After picking shd be reflected in stock overview...

Hi all,
I have problem in stock overview while picking in delivery.. which i mentioned by below example
E.g: stock overview shows that ONLY 50 qty in unrestricted stock so picking is done by adding pick qty in change delivery & it shows in document flow but PGI is not done so 50 qty stock shows in  stock overview and truck is loaded. then again logistic person watching same stock in stock overview & another truck  is loaded by mistake and PGI also not possible bc we have only 50 qty in stock so what we can do any changes or any configration  that after picking  it is reserve in any colum or not reflect that stock in stock overviw so that logistic person can do mistake..
please replay my question as soon as possible....
regards
Manish

Hi
Kindly check the below
1.Check the  availability check on at the delivery item category level  to avoid delivery for the  extra quantity
2. Check the  field  "Check quantity 0" should be maintained as 'B" for the relevant item category
The above two steps can be done in the  below path
  Logistics Execution
     Shipping
          Deliveries
                 Define Item Categories for Deliveries
3.The stock assigned to delivery will shown in  the schedule for delivery in the t code MMBE
Regards
Damu

Similar Messages

  • Exits for LT03 stock overview screen

    Hi Team,
    There is a requirement to add new coloumn to the exsisting layout of LT03 stock overview screen.After adding i need to populate Parent SU details in the new coloumn.I have searched for the exits but not able to find.Can you please help me on this one..
    Thanks and Regards,
    Shakeer

    Hello Shakeer,
    check with the below user exits, if there is any screen exit available which meets your requirement and then implement it.
    MWMTO001  Enhancements for end of transfer order generation
    MWMTO012  Correction of Sorting and Split Transfer Order
    MWMTR001  Exits at the end of transfer rqmnt creation (IM,PP interf.)
    MWM2S001  Exit to Determine 2-Step Picking Characteristic
    MWMBAP01  Enhancement for BAPI WarehouseTransOrder.GetDetail
    MWMBAP02  Enhancement for BAPI WarehouseStock.GetDetail
    MWMD0001  Transfer order print via RLVSDR40
    MWMD0002  Transfer order print as multiple process with RLKOMM40
    MWMIDI07  Enhancement for Output WMPIHU (Create Pick-HU) Inbound
    MWMIDO11  Enhancement for message WMTORD: TO with several items
    MWMIDO12  Enhancement for Output WMPIHU (Pick-HUs) Outbound
    MWMIDO13  Extension for WMMBXY (subsequent tasks after goods move
    MWMPP001  Enhancement WM/PP Interface (automatic TR generation)
    MWMRF001  RF: Influence Display of material description
    MWMRF100  ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0100)
    MWMRF101  ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0101)
    MWMRF102  ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0102)
    MWMRF104  ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0104)
    MWMRF105  ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0105)
    MWMRF106  ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0106)
    MWMRF107  ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0107)
    MWMRF108  ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0108)
    MWMRF151  ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0151)
    MWMRF152  ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0152)
    MWMRF153  ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0153)
    MWMRF170  ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0170)
    MWMRF202  ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)
    MWMRF203  ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0203)
    MWMRF204  ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0204)
    Regards,
    TP

  • Cancel SO after pick release

    Dear Expert,
    I find out that it is not allowed to cancel SO with 'Pick Confirm/Staged' status. The Problem is: if I desire to cancel that SO, how is the work arround for this situation. And how can I return the stock from staging to original subinventory normally. Is subinventory transfer or move order the best solution?
    regards
    Indra Stp

    Hi Indra,
    The process you should follow is to backorder your order line(s). This will release the reservation(s) that pick confirm created against your staged stock.
    You can then cancel your order.
    The process would be the same if you needed to make an amendment to the order after pick confirm except that you wouldn't necessarily need to move your stock back to stores. In the case of an order cancellation, you're right that you should move back the stock. Whether you do this via a subinv transfer (far the easiest) or a requisition move order is your choice.
    Regards,
    Jon

  • Sales order stock not showing in stock overview(MMBE)

