After Patch  10.2.0.4, got "voting disk  corrupted" error.

Dear all,
My setting is:
OS:RHEL4.8 U8 x86
DB:10.2.0.1
CRS:10.2.0.1
After I installed Patchset 10.2.0.4 and execute $CRS_HOME/install/root102.sh, I could't start clusterware anymore. After checking ocssd.log, I found some messages like this:
[    CSSD]2010-01-07 15:53:06.519 [3086919360] >TRACE: clssscmain: local-only set to false
[    CSSD]2010-01-07 15:53:06.562 [3086919360] >TRACE: clssnmReadNodeInfo: added node 1 (x101) to cluster
[    CSSD]2010-01-07 15:53:06.578 [3086919360] >TRACE: clssnmReadNodeInfo: added node 2 (x102) to cluster
[    CSSD]2010-01-07 15:53:06.580 [3086919360] >TRACE: clssnmInitNMInfo: Initialized with unique 1262850786
[    CSSD]2010-01-07 15:53:06.586 [3086919360] >TRACE: clssNMInitialize: Initializing with OCR id (33483723)
[    CSSD]2010-01-07 15:53:06.650 [84294560] >TRACE: clssnm_skgxninit: Compatible vendor clusterware not in use
[    CSSD]2010-01-07 15:53:06.650 [84294560] >TRACE: clssnm_skgxnmon: skgxn init failed
[    CSSD]2010-01-07 15:53:06.657 [3086919360] >TRACE: clssnmNMInitialize: misscount set to (60), impending reconfig threshold set to (56000)
[    CSSD]2010-01-07 15:53:06.659 [3086919360] >TRACE: clssnmNMInitialize: Network heartbeat thresholds are: impending reconfig 30000 ms, reconfig start (misscount) 60000 ms
[    CSSD]2010-01-07 15:53:06.669 [3086919360] >TRACE: clssnmDiskStateChange: state from 1 to 2 disk (0//ocfs/voting)
[    CSSD]2010-01-07 15:53:06.669 [84294560] >TRACE: clssnmvDPT: spawned for disk 0 (/ocfs/voting)
[    CSSD]2010-01-07 15:53:08.755 [84294560] >TRACE: clssnmDiskStateChange: state from 2 to 4 disk (0//ocfs/voting)
[    CSSD]2010-01-07 15:53:08.821 [113339296] >TRACE: clssnmvKillBlockThread: spawned for disk 0 (/ocfs/voting) initial sleep interval (1000)ms
[    CSSD]2010-01-07 15:53:08.889 [3086919360] >TRACE: clssnmFatalInit: fatal mode enabled
[    CSSD]2010-01-07 15:53:08.999 [94784416] >TRACE: clssnmClusterListener: Spawned
[    CSSD]2010-01-07 15:53:09.002 [94784416] >TRACE: clssnmClusterListener: Listening on (ADDRESS=(PROTOCOL=tcp)(HOST=x102-priv)(PORT=49895))
[    CSSD]2010-01-07 15:53:09.002 [94784416] >TRACE: clssnmconnect: connecting to node(1), con(0x81bc480), flags 0x0003
[    CSSD]2010-01-07 15:53:09.069 [3083459488] >TRACE: clssgmclientlsnr: Spawned
[    CSSD]2010-01-07 15:53:09.072 [113339296] >ERROR: clssnmvDiskKillCheck: voting disk corrupted (0x00000000,0x00000000) (0//ocfs/voting)
[    CSSD]2010-01-07 15:53:09.072 [113339296] >TRACE: clssnmDiskStateChange: state from 4 to 3 disk (0//ocfs/voting)
[    CSSD]2010-01-07 15:53:09.072 [130767776] >TRACE: clssnmDiskPMT: disk offline (0//ocfs/voting)
[    CSSD]2010-01-07 15:53:09.072 [130767776] >ERROR: clssnmDiskPMT: Aborting, 1 of 1 voting disks unavailable
[    CSSD]2010-01-07 15:53:09.072 [130767776] >ERROR: ###################################
[    CSSD]2010-01-07 15:53:09.072 [130767776] >ERROR: clssscExit: CSSD aborting
[    CSSD]2010-01-07 15:53:09.072 [130767776] >ERROR: ###################################
[    CSSD]--- DUMP GROCK STATE DB ---
I tried to recreate my voting disk like this:
$CRS_HOME/bin/crsctl add css votedisk /ocfs/voting1 -force
$CRS_HOME/bin/crsctl delete css votedisk /ocfs/voting -force
$CRS_HOME/bin/crsctl add css votedisk /ocfs/voting -force
$CRS_HOME/bin/crsctl delete css votedisk /ocfs/voting1 -force
Then run root102.sh again but still got the same error message about "voting disk corrupted".
I was totally confused and don't know how to fix it.
Please, any suggestion would be appreciated.

