After Range Issue

Hello
I've a requirement to display two dimensions along the Rows and one across columns, for which i had used evdre.
Now, i need the subtotals after each product/customer.
For this purpose i've used a before range, which displays the subtotals before each customer, followed by the various products of each customer.
To my surprise, on expand, the Before range disappears.
Kindly assist

Try to adjust the wireless settings on the router...Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Under the Wireless tab,Change the Channel Width to 20MHz only and Channel to 11..Under the Advanced Wireless Settings
Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...Now,check.

Similar Messages

After range and formula expansion

Hi,
I' ve the same issue, i need to introduce a subtotal with the after range function, but i've a formula in a column, which is expansioned, this formula reffers to members in the rows, the problem is when the after range row is introduced the formula doesn't take this row into account so the reference is bad.
I explain myself:
                          a                        b                                   c
1                    10000                 clientA                                evget(a1,b1....)
2                      20000               ClientA                             evget(a2,b2....)
3                     10000                  clientB                            evget(a3,b3,....)
But if i insert the after range
                          a                            b                                         c
1                 10000                       clientA                      evget(a1,b1.....)
2                20000                        clientA                        evget(a2,b2...)
3EVAFTER                                                                      =evsum
4              10000                           clientB                       evget(a3,b3....)
If you can see in the row 4 the formula lost the correct reference.
Any suggestion?
I'm thinking in put the input schedule into stactic but is not a good solution, i can't insert blank rows because in the expansion i'm saying the bas members of a parent.
Thanx in advance

Hi Jose,
If you have an expansion in the rows and columns, then just write the formula as evget($A1,$B1....) in the first row.
Please note that I have used $ symbol in front of the column number to make them static. The row number has been kept dynamic. Now, if you run an expand, then the formula will be copied to the other cells, appropriately.
Hope this helps.

Help reqd on no ranges issue for SD

Hi experts,
After i have loaded my customer master datas(xd01) thru lsmw,im facing a problem in the current number ranges issue...i've uploaded of 1000 records of no range started from 10000 to 11000...but in XDN1(tcode)...it shows the current number range is 11004....(i.e., if i create a new record.it starts from 11004..)
why it has been arised and how??????...how will it be resolved????
from my side....once i cancelled the recording in the middle after its loaded of 4 records. then after i ran it successfully for the balance records by the sequence way....is this the reason or something else...
waiting for ur solution/expert comments
thanks and regards
sankar

Dear Sankarbabu,
IF there's no setting for Date Check in OS54 - Engineering Change Management
Control Data,then you can create a change number with past dates,and also to
use the same one for changing BOM.
Tell me one thing you are saying you want to use ECM.Was the earlier one
created without BOM was created without an ECN?
See already if you have created your BOM with an ECN,then remove the date
check setting which I have mentioned in OS54.
Now goto T code CC02 ,enter the Change number and give the valid from date as
01.10.2007.
After that check in CS03 whether this date(01.10.2007)is getting reflected or not.
I'm sure this will solve your problem.
Regards
Mangal

E4200 range issues

Hi,
I can lots of posts here on the same subject of E4200 range issues but no fix.
I have purchased a E4200 as a replacement to my eight year old WRT54G that went pop last week. Since installing I have a noticeable degradation in range in comparison to the old unit. I have tried everything I have read here, upgraded firmware, moved the unit to the middle of the house, and frankly my opinion on the unit so far is that it is no good to me if it can't do the basics that I require ie reach my kitchen or bathroom - a matter of <4m away. Any ideas, suggestions would be appreciated before I send it back?
Failing this any tips on a good router to replace this unit with, Linksys or non-Linksys?
Mark Ferris

Ferris, your problem may simply stem from being on the same channel as your neighbors. I'm pasting a link to a program called "IInsider". From this from your laptop (and it's safe, so hit yes for the UAC prompt if you're running Windows) and it will list all the wireless networks it detects, what channels they are using, and other information (which is unnecessary for purposes of this post). It will also, of course, list your own network. The graph in the lower portion of the screen will also indicate the strength of the detected networks. If it's really congested, choose a channel away from the strongest networks.
To change the channel on your E4200, go to the web interface, which is probably 192.168.1.1, click the "Wireless" tab. The options you want are under "Basic Wireless Settings", which should be the page that appears after clicking the "Wireless" tab mentioned above.
Don't choose 1 channel away; if possible, choose at least two channels away. If you're lucky, perhaps ALL your neighbors are using their default channels, in which case, choose a channel as far away from them as possible.
In case 192.168.1.1 is not the address of your router, in Windows, hit the Windows orb in the lower left-hand corner in Windows, which used to be called the "Start" button (and is still referred to as such). Type "cmd" (without the quotes) <ENTER> to get a command prompt. Type "ipconfig" (without the quotes) <ENTER>. The top section, called "Ehternet Adapter Local Area Connection" has a listing called "Default Gateway Adapter" and an ip address for that listing. THAT is the number to get to the web interface of your router.
Hope this helps!
Keith Schmidt

