After my upgrade to win 10.. (yes I know now!!) no screen.. no start up.. what do I do?

black screen situation.. powers up for a minute or so then just shuts down. What should I do?

Hi Steve366,
Sorry for the late reply but I already answered your other posts. Kindly check the link here: Windows 10 meltdown
Thanks,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

How to restore, reinstall to WIN 7 vers. USB 3.0 Host Controller after driver upgrade to Win 8

After an undate for the Intell USB 3.0 Host Controller (extensible) as a WIN 8 driver update my DynaDock does not work properly for any devices using the USB ports on the dock and connected to any USB port on the HP Envy 4-1043 laptop. Reading everywhere I can find anything it seems that there is a problem with the Microsoft or Intel driver for the USB 3.0 Host such that the USBs work find when things are plugged directly into them. BUT, when the dynadock is pluuged in and any of its 6 USB ports are used the devices either cannot be found or behavior extremely sluggishly.
This Dynadock has worked well with my last 4 HP computers and worked fine under WIn 7 and 8 on this Envy until the last update of the driver.
I do not know how to re-install the old driver (Hps' WIN7 version sp56724. Can someone please give me the steps or refer me to a source to do this properly?
There is no roll back option in the device manager for this driver. It is grayed out.
I have take pride in not experimenting with 'brihg tiddeas' of how to fix things on this machine. Not that 99% of my gut plus resources from help pages and Miscrosoft did not work before. I do not have a backup computer anymore and I cannot afford the lost of time and productive in making a mess and then spending days trying to undo and fix something that I know others have done well.

Windows 8 has native USB 3.0 drivers which explains why you are not seeing an option to roll back. I do not believe you can make the Windows 7 driver work. Have you tried uninstalling in the device manager all usb items and then rebooting to let the drivers reload? Do that with the computer off the dock and then plug it into the dock. As a general rule you should not do driver updates to a laptop through a docking station.

After Mavericks upgrade, I disabled iCloud / iCal connection. Now I can't make any changes to my calendar

I had multiple bad experiences with my iPhone using iCloud and when I upgraded, realized too late, that my computer was now going to be tied to the Cloud. After I recovered from the stress-induced, post-tramatic syndrome from my iPhone / iCloud experience, and verifying that I would not lose all my calendar entries, I disabled the Calendar connection for iCloud in System Preferences. Checked around iCal and nothing looked amiss.
Then I went to schedule a new event. Right click, the New Event window pops up and before I have the opportunity to type, a window pops up with this message: "There was an error saving calendar data. Calendar encountered a critical error while saving to the database, and recent changes may be lost. More information may be available in the console."
And left in my calendar is an entry called "New Event" that I cannot edit (I've tried using the menu as well as clicking). I tried deleting the event with this window popping up: "You can't change events in the "Home" calendar. Only the calendar administrator and any delegates with permission can make changes to read-only calendars. To make changes to the calendar, contact the calendar administrator."
Me, I'm the calendar administrator and sole owner & user of this computer. Theoretically, "Home" should be me, not, as I suspect, some evil remnant of the Cloud sticking around to haunt me.
Question #1 ??? How do I fix this without connecting to iCloud again
Question #2 What is the console and where do I find the information referenced?
Question #3 How do I make myself the administrator, especially when I thought I already was the administrator?
Thank you.
I'm on a MacBook Pro OSX Version 10.9.2

Nevermind. After digging around some more in the Support community, I tried restarting my computer. Problem solved. After the mess iCloud made of my iPhone, it didn't occur to me that the fix would be something so simple for my computer.

HT204053 After i upgraded to the latest IOS 8.3, now my wife gets my calls and I get hers.

I just upgraded my i phone 5S to the latest 8.3 and now my wifes phone gets my calls and mine gets her calls. Not sure where this happened or how to stop it.

Fasform wrote:
I just upgraded my i phone 5S to the latest 8.3 and now my wifes phone gets my calls and mine gets her calls. Not sure where this happened or how to stop it.
This is a feature, part of the Continuity features of iOS 8. If you don't want it go to Settings/Facetime on each phone and turn off iPhone Cellular Calls. It is NOT sufficient to turn off FaceTime; in fact, if it IS off you will have to turn it on to gain access to this setting. You can turn it off after turning off the setting if you don't plan to use it.

Just upgraded to Win 8.1: PSE 11 now will not let me change the paper size and type in the print properties.

I have just upgraded to windows 8.1 but my photoshop elements 11 now will not let me change the paper size and type in the print properties. Also some of the property popup boxes just flash on the screen but do not stay displayed!

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
The D7100 requires Camera Raw 6.5 which is compatible with CS5.
In CS5, click Help > Updates to update Camera Raw to 6.7 and you'll be able to open and edit Raw D7100 NEF files.

