After not using my iPad 3G for a month, I tried to charge it with no success

After not using my iPad 3G for over a month, I turned it on and saw that the battery icon showed a red band and that it needed to be recharged. I plugged in the 10w charger and the battery icon has not shown any progress after 3 hours on the charger. Is it my battery or do I need to be more patient?

The battery symbol will change when it is connected properly.  It will not show the percentage, but a sideways lightening bolt indicating charging.
I tried to charge my new iPad using my PC, because this worked OK for my iPhone, but I now realize PCs do not have adequate wattage to charge the iPad.
Are you certain this is the original charger?
Many wall chargers do not have the wattage intended for the iPad, only for the iPhone.

Similar Messages

  • After not using my macbook pro for 10 days, my wireless mouse no longer works. (I had turned the computer off). I've gone in to mouse preferences but the computer won't recoginize the mouse. It worked fine before the trip. Batteries were changed.

    After not using my macbook pro for 10 days, my wireless mouse no longer works. I had the computer turned off. I've changed the batteries, gone to universal preferences, mouse preferences but the computer won't recognize the mouse. Any suggestions?

    Got it. Thanks. I deleted the mouse (not an apple, but a logitech which has worked fine for me) and then re-discovered it and it's working. Appreciate the advice.

  • TS3694 I forgot my password and could not open until it is said "connect to iTunes". I connected to iTunes. for three hours, I restored it. But it is still not restarted. what can I do? I can not use my iPad 3 for three days. Please help me!

    I forgot my password and could not open until it is said "connect to iTunes". I connected to iTunes. for three hours, I restored it. But it is still not restarted. what can I do? I can not use my iPad 3 for three days. Please help me!

    Try and force your iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.

  • I didn't used my iPad 2 for many months. Last week when I tried to use it, it wasn't charged. Then I put it on charging and again didn't used it for a week. Yesterday, When I tried to use it again it's saying that it is disabled for 22 million mins. HELP!

    I didn't used my iPad 2 for many months. Last week when I tried to use it, it wasn't charged. Then I put it on charging and again didn't used it for a week. Yesterday, When I tried to use it again it's saying that it is disabled for 22 million mins. I treid to restore it by connecting to iTunes but it's not restoring. Kindly Help.

    Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
    Thanks

  • My daughter has not used her ipod touch for 16 months and has forgotten her passcode.  restore factory settings keeps failing due to a software update failure!

    my daughter has not used her ipod touch for 16 months and has forgotten her passcode.  restore factory settings keeps failing due to a software update failure!
    how can i get this ipod reset.  She now has an iphone so this is going to be used by someone else in the family and should be simple to do but itunes just keeps booting it out even though it recognises that it was previously connected to our itunes account as all of the children were on my account

    That has nothing to do with an update server. Do the following:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
      If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes

  • I'm trying to use my iPad mini for the first time with a previous apple ID and password but it will not connect to iTunes but I can download apps from my iPhone using the same appleID and password and it works on my iphone...PLEASE HELP NOW

    I'm trying to use my iPad mini for the first time with a previous apple ID and password but it says "iTunes is not working try again"...it allowed me to download an app on my iPhone using the same apple ID & password but all my apps are in "Waiting Status" on my iPad mini because it says "iTunes is not working"...PLEASE HELP ME NOW!!!

    Previous user installed iOS 7 beta on that iPhone.
    Take it back and get your money returned. You
    are running into a new security feature. Whoever owns
    the ID that it is asking for is the only person who can
    remove the security. That iPhone is worthless to you.

  • I went on iTUnes after not using it for awhile and all my playlists are gone. How can I find them?

    Hi Apple community ---
    I went on iTunes after not using it for awhile and my old playlists are all gone.  My library seems intact, but I don't have a record of  my playlists, except for what's in my iPod.  I'm afraid to sync them to get the playlists back into my computer, becuase the last time I synced my iphone it erased all my contacts from both my iphone and my computer, and I don't want the sync operation to remove the playlists from the iPod as well. 
    I don't have any music on my iPhone, so the two devices in question are just the iTunes program on the computer (it's a Dell with Windows Vista) and my 160 GB iPod classic. 
    Thanks for your help!!!
    Doc E

    This post may be a clearer place to start...
    tt2

  • L7780 poor print quality after not using for 6 months

    Poor print quality after not using my printer for about 6 months.  Ran thru the tools (clean printhead, aligh, etc  . . .) didn't help. Replaced all chartridges, still no help. 
    I'm fairly tech savy, been in IT for 27 years starting with hardware support. 
    Question,  can I manually clean the printheads or should I just replace. I would rather try to clean them manually after just shelling out > $ 170 on new chartridges.
    thanks
    Brent 

    Hi @Brentl 
    Yes, you can clean the printhead and the inside of the printer. The following document will help; 'The Following Printheads are Missing or Damaged, Replace the Printhead' Message Displays on the All....
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

    My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

    Need Help Ye,
    boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it still very slow?

