After processor upgrade to sonnett dual 1.8 ghz system crashes

Hi all,
My system keeps crashin when using the dock or switchin software programs usual suspects are photoshop to illustrator to itunes. The screen freezes and i get no mouse movement or keyboard functionality and i have to force the restart.. only seems to be happening since the upgrade of my processor.. also upgraded RAM and added a expansion card for my 400 gb hard drive..any ideas?
happens at least twice daily...

Hello! You have committed a sin by doing multiple upgrades at once. If you upgrade ram, processor and drives at the same time without running each upgrade to make sure it's stable then it's difficult to troubleshoot but ram is agreeable the most likely culprit. Tom

Similar Messages

  • I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices

    I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices from other manufacturers ...
    People are dissatisfied with the new update a lot, including some of my friends and acquaintances. Is it reasonable to wait until Apple implements the possibility to return to Ios Ios 6 to 7? And how soon it can be done?
    Sorry for my english, i am from Russia.

    I have a similar issue. I recently purchased an iPad Mini, and I started off by backing it up from the apps I had on my iPhone. Now, I have a number of apps that never downloaded and that I don't want on the iPad. Some of these are apps that I don't need, while others are the iPhone versions of apps. There are something like 23 apps that I have no use for, but iTunes tries to install every time I connect. I've also tried clicking the 'Will Install' buttons. There's no way to delete these apps from the iPad without first installing them, as far as I can see, and there's no way to NOT install them, in iTunes.
    It''s not just annoying, it's causing problems with installation of larger files and movies. Now, every time I sync to the computer, I get a warning that I'm over capacity by 580 MB, and larger apps will not install! Clicking Revert and a bunch of other things doesn't work, either. And I can't just delete some of the apps, because I or my wife use them on our phones!

  • Flash Plug in is crashing after recent upgrade. I tried uninstalling, and reinstalling, still crashing. Firefox and Plug-in are current. What else can I do?

    Flash Plug in is crashing after recent upgrade. I tried uninstalling, and reinstalling, still crashing. Firefox and Plug-in are current. What else can I do?

    What I suggest you do here is to use Adobe's uninstaller tool to uninstall Flash first of all: http://kb2.adobe.com/cps/141/tn_14157.html
    Then reboot, go to http://get.adobe.com/flashplayer/ and reinstall it.
    I notice too that you have an outdated version of Shockwave For Director. You can update that via http://get.adobe.com/shockwave/

  • After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

    After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

    Hello there, Kishoresaraogi.
    The following Knowledge Base article provides some great steps to troubleshoot your issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Particularly:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I cannot sync contacts between my iPhone 4s and MacBook Pro after I upgraded the Mac with the latest operating system software upgrade. Even the Mac Store couldn't help...

    I cannot sync contacts between my iPhone 4s and MacBook Pro after I upgraded the Mac with the latest operating system software upgrade. Even the Mac Store couldn't help...

    That is because that sync ability (for contacts and calendars) has been removed. Use iCloud instead.

  • 1.25 167 MHZ processor upgrade for a dual 867 133 MHz bus

    Having upgraded my MDD with a dual 1.25 processor, I am left with a single 1.25 processor at 167 MHZ bus. Can I use this to upgrade a dual 867 MHZ MDD? I know I won't get the original speed due to lower bus freq, but I'd like to use it anyway, especially if the heatsink fits.

    Hi there, that's going to leave you with a single 1 GHz CPU vs. 2 867s, unless you also bump the speed multiplier, but...
    http://www.xlr8yourmac.com/systems/g4mirrored_drive_doors/G4_MDD_CPUModule.htm
    Info on 167MHz Bus Speed Mods for Dual G4 867 (DDR) System ...
    http://www.xlr8yourmac.com/archives/oct02/100802.html
    If you need more help, there are many former xlr8yormac.com/bbs users here that have done such things...
    http://x704.net/bbs/

  • Problem on Raid 0 after processor Upgrade

    Hi, I have an 8 core 2,40  5,1 Mac Pro mid 2010, 2 Seagate 2Tb Barracuda in Raid 0 and Maverick.
    The Disk speed test is 250 mb for second...
    2 weeks ago i bought 2 six core xeon 2,66 and upgraded my Mac Pro, Yesterday i mounted new processors and all is good ( the geebench3 say 26000, before was 15600 )
    But if i do speed test disk no it says 150mb and sometimes 100mb, in fact if i launch protools10 the stress on disk is pretty much more than before processor upgrade and also pretty unstable ( i mean disk performcance unstable ).
    Do i have to reinstall the system? Or maybe there some preferences to delete? caches?
    Any idea?

