After r12 installation error autocofig
Hi,
after install R12 1.1
on rhel 5
while running autocofig takes 3 hours to complet.
ERRORCODE = 0 ERRORCODE_END
please guide me
we have changed ip address of server AFAIK Oracle apps do not refer to IP address so this change should not have impacted anything unless you have changed hostname, ports etc..
The only reason i can thnk off is network issue when autoconfig makes connection with db(hoping it on different server)...but if this is the case then every connection from apps to db should take more time....is their any network change with this IP?
As suggest by husssien did you check autoconfig logs to confirm as where it is stucking....maybe if you can run it again then check at which stage it is taking long time....
Thanks,
JD
Similar Messages
-
Getting error while applyin patch after R12 installation
I applying patch 8940108 after R12 installation. Pls. suggest what needs to be done.
Patch 8940108: Optional component(s) missing : [ oracle.precomp.lang, 11.1.0.7.0 ]
Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
The details are:
Patch 7708340:
Archive Action: Source file "/db01/opt/oracle/product/11.1.0_egebrt/.patch_storage/7708340_Jan_28_2009_11_33_00/files/lib/libpls11.a/pkv.o" does not exist.
'oracle.rdbms, 11.1.0.7.0': Cannot update file '/db01/opt/oracle/product/11.1.0_egebrt/lib/libpls11.a' with '/pkv.o'
Archive Action: Source file "/db01/opt/oracle/product/11.1.0_egebrt/.patch_storage/7708340_Jan_28_2009_11_33_00/files/lib/libpls11.a/pkv.o" does not exist.
'oracle.rdbms.rman, 11.1.0.7.0': Cannot update file '/db01/opt/oracle/product/11.1.0_egebrt/lib/libpls11.a' with '/pkv.o'
ApplySession failed during prerequisite checks: Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
System intact, OPatch will not attempt to restore the system
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 8940108 is a superset of the patch(es) [ 7708340 ] in OH /db01/opt/oracle/product/11.1.0_egebrt
OPatch failed with error code 74Hi;
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 8940108 is a superset of the patch(es) [ 7708340 ] in OH /db01/opt/oracle/product/11.1.0_egebrt
Its mean if you have patch 8940108 on your system already and if you try to apply patch 7708340 than you dont need to apply patch 7708340,coz patch 8940108 already cover patch 7708340.
You can try this
opatch -lsinventory|grep 8940108
Regard
Helios -
Unable to connect opmn after R12 installation
Hello,
After R12 getting error
exiting with status 204
/oracle/R12/dev/inst/apps/dev_devserver/logs/appl/admin/log/adoafmctl.txt
Please guide me
Edited by: user9376205 on Apr 11, 2011 10:48 PMSome people have reported good results with R12 on Windows. I find R12 on Windows about 100 times more flaky than on Linux on identical hardware. Add an external hard drive into the mix, and you have very slim odd of it working correctly, or for very long. External hard drives try to power themselves down at inopportune times when you run Oracle products on them. You also increase your chances of needing a media recovery of your datafiles if your external hard drive loses power, and you have any datafiles there.
It is a couple days work, but I recently upgraded 11.5.10.2 Vision on Linux to R12 and have a 70GB footprint. This easily fits on a laptop 100 or 120 GB (non-perpendicular recording =>stable hard drive). Also the memory footprint is much less on Linux, and I can run R12 fine on 2 GB RAM laptops, even have R12 and 11.5.10.2 with Demantra Demand Planning OAS 10.1.3 running concurrently on a T61 with 4 GB of RAM. I have R12 Windows running on a Windows machine with 3 GB of RAM, and with all the applications up, I can log in, but RAM is at 3 GB and the page file is almost full. I only advise people to install R12 on Windows that have a ton of RAM and patience trying to get it and keep it all running. -
Oracle R12 Installation Error - Validate System Configuration
Hello,
I was doing the oracle apps R12 installation and got this error
=======================
Validate System Configuration
The post-install check inspects your system for a complete installation.
The list below shows the tests that were performed and the results.
Click on the test icon for details.
One or more of the post-install tests did not succeed for this:
Database Availability
HTTP
Virtual Directory
Login page
Configuration Upload
Help page
JSP
=======================
I’ve checked the details which are listed below.
Please help me in solving the issue :(
Configuration Upload
uploading config file at /u05/oracle/TEST/db/tech_st/11.1.0/appsutil/conf_TEST.txt
Failed upload of config file at /db/tech_st/11.1.0/appsutil/conf_TEST.txt
Database Availability
command: su dbuser -c "/tmp/RapidInstall/bin/riwTDBup.sh /u05/oracle/TEST/db/tech_st/11.1.0/TEST_erp.env APPS/APPS"
riwTDBup.sh started at Fri May 25 06:42:59 IST 2012
Parameters passed are : /u05/oracle/TEST/db/tech_st/11.1.0/TEST_erp.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /u05/oracle/TEST/db/tech_st/11.1.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /u05/oracle/TEST/db/tech_st/11.1.0/perl/bin:/u05/oracle/TEST/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u05/oracle/TEST/db/tech_st/11.1.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/u05/Setup12.1.1/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:/root/bin:.
