After patching XI system to SP14, disp+work not running
Hi All,
We have finished XI installation, then we also patching it from SP9->SP14 NW04s SR2. it works ok in SP9, but when we completed patching.
then when we start XI, it runs for 3-4mins, then disp+work in MMC stops.
following is the developer trace. pls help
Hardware: NT 2003 server. 3G cpu, 2G memory, 10G virtual memory
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid HXI
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: multithreaded, Unicode, optimized
pid 2732
Mon Feb 25 15:27:35 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2732) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 133 successfully loaded
shared lib "dw_xtc.dll" version 133 successfully loaded
shared lib "dw_stl.dll" version 133 successfully loaded
shared lib "dw_gui.dll" version 133 successfully loaded
shared lib "dw_mdm.dll" version 133 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Feb 25 15:27:41 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >CDCXI_HXI_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06D30040, size: 4930904)
DpShMCreate: allocated sys_adm at 06D30040
DpShMCreate: allocated wp_adm at 06D32090
DpShMCreate: allocated tm_adm_list at 06D36980
DpShMCreate: allocated tm_adm at 06D369B0
DpShMCreate: allocated wp_ca_adm at 071494B0
DpShMCreate: allocated appc_ca_adm at 0714F270
DpShMCreate: allocated comm_adm at 071511B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 071D2070
DpShMCreate: allocated gw_adm at 071D20B0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 071D20E0
DpShMCreate: allocated wall_adm at 071D20E8
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Mon Feb 25 15:27:42 2008
J2EE server info
start = TRUE
state = STARTED
pid = 3016
argv[0] = C:\usr\sap\HXI\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\HXI\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\HXI\SYS\profile\HXI_DVEBMGS00_CDCXI
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=HXI
argv[7] = -DSAPMYNAME=CDCXI_HXI_00
argv[8] = -DSAPPROFILE=C:\usr\sap\HXI\SYS\profile\HXI_DVEBMGS00_CDCXI
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
Mon Feb 25 15:27:43 2008
***LOG Q0K=> DpMsAttach, mscon ( CDCXI) [dpxxdisp.c 11799]
DpStartStopMsg: send start message (myname is >CDCXI_HXI_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Mon Feb 25 15:27:44 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 133
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Mon Feb 25 15:27:53 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4361]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1460
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1177) [nixxi.cpp 4361]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3016)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Feb 25 15:28:23 2008
ERROR => DpHdlDeadWp: W0 (pid 3116) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W1 (pid 3104) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W2 (pid 3072) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W3 (pid 3148) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W4 (pid 3140) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W5 (pid 3120) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W6 (pid 3096) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W7 (pid 3092) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W8 (pid 3136) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W9 (pid 3080) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W10 (pid 3172) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W11 (pid 3164) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W12 (pid 3204) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:33 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Feb 25 07:28:33 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3116 Ended no 1 0 0
1 DIA 3104 Ended no 1 0 0
2 DIA 3072 Ended no 1 0 0
3 DIA 3148 Ended no 1 0 0
4 DIA 3140 Ended no 1 0 0
5 DIA 3120 Ended no 1 0 0
6 UPD 3096 Ended no 1 0 0
7 ENQ 3092 Ended no 1 0 0
8 BTC 3136 Ended no 1 0 0
9 BTC 3080 Ended no 1 0 0
10 BTC 3172 Ended no 1 0 0
11 SPO 3164 Ended no 1 0 0
12 UP2 3204 Ended no 1 0 0
Dispatcher Queue Statistics Mon Feb 25 07:28:33 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Mon Feb 25 07:28:33 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Feb 25 07:28:33 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:38 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >CDCXI_HXI_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2992) (SOFT_KILL)
Stop icman
killing process (2968) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2992 HANDLE:1556)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:39 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2992 HANDLE:1556)
wait for end of icman
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:40 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:41 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:42 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:43 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:44 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:45 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:46 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:47 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:48 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:49 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2968 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 25 15:28:50 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2968 HANDLE:1560)
[DpProcDied] Process died (PID:3016 HANDLE:1540)
DpStartStopMsg: send stop message (myname is >CDCXI_HXI_00 <)
NiIMyHostName: hostname = 'CDCXI'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Feb 25 15:28:51 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12145]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1484 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1484 (pos=3)
SiSelNRemove: removed sock 1484
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1484
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2732) [dpxxdisp.c 10417]
Good Bye .....
