After opening and closing 19-20 PDFs in 8.1.6 Acrobat stops working

I have just started getting Acrobat errors '..has stopped working' after opening 19-20 PDFs (individually opening and closing each separately) which causes Acrobat to stop working and displaying PDFs, even any of the 19-20 PDFs, that opened fine beforehand, stop opening. Only by restarting Windows, does it seem to clear this error. I have maintained my updates and patches, on both my Acrobat Professional and Reader 8.1.6.
I am Running Windows XP SP2, with 4Gbs or Memory, and no other programs except for my MS outlook 2007 running. I have MS Office 2007 Professional installed. Something also from Acrobat is interferring with Outlook. Is there an add-on, automatically installed in Outlook for PDF previews? I suspect it might have something to do with the aspect of Acrobat causing the errors and crashing of Acrobat, but I am only guessing. I have also run Antivrus scans on all my PDFs and found no problems with them.

Hi Michael,
Thank you for your suggestion. I did uninstall both, and reinstall Pro, and restarted my system. However, that did not solve my problem. Thank you though.
Sincerely
John M. Shaw

Similar Messages

Mac OS 10.7 Server won't mount DMG's after opening and closing - "Resource Temporarily Unavailable"

I am running Mac OS 10.7.3 Server on Mac Pro 2 x 2.66 GHz 6-Core Intel Xeon with multiple users editing on Avid.
DMG's containing raw camera footage are stored on the server, mounted by connected users on their desktops to allow Avid to access the enclosed data within the DMG's. Recently we've started encountering a problem opening the DMG's after they've recently been opened and closed. After opening and closing a DMG. when we try to open it again from the same user/connected computer or any other user/computer we see an error message saying "The following disk images couldn't be opened" NAME OF DMG "Resource temporarily unavailable". This happened to several users with several DMG's.
We have since restarted the server, which appeared to fix the problem for about a week and now we are having the same issue again.
The only changes made recently have been an update to version 4.2 of our ISIS 5000 which all of the Avid systems edit off of, but I don't beleive that to be the cause of the DMG opening issue. I suspect it might be caused by the Pram still thinking that the DMG's are open when they've already been closed.
Not sure if this is relevant, but we had been running only Mac OS 10.7 systems connected to the server but within the last few months we've been adding several more systems including those with OS 10.8.
Has anyone else encountered this issue? Does anyone know the fix to this problem?
Thanks for any and all help!

Also, we have been able to copy the DMGs to desktops and external drives, which normally would not be possible when a DMG is currently open by another user which is the standard situation in which a DMG would say "Resource Temporarily Unavailable".
After copying to another location, they open normally so we believe it is an issue isolated to the server itself.
Thanks!

Windows handles left open after opening and closing registry key

When I open a registry key with 'Create Registry Key.vi' or 'Open Registry Key.vi' and thereafter close it with 'Close Registry Key.vi', there are 2 Windows handles left open. As my program polls the registry for changes repeatedly, my system crashes because after a certain time of use, no handles are available anymore.
I'm using Windows XP and Labview 8.6.
The VI in the attachment illustrates the problem (reading and writing of values are left out as these have no influence on the problem).
How can I read and write the registry, without leaving open handles?
Ruud
Attachments:
Registry-handles.vi ‏12 KB

Dear Ruud,
thank you so much for your post on our webforum. I noticed that this is a known issue for Labview 8.6, a while ago it was reported with a Corrective Action Request (CAR# 132471). The issue should be resolved with Labview 2009. I wasn't able to reproduce the issue wit Labview 2010, the number of handles stayed arround 28000,
best regards,
Martijn S
Applications Engineer
NI Netherlands
Attachments:
handles.JPG ‏104 KB

Application exits after opening and closing two forms

Hi,
<<This message was also posted on the designer forum!>>
During testing of a migrated application from 6.0 to 6i we found the following (webbased).
Expected behavior:
1 start application, startform opens;
2 select sub-application, startform sub-application opens;
3 select any form, form opens;
4 close form, startform sub-application returns
steps 3 to 4 can be performed many times.
Real behavior:
1 start application, startform opens;
2 select sub-application, startform sub-application opens;
3 select any form, form opens;
4 close form, main startform returns
(this means one level more is closed)
If we now performs steps 2 to 4 the entire application exits, more or less random during any of the 3 steps.
Can anyone explain why this is happening?
Best regards,
Pascal

