After PC Suite upgrade Nokia E70 is not recognized

Nokia E70 phone and out-of-the-box PC Suite, works fine.
The PC Suite informs me that I should upgrade the software, and I did with one boot. But now, after software upgrade the E70 phone is no longer recognized and my Windows XP states; unrecognized USB device.
Any help?

Try to go to device manager and highlight the unknown device, right click and select uninstall. Then boot PC, connect the phone again and see if it installs the drivers now properly. Also choosing another USB port might help. Make sure you select PC Suite USB mode in phone when you connect the cable

Similar Messages

My ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Changes in OER/OSR after SOA suite upgradation

I have existing SOA 10g version. Now we are planning to implement SOA Governence 11g as it's a new implementation, so we don't want to go back to 10g version. Now I think we can harvest 10g artifacts in OER/OSR 11g. If at later stage we upgrade the SOA suite to 11g version, what all needs to be changed to the already harvested components in OER/OSR. I mean to say how harvested elements can be reused after the SOA suite upgradation to 11g.

I even tried invoking it using HTTP GET. That worked from any browser.
What I ended up doing is using the SOAP Service component from within an ESB project. That can call a .NET web service without any problems. It is unfortunate that I couldn't do it directly from a BPEL orchestration. This workaround will suffice however.
Thanks anyway.

Apps Not Working after the Lollipop Upgrade on the Galaxy Note 4.

I did the lollipop upgrade on my Galaxy Note 4 and now I cannot get my Yahoo mail app or my GEICO app the work. I have uninstalled both apps and reinstalled them to no avail. Any help would be greatly appreciated.

Certainly understand the importance of applications Markjen2525! What happened when you uninstalled the apps and then resinstalled them? Are they giving you any error messages? Please share details, thanks!
KristieQ_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Ovi Suite 3.0.0.284 not recognizing N8

After I updating to new version of Ovi Suite, N8 device is not recognized. I did re-install/re-boot my windows 7 64-bit. No use.
I did try to revert back the Ovi install, funny thing is it is not allowing me to use the older version.
I doubt that Nokia OVI team didn't test the latest version before releasing to public.
Solved!
Go to Solution.

Hi Vzy & OHCM,
Thank you for your valuable feedback
Could you please provide more information regarding this issue.
- System Information (Help-About Ovi Suite-System Information Copy and Paste.
- Device Info (*#0000#)
- NOS Logs.
Here are the instructions for attaching log files:
- Open Nokia Ovi Suite 3.0.0.284 or later
- Enable log gathering by double-clicking the enable_logs.js file in installation folder C:\Program Files\Nokia\Nokia Ovi Suite
- Click the button to start enabling the logs when prompted by the dialogue
- Click the button to confirm the "Logs are enabled" dialogue
- Exit Nokia Ovi Suite from File - Exit. This is mandatory! Closing NOS to system tray is not enough!
- Open Nokia Ovi Suite again
- Try to reproduce the error you are reporting
- If the error still exists, double click the collect_logs.js file in installation folder C:\Program Files\Nokia\Nokia Ovi Suite
- Click the button to start collecting the logs when prompted by the dialogue
- Click the button to confirm the "Logs collect & zip finished" dialogue
- Attach the NOS2_logs.zip file in C:\Temp\NOS2 folder and screenshots in the error reporting form
- Disable log gathering by double-clicking the disable_logs.js file in installation folder C:\Program Files\Nokia\Nokia Ovi Suite
- Click the button to start disabling the logs when prompted by the dialogue
- Click the button to confirm the "Logs are disabled" dialogue
You can send these files and information to [email protected] mailbox and please mention this forum link and your discussion forum username in the email.
Looking forward to hear from you at the earliest
Regards
Nokia Ovi Suite Team

IPhone 5 will not boot up past startup screen after attempted update to iOS 8. Not recognized by computer.