  • After i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    after i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    I am also on my forth hard drive on the same model.
    When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
    I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
    I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct.

  • Ipod freezing after not using it for 2 days

    my Ipod freezes after not using it for 2 days, should i go to the apple store and get a new 1, or is this normal. If i do go to the apple store, i would probably get a nano right since they dont sell mini's anymore

    What do you mean it "freezes". After 36 hours of inactivity the mini will go into 'deep sleep' mode. When awoken from deep sleep, the iPod will appear to reset. Is this what yours is doing? If so, it's normal.
    Also, Apple still has a stock of minis available for warranty claims, so you wouldn't get a nano.
    Cheers!
    -Bryan

  • Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet.

    Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks

    I did not say it is not possible.
    I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
    Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
    Maybe you can get on the Internet over Ethernet.
    You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac).

  • HT1476 ever since I upgraded to ios 7, the battery life is very short and I do not use my ipad all that much.l have been on the phone to apple 3 times, turning off all kinds of things I so not use and have powered off more than before but it is still poor

    ever since I upgraded to ios 7, my battery life is very short. I do not use the ipad all that much and have to charge it twice as much as before. I have been on the phone to Apple 3 times and turned off a number of things that I am not using and now power it off more regularly but still not happy with battery life. It is less than a year old and as I said, I don' t use it all that much

    My best bet would be to restore the phone. Back it up to itunes, and then reset it Factory settings. This way, any corrupt software will be removed, and you can start fresh. Make sure you back it up first. By the sounds of it, you are using the phone for business and probably need the data from it. Hope this helps!

  • How to not  use a credit card for my apple id

    how to not  use a credit card for my apple id

    Check this out it should help:
    http://support.apple.com/kb/HT2534

  • I am trying to burn a music cd on iTunes, but I am getting an error that reads that the cd burner is being used by another application.  I know that I am not using the cd burner for anything else.  I have restarted the Mac and nothing.  Any ideas?

    I am trying to burn a music cd on iTunes, but I am getting an error that reads that the cd burner is being used by another application.  I know that I am not using the cd burner for anything else.  I have restarted the Mac and nothing.  Any ideas?

    One other thread said it was fixed by waiting till prompted by iTunes to insert the blank disk, instead of putting it in first. Does that work? Found a number of hits on this Googling.

Maybe you are looking for

  • ITunes installer installs wrong folder.

    Installer installs iTunes.msi in folder IXP729.TMP in Local Settings/Temp on XP SP3 English, then complains it can't find Local Settings/IXP694.TMP/iTunes.msi, which doesn't exist.  I navigate to iTunes.msi in the folder it just created, IXP729.TMP b

  • HT4322 Why isn't iTunes enabling VoiceOver on my iPod Shuffle (4th gen)?

    I'm using iTunes for Windows 7 64-bit. I have the iPod freshly restored and resynced with my playlist, and I want to enable VoiceOver. I click the checkbox, and iTunes downloads the software. After it's done, however, the checkbox goes blank again. W

  • New DVD Drive not recognized by Itunes? Error 2550

    Hey all, So i go to burn a cd and i get the Disk Burner or Software not found error message. I start doing a little research and I find out that maybe my new optical drive I just bought isn't supported and it tells me to check this i need to go to Ed

  • Duplicate component item in BOM

    Hello Guru, We having problem on the BOM, when we check via CS03 with a change number 111123, item 0050 and 0060 was duplicate. but when we check CS03 without entering the said change number those item was not duplicate. why this is happening when we

  • Is there a way to display timesheet for range of dates for list of employee

    Dear Experts, Is there any way, where  user can view the time sheet data for all employees for a project ? CAT3 is for single employee Se16 cannot be given to the users.  I also tried CATS_DA, report is good, but I am not getting hours .It is showing