LD_LIBRARY_PATH : /u05/oracle/TEST/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u05/oracle/TEST/db/tech_st/11.1.0/lib:/usr/dt/lib:/u05/oracle/TEST/db/tech_st/11.1.0/ctx/lib
Executable : /u05/oracle/TEST/db/tech_st/11.1.0/bin/sqlplus
riwTDBup.sh exiting with status 3
RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3 command: su appsuser -c "/tmp/RapidInstall/bin/riwTDBup.sh /u05/appl/TEST/inst/apps/TEST_erp/ora/10.1.2/TEST_erp.env APPS/APPS"
riwTDBup.sh started at Fri May 25 06:43:16 IST 2012
Parameters passed are : /u05/appl/TEST/inst/apps/TEST_erp/ora/10.1.2/TEST_erp.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /u05/appl/TEST/apps/tech_st/10.1.2
ORACLE_SID :
TWO_TASK : TEST
PATH : /u05/appl/TEST/apps/tech_st/10.1.2/bin:/usr/bin:/usr/sbin:/u05/appl/TEST/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:/usr/bin:/u05/Setup12.1.1/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:/root/bin
LD_LIBRARY_PATH : /u05/appl/TEST/apps/tech_st/10.1.2/lib32:/u05/appl/TEST/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/u05/appl/TEST/apps/apps_st/appl/sht/12.0.0/lib
Executable : /u05/appl/TEST/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 2
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 2
Help Page
checking URL = http://erp.tez.co.in:8009/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
HTTP
checking URL = http://erp.tez.co.in:8009
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP
checking URL = http://erp.tez.co.in:8009/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.Hi,
I think my linux was corrupted :(
I've done fresh linux installation and after that the R12 installation is complete without any issues :D
Thanks for you help Hussein Sir -
Oracle Apps R12 Installation error on windows
This new discussion is related to below link as last times discussion is locked ,i dont have idea why that discussion is locked(might be due to attachment link that i provided for log file )
"R12 E-Business suite installation error on Windows XP-SP3"
I have added 4 GB RAM and started installation on new fresh windows XP SP3 system with only one C: drive with 300 GB space(including staging area)
below is the log file for error
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 12.1.1.9
>> Install session started : Sun Jan 12 14:57:39 IST 2014
>> Rapid Wizard source location : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz
>> Command Line arguments for this run :
=================================================================
Install Session Information
Host Name : utkarsh.sparsh
Host Operating System : Windows (32-bit)
User running Install : Uday Gite
=================================================================
InstUpgPanel
User action : Install Oracle Applications
Install type : Standard Install
Disabling OCM Configuration
InstallPanel
User action : Create configuration
Description : Creates a new instance configuration.
PortPanel
Selected port pool:
Database Port : 1521
RPC Port : 1626
Web SSL Port : 4443
ONS Local Port : 6100
ONS Remote Port : 6200
ONS Request Port : 6500
Web Listener Port : 8000
Active Web Port : 8000
Forms Port : 9000
Metrics Server Data Port : 9100
Metrics Server Request Port : 9200
JTF Fulfillment Server Port : 9300
MSCA Server Port : 10200-10205
MCSA Telnet Server Port : 10200,10202,10204
MSCA Dispatcher Port : 10800
Java Object Cache Port : 12345
OC4J JMS Port Range for Oacore : 23000-23004
OC4J JMS Port Range for Forms : 23500-23504
OC4J JMS Port Range for Home : 24000-24004
OC4J JMS Port Range for Oafm : 24500-24504
OC4J AJP Port Range for Oacore : 21500-21504
OC4J AJP Port Range for Forms : 22000-22004
OC4J AJP Port Range for Home : 22500-22504
OC4J AJP Port Range for Oafm : 25000-25004
OC4J RMI Port Range for Oacore : 20000-20004
OC4J RMI Port Range for Forms : 20500-20504
OC4J RMI Port Range for Home : 21000-21004
OC4J RMI Port Range for Oafm : 25500-25504
DB ONS Local Port : 6300
DB ONS Remote Port : 6400
Oracle Connection Manager Port : 1521
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
DBNodePanel
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
AppsNodePanel
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
AppsNodePanel
AllNodesPanel
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
Writing configuration file to: C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\conf_FPRD1.txt
Adding ports for Server0_utkarsh
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_utkarsh
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Writing configuration file to: C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\conf_FPRD1.txt
Adding ports for Server0_utkarsh
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_utkarsh
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
Setting temp directory to: C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_db.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
instantiate file:
source : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
dest : C:\DOCUME~1\UDAYGI~1\LOCALS~1\Temp\01121457\utkarsh_FPRD1_apps.xml
Port Availability Check :
-- database node ports --
Database Port available: Port Value = 1521
Database Port Value = 1521...... Available
DB ONS Local Port available: Port Value = 6300
DB ONS Local Port Value = 6300...... Available
DB ONS Remote Port available: Port Value = 6400
DB ONS Remote Port Value = 6400...... Available
-- apps node ports --
RPC Port available: Port Value = 1626
RPC Port Value = 1626...... Available
Web SSL Port available: Port Value = 4443
Web SSL Port Value = 4443...... Available
ONS Local Port available: Port Value = 6100
ONS Local Port Value = 6100...... Available
ONS Remote Port available: Port Value = 6200
ONS Remote Port Value = 6200...... Available
