After OS upgrade to windows 2008 R2 x64 Dispatcher stopped by error

Hello everyone,
I am facing a problem after OS upgrade (from Windows Server 2003 Standard R2 x64 to Windows Server 2008 Standard R2 x64), Solution Manager 7.0 EhP1 on DB2 v9.7 FP4.
When I start SAP using mmc console after awhile Dispatcher stops.
When I wrote R3trans -dx in CMD:
D:\usr\sap\ASM\DVEBMGS00\exe>r3trans -dx
This is r3trans version 6.14 (release 701 - 19.01.11 - 11:44:00).
unicode enabled version
r3trans finished (0000).
The contents of [dev_w0|http://pokazywarka.pl/p9udr9/], [std_dispatcher.out|http://pokazywarka.pl/wgpsfx/] and[ std_server0.out|http://pokazywarka.pl/a5xsp0/]
I found an error in dev_w0:
[IBM][CLI Driver] SQL1531N The database alias "ASM" could not be found in the db2ds
C &+ driver.cfg configuration
And the Note: 1564507 - DB6: SQL1531N alias "<DBNAME>" not found in db2dsdriver.cfg
Contents of db2cl.ini:
; Comment lines start with a semi-colon.
[ASM]
Database=ASM
Protocol=tcpip
Hostname=sapsolman
Servicename=5912
[COMMON]
Diagpath=
sapsolman\sapmnt\ASM\SYS\global\db6\db2dump
Someone have any ideas how to fix Dispatcher ? I can attach any log files, if necessary.
Best regards,
Kamil

Hi,
Well unfortunately, do not think its possible to fix it. We once had a similar situation with SAP system on MSSQL on Windows Server 2008. It was only an ABAP system so after a lot of hit and trial we got the system up. And would not get any support from SAP incase of future errors.
But for Solution manager this really would be complex because of the Java part. Do you have the backup before OS upgrade?
Would recommend a restore and migration as supported by SAP.
Regards,
Srikishan

Similar Messages

Mac os x wiki server can't authenticate user password from active directory recently after we upgraded to windows 2008 server.

after upgraded to windows 2008 server, our mac os x wiki server can't authenticate user password anymore. How can I re-bind the wiki server to the AD again? thanks in advance.

Solved it by deleting the user and creating a new one with the same userID.
Maybe it occured because I marked the "user has to change password after first login" box when resetting the password but didn't yet allow him to do so in the webpages menu?!?

Best practice for installation oracle 11g rac on windows 2008 server x64

hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christian

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Certification for Windows 2008 R2 x64

Hi,
My customer wants to know if OEM 11g Grid Control R1 is supported to be installed (Repository, OMS and Agents) on Windows 2008 R2 x64. Repository will be on DB 11gR2 to monitor OFMW 11gR1 components (11.1.1.3) which are running with Sun JDK 1.6 64-bits).
Certification Matrix (Doc ID 412431.1) in My Oracle Support seems to be not updated as it does not shows OMS 11g, only OMS 10gR3 and R2 are available.
Is there a date for this support/availability?
Thanks,
Fernando.

My customer wants to know if OEM 11g Grid Control R1 is supported to be installed (Repository, OMS and Agents) on Windows 2008 R2 x64. Repository will be on DB 11gR2 to monitor OFMW 11gR1 components (11.1.1.3) which are running with Sun JDK 1.6 64-bits).
OMS 11G is not available for Windows 64 bit. However you can use 64 bit windows for repository databases.
Certification Matrix (Doc ID 412431.1) in My Oracle Support seems to be not updated as it does not shows OMS 11g, only OMS 10gR3 and R2 are available.Please select 11G OMS from the dropdown , certification information for 11G is also available in the note.
Is there a date for this support/availability?Please keep checking otn.oracle.com for availability.
Regards
Rajesh

Jinitiator & IE8 On Windows 2008 R2 x64 Server - Please Help!

Hello All -
I am wrapping up configuration of a Citrix Xenapp server for a presentation to my manager. The ONLY thing that I cannot get working is jinitiator for our Oracle apps. It is running on IE8 on WIndows 2008 R2 x64.
I have done a lot of research and replace jvm.dll from Java, but haven't been able to get that to work. My guess is that it's either because I'm downloading the incorrect version of Java (which I extract the .jvm file from) or that i'm running x64.
Please give any suggestions to help. I've spent hours on this project and if I cannot figure this out and have to go back to a different version of OS, then it's all lost -
Thanks!