Hello,
Did u try restore the OCR?
http://download-west.oracle.com/docs/cd/B19306_01/rac.102/b14197/votocr.htm#i1012456
The steps to apply RAC patch were followed correctly?
See a patchset roadmap at http://mufalani.blogspot.com/2009/06/applying-10204-patch-on-rac-systems.html
Best Regards,
Rodrigo Mufalani
http://www.mrdba.com.br/mufalani

Similar Messages

  • After downloading the BETA i went to open the file and got a "file corrupt" error

    there is n0thing else i can say except the download finished and when i went to open it the "corrupt file" error came up.

    Try downloading it with your A-V program temporarily disabled.

  • How to get rid of a black screen on an HP g62 after disk corruption check?

    I recently started up my computer and got a disk corruption error and I let it run through and it started up normally. Yesterday I got the error again and let it run once more and found that the laptop was deleting files. Now when I start it up all I can get through to is the log in screen and when I log in all I see is black with a cursor.  Could it be a virus? I have an HP G62 with Windows 7. I recently found that I needed to update my virus protection but it wasnt urgent. Please help.

    Could you please give me the exact model number of your notebook?
    You can use the following document if you need assistance in finding it.
    How Do I Find My Model Number or Product Number?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • TS3694 after trying to update itunes I got an error MJVCR80.dll  Does Apple have a fix for this?

    After trying to update itunes, I got an  MJVCR80.dll error,
    does anyone know how to fix this?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • System Panic After Patch by using EIS

    Hi,
    My system go panic when I rebooted my V100 after patch it with EIS Jan 2007 version. The error show below :
    panic[cpu0]/thread=30000f4dca0: BAD TRAP: type=31 rp=2a1002ff340 addr=38 mmu_fsr=0 occurred in module "genunix" due to a NULL pointer deferenceied to the system
    I had search through many similar case but i couldn't get a solution for this. Please help.

    The latest README for the Solaris 10 Recommended patch cluster, details complications for patch 118833-36. Lots of people are running into problems.
    If you are going to try to jumbo patch again, check the special instructions:
    Single-user mode, do not use the "-nosave" option, and patch a second time immediately afterwards, again in single-user mode.

  • Error while running isupplier portal from jdev after patches

    latest POS rollup patch was applied and since then i get an error on local machine while running portal pages, need not mention that my substitution has also broken after patches.
    On server :
    login as isupplier > click on any PO either on home page or any order via Orders> ponumber
    On local machine : I get below error when I click on any po.
    I have deleted all teh old classes and ftped the whole apps directory on my local machine, but i still get this error.
    Also noted that the functionality of changing PO, etc works fine, but this error gets printed in jdev console.
    can someone give me some clue ?
    thanks
    java.lang.ClassCastException
         at oracle.apps.pos.isp.server.PosServerUtil.checkSecurePO(PosServerUtil.java:85)
         at oracle.apps.pos.changeorder.webui.ViewOrderPGCO.processRequest(ViewOrderPGCO.java:1012)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:587)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
         at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
         at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1136)
         at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
         at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
         at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
         at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2335)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1734)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
         at OA.jspService(OA.jsp:34)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
         at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:209)
         at com.evermind.server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:189)
         at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:199)
         at OA.jspService(OA.jsp:39)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803)
         at java.lang.Thread.run(Thread.java:534)
    Edited by: OAF-dev on Apr 19, 2010 1:39 PM

    I cross checked all the versions and I have the correct one installed....
    it was working before the patch . Patch is only the upgrade of POS. I got all teh class files again on my local machine , but this error comees up in jdev console. and rest all works fine. I have no clue why.