Like everyone else today, I attempted to make the move to iOS 8, using my Mac's iTunes. All was running smoothly, the progress bar was nearing the end when I received the error that "the iPhone software update server could not be contacted." With a now useless phone, I restarted it, hoping for the best as I could do nothing. I am now stuck with a phone which will turn on to the white startup screen and black Apple Logo, then instantly shut down, leaving me to repeat the process. If I hold down the home button, I can enter what seems to be "Recovery Mode," with a red iTunes Logo, as opposed to the usual blue. From here, all internet sources I have found suggest that I should restore the phone, but that's really where I hit the problem. When I plug the phone in, when in Recovery Mode, I simply receive the "iPhone software update server could not be contacted" error again, leaving the phone not recognized by iTunes. In non-recovery mode, the phone appears to simply turn off so fast that iTunes has no time to find it.
Any one with similar problems or solutions?

This what happened to my iPhone 5 after I updated to iOS 8.0;
The update process was done smootly without problems thru
Over the Air.
Now when I cold start/boot my iPhone 5, my apple logo appears as it was
in iOS 7, but after 30 seconds or so, my Apple Logo dissappears the
screen goes black for 5-6 seconds, but then viola! I am at the Log-On
screen... Then I start using my iPhone.
Just like Chris above, I have done 10 reboots, (complete shut down and
restart), its always the same...
Other than this, my iPhone works just fine. I will not re-install the iOS.
From my past experience, re-installing the iOS does not change
these minor differences...

After PC Suite upgrade erorr with infrared!

Halo to all.
I had before PC Suite PC_Suite_6_84_10_3_eng - everything was ok and were working good on Nokia 8800 and N95 8GB.
Yesterday i made update To PC_Suite_6_85_12_0_eng ( software ask it to make automaticly )
And after update and new instalation I got message:
Problem with infrared connection?
- Make sure that your PC has the required infrared hardware installed.
- Make sure that you have activated infrared on both your PC and your phone. For more information, refer to the manuals for your phone and PC.
- Make sure that your PC and phone use the same infrared speed. To adjust the connection speed, go to Control Panel > Wireless Link > Hardware > Properties > Advanced. In the property list, select Maximum Connect rate and change the rate. For more information, refer to your PC manual.
- For Symbian phones:
- To be able to connect your phone to the PC via infrared, make sure that you have selected to use the infrared connection type on your phone. For more information, refer to your phone manual.
- To be able to connect to the Internet using infrared, make sure that you have selected to use the infrared modem on your phone. For more information, refer to your phone manual.
- Restart both PC and the phone and try to create the connection again.
- If the connection still cannot be established, consult the Nokia PC Suite FAQ Search on the Nokia web site.
When I press ok, this message closed and I see:
Selecet conection type:
- cable conection
- infrared
- bluetooth
But the problem: I cannot selcet cable conection!!!! All radioboxes are not active!!! Also I DONT HAVE INFRARED in my labtop and never had before. Bbut before it was working - now always this erorr message and no possibility to change connection type!
I have make next also: full unninstall, reboot. Instaling old version - same!
Please help me to fix it.
Have Windows XP

(I assume you have now 6.85.12, check from PC Suite -Help -About box and select info (i) and copy-paste all the text to your answer)
Open PC Suite - Settings - Manage connections, make sure all the alternatives (tell what they are) are ticked ?

After iOS 8 upgrade restore from backup not working

Hi,
yesterday I've upgraded to iOS8. After three tries it worked.
But now I'm not able to restore my iPhone5 from Backup. It starts restoring. But the when it's done I've receive the error message without an error nr.
"itunes could not restore the iphone because an error occurred"
Thats it
I've rewetted the iphone, tried on another computer to restore the backup, tried a different internet connection. Nothing. Everywhere the same issue. I've also tried to use a half year old backup just for fun. But the same issue.
I've disconnected other USB devices. No chance
Does anybody has a useful idea?
Thanks.

Hello becksen,
Thanks for using Apple Support Communities.
To troubleshoot this issue with restoring an iTunes backup to your iPhone please follow the steps in the article linked to below.
iOS: If you can't back up or restore from a backup in iTunes
Take care,
Alex H.