ONS Request Port available: Port Value = 6500
ONS Request Port Value = 6500...... Available
Web Listener Port available: Port Value = 8000
Web Listener Port Value = 8000...... Available
Forms Port available: Port Value = 9000
Forms Port Value = 9000...... Available
Metrics Server Data Port available: Port Value = 9100
Metrics Server Data Port Value = 9100...... Available
Metrics Server Request Port available: Port Value = 9200
Metrics Server Request Port Value = 9200...... Available
JTF Fulfillment Server Port available: Port Value = 9300
JTF Fulfillment Server Port Value = 9300...... Available
MSCA Server Port available: Port Value = 10200
MSCA Server Port available: Port Value = 10201
MSCA Server Port available: Port Value = 10202
MSCA Server Port available: Port Value = 10203
MSCA Server Port available: Port Value = 10204
MSCA Server Port available: Port Value = 10205
MSCA Server Port Value = 10200-10205...... Available
MSCA Dispatcher Port available: Port Value = 10800
MSCA Dispatcher Port Value = 10800...... Available
Java Object Cache Port available: Port Value = 12345
Java Object Cache Port Value = 12345...... Available
OC4J JMS Port Range for Oacore available: Port Value = 23000
OC4J JMS Port Range for Oacore available: Port Value = 23001
OC4J JMS Port Range for Oacore available: Port Value = 23002
OC4J JMS Port Range for Oacore available: Port Value = 23003
OC4J JMS Port Range for Oacore available: Port Value = 23004
OC4J JMS Port Range for Oacore Value = 23000-23004...... Available
OC4J JMS Port Range for Forms available: Port Value = 23500
OC4J JMS Port Range for Forms available: Port Value = 23501
OC4J JMS Port Range for Forms available: Port Value = 23502
OC4J JMS Port Range for Forms available: Port Value = 23503
OC4J JMS Port Range for Forms available: Port Value = 23504
OC4J JMS Port Range for Forms Value = 23500-23504...... Available
OC4J JMS Port Range for Home available: Port Value = 24000
OC4J JMS Port Range for Home available: Port Value = 24001
OC4J JMS Port Range for Home available: Port Value = 24002
OC4J JMS Port Range for Home available: Port Value = 24003
OC4J JMS Port Range for Home available: Port Value = 24004
OC4J JMS Port Range for Home Value = 24000-24004...... Available
OC4J JMS Port Range for Oafm available: Port Value = 24500
OC4J JMS Port Range for Oafm available: Port Value = 24501
OC4J JMS Port Range for Oafm available: Port Value = 24502
OC4J JMS Port Range for Oafm available: Port Value = 24503
OC4J JMS Port Range for Oafm available: Port Value = 24504
OC4J JMS Port Range for Oafm Value = 24500-24504...... Available
OC4J AJP Port Range for Oacore available: Port Value = 21500
OC4J AJP Port Range for Oacore available: Port Value = 21501
OC4J AJP Port Range for Oacore available: Port Value = 21502
OC4J AJP Port Range for Oacore available: Port Value = 21503
OC4J AJP Port Range for Oacore available: Port Value = 21504
OC4J AJP Port Range for Oacore Value = 21500-21504...... Available
OC4J AJP Port Range for Forms available: Port Value = 22000
OC4J AJP Port Range for Forms available: Port Value = 22001
OC4J AJP Port Range for Forms available: Port Value = 22002
OC4J AJP Port Range for Forms available: Port Value = 22003
OC4J AJP Port Range for Forms available: Port Value = 22004
OC4J AJP Port Range for Forms Value = 22000-22004...... Available
OC4J AJP Port Range for Home available: Port Value = 22500
OC4J AJP Port Range for Home available: Port Value = 22501
OC4J AJP Port Range for Home available: Port Value = 22502
OC4J AJP Port Range for Home available: Port Value = 22503
OC4J AJP Port Range for Home available: Port Value = 22504
OC4J AJP Port Range for Home Value = 22500-22504...... Available
OC4J AJP Port Range for Oafm available: Port Value = 25000
OC4J AJP Port Range for Oafm available: Port Value = 25001
OC4J AJP Port Range for Oafm available: Port Value = 25002
OC4J AJP Port Range for Oafm available: Port Value = 25003
OC4J AJP Port Range for Oafm available: Port Value = 25004
OC4J AJP Port Range for Oafm Value = 25000-25004...... Available
OC4J RMI Port Range for Oacore available: Port Value = 20000
OC4J RMI Port Range for Oacore available: Port Value = 20001
OC4J RMI Port Range for Oacore available: Port Value = 20002
OC4J RMI Port Range for Oacore available: Port Value = 20003
OC4J RMI Port Range for Oacore available: Port Value = 20004
OC4J RMI Port Range for Oacore Value = 20000-20004...... Available
OC4J RMI Port Range for Forms available: Port Value = 20500
OC4J RMI Port Range for Forms available: Port Value = 20501
OC4J RMI Port Range for Forms available: Port Value = 20502
OC4J RMI Port Range for Forms available: Port Value = 20503
OC4J RMI Port Range for Forms available: Port Value = 20504
OC4J RMI Port Range for Forms Value = 20500-20504...... Available
OC4J RMI Port Range for Home available: Port Value = 21000
OC4J RMI Port Range for Home available: Port Value = 21001
OC4J RMI Port Range for Home available: Port Value = 21002
OC4J RMI Port Range for Home available: Port Value = 21003
OC4J RMI Port Range for Home available: Port Value = 21004
OC4J RMI Port Range for Home Value = 21000-21004...... Available
OC4J RMI Port Range for Oafm available: Port Value = 25500
OC4J RMI Port Range for Oafm available: Port Value = 25501
OC4J RMI Port Range for Oafm available: Port Value = 25502
OC4J RMI Port Range for Oafm available: Port Value = 25503
OC4J RMI Port Range for Oafm available: Port Value = 25504
OC4J RMI Port Range for Oafm Value = 25500-25504...... Available
OS User and Group Check
Domain=UTKARSH
,Username=Uday Gite
,PC-Name=UTKARSH
User belongs to the Administrators Group.
Port Uniqueness Check :
-- database node ports --
-- apps node ports --
All ports are unique.
