After OS Upgrade, System Preferences won't recognize audio input/output.

When I got an iPhone, I had to upgrade to OS 10.5.8, as well as upgrade Safari (to 4.0.3) and iTunes (to 9.0.1) for everything to run smoothly, and it does.
However, since I went though the motions last week with these upgrades, System Preferences or Utilities doesn't want to recognize my audio input/output jacks. It won't recognize when I plug in my stereo or my headphones. I hook up my computer to my stereo all the time to listen to music in the living areas of my apartment, and now I can't because it isn't reading the jack.
Any suggestions? How can I get the system to fix this problem?

Check your Audio MIDI Setup settings.
These are user-to-user forums where everyday folk post questions and offer answers to each other. Apple does not contribute to this message board. None of us has any idea what Apple is going to do until they do it.
If you feel it's a "problem" did you post in the Product Feedback area?

Similar Messages

  • After OS Upgrade, System Preferences won't recognize stereo jack output.

    When I got an iPhone, I had to upgrade to OS 10.5.8, as well as upgrade Safari (to 4.0.3) and iTunes (to 9.0.1).
    Since I went though the motions last week with these upgrades, System Preferences doesn't want to recognize when I plug in the output jack for my stereo.
    I hook up my computer to my stereo all the time to listen to music in the living areas of my apartment, and now I can't because it isn't reading the jack.
    Any suggestions? How can I get the system to fix this problem?

    Obviously, I know it has to do with my computer.
    The reason I posted in the iPhone forum is because I am sure there are many other people who have had to upgrade software on their iMac to support the iPhone, and have subsequently had the same audio loss I have.
    Apparently, such relevance is lost on you, although I'm not sure how it could be;-)
    Thanks for your concern, in any case.