    Hi,
    I have a MTO scenario where against the sales order production order has been created.
    Production order has been delivered & the material document showing 101E movement type.
    After that the material has been transfered to another storage location with in the same plant with movement type 311E.
    We can see the sales order no. on each material document.
    But in stock overview no sales order stock is there against the particular sales order and because of this user is not able to create delivery for the same sales order.
    Please guide in this matter.
    Regards,
    Susrikant

    Hi,
    In MMBE, check for the log on the movement type. You can find it in MMBE once the report is displayed. Select the storage location and then check for the Movement of goods from Menu > Environment > Movement types. It will have all the details of quantity moved in and qty moved out. You can easily identify thro' which movement type this material and qty is moved.
    Also check the tcode MB52.
    Hope this helps.
    Thanks
    Mukund S

  • MMBE stock overview - S Loc Level stock not getting displayed - ECC 6 0

    Hello,
    In ECC 6,0 Version, in the MMBE (stock overview) stock is getting displayed only at the Plant level. It is not showing at levels below for eg. S Loc level/Valuation type level. Is there any setting to be activated for this?
    Can any one throw some light?
    Thanks
    Regards
    Kumaran

    Hi
    Before executing MMBE
    have you selected on the initial screen the following :-
    Selection of Display levels
    COCD
    Plant
    Storage location
    batch and
    special stock
    thanks
    Prasanna
    awrd if usefull

  • Stock Overview per plant wise/Storage location wise

    hi
        is there any <b>transaction</b> or <b>report</b> to get Stock overview plantwise/ storagelocationwise ... except MMBE it gives particular material.. i want per particular plant or storage location total materials stock.
    I want stock report similar to <b>MMBE</b> it gives available stock per single material in a palnt but my requirement to print available stock per all materials in a given material along with storagelocation wise/batch wise and total quantity.
    Points guaranteed..
    Message was edited by: Ashok Parupalli
    Message was edited by: Ashok Parupalli

    There's quite a lot you can do in Logistics Info Systems to report on stocks across multiple materials.
    Other than that, it depends on what you really want to show - stock that's physically present (e.g. including vendor-owned consignment), stock that you own (e.g. including customer consignment or toll manufacturers' stocks); do you want to show quantities (doesn't usually make much sense for more than one material, of course, due to varying units of measure) or values, etc.
    Some of these data are quite expensive to read from a runtime perspective, in particular the "special" stocks (e.g. consignment).
    You also have to consider that stock you own but that's not physically present on site (e.g. customer consignment), or GR blocked stock, usually is not assigned to a storage location.
    If you give me some more info about what you're actually trying to achieve, I may be able to help you better.

  • Stock overview on basis of product hierarchy (PRDHA)

    Hello to All,
    Is there any SAP standard report of displaying stock overview on basis of the 'product hierarchy' (Field: PRDHA) or do i have to make a copy of the transaction (MMBE) and add the respective field ..
    Looking forward to your feedback. Thanks
    Regards,
    Shehryar Dahar

    check this and do modifications as per ur requirement.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=15856
    get the PRDHA of MARA then report.
    Regards
    Prabhu

  • Why I can delete a delivery after picking was done?

    Hello,
    Someone knows if it is a bug or a feature that I can delete a delivery although it was already fully picked and the status is "C"?
    I am not sure since when I can delete a delivery even after picking was done, maybe it started after our upgrade to ECC 6.0 but
    Any way I need to change it and I am not sure if it is a bug or some customization cause it?
    Thank you
    Tomer Zimmerman

    Hi Tomer;
    This is a feature of SAP. We are on 4.7 and I tested the above scenario. The delivery gets deleted even if the picking is done. I have not tested using the confirmations.
    I think this is because there is no real impact in accounting or inventory terms. Because picking does not create any transactional dicoments.
    Pls reward if useful.
    Regards,
    Mani

  • MB1B i need to check the stock overview & venodr stock

    HI Experts,
            i need to send the stock to subcontractor..so PO reference mb1b 541 movement type i m sending the stock..here i want to see the stock overview as well as see the vendor stock also.. if there is any setting or threre to check the stock otherwise any enhancement can fulfil this requirement.