Yes, I have, following is dev_w0, thank you in advance.
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Feb 25 15:40:12 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\HXI\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'C:\usr\sap\HXI\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'C:\usr\sap\HXI\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.115)
B New connection 0 created
M sysno 00
M sid HXI
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 133
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2052
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2052) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 18672 (1436)
M DpShMCreate: sizeof(tm_adm) 4270848 (21248)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1544)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06D30040, size: 4930904)
M DpShMCreate: allocated sys_adm at 06D30040
M DpShMCreate: allocated wp_adm at 06D32090
M DpShMCreate: allocated tm_adm_list at 06D36980
M DpShMCreate: allocated tm_adm at 06D369B0
M DpShMCreate: allocated wp_ca_adm at 071494B0
M DpShMCreate: allocated appc_ca_adm at 0714F270
M DpShMCreate: allocated comm_adm at 071511B0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 071D2070
M DpShMCreate: allocated gw_adm at 071D20B0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 071D20E0
M DpShMCreate: allocated wall_adm at 071D20E8
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X
X Mon Feb 25 15:40:13 2008
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host CDCXI
M
M Mon Feb 25 15:40:14 2008
M calling db_connect ...
C Prepending C:\usr\sap\HXI\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@HXI on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 073217F8 07326E94 0732671C
C Attaching to DB Server HXI (con_hdl=0,svchp=07326668,srvhp=07338264)
C
C Mon Feb 25 15:40:15 2008
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12541
[dboci.c 4313]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c 11044]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@HXI on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 073217F8 07326E94 0732671C
C Detaching from DB Server (con_hdl=0,svchp=07326668,srvhp=07338264)
C Attaching to DB Server HXI (con_hdl=0,svchp=07326668,srvhp=07338264)
C
C Mon Feb 25 15:40:16 2008
C *** ERROR => OCI-call 'OCIServerAttach' failed with rc=12541
[dboci.c 4313]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c 11044]
B ***LOG BY2=> sql error 12541 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 12541 performing CON [dblink#5 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dblink#5 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10380]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server CDCXI_HXI_00 on host CDCXI (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Feb 25 15:40:16 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10585
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2052) [dpnttool.c 327]
Similar Messages
-
CS6 on W7-64 worked fine since April 2013. After a general system update its activation is not recognized anymore. The activation key is suddenly invalid. I uninstalled the sofware and tried to reinstall. Failed. How to get my activation key valid again?
Error "The serial number is not valid for this product" | Creative Suite
-
Why do mulitple instances of the process 'disp+work.exe' run
Hello friends
I am getting 'out of memory' when I try to bring up a website from portal that uses XI. When I checked the processes running, I noticed many many instances of 'disp+work.exe' running. Why do we need so many instances, if at all needed.
Any feedback on this and also the out of memory problem will be greatly appreciated.
We have about 4 gig of RAM and I don't know how much extra RAM this nees?
Thanks
RamHi,
I think the disp+work.exe Processes relate to the work process you have configured ( DIA + BG + UPD+ SPO + ENQ)
So i you see @ os level you should see a number which is equivalent to total no of work process and i suppose it has no connection java worker threads.
Award points if helpful.
And where exactly you are getting the Outof Memory error
Thanks,
Tanuj -
After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run. itunes will not now run.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
after upgrading to os josemite cs4 applications will not run. Message displayed that I need to install the legacy java SE 6 runtime. Is this necessary to fix the application loading?
Found the answer:
Java for OS X 2014-001 includes installation improvements, and supersedes all previous versions of Java for OS X. This package installs the same version of Java 6 included in Java for OS X 2013-005.
installed above and it now works
Blessings -
JCo missing after patching the system
Hi
We have gone for pataching the Portal and ESS. We see that after patching there is only Selfservicgenerics and HumanResources Jco appearing. All other JCo,s are missing from the system. Is this normal behavior ??