  • Mac Sleep Timer (through 'Energy Saver' in System Preferences) won't work

    Hello,
    I have a MacBook (13-inch, Mid 2009) running Mac OS X Snow Leopard 10.6.3,
    and it has been installed with the latest software updates possible.
    (The latest update is the 'Security Update 2010-003')
    Previously I was using Mac OS X Leopard 10.5 on my MacBook,
    and I can vaguely remember the timed computer sleep through Energy Saver would work.
    That is, when the counter's time matches the amount of time I specified (e.g. 10 minutes), the computer enters sleep mode and displays a pulsing power light.
    After upgrading to Snow Leopard I can barely remember the scheduled computer sleep will work as I don't really notice how it sleeps / I will shut down my MacBook before I go to bed.
    ==========
    However, last night I was really tired and slept in front of my MacBook unconsciously.
    When I woke up, I found that my MacBook didn't display a pulsing power light but a continuously-growing power light.
    I tapped the trackpad and the display turned on, so I knew that my MacBook didn't go to sleep a whole night.
    *What that means is that the Sleep Timer (through 'Energy Saver' in System Preferences) won't work.*
    But the timed display sleep DOES work.
    ==========
    After spending a whole day Googling,
    I found that there are plenty of people suffering the same problem as me, although their Macs and OSs vary.
    I also found an official support page from Apple concerning the related issue:
    Mac OS X: Why your Mac might not sleep or stay in sleep mode
    http://support.apple.com/kb/HT1776
    I tried the following methods but still can't resolve the problem:
    _- boot my MacBook in safe mode_
    _- use the 'Disk Utility' to repair Disk Permissions through booting my MacBook from the Mac OS X Snow Leopard Installation DVD_
    _- reset NVRAM (Intel-based) (as PRAM is used by PowerPC-based Macs)_
    _- reset SMC (System Management Controller)_
    NONE of the above-mentioned methods can resolve the problem.
    Althought I am sure that the Spotlight isn't indexing the hard drive, and I just start my computer and do nothing and wait for the scheduled computer sleep, the scheduled computer sleep just won't work.
    In the other Mac forum, I saw someone suggest installing an application called PleaseSleep:
    http://www.dragonone.com/products/macosx/pleasesleep/
    It works.
    But I really want to find out what caused this problem as this is a function shipped with Mac which is expected to work normally.
    What's more, Apple is claiming to be a green Apple, right?
    ==========
    Here's the log taken from 'Console':
    - Sleep by closing the lid of my MacBook:
    Apr 18 13:21:05 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
    Apr 18 13:21:05 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
    Apr 18 13:21:07 Michael-Leungs-MacBook configd[37]: network configuration changed.
    Apr 18 13:23:21 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:23:21.028 PM - Waketime:4/18/2010 1:23:19.410 PM = Deltatime:1.618421972
    Apr 18 13:23:21 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:23:21.579 PM - Waketime:4/18/2010 1:23:19.410 PM = Deltatime:2.169138968
    Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Clamshell Sleep
    Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - EC LID0
    Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
    Apr 18 13:23:23 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
    - Sleep by manually clicking the Apple logo in the upper left corner of the screen -> 'Sleep':
    Apr 18 13:31:46 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
    Apr 18 13:31:46 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
    Apr 18 13:31:49 Michael-Leungs-MacBook configd[37]: network configuration changed.
    Apr 18 13:32:04 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:32:04.033 PM - Waketime:4/18/2010 1:32:02.720 PM = Deltatime:1.313067079
    Apr 18 13:32:04 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:32:04.589 PM - Waketime:4/18/2010 1:32:02.720 PM = Deltatime:1.869303048
    Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
    Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
    Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
    Apr 18 13:32:06 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
    - Sleep by manually pressing control + eject, and the press 'Sleep':
    Apr 18 13:34:17 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
    Apr 18 13:34:17 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
    Apr 18 13:34:46 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:34:46.080 PM - Waketime:4/18/2010 1:34:44.720 PM = Deltatime:1.360466003
    Apr 18 13:34:46 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:34:46.564 PM - Waketime:4/18/2010 1:34:44.720 PM = Deltatime:1.844347000
    Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 566 ms
    Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: bootpsessiontransmit: bpf_write(en0) failed: Network is down (50)
    Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: DHCP en0: INIT transmit failed
    Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 567 ms
    Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: network configuration changed.
    Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
    Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
    Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
    Apr 18 13:34:48 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
    - Sleep by _turning on the application called 'PleaseSleep' based on the settings from 'Energy Saver'_:
    Apr 18 13:37:22 Michael-Leungs-MacBook PleaseSleep[288]: Application is enabled
    Apr 18 13:37:29 Michael-Leungs-MacBook System Preferences[1136]: * AGCAttach() failed
    Apr 18 13:37:31 Michael-Leungs-MacBook [0x0-0x58058].com.apple.systempreferences[1136]: Couldn't find any matches.
    Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Checking sleep conditions...
    Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Going to sleep...
    Apr 18 13:38:23 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
    Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
    Apr 18 13:38:56 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:38:56.042 PM - Waketime:4/18/2010 1:38:54.720 PM = Deltatime:1.321902931
    Apr 18 13:38:56 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:38:56.571 PM - Waketime:4/18/2010 1:38:54.720 PM = Deltatime:1.850627959
    Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 707 ms
    Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: bootpsessiontransmit: bpf_write(en0) failed: Network is down (50)
    Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: DHCP en0: INIT transmit failed
    Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 708 ms
    Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: network configuration changed.
    Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
    Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
    Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
    Apr 18 13:38:58 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
    - If I disable 'PleaseSleep' and only depend on the non-working 'Energy Saver', nothing happens.
    ==========
    Looking forward to your replies! Thanks in advance!