File System Check :
-- database node mount point --
Database ORACLE_HOME created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0
Database ORACLE_HOME admin folder created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil
Database ORACLE_HOME temp folder created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\temp
Database Install Log Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\log\FPRD1_utkarsh
Database Install Out Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac
Database Install Out Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac
OCM configuration target directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\clone\\
Database System File Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database Log File Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database Transaction File Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database Archive File Directory available:
Mount Point = C:\OracleApps\oracle\FPRD1\db\apps_st\data
Database OraInventory File Directory created:
Mount Point = c:\temp
-- apps node mount point --
APPL_TOP created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
APPL_TOP admin created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl\admin
APPL_TOP mount 2 available:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
APPL_TOP mount 3 available:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
APPL_TOP mount 4 available:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
COMMON_TOP created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\comn
JAVA_TOP created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\apps_st\comn\java\classes
Temp Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp
APPL_TOP admin Install Log Directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\admin\log
Apps ORACLE_HOME created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.3
Tools ORACLE_HOME created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.2
OCM configuration target directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.3\appsutil\clone\\
OCM configuration target directory created:
Mount Point = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.2\appsutil\clone\\
Apps ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Tools ORACLE_HOME OraInventory File Directory available:
Mount Point = c:\temp
Writing configuration file to: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\conf_FPRD1.txt
Adding ports for Server0_utkarsh
Setting port s_db_ons_localport to 6300
Setting port s_db_ons_remoteport to 6400
Setting port s_cmanport to 1521
Adding ports for Server1_utkarsh
Setting port s_rpcport to 1626
Setting port s_webssl_port to 4443
Setting port s_ons_localport to 6100
Setting port s_ons_remoteport to 6200
Setting port s_ons_requestport to 6500
Setting port s_webport to 8000
Setting port s_active_webport to 8000
Setting port s_formsport to 9000
Setting port s_metdataport to 9100
Setting port s_metreqport to 9200
Setting port s_jtfuf_port to 9300
Setting port s_mwaPortNo to 10200-10205
Setting port s_mwaTelnetPortNo to 10200,10202,10204
Setting port s_mwaDispatcherPort to 10800
Setting port s_java_object_cache_port to 12345
Setting port s_oacore_jms_portrange to 23000-23004
Setting port s_forms_jms_portrange to 23500-23504
Setting port s_home_jms_portrange to 24000-24004
Setting port s_oafm_jms_portrange to 24500-24504
Setting port s_oacore_ajp_portrange to 21500-21504
Setting port s_forms_ajp_portrange to 22000-22004
Setting port s_home_ajp_portrange to 22500-22504
Setting port s_oafm_ajp_portrange to 25000-25004
Setting port s_oacore_rmi_portrange to 20000-20004
Setting port s_forms_rmi_portrange to 20500-20504
Setting port s_home_rmi_portrange to 21000-21004
Setting port s_oafm_rmi_portrange to 25500-25504
File Space Check :
-- database node space checks --
Disk space on system acceptable:
Database ORACLE_HOME = C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0
required = 5600.0
actual = 249592.6953125
Disk space on system acceptable:
Database System File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 20200.0
actual = 243992.6953125
Disk space on system acceptable:
Database Log File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 950.0
actual = 223792.6953125
Disk space on system acceptable:
Database Transaction File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 103350.0
actual = 222842.6953125
Disk space on system acceptable:
Database Archive File Directory = C:\OracleApps\oracle\FPRD1\db\apps_st\data
required = 64500.0
actual = 119492.6953125
-- apps node space checks --
Disk space on system acceptable:
APPL_TOP = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 5800.0
actual = 54992.6953125
Disk space on system acceptable:
APPL_TOP mount 2 = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 2800.0
actual = 49192.6953125
Disk space on system acceptable:
APPL_TOP mount 3 = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 8400.0
actual = 46392.6953125
Disk space on system acceptable:
APPL_TOP mount 4 = C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
required = 3100.0
actual = 37992.6953125
Disk space on system acceptable:
COMMON_TOP = C:\OracleApps\oracle\FPRD1\apps\apps_st\comn
required = 3200.0
actual = 34892.6953125
Disk space on system acceptable:
Apps ORACLE_HOME = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.3
required = 1400.0
actual = 31692.6953125
Disk space on system acceptable:
Tools ORACLE_HOME = C:\OracleApps\oracle\FPRD1\apps\tech_st\10.1.2
required = 1400.0
actual = 30292.6953125
Disk space on system acceptable:
Temp Directory = C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp
required = 1024.0
actual = 28892.6953125
Host/Domain
command: ping -n 1 utkarsh
Pinging utkarsh.sparsh [10.10.12.6] with 32 bytes of data:
Reply from 10.10.12.6: bytes=32 time<1ms TTL=128
Ping statistics for 10.10.12.6:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has succeeded
command: ping -n 1 utkarsh.sparsh
Pinging utkarsh.sparsh [10.10.12.6] with 32 bytes of data:
Reply from 10.10.12.6: bytes=32 time<1ms TTL=128
Ping statistics for 10.10.12.6:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has succeeded
System Utilities
command: cmd.exe /c C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\OracleApps\Cygwin\bin C:\OracleApps\VIS2008\VC\bin
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
/cygdrive/c/WINDOWS/system32/cl
'cc' is available.
/usr/bin/link
'link' is available.
ERRORCODE = 0 ERRORCODE_ENDThe system cannot find the path specified.
System Utilities Availability test has succeeded
AllNodesPanel
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
Service Name: utkarsh
Node Name: _utkarsh
Operating System: _Windows (32-bit)
DoInstallPanel - Summary Text
The Rapid Install Wizard will now install the following:
DoInstallPanel - User continued install at warning dialog.