801574 wrote:
Great - Thanks.
Will this need to be something that it installed/configured on my machine with IE8 installed or will changes need to be made to the actual Oracle server? We don't manage the server so hopefully it will be the client end.
Thank YouAs long as you have the necessary version of JRE installed, you should be good. Necessary application changes/configuration must be made in order for it to use JRE.
Srini

Upgrade to windows 2008

Hi all,
we currently have our SAP systems running on windows 2003 64bit MSCS and SQL 2005. We want to upgrade to Windows 2008. We fulfill the pre-requisites for upgrade.
i know the simple way would be to install windows 2008 on a fresh system and them perform a system copy but this is something which will take a lot of time.
Now when we try and perform a upgrade to windows 2008 on the existing systems, it breaks the cluster, when we recreate the cluster, the SQL and windows services are lost, is there a way to save these groups or we need to recreate them(manually or reinstall)
Any best practices
Yogi

Hi John,
We plannng a preparing for a similar task
Taking ECC 6.0 from win. 2003 sql 2005 64bit Unicode to win 2008 , sql 2008 same, migrated to NEW servers.
Please provide advice ...
I will need to order new DVDs? will I be able to install sql 2008 using vbs file , as i have researched and it indicated that I will need to install from scratch?
We are doing our entire SAP landscape (ECC, BI and Portal)
Then we are also implementing cluster(failover, LB ) for the production servers.
Will I need to install SAP / SQL for DEV/QAS in any special way for them to interface to Production which will be clustered?
Any advise will definitely be helpfull as I go thru my research and planning
Kind Regards,
Maria

Will i have to reinstall all factory software after i upgrade to windows 10?

just needed to know if i had to restall the HP software than came on tablet after i upgrade to windows 10? and if i have partitioned another drive on existing drive will it stay as well?

Linking to self-contained plug-ins via a shortcut can be a good way to keep things organized, but be aware of one thing:
Many plug-ins today are not truly self-contained, but actually install additional things like DLL files into the Photoshop installation area itself (something I regard as a bad practice). What this means is even if you are to link to another place from the plug-ins subfolder under the new Photoshop CC (2014) installation area, your plug-ins may not all run properly. If they have an installer, your best approach is to use the installer.
-Noel

B&O Equalizer Software missing after the upgrade to windows 10

After the upgrade to windows 10, the pre installed B&O Equalizer software is missing. Besides after i installed the audio driver provided by Hp Support , the sound quality and the level are degraded.
I am unable to find the software. Help

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion 15-ab029tx Notebook and issues with Bang & Olufsen Equalizer Software. Try using the Windows Update Troubleshooting tool to fix the problem.Here is a document that shows how to update drivers that are not working correctly with Windows 10.I hope this helps. Thanks.

My iPhone 4 will no longer back up in iTunes after my upgrade to Windows 7 64bit.

I used to have Windows XP 32bit and everything worked fine.
I upgraded to Windows 7 64bit and installed iTunes 64bit (I've also tried running the installer as administrator [in the compatibility properties]).
iTunes will recognise it with no problems and I can drag and drop anything I want to the iPhone, but I can't back up.
Software versions: iTunes v10.4.0.80, iPhone 4.3.5.
When I try to back up, the loading bar with either:
Have a loading bar with diagonal lines forever or,
it will start moving and freeze.
I've tried leaving the process for hours, but to no avail.
While the back up is being attempted, iTunes still retains full functionality.
I would exit by sliding the bar on my iPhone (iTunes will retain the loading bars as if frozen) and then unplug it. At this point iTunes takes a few seconds to drop the loading bar altogether, and the little screen will reset to normal functionality.
I believe this may be a iTunes-Windows thing as I did the following with my old laptop (Windows XP 32bit):
Installed iTunes for the first time.
Went into preferences and disabled the automatic backup option.
Plugged in the iPhone, right-click "back up".
The back up took less than 5 minutes.
I don't understand why my main PC can't back up my iPhone.
Can anyone help please?
I've tried researching the same problems and I've ended up doing the following:
Reinstalling iTunes,
Tried changing the iTunes installation folder to "Program Files" instead of "Program Files (x86)",
Deleting all contents from: "C:\Users\[Username]\AppData\Roaming\Apple Computer\MobileSync\Backup",
Deleting the apps from my phone in case there are corrupt apps (doesn't make sense though as it backed up fine on my old laptop).
I would appreciate any suggestions!
Kind regards,
Will

Hi there,
I have the same issue. Usually hangs after 10K od sometimes after 18MB of backup file.
Config: iTunes 10.4., Win 7 64bit, iPhone 4 with iOS 4.3.3
I tried all of these without success:
- deleted backups via iTunes / Preferences
- deleted backups from sync folder
- created a new admin user and tried to sync
- reinstalled iTunes
- ran all Windows updates, restarted, reinstalled iTunes
- ran iTunes / Diagnostics (says everything okay, only info which is strange: diag says I am not a admin user, which is not correct)
Nothing helped. Who can help. I hope someone from Apple can take care, as I seem not to be the only one. Actually iTunes is the worst part about iPhone. Hope with iOS 5 and Cloud sync to get rid of iTunes.
Any hints welcome,
Cheers,
Miguel-KA

Web Pages do not display after new installation on Windows 2008 64 bit

Hi All...
Environment: Window 2008 64 bit.
Installing: Latest WebTools compatible with 64 bit.
Installed: 2.0 asp.net
After installing webtools in this environment we attempt to register/request the license.
After clicking on the request - windows prompts you to open.
If you attempt to open, you are asked which program to open with...?
That seems odd.
At this point this is all I have and am stuck as the system is inaccessible.
Rob.