Frans,
We use headstart version 50. We use the web version with a VMS db-server and a Tru-64 Unix IAS server. And we think that the latter one is part of the problem. Because all modules are ported to Unix a decision was made to use lowercase. Hence all references tot modules (forms, libraries, reports) should also be lowercase.
We are currently checking if this is the case.
Regards,
Pascal

Application extis after opening and closing some forms

Hi,
During testing of a migrated application from 6.0 to 6i we found the following (webbased).
Expected behavior:
1 start application, startform opens;
2 select sub-application, startform sub-application opens;
3 select any form, form opens;
4 close form, startform sub-application returns
steps 3 to 4 can be performed many times.
Real behavior:
1 start application, startform opens;
2 select sub-application, startform sub-application opens;
3 select any form, form opens;
4 close form, main startform returns
(this means one level more is closed)
If we now performs steps 2 to 4 the entire application exits, more or less random during any of the 3 steps.
Can anyone explain why this is happening?
Best regards,
Pascal

Frans,
We use headstart version 50. We use the web version with a VMS db-server and a Tru-64 Unix IAS server. And we think that the latter one is part of the problem. Because all modules are ported to Unix a decision was made to use lowercase. Hence all references tot modules (forms, libraries, reports) should also be lowercase.
We are currently checking if this is the case.
Regards,
Pascal

How to trap opening and closing of adobe print dialog?

I'm working on a asp.net page with dynamically embedded pdf document in it.
I'm using embedded javascript to print the pdf document after a button click and some processing serverside.
As you know print dialog doesn't open immediately and it takes some to open.
And now I'm in a situation where I need to trap opening and closing events of pdf print dialog,
as internet explorer doesn't wait for print dialog to be closed before returning the page control flow to my
script and as a consequence the user will not be aware of opening print dialog and maybe perform other actions
without printing.
Thanks in advance for any HELP!

I'm working on a asp.net page with dynamically embedded pdf document in it.
I'm using embedded javascript to print the pdf document after a button click and some processing serverside.
As you know print dialog doesn't open immediately and it takes some to open.
And now I'm in a situation where I need to trap opening and closing events of pdf print dialog,
as internet explorer doesn't wait for print dialog to be closed before returning the page control flow to my
script and as a consequence the user will not be aware of opening print dialog and maybe perform other actions
without printing.
Thanks in advance for any HELP!

Combine supported files is not automatically opening and closing source applications?

On my Vista 64 machine, suddenly, the "Combine supported files in Acrobat" has begun malfunctioning. Instead of automatically opening and closing the source application (such as MS Word), Acrobat opens the application and then asks to save a new PDF file for each source file and stalls out the conversion. This problem is not happening on my Win XP machine. I have used the 'Repair Acrobat Installation' function but the problem is not corrected.
Thanks for any suggestions.

Just to close out this thread, the bug was fixed with the latest version of Acrobat Pro Extended (9.3.3).

Because once a month acrobat stops working and I have to reinstall

because once a month acrobat stops working and I have to reinstall

Hi Aleotto,
When you say Acrobat stops working then what does exactly happen?
Does it nit launch at all? Do you get any error messages?
What if you try to repair Acrobat installation instead of uninstalling and reinstalling?
Have you checked in a new Admin account and noted the behavior?
Try turning off any Antivirus software you have or add acrobat to its exception list and check.
Regards,
Rave

PDF files opening and closing slowly in Acrobat version 9.5.2.

I am running Acrobat 9.5.2. Last week our server died at work and we converted to a new one. Since then pdf files have been opening and closing very slowly, sometimes taking 15+ seconds to close. Strangely enough, if you open and close several in a row then they usually open and close quickly with some exceptions, but if you wait 10+ seconds and then try to open or close one it takes forever. This happens whether or not the machine is connected to the server.
I tried to do a repair, however it said that it could not connect to the my documents folder at the old server location. When I originally installed Acrobat, it was done through my University and not while I was even connected to my work server, so that is confusing to me. Please help, as I use pdf's constantly and this is really slowing me down.