Yes I know many have asked the question - but what is the solution ?

Trying to open the PGATOUR.com site I get a "mime type application/x-mplayer2" plug-in not installed - and cannot therefeore run the videos on the site.
What do I do ?
As I just used my money to get my macbook pro (1st mac)it sort of get to me that I get this issue.
All help greatly appreciated !!!

Did you click on the help in the video portion of the page, following is from there.
PGA
"Download The Latest Players
To give you the best possible broadband viewing experience, PGATour.com uses only the latest Microsoft and Real Networks technology.
Either the free Windows Media Player 9+ or free RealOne or Real 10 video player is required to watch video. If you are unable to view PGATour.com multimedia, click on the icons below to download the latest player of your choice.
* Live video not supported in Real
Mac Compatibility
Either Firefox 1.x* (w/ Real only), Netscape 7.2 (w/ Real only) or Safari* (w/ Real only) is required for video playback.
*If Firefox is installed after Real, the playlist will not function; the playlist is not supported in Safari.
Back To Video"
Hope that helps answer your question.
Eme'~[ )
Helpful.. Solved..... Awarding points

No Bluetooh Driver after upgrade to Win 8.1- HP Pavilion TS 11 Notebook PC

Hello,
I need help.
When I bought this laptop it came with Win 8.0 and everything worked fine. But after the upgrade to win 8.1, the bluetooh crashed, and since there its not recognized.
I tried everythig even try to install the drive to win 8.0 but did not work ...
What should I do?
thank you

Thanks paulovpinto. I do not see Bluetooth drivers available for Windows 8.1 for your computer.
HP Pavilion TouchSmart 11-e000sp Notebook PC Drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5396...
This thread has a possible solution, albeit complicated if you are using Ralink Bluetooth in Windows 8.1. See mpw101's post here.
Re: HP Support Assistant - Ralink August 2013 Update:
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/HP-Support-Asistant-Ralink-...
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

NSS Issues After Win10 Upgrade

I have had many of the same issues with the Comcast/Norton Security Suite that have been ID'd in the forum, but have not had a positive resolution. I have tried the downloads numerous times and the installation has failed repeatedly. I have followed the instructions suggested in the threads from "Tazman817" and "USAF", but with no luck. My screen shots are identical to Tazman's, and I have tried both the Norton Power Erase and Norton Removal Tools. I have downloaded the new install from www.norton.com.nss after deleting the Norton folders in Program files. Still no luck. I want to continue to use the Norton product, but after several hours of frustration, I am running out of patience. Are there any other's having these same issues? Are there any other potential solutions? Thank you.

Thanks for the tip, but my experience with Norton was not as successful as yours. I consulted with two techs over four hours (including phone wait time), and they used remote access to delve into the finer points of my system. They used Norton Power Eraser and Norton uninstaller, deleted Norton Program files, and even went into the Registry to make changes. Other than making registry changes, I had used the other tools prior to calling the support line. Based on the Norton Techs conclusions so far, Norton Security Suite cannot be installed on my system after the upgrade to Win 10. I am waiting a few days to find out if they can develop a fix in the future. Until then, I will be using Windows Defender and Firewall, and exploring other options. Too bad, I have liked using Norton's products.

Screen saver no longer working after Lion upgrade.

Hi,
After standard upgrade about 2 weeks ago (mid July 2012) the screen saver no longer works. I mean I can certainly access the application and the desktop can be made to cycle through different photos etc. But when I configure the screen saver it just refuses to go into screen saver mode at all.
I'm not seeing too much occurance of this through the postings which is a bit worrisome as I'd thought this would be a much wider issue.
Cheers,
Herbie

Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472

Message when opening BEx Analyzer after an upgrade to 3.5

When I open BEx Analyzer after an upgrade to 3.5, I get a message:
Internal Error when generating the history. Use a different view
Is this because it is the first time I am logging onto BEx after the upgrade or is this an issue? Thanks

Niten,
As A.H.P suggested what version of BW did you upgrade from ? and what version of SAPGUI are you using - try and reinstall SAPGUI or install SAPGUI6.40 final.
Also please give your front end support pack levels. This could also be due to a front end SP issue.
Some other things that could help would be :
Were there any problems / issues when upgrading ?
Arun
!!!! Oops looks like I posted at the same time as you!!!!
Message was edited by: Arun Varadarajan

Unable to continue activation after i upgrade version

unable to continue activation after i upgrade version in my 3gs who knows how to solve it?

That's almost always because the phone was hacked to illegally unlock it.