  • Authorization problems after patch 6 upgrade and re-install

    Hello everybody.
    I had a perfect working Visual Composer installation.
    After patching it, I got an 401 message, stating that I do not have authorization to view this page:
    HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials.
    Uninstalling and reinstalling didn't bring me much further. It seems to be an Internet Explorer and/or IIS 6.0 related problem.
    Of course I followed the very valuable note 804996, but the problem remains...
    Can anyone help me out?
    Thanx.

    Hi all.
    I resolved my own problem.
    Additional to the permission settings as they are explained in note 804996, you must add the Directory Security - Authentication & Access Control, set to Integrated Windows Authentication.
    Otherwise Windows NTFS security will block you.
    Gr.,
    Marc.

  • Problem with national language after patching

    I have BEx Analyser based on Excel 2007. After patching with 801 (SAP NetWeaver 7.0 Support Package BI Frontend Add-on 7.x SP's for SAP GUI 7.10) got problem with national symbols input.
    Please any ideas...
    Thanks,
    Olga

    It's best to post this in a SQL Server forum. ConfigMgr is simply a delivery mechanism for the patch and really has nothing to do with what the patch actually does.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Smc fails after patching

    Good evening
    Running a freshly installed 11/06 build of solaris 10 x86, I don't have any issues with smc. Immediately after patching, installing all recommended patches, smc so longer starts up.
    bash-3.00# smc
    Warning: Cannot convert string "-monotype-arial-regular-r-normal--*-140-*-*-p-*-iso8859-1" to type FontStruct
    Warning: Unable to load any usable ISO8859-1 font
    Warning:
    Name: FONTLIST_DEFAULT_TAG_STRING
    Class: XmRendition
    Conversion failed. Cannot load font.
    Java Accessibility Bridge for GNOME loaded.
    java.lang.InternalError: java/langNullPointerException
    at sun.awt.motif.MComponentPeer.pSetFont(Native Method)
    at sun.awt.motif.MComponentPeer.setFont(MComponentPeer.java:247)
    at sun.awt.motif.MWindowPeer.init(MWindowPeer.java:116)
    at sun.awt.motif.MFramePeer.<init>(MFramePeer.java:58)
    at sun.awt.motif.MToolkit.createFrame(MToolkit.java:231)
    at java.awt.Frame.addNotify(Frame.java:491)
    at java.awt.Window.addNotify(Window.java:462)
    at java.awt.Window.show(Window.java:514)
    at com.sun.management.viper.console.gui.VSplashScreen.show(VSplashScreen.java:166)
    at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.openConsole(BaseConsoleOptionsManager.java:746)
    at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.redirectToConsole(BaseConsoleOptionsManager.java:648)
    at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.launchConsole(BaseConsoleOptionsManager.java:173)
    at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.main(BaseConsoleOptionsManager.java:861)
    I'm guessing that something got horked up during patching, however, I'm not really sure which one(s) might have done so. Anyone have any ideas?
    -Matt

    I'm more familiar with the similarly-named Sun Management Center, but I think this may be a Java compatibility issue: possibly the patched version requires a later version of java. It would help to know which version's in your environment (java -version).

  • "Short read error" after patching solaris 10 x86?

    We recently bought an Ultra 20 with Solaris 10. The first thing we did was attempt to patch it with smpatch. Specifically, we did the following steps:
    > smpatch update
    > shutdown -i s -g 0
    > smpatch add -x idlist=/var/sadm/disallowed_patch_list
    > reboot
    When the machine rebooted we got a "short read error" message when trying to load in various drivers and wouldn't boot. We assumed that the disk had crashed and we reinstalled solaris from the DVDs. After the reinstallation, we went to patch the machine again, with the same steps, and exactly the same thing happened!
    So is there something wrong with patching solaris 10 on x86? Has anybody else experienced this problem where the patching corrupts the disks (or the drivers)?
    Thanks.
    Karl

    There have always been "short read error"s during boot on <b>some</b> systems with Solaris 10 x86 since the release.
    http://groups.yahoo.com/group/solarisx86/message/29310
    http://groups.yahoo.com/group/solarisx86/message/29358
    Do you get the error every time during boot? Sometimes it helps to
    press <RETURN> at the boot prompt, and not let the system wait for
    the five second timeout.