It doesn't seem like an Acrobat problem per se but a problem with they way your computer is configured to reach the new server. Perhaps you need to have someone come and look at how your computer is configured to reach the new server. It could also be a problem with how the university configured their server. Server issues are something that cannot easily to diagnosed remotely.

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel rec

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Open and closed invoices

hi experts,
I have to capture the parked, open and closed invoices in a report in reference to vendor...
I got the parked invoice condition from the table BSTAT either v or w.
But i am not getting the idea how to capture the open and closed invoices...
Some one suggested me to use the ITEMSET structure but i donno how to capture those values can anyone suggest me how to do it...?
SIRI

Hi,
you can use the same query...Also check the new code after the select..
SELECT BUKRS BELNR GJAHR <b>BSTAT</b>
FROM BKPF
INTO TABLE T_BKPF
WHERE BUKRS = P_BUKRS
AND BSTAT IN ( ' ' , 'A' ) " ' ' - Normal document, A - Parked doc
AND BLART = P_BLART
AND CPUDT IN SO_CPUDT " Selection screen input.
IF NOT T_BKPF[] IS INITIAL.
SELECT BUKRS BELNR GJAHR BUZEI EBELN AUGBL AUGBT
INTO TABLE T_BSEG
FOR ALL ENTRIES IN T_BKPF
WHERE BUKRS = T_BKPF-BUKRS
AND BELNR = T_BKPF-BELNR
AND GJAHR = T_BKPF-GJAHR
AND EBELN IN SO_EBELN " selection-screen input
ENDIF.
LOOP AT T_BKPF.
Parked
IF T_BKPF-BSTAT = 'A'.
    WRITE: / T_BKPF-BELNR , ' - Parked'.
process the next record.
    CONTINUE.
ENDIF.
Check for Open / Closed.
LOOP AT T_BSEG WHERE BELNR = T_BKPF-BELNR
                               AND      BUKRS = T_BKPF-BUKRS
                               AND      GJAHR = T_BKPF-GJAHR
                               AND      AUGBL <> ' '.
    EXIT.
ENDLOOP.
If the return code is 0 then the document is cleared..
IF sy-subrc = 0.
    WRITE: / T_BKPF-BELNR , ' - Closed'.
Else the document is not cleared.
ELSE.
    WRITE: / T_BKPF-BELNR , ' - Open'.
ENDIF.
ENDLOOP.
Thanks,
Naren

7344 servo motion switching between open and closed loop operation

I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
Bob

Jochen,
Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
Bob

Open and Closed Time Outside of the 15 Minute Options

I have a 13 agent Call Center with one CSQ with Skills based routing.
The Call Center closes at 8 pm on Weekdays and 12 pm on Saturday EST. The time of day function only allows me to choose 15 min increments for open and closed. So the Call Center either closes at 8 pm or 7:45 pm. I need to prevent calls from being queued after 7:58 pm on Weekdays and 11:58 am on Saturday. I don’t know how to get around this 15 min restriction. A friend of mine told me that some kind of Java query can be entered into a Boolean variable and then use If / Then statements to check the time and route the call to closed at 7:58 pm and 11:58 am. Any help will be appreciated.