How do we get other JCo appear asthey were already configured before.Hi Purav,
I think yuu need me create manually as per your required JCO for ESS/MSS applciation.
Try to check in the SLD if all earlier JCO's available
Thanks
Arun -
Hello gurus,
System: Solution Manager
OS: Windows 2003 server R2 X32
DB: Microsoft SQL server 2005
I have an error when I tried to start my solution manager system, after having done a kernel upgrade (for the level 201)
I donu00B4t know why but the error (as you see in following image) itu00B4s in the java stack more particularly in disp+work.EXE Dispatcher with the status "Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailable".
http://img6.imageshack.us/img6/7067/solmanj2eeerror.png
Can you help me whatu00B4s the problem here?
This next text itu00B4s a dev_disp log... maybe with this you get the error and the solution for that! :
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid PSM
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 201
intno 20050900
make: multithreaded, ASCII, optimized
pid 756
Sun Jul 05 21:08:44 2009
kernel runs with dp version 242(ext=110) (@(#) DPLIB-INT-VERSION-242)
length of sys_adm_ext is 364 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 756) [dpxxdisp.c 1287]
shared lib "dw_xml.dll" version 201 successfully loaded
shared lib "dw_xtc.dll" version 201 successfully loaded
shared lib "dw_stl.dll" version 201 successfully loaded
shared lib "dw_gui.dll" version 201 successfully loaded
shared lib "dw_mdm.dll" version 201 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sun Jul 05 21:08:49 2009
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5518]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >salzburgo_PSM_01 <
DpShMCreate: sizeof(wp_adm) 16464 (1176)
DpShMCreate: sizeof(tm_adm) 3786880 (18840)
DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 055C0040, size: 4419544)
DpShMCreate: allocated sys_adm at 055C0040
DpShMCreate: allocated wp_adm at 055C1BF8
DpShMCreate: allocated tm_adm_list at 055C5C48
DpShMCreate: allocated tm_adm at 055C5C78
DpShMCreate: allocated wp_ca_adm at 059624F8
DpShMCreate: allocated appc_ca_adm at 05966B78
DpShMCreate: allocated comm_adm at 059682E8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 059E9198
DpShMCreate: allocated gw_adm at 059E91D8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 059E9208
DpShMCreate: allocated wall_adm at 059E9210
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
J2EE server info
start = TRUE
state = STARTED
pid = 5700
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( salzburgo) [dpxxdisp.c 12527]
DpStartStopMsg: send start message (myname is >salzburgo_PSM_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 201
Release check o.K.
Sun Jul 05 21:08:55 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Sun Jul 05 21:08:57 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1444
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2040) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:09:29 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:09:49 2009
J2EE server info
start = TRUE
state = STARTED
pid = 2168
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:09:52 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1440
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2126) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:10:09 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:10:29 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5484
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64997
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:10:32 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1532
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2133) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:10:49 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:11:09 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3348
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64996
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:11:12 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1436
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2144) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:11:29 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:11:49 2009
J2EE server info
start = TRUE
state = STARTED
pid = 1868
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64995
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:11:52 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1444
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2152) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:12:09 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:12:29 2009
DpEnvCheckJ2ee: switch off j2ee start flag
Best regards,
Jou00E3o Dimas - Portugal
Edited by: Jou00E3o Dimas on Jul 5, 2009 11:39 PMHi uday kumar,
First thank you to tried to help me!
--> So... I have a problem... in that checked that you asked, I donu00B4t have acess to all clients in system... Iu00B4m only able to login to client 000 and 100 and in that clients that two users SAPJSF and J2ee_admin donu00B4t exist!! But maybe in 001... I donu00B4t know!! Itu00B4s any other way to know that? I think through configtool in j2ee directory... but I donu00B4t get that, maybe because I donu00B4t have the JAVA part active!!
--> And other thing, you recommed me to "Check the profile parameters once, try change the JVM setting and check were you able to start the server"... What you want to say with JVM setting.. sorry Iu00B4m still newest in sap world... can you explain me better what you wanted to say..?! Thanks.
--> Other think and the last... I checked the sapstartsrv.log in D:\usr\sap\PSM\SCS00\work directory path and in that it said this:
trc file: "sapstartsrv.log", trc level: 0, release: "700"
Mon Mar 09 11:13:46 2009
<<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
Can you help me?!... thanks a lot!