    [att1.html]
              

  • Upgrading RAM on Dual 2.5 Ghz PowerMac

    Ok, I just bought 8 1gb sticks of Hypervelocity RAM from macramdirect.com for my Dual 2.5 Ghz PowerMac. It already had 2.5gb of RAM sticks in there, so I was going to replace the 2.5 and stick it in 2 other G5's at the place I work at, and just run the 8 1gb sticks in my G5, that I use for video editing. When I stick the 8 1gb sticks in there, I boot it up and the fans kick on and the h/d spins, but nothing happens on the monitor and the power light flashes 2 times like every 5 seconds. So I basically started eliminating problems by starting with only 2 of the 8 sticks in the 1st dual slots. It still didn't fully boot up, give me the chime, and the power light flashed 2 times every 5 seconds. So I installed 2 of the 256mb chips in the 1st layer of the DIMM slots, and 2 of the 1gb sticks in the 2nd layer of the DIMM slots. It boots up completely, I hear the chime. I thought that this G5 could max out at 8gb, but is this totally true. Or can it only max out at probably 7gb, 1 gb short of the supposedly max given by apple??

    Before talking to MacRamDirect, boot into Open Firmware (hold down four keys on startup/restart, doesn't even need to be a cold start):
    CMD + OPT + O + F
    then type three commands -
    reset-nvram
    set-defaults
    reset-all
    You may want or need to use the OPTION key to select your boot drive and reset it in Startup Disk c.p.
    G5s don't always see or recognize the new RAM configuration; sometimes it only "shows up" when loading programs that require more RAM.
    You should also boot from the Apple Hardware Test and run that as well. If all is working and showing up, I would then run Memtest overnight.
    Why nvram or the device tree isn't being updated - no idea - but I have seen this happen and reset-nvram did the trick (also works when swapping hard drives and not showing, though not if you are ADDING a drive).

  • Serious graphical issues after processor upgrade.

    I have a AGP 400 Mhz G4 Gigabit with 640 MB Ram running Tiger X.4.3. I just popped in a 500 Mhz AGP processor and everything "seemed" to be functioning normally for a bit. No Kernel Panics and the system reports back a 500 Mhz processor speed.
    Then I first noticed a problem in the interface for Toast 7.02 with vertical lines evenly spaced. I had to reboot to get rid of them, but they came back.
    Certain desktop pictures, some icons, and some JPGs picked these lines up too. They are evenly spaced and scale along with the image size. They show up in some online images in my browser and they can be turned on/off in certain images by clicking the little "show image with/without ICC" button in GraphicConvertor. The widgets also have dithering and diagonal lines.
    I don't know what "they" are but it's ugly and it seems to coincide with my upgrade.
    Here's a screenshot.
    http://www.2and2.net/Priv/Picture1.png
    I checked my monitor settings and all is normal there. Running 1600 x 1200 at 85 hertz for over a year on a 21" CRT. Changing monitor resolutions merely scales the lines accordingly. Changing number of colors has no effect.
    I've zapped the pram. I've run all the hardware tests in TechTool Pro (all passed). I also ran some unix maintenance stuff (repaired permissions, updated prebindings, and cleared the cache files) and nothing helps.
    I don't want to pull out the new processor!! Was there something else I should have done when I put in the upgrade?
    Please help.