    Found this discussion by googling "com.apple.systempreferencescouldn't find any matches"...
    One month ago I bought a brand new Macbook Pro 13", and after a couple of weeks I realized it wasn't sleeping on its own when it should, per the system preferences. (I did sleep when I chose "Sleep" in the menus or closed it... It just wouldn't sleep on its own, while open.) What was extra frustrating was that it was intermittent... It would sleep on its own maybe 1/3 of the time, but other times it would NEVER go to sleep. I deleted PowerManagement.plist, reset the SMC, etc... No luck.
    I took it to the "geniuses" at the Apple Store, and the guy took all of five minutes trying to diagnose the problem. When my MBP wouldn't sleep on its own, he promptly replaced it with a new one. That was nice, but I actually would have preferred that he diagnosed and fixed it. (I think the store was so swamped with people coming in for service that day that they were doing anything they could to close cases and get customers out of there ASAP.)
    Now, sitting here with my 48-hour-old MBP, I still have the problem. The other one was so new that I had barely put anything on it yet. The only applications I had put on it were MS Office for Mac 2011, Firefox, Chrome, and Adobe Flash Player. I've put Office and Flash Player on this one, but not yet Firefox or Chrome. That's it. No other customization or fancy business.
    I looked into the Console just now, and I see the "Couldn'tfind any matches" entry popping up again and again. The last three seemed to pop upright around the time when my MBP should have gone to sleep on its own, but not down to the second, so it's hard to definitively point at that and say it's it for sure.
    They need to fix this!!

  • My System Preferences won't let me open accounts?

    My System Preferences won't let me open accounts? I really need it to work please help. Hugz and kissez Abbyxoxo1010

    Hello Makena Little,
    It sounds like you are unable to change your wallpaper background because that section of your System Preferences says that it is loading adn will not finish. I recommend performing a Safe Boot, then leaving it and retesting the issue:
    OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/ht1564
    Starting up in Safe Mode
    To start up into Safe Mode (to Safe Boot), follow these steps.
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key.
    The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
    After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
    To leave Safe Mode, restart your computer without holding any keys during startup.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Many of my System preferences won't load in mavericks?

    Since updating to 10.9 many of my system preferences won´t load. These are:
    - Security: You can’t open Security & Privacy preferences because it doesn’t work on an Intel-based Mac.
    - Notifications: Could not load Notifications preference pane.
    - Printers & Scanners: Could not load Printers & Scanners preference pane.
    - iCloud: Could not load iCloud preference pane.
    - Internet accounts: Could not load Internet Accounts preference pane.
    - Networks: Could not load Network preference pane.
    - Sharing: You can’t open Sharing preferences because it doesn’t work on an Intel-based Mac.
    - Users & Groups: You can’t open Users & Groups preferences because it doesn’t work on an Intel-based Mac.
    - Parental Controls: Could not load Parental Controls preference pane.
    - Date & Time: You can’t open Date & Time preferences because it doesn’t work on an Intel-based Mac.
    Any hints on a solution are greatly appreciated!
    Best regards, Mikkel