Best regards,
Jou00E3o Dimas - Portugal -
Disp+work.exe running but Message Server Unreachable
Hi all,
I am new bee to this forum. can anybody guide me about this problem. i was working around for the past 4 days. still i was not able to find out the solution for this problem. when i am trying to connect SAP Server through SAPGUI, it was not connecting. i cross check with SAP MMC in the process list only one process was running (Message service) remaing processes were stopped. but disp+work.exe was running but with error message as <b>"Running but message server unreachable"</b>. as per my knowledge this may be problem with sapmsg.ini. plz let me know how to fix this problem.Hi!
I have same problem after installation SAPNW7. TrialSP12.
I'm running virtual MS Windows SP2 using VMWare Workstation 8.0
dev_ms is attached.
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 3436] Sat May 12 11:17:33 2012
[Thr 3436] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 3432
[Thr 3436] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3432) [msxxserv.c 1824]
[Thr 3436] MsInitAclInfo: acl file D:\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 3436] MsGetOwnIpAddr: my host addresses are :
[Thr 3436] 1 : [10.10.0.10] sap.localhost (HOSTNAME)
[Thr 3436] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 3436] 3 : [192.168.238.128] allon-51c22207c.corp.loc (NILIST)
[Thr 3436] MsHttpInit: full qualified hostname = sap.localhost
[Thr 3436] HTTP logging is switch off
[Thr 3436] set HTTP state to LISTEN
[Thr 3436] MsHttpOwnDomain: own domain[1] = localhost
[Thr 3436] ms/icf_info_server : deleted
[Thr 3436] *** I listen to port sapmsNSP (3600) ***
[Thr 3436] *** I listen to internal port 3900 (3900) ***
[Thr 3436] *** HTTP port 8100 state LISTEN ***
[Thr 3436] CUSTOMER KEY: >I1895797210<
[Thr 3436] Sat May 12 11:28:22 2012
[Thr 3436] *** ERROR => MsSCheckConnections: no response from client C0 (10.10.0.10) after 300 secs received [msxxserv.c 3165]
[Thr 3436] *** ERROR => MsSCheckConnections: disconnect now [10.10.0.10] [msxxserv.c 3169]
Regards,
Olga. -
Disp+work.exe - Running but dialog queue statistics unavailable
Hi,
We have two diferent instances in the same machine. One on them have disp+work.exe in yellow and show message "Running but dialog queue statistics unabailable". This is right, the queue statistics have no item to show, but I can login perfectly in sapgui and see the processes in tx sm50.
Where sapmmc read from? Instance profiles? Any other file?
Thanks for all.Yes, problem solved.
I stopped windows instance service and overwrote the exe.
Thanks for all again -
Disp+work.exe running but meesage server unreachable
Hi Guys,
i was working around for the past 4 days. still i was not able to find out the solution for this problem. when i am trying to connect SAP Server through SAPGUI, it was not connecting. i cross check with SAP MMC in the process list only one process was running (Message service) remaing processes were stopped. but disp+work.exe was running but with error message as "Running but message server unreachable". as per my knowledge this may be problem with sapmsg.ini. plz let me know how to fix this problem.
any help would be appreciated
Thanks,
srini
Message was edited by:
raj reddyhi ,
plz help me .
dispatcher is running but cannot be connected to the message server
in dev_disp, the following error exists
Wed Oct 09 09:38:56 2013
*** ERROR => [DpProcDied] Process died (PID:248 HANDLE:956 rc:0x0) [dpnttool2.c 147]
DpHalt: wait for end of icman
DpHalt: waiting for termination of icman ...
Wed Oct 09 09:38:57 2013
*** ERROR => [DpProcDied] Process died (PID:2844 HANDLE:964 rc:0x0) [dpnttool2.c 147]
DpHalt: not attached to the message server
DpHalt: cleanup EM
***LOG Q05=> DpHalt, DPStop ( 2688) [dpxxdisp.c 11380] -
After installing iTunes on 64 bit Windows 8 systems iTunes will not run. I've tried to install 32 bit, but I'm told to install 64 bit version (64 bit version installs to x86 folder). iTuns will not run even if I attach iPod.
iTunes 11 works fine on my three Win 8 PCs
Try:
Trouble installing iTunes or QuickTime for Windows
Next try posting in the iTunes forum. -
After changing the Oracle password - Shared services is not running
Hi All,
I am getting the below error after changed my oracle password.