  • 10gR2 Clusterware Install on Windows 2003 SP2 after Patch 10.2.0.4 crash

    After fresh installaion 10g R2 clusterware and db on Windows 2003 (x64) sp2.->>Works well
    Install Patch 10.2.0.4 -->>Tnserror and other error as write in metalink (February 2010 Patch 32)
    --Remove all oracle files (c:\programfiles\oracle\*.*,d:\oracle\*.*,c:\windows\system32\drivers\o???.dll ),
    --all registery,all GUIOracleOBJManager.exe partition,
    --all system enviroment,
    --all c:\temp and c:\windows\temp and c:\localseting\???\temp from both system.
    But with new installation 10gR2 Clusterware error on second machine D:\oracle\product\10.2.0\crs\log\rac2\evmd\evmd.log below
    2010-02-12 11:48:10.171: [    EVMD][2716]32Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.4.0
    2010-02-12 11:48:10.171: [    EVMD][2716]32Exiting, Active Version greater than Software Version
    2010-02-12 11:48:10.171: [    EVMD][2716]32EVMD exiting: Version Compatibility check failed
    My question how can i clear all installation Oracle 10gR2 with patch 10.2.4. from windows 2003

    I solved my problem.
    Solution dont forget to clean all ocr and voting disk using storage software .Oracle clean log utility does not clean all data or other things in disk volumes.
    You must use storage clean utlity or rebuild your volume in storage software.
    Thanks

  • Error after patch EP6.0 SP3- EP6.0 SP4(patch4)- WAS6.40SP6

    We have WAS 6.40 SP 6.0 and EP 6.0 SP3 on HP-Unix 11i 64-bit.
    I have tried to patch the portal twice to SP4 and after patching I got
    twice the same problem.
    The patch application - the exact patch is EP 6.0 SP4 Patch4 is
    successful. There are no errors in the installation logs, etc.
    But when I try to login to the portal url I get this error message:
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    Could not find portal application com.sap.portal.ivs.api_iview.
    Exception id: 02:21_05/08/04_0001_1516650
    See the details for the exception ID in the log file
    The error part of the portal log file is attached. The WAS is running
    perfectly, no other errors or issues. The heap memory is set as per the
    OSS 723909. I wonder if I have to add the 32-bit compatible UNIX shared
    memory parameter settings as per OSS 497427, but I do not think it is
    related the issue.
    Please, advise.
    Vladimir
    Portal Log:
    Aug 5, 2004 2:18:19 PM # SAPEngine_Applica... Info Loading
    application com.sap.portal.yahoo #
    Aug 5, 2004 2:18:19 PM # SAPEngine_Applica... Fatal Operation
    failed - application: com.sap.portal.ivs.iviewservice
    com.sapportals.portal.prt.runtime.PortalRuntimeException:
    [PortalApplicationItem.__prepareClassLoaderAndDependencies]:
    com.sap.portal.ivs.iviewservice
    at
    com.sapportals.portal.prt.core.broker.PortalApplicationItem.__prepareCla
    ssLoaderAndDependencies(PortalApplicationItem.java:361)
    at
    com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare
    (PortalApplicationItem.java:207)
    at
    com.sapportals.portal.prt.core.broker.PortalApplicationItem.getCoreLoade
    r(PortalApplicationItem.java:276)
    at
    com.sapportals.portal.prt.core.broker.PortalApplicationItem.__initJNDISu
    pport(PortalApplicationItem.java:1780)
    at
    com.sapportals.portal.prt.core.broker.PortalApplicationItem.__initJNDISu
    pport(PortalApplicationItem.java:1746)
    at
    com.sapportals.portal.prt.core.broker.PortalApplicationItem.initJNDISupp
    ort(PortalApplicationItem.java:1730)
    at
    com.sapportals.portal.prt.core.broker.PortalAppBroker.preparePortalAppli
    cations(PortalAppBroker.java:1306)
    at com.sapportals.portal.prt.core.broker.PortalAppBroker.start
    (PortalAppBroker.java:1429)
    at
    com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplic
    ations(PortalAppBroker.java:1389)
    at com.sapportals.portal.prt.runtime.Portal.init
    (Portal.java:359)
    at
    com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit
    (PortalCoreInitializer.java:54)
    at
    com.sapportals.portal.prt.dispatcher.PortalInitializer.<init>
    (PortalInitializer.java:129)
    at
    com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer
    .run(Dispatcher.java:156)
    at java.security.AccessController.doPrivileged(Native Method)
    at
    com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher
    (Dispatcher.java:354)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000
    (Dispatcher.java:40)
    at
    com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run
    (Dispatcher.java:109)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.init
    (Dispatcher.java:387)
    at
    com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponent
    s.addServlet(WebComponents.java:130)
    at
    com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadI
    nitializer.loadServlets(ApplicationThreadInitializer.java:376)
    at
    com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadI
    nitializer.run(ApplicationThreadInitializer.java:110)
    at com.sap.engine.core.thread.impl3.ActionObject.run
    (ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute
    (SingleThread.java:94)
    at com.sap.engine.core.thread.impl3.SingleThread.run
    (SingleThread.java:144)
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException:
    [PortalApplicationItem.__prepareClassLoaderAndDependencies]:
    com.sap.portal.ivs.api_iview
    at
    com.sapportals.portal.prt.core.broker.PortalApplicationItem.__prepareCla
    ssLoaderAndDependencies(PortalApplicationItem.java:361)
    at
    com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare
    (PortalApplicationItem.java:207)
    at
    com.sapportals.portal.prt.core.broker.PortalApplicationItem.__prepareCla
    ssLoaderAndDependencies(PortalApplicationItem.java:352)
    ... 24 more
    Caused by:
    com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException
    : Could not find portal application com.sap.portal.ivs.api_iview
    at
    com.sapportals.portal.prt.core.broker.PortalApplicationItem.refresh
    (PortalApplicationItem.java:1093)
    at
    com.sapportals.portal.prt.core.broker.PortalApplicationItem.__prepareCla
    ssLoaderAndDependencies(PortalApplicationItem.java:326)
    ... 26 more
    Follow errors of other applications like
    com.sap.portal.ivs.systemlandscapeservice, which are probably dependent
    on the com.sap.portal.ivs.iviewservice.