DB Connect after BI 7 Upgrade - can extract but not display table contents

Hi,
After an upgrade from 3.1 non-unicode to BI 7 unicode on Windows OS, SQL Server 2005 DB, the DB Connect connection to another SQL Server 2005 database is still established and passes all checks. We are also able to load data from the datasources previously established. However if we right-click the source system -> additional functions -> Select Database Tables (3.x), list the tables/views, double-click a view known to contain data, click 'Display Table Contents' and nothing happens. We can run a load from the datasource connected to the same view.
I have seen one unanswered post with the same issue. If anyone else has come across this problem and has some suggestions, it would be appreciated.
Note we have checked the normal issues on the SQL user having created the views and don't believe this is an authorisation issue. There is no authorization issue posted in SU53.
Support pack level is 16 on Basis and 18 on BW.
Thank you,
Ken

Hi Ken,
The problem has happened in the past because fields in the table/view had lower case letters. This is not allowed. Please check the following documentation:
->http://help.sap.com/saphelp_bw320/helpdata/en/58/
54f9c1562d104c9465dabd816f3f24/frameset.htm
->Modeling ->Source System ->Transferring Data with DB Connect
     ->Requests to Database Tables and Database Views
        ->Naming conventions for fields
If the above is not the cause please check the note 512739 again to make sure everything is configured correctly:
Please make sure in particular that the section III (d) of the note entitled 'Authorizations and visible objects' has been correctly
followed.
Regards,
Des.

Scan not working after windows 10 upgrade."1510 series not detected"

upgraded to windows 10 couple of days back. now scan not working, printing fine.tried updating drivers no joy.Hope HP finds a solution soon.

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

After the last upgrade, my firefox will not open. Task manager says it is running, but I get nothing.

I finally allowed the last update to run... upon completion, my browser window would not open. I rebooted, got the window to open but had no function on the navigation bar. The only way I could navigate the web was to go to my home page, google, search for the web page and click on the results. Refresh also would not work. I did another reboot and now I'm back to no visual evidence of the browser window being open. It seems like every update for the past few months crashes my ability to utilize my add-ons and my ability to see video is almost always compromised. I try to ignore updates but the reminder keeps popping up so frequently it becomes a nusiance and I cave to the pressure!

See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs

After upgrade my keyboard is not recognized by Bluetooth

I just saw an upgrade notice come up on my computer so I hit install etc. Now my iMac 15" is updated to OS X 10.9.3 but the keyboard is no longer recognized by Bluetooth. The green light on keyboard keeps blinking green but it never connects. Any suggestions to help me? Glad I have another Mac to type on in the meantime.

If that doesn't work try pushing the Bluetooth sing in the top bar of your computer screen
There should be a list of all Bluetooth devices
Click on the name of your keyboard and then on connect

I run Mac 10.5.8 and have been using firefox for a little while. Recently, possibly after downloading an upgrade, my attatchments are not opening up in the correct applications, all files are downloaded in .ashx, which is a real pain. Can you help?

'''''

See:
*[[/questions/894442]] OWA 2010/Firefox 8 and ASHX Attachments
*[[/questions/895024]]
Bug 703015 - Outlook web access attachments download as .aspx
Bug 704989 - add workaround for broken Outlook Web App (OWA) attachment handling

Ovi Suite 3.0.0.284 not recognizing my X6

Hi,
I have the same problem just like many users here on forum or another nokia forums around the globe. Ovi Suite kept asking me to change the USB mode on the phone to Ovi suite/PC suite, which it was already in. I have tried almost everything, but problem still exists. This is my first Nokia phone after years and now I can´t use it with my PC. That´s just awesome
Any ideas or we must wait for hotfix from Nokia?

Hey Ankroth,
Did u try the recent ovisuite 3.0.0.290? download it from www.ovi.com/suite
Regards
Like my post? Give me a Kudos...... Ur problem solved? Accept my Solution :-)

After iTunes 7.6 update, iPhone is not recognized by iTunes

I plugged in iPhone after iTunes update and a dialog box popped up that says "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the iPhone, then try again."
Phone is 1.1.3 firmware (update earlier in week and all was working great).
I have wiped software, cleaned registry keys, and reinstalled iTunes on XP computer. I ran a restore process on the iPhone and bricked it. Installed iTunes on a backup Vista 64 Ultimate machine (iTunes works on this platform now, yay!) and restored the phone.
Still hosed on XP, however.

This is happening to me too, but I have an iTouch though. I guess I will try to restore it on another computer if it worked for you.

After PC Suite upgrade Nokia E70 is not recognized

Similar Messages

Maybe you are looking for