My iphone 5 wont reboot again after i upgraded to ios8

My iPhone 5 wont work properly after i upgraded to ios8 all i can see on the screen is apple logo that made it looks like its starting but it wont start up since yesterday please I need help. It's all started after I upgraded to ios8 and after that I noticed that I couldn't send picture messaging to android then I also knew the message settings on my phone that has mms option is not on my phone anymore then I called apple to help me then the lady told me that my ios8 didn't probably install correctly that I should restart my network settings, I did that but it still wont work so I called again the other apple rep told me to reset all settings that everything will come back to normal and immediately I press the reset button my phone went off and turned on after booting for a while but it wont take me to home page but blank with apple logo on it since yesterdays afternoon, I'm really frustrated and ****** ...please kindly help me thanks.
Azeez

My wifes has started to do the same, the iphone 3Gs was mine, I updated it to ios 5.0.1 while still using it and it was fine. I did a backup restore of her old 3G phone and again it was find for awhile.
We noticed she doesnt have any data part of her package so we have switched off the data, since then we have this issue.
I had to install a new docking part of the phone as her mic was faulty, I did the sim out, switch on 3G and data and then sim back in. Switched the phone off and then back on. all good.
I stripped the phone down adn replaced the part. again all good. That I night my wife said Shall she turn the phone off in which I replied it should be fine. When she turned the phone on in the morning, the reboot problem was back.
I'm wondering if the problem is to do with the Data on and off. I've also noticed that when the phone is up beofre it reboots, you can pop out the sim and the signal stays the same.
When it does have a problem, she now does a quick reset from the phone which takes about 5 minutes and shes back up and running. its big pain!
Think I will get her on a data package and then try again

Jdeveloper doesn't start after Weblogic upgrade.

I had Jdeveloper Studio 11.1.1.3 and Weblogic 10.3.3 and everything was working fine. I upgraded WLS to 10.3.4. Now, Jdeveloper doesn't start. jdeveloper.exe doesn't give any error. But nothing happens. We can see the process in Windows Task Manager. Running D:\WLS\Middleware\jdeveloper\jdev\bin\jdev.exe gives following error:
java.lang.NoClassDefFoundError: oracle/javatools/util/Maps$AbstractCacheMap$ReferenceType
at oracle.ide.model.NodeFactory.<clinit>(NodeFactory.java:74)
at oracle.ide.model.Node.setURL(Node.java:562)
at oracle.ide.model.Node.<init>(Node.java:419)
at oracle.ide.model.DataContainer.<init>(DataContainer.java:59)
at oracle.ide.model.IdeSystem.<init>(IdeSystem.java:67)
at oracle.ide.IdeCore.getSystem(IdeCore.java:590)
at oracle.ide.IdeCore.getPreferences(IdeCore.java:600)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1515)
at oracle.ide.Ide.startup(Ide.java:703)
at oracle.ideimpl.DefaultIdeStarter.startIde(DefaultIdeStarter.java:35)
at oracle.ideimpl.Main.start(Main.java:184)
at oracle.ideimpl.Main.main(Main.java:146)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.PCLMain.callMain(PCLMain.java:62)
at oracle.ide.boot.PCLMain.main(PCLMain.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.classloader.util.MainClass.invoke(MainClass.java:128)
at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:189)
at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:89)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:65)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccesorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
at oracle.ide.boot.Launcher.launch(Launcher.java:68)
at oracle.ide.boot.Launcher.main(Launcher.java:57)
Caused by: oracle.classloader.util.AnnotatedClassNotFoundException:
Missing class: oracle.javatools.util.Maps$AbstractCacheMap$ReferenceType
Dependent class: oracle.ide.model.NodeFactory
Loader: ide-global:11.1.1.0.0
Code-Source: /D:/WLS/Middleware/jdeveloper/ide/extensions/oracle.ide.jar
Configuration: boot classpath entry in oracle.ide.boot.PCLMain.BOOT_ENTRIES
This load was initiated at ide-global:11.1.1.0.0 using the loadClass() method.
The missing class is not available from any code-source or loader in the system.
at oracle.classloader.PolicyClassLoader.handleClassNotFound(PolicyClassLoader.java:2190)
at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1733)
at oracle.classloader.PolicyClassLoader.access$000(PolicyClassLoader.java:143)
at oracle.classloader.PolicyClassLoader$LoadClassAction.run(PolicyClassLoader.java:331)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1692)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1674)
... 35 more
IDE boot startup failed.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.classloader.util.MainClass.invoke(MainClass.java:128)
at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:189)
at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:89)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:65)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:54)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
at oracle.ide.boot.Launcher.launch(Launcher.java:68)
at oracle.ide.boot.Launcher.main(Launcher.java:57)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.PCLMain.callMain(PCLMain.java:62)
at oracle.ide.boot.PCLMain.main(PCLMain.java:54)
... 17 more
Caused by: oracle.ide.ExitNotAllowedException
at oracle.ide.IdeCore$1.checkExit(IdeCore.java:241)
at java.lang.Runtime.exit(Runtime.java:88)
at java.lang.System.exit(System.java:904)
at oracle.ideimpl.Main.start(Main.java:199)
at oracle.ideimpl.Main.main(Main.java:146)
... 23 more
Boot startup failed.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:713)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:115)
at oracle.ide.boot.Launcher.launch(Launcher.java:68)
at oracle.ide.boot.Launcher.main(Launcher.java:57)
Caused by: oracle.ide.ExitNotAllowedException
at oracle.ide.IdeCore$1.checkExit(IdeCore.java:241)
at java.lang.Runtime.exit(Runtime.java:88)
at java.lang.System.exit(System.java:904)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:71)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:54)
... 8 more
Didn't get much info on googling. Any help is appreciated.
Thanks,
Vikas