Starting from Rapid Install Full Stage area C:\OracleApps\stageR12\oraDB\Disk1
Exception thrown in getAllProductIDs. 0
RapidWiz location: C:\OracleApps\stageR12\startCD\Disk1\rapidwiz
Install Media location: C:\OracleApps\stageR12\startCD\Disk1
Database ORACLE_HOME: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0
Database SID: FPRD1
Database Context Name : FPRD1_utkarsh
Creating DB Context: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\restart.xml
Exception thrown in getAllProductIDs. 0
RapidWiz location: C:\OracleApps\stageR12\startCD\Disk1\rapidwiz
Install Media location: C:\OracleApps\stageR12\startCD\Disk1
APPL_TOP location: C:\OracleApps\oracle\FPRD1\apps\apps_st\appl
Database SID: FPRD1
APPL_TOP Context Name : FPRD1_utkarsh
INST_TOP location: C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh
Creating Apps Context: C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\appl\admin\FPRD1_utkarsh.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
instantiate file:
source : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
dest : C:\OracleApps\oracle\FPRD1\instance\apps\FPRD1_utkarsh\temp\restart.xml
Processing DriverFile = C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Processing DriverFile = C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
Running Instantiation Drivers for C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
Total number of processes in Current Install 5
Processing DriverFile = C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Creation of Directory - C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh Succeeded.
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adrun11g.cmd
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd
backup : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd to C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac\adrun11g.cmd
instantiate file:
source : C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrundb.cmd
backup : C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrundb.cmd to C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\out\FPRD1_utkarsh\templbac\adrundb.cmd
Step 0 of 5
Command: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd
Processing Step 1 of 5
Executing: C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\temp\FPRD1_utkarsh\adrun11g.cmd
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM $Header: adrun11g.cmd 120.11 2009/03/11 21:22:03 marderiu noship $
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM ###############################################################
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM ###############################################################
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>REM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>(set date=Sun 01/12/2014 )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>(set time=03:05 PM )
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 11g RDBMS : Sun 01/12/2014 03:05 PM
STARTED INSTALL PHASE : 11g RDBMS : Sun 01/12/2014 03:05 PM
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>SET JRE_PATH=C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
C:\OracleApps\stageR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jlib\java;C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;C:\OracleApps\stageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;C:\OracleApps\stageR12\startCD\Disk1\ra"R12 E-Business suite installation error on Windows XP-SP3"
Your OS is not supported.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) (Doc ID 761567.1)
Log file located at C:\OracleApps\oracle\FPRD1\db\tech_st\11.1.0\appsutil\log\FPRD1_utkarsh\ApplyDatabase_01121856.log
Any details about the error in this log file?
Please review log files mentioned in (How to locate the log files and troubleshoot Rapid Install for Release 12.0.x and 12.1.x (Doc ID 452120.1)) and upload them in one zip file to any free hosting website and post the link here. Please do NOT copy/paste the contents of the log files in this thread.
Thanks,
Hussein -
Not able to open forms After R12 installation
Hi,
I recently installed R12.0.4 on windows 2003 sp1. Post Installation tests were successful, and I am able to login with no issues. But when I try to open any form, no form is opening.
Thanks,
Raj
~ moving this to R12 Forum
Edited by: CalvinNHobbes on Mar 14, 2009 3:56 PMDuplicate thread ..
Not able to open R12 forms after successful installation
Re: Not able to open R12 forms after successful installation. -
DNS error when launching Application login page after R12 installation
Hi ,
I installed R12.0.4 on windows server 2003.
After installation when I launch the home page, its giving dns error saying that <domainname>.<hostname> cannot be loaded.
I checked the apache alert log, it is trying to access an IP that is commented out in the host file. I am not sure where it is picking it up from. I installed loopback adapter before the installation and the entries in the host file also seem fine. Please help me out, this is the 2nd installation but the issue is still not resolved. Please let me know if you need anymore details.
Thanks !Hi Dharmshila,
Since you were not able to access the application URL using the IP Address then I believe it is an issue with the application/database services. To verify that all application services are up and running properly, please do the following:
- Open a new DOS session
- cd %INST_TOP%\apps\<SID>_<hostname>\admin\scripts
- Issue "adopmnctl.sh status"
- You should get something similar to the following:
Checking status of OPMN managed processes...
Processes in Instance: PROD_db2.db2.domain.com
-------------------+--------------------+---------+---------
ias-component | process-type | pid | status
-------------------+--------------------+---------+---------
OC4J | oafm | 3800 | Alive
OC4J | forms | 2528 | Alive
OC4J | oacore | 3112 | Alive
HTTP_Server | HTTP_Server | 172 | Alive
exiting with status 0
ERRORCODE = 0 ERRORCODE_ENDRegards,
Hussein -
After effects installation error
Im trying to install after effects CS5, and i get this error.
