32-bit Operating System appears for the System typeunder System.
Method 2: View System Information window
Click Start, type system in the Start Search box, and then click System Information in thePrograms list.
When System Summary is selected in the navigation pane, the operating system is displayed as follows:
For a 64-bit version operating system: x64-based PC appears for the System type under Item.
For a 32-bit version operating system: x86-based PC appears for the System type under Item.
If you have a different OS (operating system) let me know which one and I'll tell you how to find that out.
Once I know I should be able to give you the fix.
Cheers

TS2529 Updating iPhone 4 to IOS 7 and I got the "unknown error" message. I now have a white apple with a line under it on my phone. Help! Do I restart, unplug, head for the Apple store? It's my only phone.

I really don't know what to do. Suggestions?

I had that several times but eventually cleared its self and updated only had to restore one device out of four
That is the price of updating on first day

For weeks I have been viewing a doggy day care via their web cam. This weekend I upgraded to Lion and have been unable to view the center since. I get an error message for java webcam class not found. All of my software is up to date--suggestions?

For weeks I have been viewing a doggy day care center via their web cam. This weekend I upgraded to Lion and have been unable to view the center. I get an error message for Java plug-in 1.6.0_29 ....webcam class not found. Any suggestions on how to fix this?

Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
Regards.

After apparently syncing, I get an 13010 error message and told sync can't work. All songs on iPod but frozen.

I recently noticed that a ton of songs weren't playing all the way through and I tried to sync them up. That led to "restoring" my iPod a few times. Finally able to sync and get all songs and podcasts and photos onto my iPod, but along with an error message that the sync couldn't be done due to an unknown error 13010. The songs are there but I can't do anything with them such as make playlists or even change how they're listed. This is incredibly frustrating as NOTHING has happened to this iPod to cause this to happen.

AND i already tried to delete the iTunes library genius.itdb file!!

I get the following error message when sending mail when NOT connected by WiFi

"Cannot Send Mail
A copy has been placed in your Outbox. The recipient "xxxxxxx" was rejected by the server because it does not allow relaying"
My phone operator is Orange France and my email is Club-Internet (SFR)
Can anybody help please?
MTIA
Paul

Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

TS1424 still getting itunes store error 4002... could not complete your request. This happens 100% of the time when I load iTunes

Every time I load iTunes I get:
We could not complete your iTunes Store request. An unknown error occured(4002)

Same problme for me. no solution found on Google searches.

After my phone was fully submerged in water, I'm getting the overheating error message but the phone is not hot at all. Is this the result of the phone being damaged by the water?

Similar Messages

Maybe you are looking for