    We needed exactly the SP Stack 3 specification - WAS 6.40 SP6 and EP 6.0 SP4, so I could not go to higher SP on both WAS and EP.
    I resolved the issue by applying all EP6.0 SP4 patches sequentially. SAP claims that these patches are cumulative and you can directly install the latest available patch, but it did not work in our case.
    I was suspicious at the beginning, because the files size of the first patch is much bigger that patch 4, but the installation did not complained:
    08/03/2004  06:13p          32,672,495 EP6PORTAL04P_4-20000394.SAR
    08/03/2004  06:03p          50,455,982 EP6PORTAL04_0-20000394.SAR
    Regards,
    Vladimir

  • Lost NSS Pool After Patching

    Just ran the latest patches on my OES11SP1 server and one of the NSS pools has disappeared. The lost pool was built on top of a linux RAID5 array and worked with no problems until last night. After patching and restarting the server, the pool was no longer listed via nssmu and the raid is no longer listed under devices - a check of the linux array showed that it is up and stable. I tried to rebuild the pool via nsscon, but it said that it does not exist - any ideas on how can I get the pool up and running again?

    Originally Posted by magic31
    I'm assuming this is an OES install, installed directly on the hardware (no virtualisation layer)?
    You mention the raid is no longer listed... but are the disk devices themselves listed? If not in nssmu, are you seeing them listed in the output of "fdisk -l"?
    Along that line... What kind of disk controller(s) do you have in the server? Have you installed any separate drivers for controllers (not included in the SLES install) that might have not loaded with a kernel update?
    If you have the option to open an SR alongside getting pointers here, that would be wise imo.
    -Willem
    This was an install of OES11SP1 directly to the hardware.
    The disk themselves show up in nssmu and mdadm sees the array with no errors.
    The disk controller is on the motherboard (Adaptec chipset) but did not need any special drivers or config during the install.
    What I have seen in the docs is that with OES11SP1, it frowned upon to run NSS on a Linux-software array like I was using. I tried to mount the array using using the mnt command and a file type of "nsspool" but got an error; nsscon says to validate and rebuild the pool, but then comes back and won't let me put it in maintenance mode. I am wondering if I need to delete the old Pool object from NDS, but that won't address the lack of NSS seeing the device...
    -L