SharedServices Log:
com.hyperion.hit.registry.exceptions.RegistryException: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-28001: the password has expired
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:213)
at com.hyperion.hit.registry.RegistryConnection.getInstance(RegistryConnection.java:155)
at com.hyperion.hit.registry.Registry.getInstance(Registry.java:309)
at com.hyperion.eie.config.util.xml.XMLUtils.getDBConfigProperties(Unknown Source)
at com.hyperion.eie.config.util.database.DBProperties.isDBConfigured(Unknown Source)
at com.hyperion.eie.common.cms.CMSFacade.isCMSInitialized(Unknown Source)
at com.hyperion.cas.server.CASAppCacheLoader.run(CASAppCacheLoader.java:22)
Caused by: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-28001: the password has expired
at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
at hyperion.jdbc.oracle.OracleImplConnection.connectAndAuthenticate(Unknown Source)
at hyperion.jdbc.oracle.OracleImplConnection.open(Unknown Source)
at hyperion.jdbc.base.BaseConnection.connect(Unknown Source)
at hyperion.jdbc.base.BaseConnection.setupImplConnection(Unknown Source)
at hyperion.jdbc.base.BaseConnection.open(Unknown Source)
at hyperion.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:203)
... 6 more
Attempting to connect to database: Retry Count: 10
Shared Services couldn't be Initialized. The database is either not configured or not running.
Thanks,
PCHi John,
After changing the password only, I am getting the Oracle error"[Hyperion][Oracle JDBC Driver][Oracle]ORA-28001: the password has expired" in shared services log.
I changed the password for the schema called "System". But i configured my hyperion system with different schema "Hypconfig".
Thanks,
PC -
After installing Lion the microsoft office programs (word, excel,...) do not run! What can I do as I need them for external communication?
There are also free alternatives such as Neo Office.
You can also install the Office 2011 30 day trial if it's urgent. -
After Mavericks update system preferences buttons quit working. Any help?
Affects all panes. Click a button, like "Options" and nothing happens.
Here is the error log report that comes up when I click a button:
10/30/13 1:25:08.607 PM System Preferences[839]: -[NSRemoteView viewDidMoveToWindow] caught non-fatal NSInternalInconsistencyException 'unable to convert NSNamedColorSpace System controlColor to Device RGB colorspace' with backtrace (
0 CoreFoundation 0x00007fff864c141c __exceptionPreprocess + 172
1 libobjc.A.dylib 0x00007fff90a47e75 objc_exception_throw + 43
2 CoreFoundation 0x00007fff864c11f8 +[NSException raise:format:arguments:] + 104
3 Foundation 0x00007fff8b5acc61 -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 189
4 ViewBridge 0x00007fff8a57a65c -[NSSecureColor initWithColor:] + 724
5 ViewBridge 0x00007fff8a57a36f +[NSSecureColor secureColorWithColor:] + 48
6 ViewBridge 0x00007fff8a59dcfb -[NSRemoteView sendFontSmoothingBackgroundColorToService:] + 40
7 ViewBridge 0x00007fff8a59ebf5 -[NSRemoteView viewDidMoveToWindow] + 197
8 AppKit 0x00007fff8c6841d0 -[NSView _setWindow:] + 2899
9 AppKit 0x00007fff8c681804 -[NSView addSubview:] + 364
10 AppKit 0x00007fff8c695953 -[NSFrameView addSubview:] + 45
11 AppKit 0x00007fff8c6a3cb5 -[NSWindow setContentView:] + 511
12 ViewBridge 0x00007fff8a5a4868 rendezvousPanel + 895
13 ViewBridge 0x00007fff8a5a3f3f -[NSRemoteView beginSheet:modalForWindow:size:isCritical:styleMask:] + 420
14 ViewBridge 0x00007fff8a5a4eea -[NSRemoteView beginDeferredSheet:] + 209
15 ViewBridge 0x00007fff8a5a5098 -[NSRemoteView beginDeferredSheets] + 283