    To further explain:
         I didn't need to locate any invisible files in my case.  I discovered that I had 4 versions of the System Preferences application on my computer.  (The System Preference applicatioin is what loads the preference pains when you seledt System Preferences.)  I merely searched for "System Preferences" in spotlight.  Spotlight located 4 different versions of the System Preferences application. Some of those versions apparently tied to preference panes that used the old 32 bit encoding from the non Intel processor days.  When I clicked on the System Preferences under the Apple menue it was apparently pulling up an old version of the System Preferences applicatioin instead of the correct one in the main Applications folder.  I also noted that if I clicked on System Preferernces in the dock or directly in the the Applications folder, I would not have the problem of some of the preference panes not able to be viewed because of the " "it doesn’t work on an Intel-based Mac" message.  So I surmised that the correct System Preferences application was in the Applications Folder on the top level of the drive directory like it was supposed to be but that when I clicked on System Preferences from the Apple menue it was loading one of the 3 old System Preferences applications that were buried elsewhere on my hard drive.  If you find you have more than one System Preferences application on your hard drive you need to trash the other System Preferences Applications.  Before trashing the duplicates, you should test the one in the main Applications folder by directly double clicking it and make sure all the preference panes in it work properly then trash the duplicate System Preferences applications you found in spotlight.
         You may also find like I did, that you not only have duplicates of the System Preferences on your hard drive but also several old duplicates of the entire Applications folder buried on your hard drive. if that is the case you should compare each folder and make sure there is nothing in the old duplicate Applications folders you still need.  You will probably find that all of the latest versions of your applications are in the main Applications folder where they should be.  If so then trash all the old duplicate Applications folders as well.  Keep only the main Applications folder on the top level of the hard drive.
         Trashing all these extra old Applications folders that held old duplicates of all my applications in them on my hard drive solved a bunch of other problems I was having with some of the applications as well.
         For the technically minded:  Why does this happen with Mavericks and not with Mountain Lion?  I suspect that the old Applications folders and old duplicate System Sreferences applications didn't matter to Mountain Lion because it searched for the System Preference application under the Apple menu differently than Mavericks does.  I believe Mountain Lion seached all the top levels of the Application folder before drilling down into any subfolders to find the System Preferences application.  Mavericks apparently does it the opposite way.  It searches the first subfolder in you Applications folder and drills all the way down in that subfolder first before going to the next subfolder and drilling down in that subfolder all the way to the bottom.  So it searches all the subfolders before searching the main level of the Applications folder for System Preferences.  Since my old duplicate System Preferences applications where in subfolders with titles that were earlier in the alphabet than the main System Preferences application it searched those subfolders first, found the old System Preferences application in the those earlier folders and loaded the old System Preferences first in the subfolders instead of the correct one further on in the main Applications folder.  If any one else has a better idea let me know.
    --Scott
    micmac2105 wrote:
    Hello,
    have the same problem, however, I do not understand the hint for solving the problem.
    How to show invisible files?
    How to find applications/system preferences and call Get info from file menu?
    Where are all these things, have never seen them before or heard of them.
    Thanks for help
    Michael
    micmac2105 wrote:
    Hello,
    have the same problem, however, I do not understand the hint for solving the problem.
    How to show invisible files?
    How to find applications/system preferences and call Get info from file menu?
    Where are all these things, have never seen them before or heard of them.
    Thanks for help
    Michael
    micmac2105 wrote:
    Hello,
    have the same problem, however, I do not understand the hint for solving the problem.
    How to show invisible files?
    How to find applications/system preferences and call Get info from file menu?
    Where are all these things, have never seen them before or heard of them.
    Thanks for help
    Michael

  • My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?

    My system preferences won't load. It opens straight up to the desktop folder and pictures won't load, leaving me with a color wheel. I've tried restarting my computer and that doesn't help. System preferences just won't open/load at all. Any ideas?

    Deleting the System Preference or other .plist file
    ..Step by Step to fix your Mac

  • After I click system preferences to change my screensaver, it will say loading images and the cursor will be loading. How do i fix this ?

    After I click system preferences to change my screensaver, it will say loading images and the cursor will be loading. How do i fix this to be able to change my screensaver and not have my computer do this?

    Try system preferences>desktop,click desktop tab. Click the Apple folders, iPhoto, or folders. Click the pic you want on the icon, it should put the pic as your wallpaper. You can change the picture if you change picture if you click it and the time.  Unless I don't understand your question.  ATB

  • Yosemite upgrade - Bluetooth now won't recognize LG Tone

    Yosemite upgrade - Bluetooth now won't recognize LG Tone, won't appear on discover list, what now...?

    What are you trying to do?
    Barry

  • Am trying to record a basic guitar track while I sing along.  I don't want my vocals to be recorded at the same time but the internal mic seems to be picking up the vocal and guitar sounds.  I tried System Preferences, Sound, Line In - Audio Line Input.