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 2 error(s), 28 warning(s)
WARNING: Display requirements not met for {288DB08D-0708-4A94-B055-55B99E39EB62}
WARNING: OS requirements not met for {288DB08D-0708-4A94-B055-55B99E39EB62}
WARNING: Display requirements not met for {33A3F995-8333-4676-8D6F-AB7674BB52EA}
WARNING: OS requirements not met for {33A3F995-8333-4676-8D6F-AB7674BB52EA}
WARNING: Display requirements not met for {565DE707-5798-4FC3-8DF6-0F58A348A9B0}
WARNING: OS requirements not met for {565DE707-5798-4FC3-8DF6-0F58A348A9B0}
WARNING: Display requirements not met for {5DDABB74-A879-4BE7-A4C6-FD41793942DB}
WARNING: OS requirements not met for {5DDABB74-A879-4BE7-A4C6-FD41793942DB}
WARNING: Display requirements not met for {694213D7-1E0E-4C8F-B822-E2E3680C0FCE}
WARNING: OS requirements not met for {694213D7-1E0E-4C8F-B822-E2E3680C0FCE}
WARNING: Display requirements not met for {7816FDDE-40D4-482D-AD7D-97858985DB3E}
WARNING: OS requirements not met for {7816FDDE-40D4-482D-AD7D-97858985DB3E}
WARNING: Display requirements not met for {AAE6F374-91CB-45FB-9282-4CFA0DED2088}
WARNING: OS requirements not met for {AAE6F374-91CB-45FB-9282-4CFA0DED2088}
WARNING: Display requirements not met for {B8D286BC-A68D-4E74-9F68-8756A49896D8}
WARNING: OS requirements not met for {B8D286BC-A68D-4E74-9F68-8756A49896D8}
WARNING: Display requirements not met for {C0AA232E-BD1B-40B5-A176-A2BEB67FFAE1}
WARNING: OS requirements not met for {C0AA232E-BD1B-40B5-A176-A2BEB67FFAE1}
WARNING: Display requirements not met for {CD29B5CA-4727-4114-9AD9-25CCCE6E4014}
WARNING: OS requirements not met for {CD29B5CA-4727-4114-9AD9-25CCCE6E4014}
WARNING: Display requirements not met for {DA1B174B-4297-467C-9EF8-0AB8D4D5171E}
WARNING: OS requirements not met for {DA1B174B-4297-467C-9EF8-0AB8D4D5171E}
WARNING: Display requirements not met for {DE5DE662-2ECB-4D93-967B-221FBCC8A736}
WARNING: OS requirements not met for {DE5DE662-2ECB-4D93-967B-221FBCC8A736}
WARNING: Display requirements not met for {F319804F-E3A4-4C02-8AEC-CB39A4F6447E}
WARNING: OS requirements not met for {F319804F-E3A4-4C02-8AEC-CB39A4F6447E}
WARNING: Display requirements not met for {F9C71630-0EE3-475C-9E2B-ED95AE197DBD}
WARNING: OS requirements not met for {F9C71630-0EE3-475C-9E2B-ED95AE197DBD}
ERROR: Found payload conflicts and errors:
ERROR: - Adobe InDesign CS5 Application Base Files depends on Required Common Fonts Installation to be installed.
FATAL ERROR: Conflicts were found in the selected payloads. Halting installation.
I dont understand why, im running windows 7 64 bit
4 gb DDR2 ram
intel core2duo E7500 @ 2.94ghz
ATI raidon HD 2400
can any one help me?ERROR: 46 Failed to add Font 'C:\Windows\Fonts\KozGoPro-Heavy.otf'. Error: 2
ERROR: 46 Command ARKFontCommand failed.
ERROR: 46 Failed to remove Font 'C:\Windows\Fonts\KozGoPro-Heavy.otf'. Error: 2
ERROR: 46 Error rolling back command ARKFontCommand
ERROR: 6 Unable to delete file copy at "C:\Windows\Fonts\AdobeArabic-Bold.otf" Error 5 Access is denied.
ERROR: 6 Error rolling back command ARKMoveFileCommand
ERROR: Error code: 1
ERROR: The following payload errors were found during install:
ERROR: - Adobe Media Player: Install failed
ERROR: - Adobe Bridge CS5: Install failed
ERROR: - Recommended Common Fonts Installation x64: Install failed
ERROR: - DeviceCentral_DeviceCentral3LP-en_GB: Install failed
ERROR: - Adobe After Effects CS5 Third Party RoyaltyContent Wrapper: Install failed
ERROR: - AdobeHelp: Install failed
ERROR: - Adobe After Effects CS5 Third Party Content Wrapper: Install failed
ERROR: - Photoshop Camera Raw (64 bit): Install failed
ERROR: - Adobe After Effects CS5 Support: Install failed
ERROR: - Adobe After Effects CS5_AdobeAfterEffects10en_USLanguagePack: Install failed
ERROR: - DeviceCentral: Failed due to Language Pack installation failure
ERROR: - Required Common Fonts Installation x64: Install failed
ERROR: - AdobeColorVideoProfilesAE CS5: Install failed
ERROR: - Adobe After Effects CS5 Presets: Install failed
ERROR: - Pixel Bender Toolkit: Install failed
ERROR: - Adobe After Effects CS5: Failed due to Language Pack installation failure
ERROR: - AdobeMotionPicture CS5: Install failed
ERROR: - Adobe AIR: Install failed
Search the same string above to find when the error occured.
Exit Code: 6 - Silent workflow completed with errors
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
im guessing thats what you wanted -
Hi:
I started to installing R12 on XP this morning and it stops right now at Validate system configuration: HTTP, Virtual Directory, Login Page, Help Page and JSP are all failed.
Two listeners are up, DB is up, IP address in ipconfig and hosts file are the same.
Two listener names are Oracle_VIS_db111_RDBMSTNSListenerVIS and OracleTNSListenerAPPS_VIS, are they right?
There is one thing wired this time: I was prompted (don't remember exactly) "JS2 is blocked, do you want to unblock it." twice and I said yes to unblock during the installation.
Please guide me to fix the issue. Thanks a log.Hussein:
I found the conf_VIS and continued. Got the same problem:
HTTP
checking URL = http://p23g.home.com:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Help Page
checking URL = http://p23g.home.com:8000/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Virtual Directory
RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP
checking URL = http://p23g.home.com:8000/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button. -
After Effects Installation error: Invalid Type Context
I am currently working with Creative Cloud CS6 After Effects on a Windows 7 Toshiba Satellite, Core i3. I've been having trouble opening the program suddenly. I thought it might be due to a plug in which I had been trying to get working with both my After Effects and Premier (which works fine btw) to use to read a specific video coversion file (AVS). It didn't ever work so I unistalled all the plug ins I could find, uninstalled After Effects and reinstalled it. Then I started getting the error "Invalid type context" and AE would crash. I've uninstalled and re-installed twice and still cannot get AE past this error.
Edit: Got a chance to write dow the info message after the error:
"After Effects error: Crash in Progress. Last logged message was: <1588> <ae.blitpipe> <2> Making new context"
I've looked for help in the FAQ and also done a couple searches in the forums, but found no topics about this type of error. Any thoughts?1. I've uninstalled all files pertaining to AVS conversion from my computer.