Vikas,
When using JDeveloper, the integrated WLS and ADF version are tied to the JDeveloper version - you cannot upgrade individual bits and bobs like that. There is no problem, by the way, having multiple versions of JDeveloper installed at the same time. I currently have 11.1.1.3 and 11.1.1.4 installed (different directories, of course) with no issues. In fact, I used to have many, many more releases installed, but I decided to clean up ;)
John

Upgraded itunes, now it won't start on OSX.8.5 anyone know how to fix this?

upgraded itunes because it was nagging me, now it won't start.
Mac Mini on OSX.8.5 anyone know how to fix this?
thanks
Graeme

Restart your computer,
Refer steps here to delete SC files:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / Programs n Features / highlight QUICKTIME and click CHANGE then REPAIR.

Playlists Missing After Install New Hard Drive and Upgrade to Win 7

My computer needed a new hard drive and I upgraded from Win Vista Home Premium to Windows 7 Home Premium.
I am trying to get my Playlists back for my iTunes in my "Administrator" user account, after reinstalling iTunes and putting my music libraries back onto my computer.
(I had installed 32-bit Win7 OS myself, computer worked OK for about 1 day, then would not boot up; I took computer to shop, they said I needed new Hard Drive, and I gave them my new Win7 OS computer disks)
I am confused over whether I have 32-bit OS or 64-bit OS. They recommended installing 32-bit OS, I agreed, and believed that I had 32-bit OS installed; however, Computer / System Properties state "System type: 64-bit Operating System"
Prior to my installing Win7, I backed up the following onto my Western Digital "My Passport Essential Portable Hard Drive:"
("My Administrative Account"): Users / Owner / My Music
and
("My User Account"): Users / Yank / My Music
My "Administrative" and "User" user accounts contain different songs in iTunes.
If helpful, I could describe what is in each of these 2 backed-up music folders.
To get started, I copied both my "Owner" and "Yank" user folders in the C: User folder; however now I have "Owner," "Yank," and "Yank.Owner-Toshiba" folders in the C: User folder. I think I did this by creating a new Yank user account by creating a new account, not by my copying a folder into C: User folder. The Owner folder has a picture of a lock on the folder icon.
Because I had trouble merging My Music folders in the Owner folder, and I was confused, I copied everything that was in the Owner folder into a new folder in the Owner folder, "NEW OWNER FOLDER." I also copied my Owner Music folder into several places in my Users / Owner folder.
I also ended up changing the "iTunes Media folder location" several times, using iTunes "Edit / Preferences / Advanced tab / change "iTunes Media folder location". When I chose "Reset," it shows "C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes\iTunes Media"
I've also played around with "Edit / Preferences / Advanced tab / 'Keep iTunes Media folder organized' "
When I open my iTunes, I have no playlists.
However, when I went to my "Yank" user account and opened iTunes for the first time, the playlists associated with that account were visible.
How do I get my playlists back on my Administrative Account, which is my main song collection and had many, many playlists?
Thank you.

YAY!
I didn't try shift-start of iTunes, but I DID GET MY PLAYLISTS BACK BY FOLLOWING YOUR OTHER ADVICE:
I went to my external hard drive, went to my backup at Users / Owner / My Music / iTunes / and searched for library.itl
Four files with that name were found, with different dates.
I chose the most recent, dated just a few days before I made my backup to the external hard drive.
I copied it to my computer's hard drive into the following location:
C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes
which overwrote the file which was located there.
When I opened iTunes, ALL MY WONDERFUL PLAYLISTS WERE THERE!
THANK YOU SO MUCH FOR SOLVING THIS FOR ME!
CAN YOU IMAGINE HOW DISAPPOINTED I FELT WHEN I BELIEVED THAT I HAD LOST ALL OF THE PLAYLISTS WHICH I HAD CREATED OVER THE YEARS? Many of my playlists were composed of whole albums whose songs I had added to iTunes.
THANK YOU AGAIN SO MUCH!

After my upgrade to win 10.. (yes I know now!!) no screen.. no start up.. what do I do?

Similar Messages

Maybe you are looking for