    I am trying to record a basic guitar track while I sing along.  I don't want my vocals to be recorded at the same time but the internal mic seems to be picking up the vocal and guitar sounds.  I tried System Preferences, Sound, Line In - Audio Line Input.  It seems to be a common problem in Garageband for the Mac, ipad and iphone. 

    for me it turned out that the jack into the iMac was loose.  Once I fiddled with it everything worked okay

  • System Preferences won't save after change

    Hello everyone,
    I am running Mac OS 10.5.8 on a Black Macbook. The problem I am having is that none my changes will save in the system preferences. For example. I change the desktop background but the background won't change. The display window in the systems preferences window will show the picture I chose, but the desktop won't.
    Another example: if I turn off "spaces" in systems preferences. It will show as off in the system preferences window, but as soon as I close the system preferences window, the changes won't take affect. This seems to happen with any change to settings in the system preferences.
    I have recently used both "disk warrior" and Onyx to rebuild my desktop, check my drive and everything else those applications do. But still no change.
    One more hint: I deleted an application (TomTom home) from my computer a few months ago, but the old icon shows up in the Dock as a "?" after each restart. I can drag it ot the desktop and delete it, but if I restart it will always show up.
    What could be wrong? Should I do a reinstall? I don't have the disks...
    Thanks Mac folks!

    Ok, I tried both removing the "com.apple.systempreference.plist" and restarting from both a Disk Warrior disk, and the Mac OS X Install CD 1 and doing a repair of the disk permissions. Neither of the tricks worked.
    I no longer have a "com.apple.systempreference.plist" file anywhere on my computer and I still have the same problems.
    So what should I do now? I have (obviously) found my original disks. I am thinking I need to do a new install of the system software? What is the process for doing that and not lose my data?
    Thanks again for everybodies help.
    Josh

  • HT200100 Just upgraded to 7.4 and system preferences won't launch. Any suggestions?

    I've just upgraded to Lion 7.4 and the individual system preferences panes won't launch. Any suggestions?

    I am having the same issue. Users folder also seems to be locked.

  • System preferences won't "stick" after archive & restore

    Because my OS10.3 appeared to be damaged, I did an archive and restore using the OS10.2.3 disk that came with my computer. After the restore I find that I cannot get any changes I make to the system preferences to stick. For example, with "Energy Saver" the preferences, after restore were "custom" and the "show battery status" was unchecked. I unlocked, using my account ID and password, changed the settings to "presentation", checked "show battery status", and locked. Nothing changed in the menu bar and when I restarted, the Energy Saver preferences had reverted to the initial ones and was unlocked. This problem is particularly bad because I can't change the network preferences and get back on the Internet through my airport system. What did I do wrong?!
    LarryNM

    Oh I see. I guessed wrong then. Unfortunately I neither use 10.2 nor Airport so lacking the personal experience to help you, may I suggest also posting in the Airport forum, as someone there may be able to get you more quickly online. Here is the link,
    http://discussions.apple.com/forum.jspa?forumID=1011

  • Just upgraded to Mavericks and now System Preferences won't open (error -1712); suggestions about what to do?

    Just upgraded from Lion to Mavericks.  Free download, install and reboot went fine.  When I go to System Preferences to customize the desktop, etc., I can't open it.  Error number is given as -1712.  Anyone else had this problem?  Any suggestions about how to fix it?  Thanks!

    Get onto the App Store and download/purchase the Mavericks version of iPhoto.