Bryce...
This did help.
Also - I discovered that the webserver was not previously connected to the domain and was not inheriting permissions.
Steps Taken:
Uninstalled the IIS and ASP Roles from the web server as local server administrator.
Joined web server to domain.
Added the IIS and ASP Role.
Re-installed webtools.
Registration launched - no exceptions.
Gracias.
Rob

In-place upgrade from windows 2008 R2 to windows 2012

Hi all,
we are currently running SAP ERP EHP7 (Netweaver 7.40 ) on Windows 2008 R2 server, MS SQL 2012 database.
Is it possible to do in-place upgrade to Windows Server 2012?
We want to do upgrade without buying new hardware and perform system copy.
Regards

Hi,
the only note where we discussed our findings about in-place upgrades of the Windows operating system is SAP Note 1494740.
Even though the upgrade to Windows Server 2012 is not discussed explicitly, the note is also valid for Windows Server 2012.
The only thing you have to take care is: upgrade your system components (database, other 3rd party software) to versions supported on Windows Server 2012 before you are performing the in-place upgrade.
Regards
Peter

Windows 2003 SP2 servers migrating from IIS 6.0 to IIS 7.5 without upgrading to Windows 2008 R2

I have 3 Windows 2003 SP2 servers running IIS 6.0 and my client wants to upgrade to IIS 7.5 without having to upgrade the OS to Windows 2008 R2. Is this possible?
Thanks

No I'm afraid not. The full versions of IIS depend on the OS, so IIS6 on 2003, IIS7 on 2008, IIS7.5 on 2008 R2.
The Express version of IIS can be installed on 2003 but that's for developers only so no use in your situation.
Also worth nothing in terms of upgrading, unless your 2003 installation is 64-bit then you can only do an in place upgrade to 2008 IIS7. There's no 32-bit option with 2008 R2, and no way to do an in place upgrade between 32-bit and 64-bit, so if you really
need to upgrade to IIS 7.5 then your only option would be to start with a new install and then migrate the websites from one server to another.

After security updates on Windows 2008 R2 ping returns ipv6 ip addresses

After installing the updates shown on screenshot attached the server running windows 2008 r2 returns IPv6 ip addresses when pinging any device. Also Public Folder got populated with many icons that were not there. This is a server running terminal and
rdp services. Please help me identify which update may be causing this issue

This one may help.
How to disable IPv6 or its components in Windows
or alternately you can
ping -4 {ipaddress}
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Windows 2003 Upgrade to Windows 2008 on MSCS

Hi ,
We were running our NW 7.0 ABAP+JAVA system on Windows 2003 and SQL 2005 . Somehow in some misscommunication the Network administrator has formated the system without taking the OS level image backup . This is our production system .
We did not take the system export before that .
Here is the situtaion :
He has detach the database and SAN . Install Windows 2008 and SQL 2008 . after this we have attached the database and SAN both ,
Now do we need to delte all the old SAP installation files from the SAN or we can just install the Central Service Instance and we will be good ? Do we need to do the rest of the instllation like Database Instance installation ,First MSCS Node ,Additional MSCS node etc...
What is the best way to install the SAP system on it with all the data . We have the data files and system files available with us .
Appriciate your quick help on this .
Thanks ,
Bhanu Pratap Singh

Hi orkun,
That is what i was thinking but SAP is not recommending this and asking me to Go back to Windows 2003 and SQL 2005 and install SAP their from Scratch .
They are not suggesting to install SAP on windows 2008 and restore the database .
Thanks ,
Bhanu Pratap Singh

Window 2003 upgrade to window 2008 R2 for Moss 2007

I am currently running Moss 2007 on window 2003 32 bit. I need to move it to 2008 r2 64bit.
currently 1sql, 1webapp
i plan to add 64bit webapp(running window 2008 r2 64bit) to the farm, then remove the 32 bit webapp. here are my question
is that an ok approach since msdn recommend remove sql server first?
patch? does it have to be the same level? do i install 64 bit patches on win08 R2 or 32 bit? I am assuming 64 since i am running 64 bit window?
what about custom web part, fab40? do i need to redeploy?
Anyone have step by step instruction?

Refer to the following MSDN article
https://technet.microsoft.com/en-us/library/dd637753%28v=office.12%29.aspx?f=255&MSPPError=-2147217396
Also refer to the following article on best approaches to upgrade.
http://www.go4sharepoint.com/Forum/best-approach-upgrade-moss-2007-windows-22904.aspx
And yes, you need to migrate your custom web part and fab40 template manually by redeploying.
Cheers,

After OS upgrade to windows 2008 R2 x64 Dispatcher stopped by error

Similar Messages

Maybe you are looking for