    I don't know what I'm looking for.
    Immediately after installing this software, I went to the control panel and there were some values in there greater than 100% already. I don't know, and the documention is somewhat ambiguous, if that's the reading from the card or the desired reading the software is/will apply. I wish I wrote those down because I then hit the "stock frequencies" button which put the two values to 0.00%
    So here's what I see now-
    Processor: 118.00 Mhz
    0.00%
    Memory: 140.00 Mhz
    0.00%
    So also the documentation say the following...
    "The Stock Frequencies button reverts to factory settings (more precisely, settings stored in ROM, so if the card was already overclocked using Graphiccelerator, these are the frequencies which will be set)"
    What does that mean? Factory settings? (unless?) somebody already overclocked it, the "stock" button reverts back to those previously overclocked settings?? If so, how could I know?
    From System Profiler-
    ATY,Rage128Pro:
    Chipset Model: ATY,Rage128Pro
    Type: Display
    Bus: AGP
    Slot: SLOT-A
    VRAM (Total): 16 MB
    Vendor: ATI (0x1002)
    Device ID: 0x5046
    Revision ID: 0x0000
    ROM Revision: 113-72701-125
    Either way, I still see the problem and I'm not even using the faster processor! I see the problem in only a few system icons in the dock. Finder icon, Dashboard icon, Apple support icon, and trash icon. Trash icon fixed itself for now. I'm not sure if they're left over from before and just need to be reset or what? Force quitting the dock just brings back the same.
    I think I have some hardware issue that is aggravated by this version of Tiger or a faster processor.
    I really need to figure out how to get my version of Apple Hardware Test so I can know for sure.

  • PowerMac G4 (AGP Graphics) not booting after processor upgrade. Help!

    Hey,
    I just bought a Encore/ST G4 SG4-1600 1.6 Ghz (Duo) and trying to get my PowerMac G4 (AGP Graphics) (originally 500Mhz) to run with it.
    I have upgraded the firm ware to 4.2.8f, and restarted the PMU on the Logic Board.
    I have also checked that my logic board is two core compatible.
    The computer just sits there after it's been turned on, the the motherboard is lit up and the all the fans are running, but it stops there, no screen, tone, or anything. Will just sit there with out ever spinning a hard drive.
    If some one could help me get this going, please help!

    I downloaded it, (for Mac OS 10.4.x) but getting a continuos error message reading:
    Programing Not Successful!
    Boot Section 0xF029672E
    Recovery Section 0xC381FF3F
    Main Section 0x73CCD5A8
    This happens everytime I try to run the app. Could it be because it's OS X? I had to intall OS9 to update my firmware.
    It says it's made to work on a PMG4 (agp) so I don't understand what's happening.

  • Can i upgrade to a dual 1.25 ghz from a single 1 ghz?

    hi i have a MDD G4 single 1ghz processor fw 800 mac that i was considering selling because it cant boot to os9 but now im considering keeping it because of its upgrade potential.
    what upgrades are available to me?
    thanks

    Since that board was available in SP 1 GHz, DP 1.25 GHz and DP 1.42 GHz, the short answer is yes. Many here suggest just going up to the DP 1.25 GHz for the most cost-effective upgrade. The difference between the DP 1.25 and DP 1.42 is minimal - 10-13%. From posts I have seen, going from a SP 1.25 to a DP 1.25 will result in about a 40% boost so your difference should be even a little greater. Check the ebay link below for DP listings. That's where I bought mine.
    http://computers.search.ebay.com/G4-MDDApple-Macintosh-ComputersW0QQbsZSearchQQcatrefZC6QQcoactionZcompareQQcoentrypageZsearchQQcopagenumZ1QQfgt pZQQfposZ25427QQfromZR2QQfsooZ2QQfsopZ2QQftrtZ1QQftrvZ1QQlopgZQQsabfmtsZ1QQsacat Z4599QQsadisZ200QQsaobfmtsZinsifQQsaprchiZQQsaprcloZQQsargnZQ2d1QQsaslcZ2QQsbrft ogZ1QQsofocusZbs

  • Memory upgrade on iMac G3 700, help with system crashes

    I tried to do a memory upgrade on my iMac, so I bought two kingston 256 MB PC133 modules, but none will work, the system starts, but hangs in about two minutes after loading the desktop. I went back to use the older memory module wich is an spectek, but I need the upgrade, any ideas?
    Thanks!
    FedericoMG.
    Ps: Sorry about my english... I'm from Argentina... :-P