  • System Preferences won't launch from Apple menu in Mac OS X 10.5.8

    Hello there,
    I recently upgraded to 10.6 and then went back to 10.5.5 in a few hours.
    When doing so, I chose to save a folder called "Previous System", as the Installer gave me this option.
    I've upgraded to 10.5.8 via Software Update, after prior 10.5.5 installation through the DVD.
    At some point, I tried to launch the System Preferences through Apple menu and got the familiar message: "The application quit unexpectedly, etc.". Since then it's a recurrent problem. It's been 3 days.
    However, it does open from the dock icon.
    I still have the "Previous System" folder on my disk. I've moved a few things from it to my Library (i.e. some minor applications like Skype, some Desktop items like documents and folders, some photos, music, etc.). I've pretty much started from scratch with everything else - Finder preferences, Wacom tablet driver, etc.
    Any clues? I've seen someone had the same problem with a downgrade from 10.5.8 to 10.4, but it's still a mystery as well.
    Thanks in advance!
    --

    iyacyas wrote:
    Try repairing permissions from Disk utilities...
    Hey iyacyas, thanks for suggesting the disk permissions repair. I tried this, but it didn't work out.
    I'm far from understanding any of this, but I tried to figure somethings out from the Report the crash sends to Apple and I noticed that it's trying to launch the "System Preferences" from the folder "Previous Systems"… gee!
    Here it goes, in their own words:
    Path: /Previous Systems.localized/2010-01-17_1147/Applications/SystemPreferences.app/Contents/M acOS/System Preferences
    Anyone has any ideas how could I fix this? I mean, "tell" the Apple Menu to search for the System Preferences inside my ACTUAL Applications folder?
    Thanks!
    --

  • System preferences fails to recognize a new ext. HD to which my MacPro has been cloned (with SuperDuper). I want to check to be sure that it will function as a start up disk.

    I have a new 3 TB Western Digital ext. HD. I used Super Duper to clone my MacPro HD to the ext. HD. I want to be certain that I can use it as a Startup disk in an emergency. To test this, I wanted to restart with the new drive as the startup disk.  The disk image is on the desk top and the computer recognizes it but in System Preferences>Startup Disk, it does not appear. Any ideas?    Mid 2010 MacPro w/ Yosemite 10.10.1
    System Report>System Info>Storage lists the new ext. HD but System Preferences>Startup disk does not show it.
    Many thanks.

    I did not see anything about GUID there. I formatted with Disk Utility as Mac OS Extended (Journaled) but I think I erred there. On the left column, there is a list of items. Next to the bottom, it lists my HD on 2 lines. On the very bottom line, after an indent, the HD is listed once again. I selected the indented lower line to clone to. I'll bet that I should have selected the upper line.
    When I click on the upper line, Disk Utility blank space after "Format" fills in with MS-DOS (FAT).  I'll change that to Mac OS Extended (Journaled) and clone to that line selection.
    You gave me the idea to re-check Disk Utility and recognize what I think was my error. However, I am not going to prove that. I shall install Yosemite on the ext. HD and go from there.  I never would have thought of that. Thank to y'all and that includes LINC.  Great help!

Maybe you are looking for

  • Hot to display checkbox in table control

    hi all, i am displaying table comtrol. in my table control i have one field,name of the field is Inactive. in this field i have to show chckboxes. anybody can send me the code please. thanks, maheedhar.t

  • User only application Folder - Dockulicious

    I just noticed there is no application folder for just the user. Can I just set one up and place applications in it that only I have access to. Will this effect how the program performs? I was looking at the Dockulicious Docks apps which is really co

  • VS15 + IoT: Error when creating project

    Hello everyone! I'm facing a problem that I don't know how to fix it when creating a project of type "Windows IoT Core": I followed step by step the program for IoT. Anyone have an idea? Thanks in advance. Mafyou. Cordialement, Mafyou.

  • Problem with server side state saving ,JSF 1.1.1

    Hello, In my web.xml  the.STATE_SAVING_METHOD setting is s server <context-param>         <param-name>javax.faces.STATE_SAVING_METHOD</param-name>         <param-value>server</param-value>     </context-param> for measurement of application security

  • SetWindowsHookEx(WH_JOURNALRECORD) is hanging the system on Windows 7 and Windows 8

    I'm in the process of porting an old application that uses the Journal Record Hooks to record macros to Windows 7/8. I've done everything that needs to be done to make this works, that is : set uiAccess=true in the manifest sign the application with