Most commonly used backup methods

Open and closed hand cursors

I have a drag image application and I wanted to use the open and closed hand cursors to move the image about. It seems there is no easy way of accessing these in Java. After searching for cursor names etc.. I decided to hard code the cursors from the .gif image. Also I didn't want the .GIFs as files as this adds to loading problems so I ended up using arrays of pixels that took a little while to enter.
I'm giving you the code if you ever need to use it as I typed it in and wouldn't want anyone else to have to do the same.
int curWidth=32;
               int curHeight=32;
               int curCol;
               Image img;
               int x,y;
               int closed_black[] = { 6,5,7,5,9,5,10,5,12,5,13,5,5,6,8,6,11,6,14,6,
                         15,6,5,7,14,7,16,7,6,8,16,8,5,9,6,9,16,9,4,10,
                         16,10,4,11,16,11,4,12,15,12,5,13,15,13,6,14,14,14,
                         7,15,14,15,7,16,14,16,0};
               int closed_white[] = { 6,4,7,4,9,4,10,4,12,4,13,4,5,5,8,5,11,5,14,5,15,5,
                         4,6,6,6,7,6,9,6,10,6,12,6,13,6,16,6,4,7,15,7,17,7,
                         5,8,17,8,4,9,17,9,3,10,5,10,15,10,17,10,3,11,17,11,
                         3,12,16,12,4,13,16,13,5,14,15,14,6,15,15,15,6,16,
                         15,16,7,17,14,17,0};
               int closed_whiteruns[] = {6,13,7,15,7,15,5,15,5,15,5,14,6,14,7,13,8,13,8,13,0};
               int open_black[] = { 10,3,11,3,6,4,7,4,9,4,12,4,13,4,14,4,5,5,8,5,9,5,12,5,
                         15,5,5,6,8,6,9,6,12,6,15,6,17,6,6,7,9,7,12,7,15,7,16,7,18,7,
                         6,8,9,8,12,8,15,8,18,8,4,9,5,9,7,9,15,9,18,9,3,10,6,10,7,10,
                         18,10,3,11,7,11,17,11,4,12,17,12,5,13,17,13,5,14,16,14,6,15,
                         16,15,7,16,15,16,8,17,15,17,8,18,15,18,0};
               int open_white[] = {10,2,11,2,6,3,7,3,9,3,12,3,13,3,5,4,8,4,10,4,11,4,15,4,
                         4,5,6,5,7,5,10,5,11,5,13,5,14,5,16,5,17,5,4,6,6,6,7,6,10,6,
                         11,6,13,6,14,6,16,6,18,6,5,7,7,7,8,7,10,7,11,7,13,7,14,7,17,7,
                         19,7,4,8,5,8,7,8,8,8,10,8,11,8,13,8,14,8,16,8,17,7,19,8,3,9,6,9,
                         16,9,17,9,19,9,2,10,4,10,5,10,19,10,2,11,18,11,3,12,18,12,4,13,
                         18,13,4,14,17,14,5,15,17,15,6,16,16,16,7,17,18,17,7,18,16,18,
                         8,19,15,19,0};
               int open_whiteruns[] = {9,14,8,17,4,16,5,16,6,16,6,15,7,15,8,14,9,14,9,14,0};
               int pix[] = new int[curWidth*curHeight];
               for(y=0; y<=curHeight; y++) for(x=0; x<=curWidth; x++) pix[y+x]=0; // all points transparent
               // black pixels
               curCol=Color.black.getRGB();
               int n=0;
               while(closed_black[n]!=0)
                    pix[closed_black[n++]+closed_black[n++]*curWidth]=curCol;
               // white pixels
               curCol=Color.white.getRGB();
               n=0;
               while(closed_white[n]!=0)
                    pix[closed_white[n++]+closed_white[n++]*curWidth]=curCol;
               // white pixel runs
               n=0;
               y=7;
               while(closed_whiteruns[n]!=0) {
                    for(x=closed_whiteruns[n++];x<closed_whiteruns[n];x++)
                         pix[x+y*curWidth]=curCol;
                    n++; y++;
               img = createImage(new MemoryImageSource(curWidth,curHeight,pix,0,curWidth));
               closedhandCursor = Toolkit.getDefaultToolkit().createCustomCursor(img,new Point(5,5),"closedhand");
               for(y=0; y<=curHeight; y++) for(x=0; x<=curWidth; x++) pix[y+x]=0; // all points transparent
               // black pixels
               curCol=Color.black.getRGB();
               n=0;
               while(open_black[n]!=0)
                    pix[open_black[n++]+open_black[n++]*curWidth]=curCol;
               // white pixels
               curCol=Color.white.getRGB();
               n=0;
               while(open_white[n]!=0)
                    pix[open_white[n++]+open_white[n++]*curWidth]=curCol;
               // white pixel runs
               n=0;
               y=9;
               while(open_whiteruns[n]!=0) {
                    for(x=open_whiteruns[n++];x<open_whiteruns[n];x++)
                         pix[x+y*curWidth]=curCol;
                    n++; y++;
               img = createImage(new MemoryImageSource(curWidth,curHeight,pix,0,curWidth));
               openhandCursor = Toolkit.getDefaultToolkit().createCustomCursor(img,new Point(5,5),"openhand");
               setCursor(openhandCursor);you need to define openhandCursor and closedhandCursor with your other cursor definitions (I made them default to start with) and then just use setcursor as normal. There must be an easier way to do this!
p.s. thanks to Martin Zvarik for the original code here: http://www.jguru.com/faq/view.jsp?EID=9958