2. I've given After effects full permissions through my windows firewall and McAffe too.
3. I've reinstalled twice since my first post.
4. I've stopped Adobe QT32 from running while AE loads.
5. I've run the program as an administrator and tried running it configured for Vista OS.
6. I've removed all preferences and cannot find any folder for AE preferences in my AppData folder.
I'm still unable to keep the program from crashing as it initializes the user interface (farther along than before). I'm still getting the Invalid Type Context file. It brings up a save project option, which I haven't tried as I haven't gotten far enough along in AE to have any work to save.
I did get this detail report in an attempt to diagnose the problem:
C:\Users\Darci\AppData\Local\Temp\WER3C3.tmp.WERInternalMetadata.xml
C:\Users\Darci\AppData\Local\Temp\WER2104.tmp.appcompat.txt
C:\Users\Darci\AppData\Local\Temp\WER2EBB.tmp.mdmp
I really need help as I'm at the end of all possible suggestions for this type of problem. -
Unable to start APPS after R12 installation. But, DB is UP
Hi,
I have installed R12 on my laptop with External Hard drive connected. The installation completed successfully. I can connect to the DB tier. But, apps... sometime it connects and sometimes it doesn't. I was wondering is it something to do with the services I am starting?? Here is the sequence of the services I start for R12 Apps.
OracleServiceVIS
OracleVIS_db102_RDBMSTNSListenerVIS
OracleVIS_TOOLS_c_oracle_VIS_apps_tech_st_10_1_2TNSListenerAPPS_VIS
Oracle Process Manager for VIS_bhaskara
Do I need to start any extra services or the Order in which I am starting the services is not correct???
Thanks a lot for you help.
BhaskaraSome people have reported good results with R12 on Windows. I find R12 on Windows about 100 times more flaky than on Linux on identical hardware. Add an external hard drive into the mix, and you have very slim odd of it working correctly, or for very long. External hard drives try to power themselves down at inopportune times when you run Oracle products on them. You also increase your chances of needing a media recovery of your datafiles if your external hard drive loses power, and you have any datafiles there.
It is a couple days work, but I recently upgraded 11.5.10.2 Vision on Linux to R12 and have a 70GB footprint. This easily fits on a laptop 100 or 120 GB (non-perpendicular recording =>stable hard drive). Also the memory footprint is much less on Linux, and I can run R12 fine on 2 GB RAM laptops, even have R12 and 11.5.10.2 with Demantra Demand Planning OAS 10.1.3 running concurrently on a T61 with 4 GB of RAM. I have R12 Windows running on a Windows machine with 3 GB of RAM, and with all the applications up, I can log in, but RAM is at 3 GB and the page file is almost full. I only advise people to install R12 on Windows that have a ton of RAM and patience trying to get it and keep it all running. -
Im experiencing problems with MAX DB installing NetWeaver CE 7.1 SP1 on Windows 2003 Server Standard Edition SP 1 Spanish.
The install.log shows the following message:
<i>executeCommands(): Try to establish dbmcli session
Sep 19, 2007 5:11:13 PM [Info]: executeCommands() MaxDB: connect failed: com.sap.dbtech.rte.comm.RTEException: Cannot connect to host localhost [Connection refused: connect], -813.
Sep 19, 2007 5:11:13 PM [Info]: executeCommands() MaxDB: connection release failed: java.lang.NullPointerException</i>
The steps.xml shows this line:
<i><step start="20070919171109" end="20070919171113" description="Init parameter file" className="com.sap.inst.maxdb.xpf.InitParamFile" status="error" name="INIT_PARAM"/></i>
Ive tried the same installation on my work notebook with XP SP 2 Spanish and it works fine
Thanks in advanced.Hello Vladimir,
I saw this thread yesterday, but is seems that doesnt work on my system. If I try to start the service manually, after this installation error, the service doesnt start and the application registry of the system shows this error:
<i>- ERROR TID: 0x11BC PID: 0x11AC MsgID: 18358
; Could not open file C:\sapdb\data\config\CE2 for read, rc = 2.</i>
I tried to create a MaxDB data base with the MAXDB install wizard and it worked. I cant understand where is the problem.
Thanks -
ERROR 2024-05-21 / 4.7 ee installation error
hi sap guru's
i trying to installation 4.7 ee after finishing installation error is showing
what is this error how to finish my 4.7 installation
i am using win 2003 OS,90 external drive for sap ,12 gb c drive ,50 gb d drive
INFO 2024-05-21 08:05:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2024-05-21 08:05:09
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPVIEW.log
ERROR 2024-05-21 08:05:12
FJS-00012 Error when executing script.
INFO 2024-05-21 07:46:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2024-05-21 07:48:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2024-05-21 07:49:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2024-05-21 07:51:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2024-05-21 07:52:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2024-05-21 07:53:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2024-05-21 08:05:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2024-05-21 08:05:09
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPVIEW.log
ERROR 2024-05-21 08:05:12
FJS-00012 Error when executing script.
<b>SAPVIEW.LOG FILE SHOWSING</b>
DB) ERROR: DDL statement failed
(CREATE VIEW "APPL_FUGRG" ( "AREA" , "DEVCLASS" , "OBJ_NAME" ) AS SELECT T0001."AREA", T0002."DEVCLASS", T0002."OBJ_NAME" FROM "TLIBG" T0001, "TADIR" T0002 WHERE T0001."AREA" = T0002."OBJ_NAME" AND T0002."PGMID" = 'R3TR' AND T0002."OBJECT" = 'FUGR')
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=0027D658,usrhp=002BEFE4)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=0027D658,srvhp=0027D464)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
F:\usr\sap\ERP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
F:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20240521080509thank you umesh
u mean , shall i remove SPACE BETWEEN SAPINST ORACLE
"C:\SAPinst ORACLE". to like this "C:\SAPinstORACLE"
am i right -
R12 installation giving me error [while loading shared libraries: librt.so]
Hello ..