  • Function module "GM_DOCUMENT_REVERSE" not found.  after Patch Update

    Hi Abapers/Basis
    After patch update i am not able to do FBCJ reversal entry getting below error message.
    Runtime Errors         CALL_FUNCTION_NOT_FOUND
    Exception              CX_SY_DYN_CALL_ILLEGAL_FUNC
    Date and Time          25.05.2011 14:43:26
    Short text
         Function module "GM_DOCUMENT_REVERSE" not found.
    What happened?
         The function module "GM_DOCUMENT_REVERSE" is called,
         but cannot be found in the library.
         Error in the ABAP Application Program
         The current ABAP program "SAPLRWCL" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
         not caught in
        procedure "CALL_DISPATCHER_STORNO_R" "(FORM)", nor was it propagated by a
         RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        The program "SAPLRWCL" contains the CALL FUNCTION statement.
        The name of the function module to be called is "GM_DOCUMENT_REVERSE".
        No function module exists with the name "GM_DOCUMENT_REVERSE".
        All function modules are listed in the Function Library (SE37).
        Possible reasons:
        a) Wrong name specified. Pay particular attention to
           upper/lower case and underscores ("_").
           or
        b) Transport error
        c) In the case of an enqueue/dequeue module,
           the lock object may not have been activated
           (ABAP/4 Dictionary).
    How to correct the error
        Check the last transports to the SAP System.
        Is the program "SAPLRWCL" currently being changed?
        If an enqueue/dequeue module is involved, is the activation
        of the lock object missing in the ABAP/4 Dictionary?
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "CALL_FUNCTION_NOT_FOUND" "CX_SY_DYN_CALL_ILLEGAL_FUNC"
        "SAPLRWCL" or "LRWCLF10"
        "CALL_DISPATCHER_STORNO_R"
        Function modules with names similar to "GM_DOCUMENT_REVERSE":
        GM_DOCUMENT_CLOSE
        GM_DOCUMENT_RECORD
        GM_DOCUMENT_DELETE
        GM_DOCUMENT_POST
        GM_DOCUMENT_CHECK
        G_DOCUMENT_RECORD
        GJ_DOCUMENT_RECORD
        GM_DOCUMENT_PROJECT
        GET_DOCUMENTS
        GM_DOCUMENT_DISPLAY
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    Moderator message: please don't just dump your dumps, search for SAP notes or open a call with SAP instead.
    Edited by: Thomas Zloch on May 25, 2011 2:16 PM

    Hi Karthik,
    Thank you for ur reply.
    I did not implement any user exit/ badi. Dump is saying that my smarform function module does not exist in the se37 library.
    I have excuted my form through se38, that time is working fine. When i tried through output type it is going to dump.
    Regards,
    Kusuma.

  • TS3212 Today, 01/23/2014, I tried updating iTunes, as I got a messsage that update was available. The update did not download correctly the  message to uninstall iTunes and reinstall it. After the uninstall and reinstall I got an error message, please hel

    Today, 01/23/2014, I tried updating iTunes, as I got a messsage that update was available. The update did not download correctly I got the message to uninstall iTunes and reinstall it. After the uninstall and reinstall I got an error message, that stated: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program fo fix. then I got the message, iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) I have had iTunes since I purchased the iphone in 2012. I have only updated the product since then until today when I did the uninstall ans reinstall as stated in above directions. I am not sure what is different now. please help

    I had this problem as well but found the soultion on another post from turingtest2 - it worked for me:
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selectingRun as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

Maybe you are looking for

  • How to view ALL batch job details (SM37) at one glance ?

    Dear all, I am documenting all released batch job details, the information required includes the job name, client number, job frequency .. etc. In order to see that information, i go to SM37 and click on each job to see the details. I have about 60 j

  • Getting 415 Unsupported Media Type error when calling a windows web service

    I have a BPEL process that invokes a windows web service. This process is working currently on the production system. When trying to run the process in a new test clustered environment, I'm getting the error below (bolded). We're using 10.1.3.3 Oracl

  • Creating expandable panels in LiveCycle

    I am in the middle of creating a dynamic pdf for my customers. I am offering various products and the information I need from my customers varies for every product. However, I would like to have only 1 pdf form that I can send to every customer and w

  • Log4J - reading properties file from /WEB-INF directory issue..

    I'm just learning to implement Log4J; the approach I am taking for my JSF application running under Tomcat 5.5x is to create an initialization servlet to initialize the logger, and then access the logger instance within my backing beans and applicati

  • Customizing headres and footers in Datagrid

    Hi,      How to customize headers and footers in Datagrid. Is there any example available. Regards, Jayagopal.