    Hi,
    Enter movement type 541, PO referenc and on next screen, click on Environment tab, enter only plant, remove storage location , select Stock Overview -> Stock Material , system will show you stock in Plant for all Storage Location as well as Stock lying at Vendors end, else if tyou want to know stock lying at vendor's end , you can run report MBLB (Stock at subcontractor)
    Regards,
    Vikas

  • How to print custom label print after Pick drop happen

    Dear All,
    I have a requirement,
    Have to print the custom label printing report after pick drop happening.
    can you please suggest how to do this, Seems there is no workflow business event or other methods. please suggest to how do achieve this.
    Thanks in advance.
    Thanks
    satya

    You know, in a user exit or a BADi you can access any variable of the program you want.
    Just find what which program calls the Exit User, put a break-point in it, and find the variable you need to access.
    Then add this kind code in your Exit :
    DATA: l_var TYPE ....
    FIELD-SYMBOLS: <fs_var>    TYPE ANY.
    ASSIGN ('(PGMNAME)variable') TO <fs_var>.
    IF sy-subrc = 0.
      l_var = <fs_var>.
    ENDIF.
    Same thing for a table :
    DATA: lt_var TYPE TABLE OF....
    FIELD-SYMBOLS: <fs_var>    TYPE ANY.
    ASSIGN ('(PGMNAME)table[]') TO <fs_var>.
    IF sy-subrc = 0.
      lt_var[] = <fs_var>.
    LOOP AT lt_var ASSIGNING ...
    ENDLOOP.
    ENDIF.

  • What is imp of Batch indicator in Stock Overview MMBE

    What is imp of Batch indicator in Stock Overview MMBE
    Madan

    Madan,
    I assume we are talking about the "Batch" check box in the "Select Display levels" section.
    if this check box is activated, system displays the stock details at the Batch level also. Basically the aggregation of stock happens like this..
    Batch Stock
    Storage Location Stock (Cumulation of Batch Stock in that Storage Location)
    Plant Stock (Cumulation of all Storage Location stock in that plant)
    Hope this helps....Reward your points if so,
    Regards,
    Prasobh

  • Like MMBE in R/3, is there any t.code to see the stock overview in SCM?

    Experts,
    Like MMBE in R/3, is there any t.code to see the stock overview in SCM?
    Thanks in advance
    Krish

    Please go to /SAPAPO/RRP3 and click on Stock tab. If you use GATP you can even get the details using /SAPAPO/AC03

  • Table for stock overview

    hi
    Can anybody suggest in which table i can get the stock overview details.....i.e. U/R stock, Blocked stock, QI stock etc.
    Thanks
    QQQ

    Hi,
    go to MMBE or MC.9,
    MMBE for a single material ,
    MC.9 for range of materials
    plant level table is MARC,
    storage location level is MARD,
    rgds
    Edited by: lakshmi reddy on Dec 26, 2007 2:34 PM

  • Stock overview option in notification screen (QM01/QM02)

    Dear Friends,
    We are using ECC6.00. QM module is also implemented. In Quality management we create notifications for handling rejections. All stock postings are defined as action boxes. I want in the screen of the notificaiton, the stock overview icon so that prior to posting the stock, i can check the same.Is there any way to get my requirement met.
    Regards,
    M.M

    Dear Sujit,
    Thank you for your immediate reply. Is there any way to get the requirement without using any enhancement. Like using standard screen fields?
    Regards,
    M.M

  • How to extract pick details after pick release with OPM Modules

    Hi, Can someone show me how to extract pick details (for third party warehouse) after pick release released in OPM modules?
    I remembered that I can access interface tables MTL_TXN_REQUEST_HEADER and MTL_TXN_REQUEST_LINES to extract pick detail. But it seems that in OPM modules, it does not use these two tables. Any help are greatly appreciated.
    Calvin

    Hi,
    This problem Could happen when you referesh quality or test system.
    Your delta setup for the related master and transaction data needs to be reinit.
    What happens is when you init. the delta and subsequent delta is all maintained in your source system
    please check Notes 852443,424848,834229
    Hope this helps
    Thanks
    Teja
    Message was edited by:
            Teja badugu

Maybe you are looking for