Hi,
you can use the same query...Also check the new code after the select..
SELECT BUKRS BELNR GJAHR <b>BSTAT</b>
FROM BKPF
INTO TABLE T_BKPF
WHERE BUKRS = P_BUKRS
AND BSTAT IN ( ' ' , 'A' ) " ' ' - Normal document, A - Parked doc
AND BLART = P_BLART
AND CPUDT IN SO_CPUDT " Selection screen input.
IF NOT T_BKPF[] IS INITIAL.
SELECT BUKRS BELNR GJAHR BUZEI EBELN AUGBL AUGBT
INTO TABLE T_BSEG
FOR ALL ENTRIES IN T_BKPF
WHERE BUKRS = T_BKPF-BUKRS
AND BELNR = T_BKPF-BELNR
AND GJAHR = T_BKPF-GJAHR
AND EBELN IN SO_EBELN " selection-screen input
ENDIF.
LOOP AT T_BKPF.
Parked
IF T_BKPF-BSTAT = 'A'.
    WRITE: / T_BKPF-BELNR , ' - Parked'.
process the next record.
    CONTINUE.
ENDIF.
Check for Open / Closed.
LOOP AT T_BSEG WHERE BELNR = T_BKPF-BELNR
                               AND      BUKRS = T_BKPF-BUKRS
                               AND      GJAHR = T_BKPF-GJAHR
                               AND      AUGBL <> ' '.
    EXIT.
ENDLOOP.
If the return code is 0 then the document is cleared..
IF sy-subrc = 0.
    WRITE: / T_BKPF-BELNR , ' - Closed'.
Else the document is not cleared.
ELSE.
    WRITE: / T_BKPF-BELNR , ' - Open'.
ENDIF.
ENDLOOP.
Thanks,
Naren

Opening and Closing balances in RG1 register

Hi,
We are facing one issue in RG1 register. When we update and extract the RG1 register from system, its showing Sales Qty and Excise duties properly. But opening and closing balances are not coming, its showing zero there. I checked J_2IRG1BAL table and found that it is also not getting updated. Material comes into stock with 561(initial stock) and 101(from production) movement types but opening/closing balances not coming in either case. Both movement types are activated for RG1 also.
Seeking your help in this regard.....
Regards,
Satyendra Soni

Hi Satyendra ,
For initial upload in RG1 there are 2 tables you need to manually update. J_2IRG1BAL from CIN or SD side. And Accounts to be updated for Balance in J_2IACCBAL.
There are 2 ways for updating balance tables
On last day of month enter Balance in Closing balance field.
OR enter opening balance on 1 st day of month.
Also check Material form P ,can be maintained in user exit for permanent effect.
After updating balances ,
perform any one transaction on system.
and then Extract the Rg1 table .
Ask FI consultant to put in FI JV after balance upload in ACCBAL table.
If you have not done table entries before performing transaction and extraction of RG1 then balances will not appear .
Check with your senior there and use table edit in such case (I hope you are not on production server at the moment) .Then again perform Extraction and check once.
SD FI and ABAP to be present and take decision accordingly.

After opening and closing 19-20 PDFs in 8.1.6 Acrobat stops working

Similar Messages

Maybe you are looking for