I am installing Fresh R12 installation on Fedora. I was doing Single node installation. Installation was going fine but at the point when it said run "autoconfig.sh" for APPS_TIER. I went to $INST_TOP/admin/scripts and ran "autoconfig.sh". After that installer showed me all the errors and when i try to see the log file.
I am getting following errors.
[oracle@aurie / ]$ ls
ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
[oracle@aurie / ]$ su - root
su: error while loading shared libraries: libcrypt.so.1: cannot open shared object file: No such file or directory
Now, I cant do anything on this machine, I try rebooting it but no matter what command i try to run i am getting above error.
Cant find any solution online.
any help would be appreciated.
ThanksHello Hussein,
I chnaged my Fedora to following ..
[root@aurie /]# cat /etc/issue
Red Hat Enterprise Linux Server release 5 (Tikanga)
Kernel \r on an \m
[root@aurie /]# cat /proc/version
Linux version 2.6.18-8.el5 ([email protected]) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Jan 26 14:15:21 EST 2007
But installer is failing at the end of DB installation and it is not able to create database
==== ApplyDatabase_05092341.log ===========
Executable : /d01/oracle/VIS/db/tech_st/11.1.0/bin/sqlplus
The log information will be written to
/d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/adcrdb_VIS.txt
Creating the control file for VIS_aurie database ...
exit_code=127
Checking for errors ...
.end std out.
***sqlplus: error while loading shared libraries: libclntsh.so.11.1: cannot open shared object file: No such file or directory***
***egrep: /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/adcrdb_VIS.txt: No such file or directory***
**.end err out.**
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
=============
============05092156.log============
Processing Disk68....
^M
runProcess_2
Statusstring Registering Database
Executing command: /R12_setup/startCD/Disk1/rapidwiz/jre/Linux/1.6.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/VIS_aurie.xml -stage /R12_setup/startCD/Disk1/rapidwiz -showProgress -phase reg -nopromptmsg
Log file located at /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/ApplyDatabase_05092341.log
^M
| 0% completed
runProcess_3
Statusstring Configuring Database
Executing command: /R12_setup/startCD/Disk1/rapidwiz/jre/Linux/1.6.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/VIS_aurie.xml -stage /R12_setup/startCD/Disk1/rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/ApplyDatabase_05092342.log
^M
| 0% completed ^M
/ 0% completed ^M
- 0% completed ^M
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Processing DriverFile = /R12_setup/startCD/Disk1/rapidwiz/template/adridb.drv
Running Instantiation Drivers for /R12_setup/startCD/Disk1/rapidwiz/template/adridb.drv
instantiate file:
source : /R12_setup/startCD/Disk1/rapidwiz/template/adrun11g.sh
dest : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrun11g.sh
backup : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrun11g.sh to /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/VIS_aurie/templbac/adrun11g.sh
setting permissions: 755
setting ownership: oracle:dba
instantiate file:
source : /R12_setup/startCD/Disk1/rapidwiz/template/adrundb.sh
dest : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh
backup : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh to /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/VIS_aurie/templbac/adrundb.sh
setting permissions: 755
setting ownership: oracle:dba
Step 0 of 5
Command: /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrun11g.sh
Step 1 of 5: Doing UNIX preprocessing
Processing Step 1 of 5
Step 1 of 5
Command: /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh
Step 2 of 5: Doing UNIX preprocessing
Processing Step 2 of 5
Executing: /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh
STARTED INSTALL PHASE : DATABASE : Sun May 10 09:33:17 PDT 2009
Preparing environment to install databases ...
Setting LD_LIBRARY_PATH to - /R12_setup/startCD/Disk1/rapidwiz/lib/Linux -
Setting PATH to - /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
Setting CLASSPATH to - /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
... installing VISION demo database
FINISHED INSTALL PHASE : DATABASE : Sun May 10 09:33:18 PDT 2009
/d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh has succeeded
=============
Now, I am again hitting the same issue .. whatever I try to do after this fail installation i am getting following
*[oracle@aurie 11.1.0]$ ls*
ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
*[oracle@aurie 11.1.0]$ cat /etc/issue*
cat: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
*[oracle@aurie 11.1.0]$ cd /*
*[oracle@aurie /]$ ls*
ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory -
after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode
Maybe you are looking for
-
How can I export a project on an external drive in the latest version of iMovie?
Before the latest release of iMovie I easily managed to export a project on an external usb drive and re-import such project on a different Mac... In the latest iMovie version, however, I cannot see my drive any more.. So, how can I export a project
-
Graphics Card Not Working In My HP Pavilion g4 1314tx Laptop
Hi, My Hp Pavilion G4 1314 tx Laptop is not starting up .When I asked hp store people they said graphics card has to be replaced.My graphics card is AMD Radeon HD 7450M (1 GB DDR3 dedicated) I'm in India but not able to find
-
Hi, Dumb question from a java programmer working for 7+ years, but do I need both the JDK and the JRE? Obviously, a JRE is included in the JDK. The JDK is 150 MB and the JDK is also 150 MB relatively, if I recall correctly. This is 300 MB of Java, do
-
Viewer is confused? What the heck is going on?
I am playing with the sample webdemo files under CMC in Crystal 10. When I try viewing a report I was getting red X's for all my images. I traced the path to find I had spelled the virtual directory "crystalreportviewers" wrong. (this virtual path i
-
Could java interpreter execute ANY classes /or maybe automatically download it first/ remotely from network via HTTP, and not only from local disk? If yes, how this could be done?