After os5 upgrade the iPhone battery drains in 1 hr
after os5 upgrade the iPhone battery drains in 1 hr? Gets very hot also
And I should mention that I took the foll steps so far:
1. Let the battery drain out completely and charge it overnight
2. Backed the phone, then reset the phone and restored from backup.
3. Took it to the apple store and they did a different kind of restore but no luck
The only thing left for me to try to is to reset it to factory setting unless some one can suggest some other way.
Similar Messages
-
I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!
You did turned in Settings > General > Usage > Battery Percentage: ON?
Try a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data -
Iphone battery draining fast after reboot
hi, my iphone battery drains completely from 100% to 0% in a few hours if I switch the phone off and turn back on. i recently found this out once after I switched off the phone.....But there is no problem (battery can last 1~2 days for normal use)if i do NOT switch off after recharge.
Is this a software issue or hardware?? Has anyone got the same problem? Thank you so much.HeffRaleigh wrote:
A couple more diagnostic tidbits.....my iPhone exhibited odd behavior after downloading the Star Gazer app from the App Store on Sunday. I activated the "arrange icon" feature to move the app icon for Star Gazer to a new position on my iPhone and after I moved it the icon for the app next to it (Weather Channel App) was absent but the label was present. When I slid my app screen back to the home screen and came back, the Weather Channel App icon was visible and the Star Gazer app was now absent but the label was present. I've also had some odd flashes of the home screen after unlocking my phone (I have it secured with a PIN to protect my data). Is this and IOS 4.1 issue?
It is not an iOS 4 issue; it is a very rare problem, and has occurred with all versions. But if you search you will see reports are in the dozens, with 100 million phones in use that's a vanishingly small number. It usually means that memory in the phone is corrupted. If rebooting the phone doesn't fix it you should restore the phone using iTunes. -
I started to do a backup on my iphone 5s following a notice the device gave. but it was unsuccessful and in the first use of my iphone I saw my iphone battery drains drastically. I had upgraded the software to ios 7.1. what should i do now? is this a problem with the battery?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
Does iOS6.1 help with the increased battery drain on iPhone 4s that iOS6.0 presented?
Does anyone know if the iOS6.1 does anything to remedy the increased battery drain on iPhone 4s that was presented with iOS6.0?
I upgraded to ios 6.1 when it first came out a couple of weeks ago and in the last 2 days am experiencing rapid battery drain...not sure if that's the cause.
-
I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?
Hi jstutsman,
If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
iPod not appearing in iTunes - Apple Support
Regards,
- Brenden -
After I upgraded my Iphone 4 with the ios 7.1.1 it locks up while sending text messages. I can usually send a few then will have to restart my phone(often more than once) to get it to send and receive messages again. I have done a back up and complete reset and that has not fixed the problem. Have been told that the ios 7.1.1 just isn't compatible with the Iphone 4 so that's why it is locking up so often, but I am hoping someone else may have a better answer since it can't be undone. Thanks!
7.1.1 is certainly compatible with the iPhone 4. Just try a reset first.
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
After having upgraded my iPhone 4S to iOS 7.0.2, I can not turn on Wi-Fi or Bluetooth. After trying various tricks I found via online forums such as software reset, enable Airplane mode, and resetting the network settings, I have now also completed reset of the phone WITHOUT success. Is there something more to it? If not learn hardly be any more iPhone for me. Really disappointed. Grateful for help!
If you have tried all of the steps in this support document http://support.apple.com/kb/TS1559 and have completed all of the user troubleshooting, restart, reset, restore from backup, restore as new, then make an appointment with the Apple store to have the hardware checked.
-
After I upgrade the AirPort utility, I cannot share my internet to my iPhone anymore.
After I upgrade the AirPort utility, I cannot share my internet to my iPhone anymore.
Please help me~~
軟體版本：
CoreWLAN： 2.1.2 (212.2)
CoreWLANKit： 1.0.3 (103.2)
附加選單： 7.1 (710.1)
設定外掛模組： 7.2.1 (721.3)
系統描述： 7.0 (700.3)
IO80211 系列： 4.2 (420.3)
WiFi 診斷： 1.0.2 (102)
AirPort 工具程式： 6.1 (610.31)
介面：
en1：
網路卡類型： AirPort Extreme (0x14E4, 0x8C)
韌體版本： Broadcom BCM43xx 1.0 (5.10.131.36.15)
MAC 位址： xx:xx:xx:xx:xx:xx
地點： RoW
國碼： US
支援的 PHY 模式： 802.11 a/b/g/n
支援的頻道： 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
使用無線功能喚醒： 支援的
AirDrop： 支援的
狀態： 無關聯Welcome!
Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
To get fast wireless without buying more than one thing, consider this:
http://eshop.macsales.com/item/Edimax/EW7722IN/
It goes in an available PCI slot
There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
USB wireless "dongle:"
Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
USB PCI adaptor:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner. -
After upgrading the iPhone 4 to iOS5, the camera icon doesn't appear on the lock screen. How do I get that? I've already tried restoring...
My photostream doesn't sync to my Mac Air either...And to continue the help:
The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook. -
I cannot sync contacts between my iPhone 4s and MacBook Pro after I upgraded the Mac with the latest operating system software upgrade. Even the Mac Store couldn't help...
That is because that sync ability (for contacts and calendars) has been removed. Use iCloud instead.
-
Hi All,
Automatically call is going to someperson in the contact list after latest upgrade in iphone 5s
Thanks and Regards,
RaghulBasic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
"General" in Settings won't open after I installed the iphone 4.0 upgrade.
"General" in Settings won't open after I installed the iphone 4.0 upgrade. Any ideas?
Have you tried to reset? Hold off button and home button together until Apple apears.
-
.Hey I received an email saying someone logged onto my iMessage and FaceTime. Does that happen after you update the iphone? I just downloaded the new upgrade
I spoke too soon. I tried Facetime again last night and had the same problems. Another factory reset did not work. I think it may be time to just call Apple support.
-
I recently purchased an iPhone 4s when it was running iOS 5.1.1. I eagerly updated to iOS 6 as soon as it was available. I had been seeing slightly less-than-optimal battery life of 5.1.1, but iOS 6 delivered simply terrible battery life. I have scoured through many forums and found nothing that worked. I have even tried restoring as a new phone, but with no results. Before I go ahead and make a Genius Bar appointment, is there anything I can do to fix this? I have reset all settings, turned off bluetooth, turned off push mail and notifications and location for unnecessary things, including system services, disabled Siri, turned down brighness, gone through charge cycles, done hard reboots, and removed unnecessary syncing services. Yet my battery still fails to deliver. Can anyone recommend anything else to try?
As a reference, I get about 5-6 hours of light usage (checking email, checking news briefly, maybe watching a few YouTube videos) with 10-12 hours of standby on a good day. There have been days where I got up to 8 hours on very restricted usage. On bad days, when I throw in 15-20 minutes of games and more heavy video, I get 4 hours of usage maximum. I got far more than this on my iPod Touch 4G running iOS 5.1.1, so I was rather startled by this performance. If this is normal, and the iPhone battery in general isn't too good, please let me know. However, I have a strong feeling that this is unusual. If no solution presents itself, I will be going to see the Genius Bar.I don't really have an answer as such but I suffered from poor battery life after upgrading to ios6. After resetting and restoring a few times it started to last longer.
However, if you thought the battery drain was bad on 6, wait till you get 6.1! I took my phone off charge at 6:30 this morning, recharged it at midday and now, at 23:10, it's showing 17%. This is with light web surfing, a doze or so incoming emails and 2 words with friends games going on
Pretty poor, but par for the course. Every time an iOS update comes out it kills battery life.
My Daughters is the same. It must effect everybody
Allan
Maybe you are looking for
-
Adobe Acrobat 6.0 CE Standard edited forms do not display fields
I have a user who has Adobe Acrobat 6.0 CE Standard, she uses it to fill out an editable form created with Adobe and send it to clients. When this form is saved and attached to an e-mail, anyone who recieves it and opens it in Reader 9.0 the fields t
-
Need to send text string to new row in expandable table
I have a table that is a summary of other choices made throughout the document. For specific check boxes in the form, there is a defined phrase that needs to be sent to a new row in the summary table. The general idea is that for checkbox: form1.sfM
-
Macbook pro, bought on april and it came with lion
so i bouth me my 1st and new macbook pro, but it came with lion 10.7, i bought it yesterday, i know that the free upgrade program ended on march 30, but do you know if there is any chance i can get the upgrade? since the macbook came with lion and it
-
Proforma (Export Invoice) invoice not transferring to GTS system from ECC
Hi All, below mentioned was the error that displayed while transferring the Proforma invoice( export invoice) from ECC to GTS system in SM58 t code . Can any please through some light on this error Item category missing for item 1. I checked t
-
Seahorse keeps asking about password, even when ssh-key is used
Hi, I want easy access to my repos on bitbucket. I have set my id_rsa.pub in bitbucket preferences, but when I try take any action on repo I have to type password . First there is graphical popup menu to type password, when I cancel it I can type pas