16 ViewBridge 0x00007fff8a5a9ca2 __85-[NSRemoteViewMarshal beginSheet:modalForWindow:size:isCritical:styleMask:withReply:]_block_invoke + 83
17 ViewBridge 0x00007fff8a5ad892 __deferBlockOntoMainThread_block_invoke_3 + 441
18 CoreFoundation 0x00007fff863f27cc __CFRUNLOOP_IS_CALLING_OUT_TO_A_BLOCK__ + 12
19 CoreFoundation 0x00007fff863e3ee5 __CFRunLoopDoBlocks + 341
20 CoreFoundation 0x00007fff863e3c6e __CFRunLoopRun + 1982
21 CoreFoundation 0x00007fff863e3275 CFRunLoopRunSpecific + 309
22 HIToolbox 0x00007fff89ab1f0d RunCurrentEventLoopInMode + 226
23 HIToolbox 0x00007fff89ab1cb7 ReceiveNextEventCommon + 479
24 HIToolbox 0x00007fff89ab1abc _BlockUntilNextEventMatchingListInModeWithFilter + 65
25 AppKit 0x00007fff8c66d28e _DPSNextEvent + 1434
26 AppKit 0x00007fff8c66c8db -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
27 AppKit 0x00007fff8c6609cc -[NSApplication run] + 553
28 AppKit 0x00007fff8c64b803 NSApplicationMain + 940
29 libdyld.dylib 0x00007fff8f6d05fd start + 1
30 ??? 0x0000000000000001 0x0 + 1
timestamp: 13:25:08.607 Wednesday 30 October 2013
process/thread/queue: System Preferences (839) / 0x7fff76cb2310 / com.apple.main-thread
code: line 607 of /SourceCache/ViewBridge/ViewBridge-46/ViewBridgeUtilities.m in logCaughtException
domain: exceptions -
After restarting the system, WAS for ABAP is not able to connect Database
Hi,
I installed Sneak Preview SAP NetWeaver Application Server for ABAP in Local system. After restaring the desktop,I am getting following errors-
1. SAP-Basis System: Initialization DB-Connect Failed, Return Code 000256
2.Database: Database error -10709 at CON
3. Database: > Connection failed (RTE:Database name is missing)
Here, i have not done any thing except restarting the destop. before restart every thing was working fine.
please give me some clue, what may happed to the Application.
Thanks
AnilI moved your thread from Web Dynpro ABAP to the forum for problems with the trial systems. Hopefully you will find more help here.
You didn't by any chance change machine name? I had a very similar error once when I was forced to rename my machine. Maybe you will find something from this blog helpful:
/people/thomas.jung/blog/2006/02/03/as-abap-sneak-preview-lessons-computer-rename
Maybe you are looking for
-
Missing functionality request. Deleting manufacturers.
Version: 2007A SP:00 PL:46 Manufacturers cannot be removed or deleted. Administration > Setup > Inventory > Manufacturers. Business needs: Certain Manufacturers no longer exist so our client needs to be able to maintain an updated list of Manufactur
-
From Classic abap FMs to ObjectOriented instance/static methods: reference
Hi All, we are migrating one of our project developed using classic abap to abap objects. mostly we are replacing the Function modules with either instance methods or static methods. for e.g. if there are FMs like GUI_UPLOAD, SO_NEW_DOCUMENT_SEND_API
-
we wrote a proxy that should handle request from the browser and deliver it to the parent but when we read from the parent after we read the first chunck of data and send it to the client we get connection reset error(SocketException) what should we
-
SAP Adapter Best Practice Question for Migration of Channels
I have a best practice question on the SAP adapter when migrating an OSB project from one environment (DEV) to another (QA). If my project includes an adapter channel that (e.g., Inbound SAP Proxy listening on a channel), how do I migrate that projec
-
Is it possible to select the brush tool and have it work as a gaussian blur brush? I'd like to be able to brush in the blur if possible to small areas rather than use the lasso tool method. THANKS