    Hi Federicomg
    The iMac 700 G3 should have been supplied with 1 stick of 256mb ram. However which is the correct type i am not sure as the Apple specifications for this model state PC100 whereas my iMac G3 700 graphite was supplied with 256 MB PC133-333 SDRAM
    http://support.apple.com/specs/imac/iMacSummer2001.html
    Apple profiler from my iMac this is the original supplied RAM from Apple:-
    DIMM0/J13: Size: 256 MB
    Type: SDRAM
    Speed: PC133-333
    1) I would re-instal the original ram and open system profiler to see what type the ram is.
    2) Keeping the original stick in place add another stick of the new ram and look again in profiler to see if its recognised and again try the second stick to see if there's a problem with one of the sticks.
    I am currently running my iMac with a small upgrade of RAM and the additional RAM is 128MB of PC100 and i have noticed the performance improvement since adding the PC100 so it's working and i have suffered no ill effects doing this..
    paul..

  • I am running Xsan 2 with primary/backup meta controllers and both of my servers showing no link on the Fiber channel cards....have 2 G5 dual 2.3 GHz systems, 6 gig ram, 10.5OS. and PCI-X FC cards.  QLogic 5600 switches.  Looking for the non-obvious

    They have been up and running for over a about a year on XSAN 2 and all of a sudden started having problems with data transter and then won's connect anymore
    Thanks

    Quote
    amd 64=12a @12V
    ati 9800=7.5~10.5a @12V (assuming 90~125 watts) a max load,
    a 9600 ir nvida 5200 used far less power
    so your already at 18a with no fan,s no hd, no cd,no dvd ,no mobo chipset , no mem, no sound..etc
    If you exclude the motherboard, memory, etc like you did there, the amd 64 draws 7.2A @ 12V.
    90~125W for an ATI 9800?! [irony]Are you working for a PSU manufacturer or what?[/irony] That's just absurd.  
    Go read this post to get a feel for the actual power consumption: https://forum-en.msi.com/index.php?postid=297061&sid=#post297061

  • Dual 1.8 GHz G5 only running of one processor

    My dad has a Dual 1.8 GHz G5 and had problems in the past, one of the processors went out. He took it to a repair shop and they switched it to run only off one processor. Apparently after they repaired the computer, they didn't tell it to run on both processors. We found out when we went to About this Mac. How do I tell it to run off both processors again?
    G5 Dual 2.7 GHz, 15-inch PowerBook 1.5 GHz   Mac OS X (10.4.3)  

    Nap is a power saving feature.
    The following processor states are defined:
    ■ Run: The system is running at maximum processing capacity with the processor running at full speed.
    ■ Idle: The system is idling; this is the default state. All clocks are running and the system can return to running code within a few nanoseconds. If the system has no work to do, it will be in idle mode.
    From idle, the processor will enter deep nap state when the system is power-stepped to half frequency. In this state, the processor’s internal frequency is reduced to 1/64 of the maximum frequency. The processor frequency is returned to normal on exit from idle. The exit from idle takes a bit longer than the regular idle nap but is still in the nanoseconds.

  • Authroization issue after the Upgrade for Multiprovider

    Hello Experts,
    After the upgrade has carried out in my Quality system, I'm unable to execute a query because of the authorization issue with Multiprovider. But earlier the same Authorization was assigned to the ID.
    The Role in Q and the Role in P is same. Right now P is with 3.1 and Q is with BI7.
    In both the system I have the same Role. But in Q it says that: Error You have no Authorization for Multiprovider XXXX
    This is happening for only one Multiprovider in Quality system. There is no change in the Multiprovider from earlier structure to the present structure.
    Can anyone give me any idea as to how to solve this issue?
    Many thanks in Advance..
    Thanks
    Raman..

    Hi,
    Look at this link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a07122ae-8216-2a10-c9a5-996717a0648b
    Hope it helps

Maybe you are looking for