I have number range issue for fi posting.

hi gurus,
i have number range issue for fi posting (fb01,fb50).
problem in updating table glpca due to duplication of record.
INSERT GLPCA FROM TABLE T_GLPCA .
With Regards,
Shakthi Raj N.

error msg after generating document no and it is not getting updated in data base
error msg
"Express document "Update was terminated" received from author "ecciabap""
Client.......   750
User.....   ECCIABAP
Transaction..   FB01
Update key...   C83B07DE4DADF13CB4950017A4AB8015
Generated....   02.03.2009, 20:37:23
Completed....   02.03.2009, 20:37:23
Error Info...   00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC

No. range issue : at the time of production order settlement

Hi expert,
My user is unable to settle production order due no no range issue:
Short text of error message:
Document number 9000 20001 2008 was already assigned
Technical information about the message:
Diagnosis
     Document number 20001 in company code 9000 and fiscal year
     already been assigned.
System response
     Termination of processing.
Procedure
     Check document number range 02 in company code 9000 and fi
     2008 and correct the number range status if necessary.
Message classe...... "F5"
Number.............. 152
Variable 1.......... 9000
Variable 2.......... 20001
Variable 3.......... 2008
Variable 4.......... 02
Variable 3.......... 2008
Variable 4.......... 02
Pl advise.
Regards,
Samar

Hi experts,
Thaks for the reply.
Pl advise what is the configuration/T code to be maintained for no range
Regards,
Samar

Purchase order message Re-determination after goods issue is posted

We have a requirement to trigger special function message type (which creates a flat file) in a purchase order when goods issue for all items are posted. We have created a requirement routine for message type to check if goods issue is posted for all line items. Goods issue is posted using BAPI which uses transaction MIGO. When goods issue is posted, we want output to be triggered in purchase order. Requirement is working fine but is there any way to trigger output automatically without going to PO?
After goods issue is posted, if we go into purchase order using ME22N then we see output proposed or if we make any changes in PO then output is proposed. This will not happen in real life though.
Any suggestion will be highly appreciated. Thanks.
Sanjay

Hello,
You can create a new output message record in NAST using RV_MESSAGE_UPDATE:
CALL FUNCTION 'RV_MESSAGE_UPDATE'
      EXPORTING
        msg_kappl = 'EF'
        msg_objky = w_objky
      TABLES
        msg_xnast = itab_nast
        msg_ynast = itab_nast_old
      EXCEPTIONS
        no_update = 1
        OTHERS    = 2.
Once the record is created, you may submit the program RSNAST00 to output the message.
Thanks,
Venu

How to prevent changes qty. reservation after goods issue

Dear Expert,
Is there a way to prevent user change their reservation qty. after goods issue?
Example :
Reservation No 32XXXXX item 01 requirement.qty = 5 PC
Goods issue = 5 PC
After GI, user change qty of reservation to = 3 PC
and Save it
Best regards,
Dedy W

Hi,
You can delete respective Reservation Item with MB22 t-code.
With this deletion indicator, you can manually earmark an item for subsequent deletion (if, for example, you do not expect any further movements in respect of this item or prevent any changes in the reservation). The actual deletion process is then performed by a reorganization program (MBVR).
Regards,
Girang

IPad 2 WiFi Range Issues (but not issues with connectivity when in range)

Okay. I hate to start a new thread when there are bunches of threads on the iPad 2 having WiFi problems (particularly with 5Ghz networks and also related to 4.3). Nonetheless, I'm not seeing anyone talking about range in these forums.
Issue: iPad 2 WiFi range is not as far as iPad 1 (with no cover on either).
Alternative Explanation: iPad 2 has difficulty connecting to Airport Express or Time Capsule extended networks.
Devices: iPad 2 3g, iPad 1 3g (iOS 4.3), iPhone 3gs (iOS 4.3), iPhone (iOS 3.2x), iMac, MacBook Pros, etc.
Network Router: Simultaneous Dual-Band Airport Extreme (latest version) set up with 2.4, 5 ghz and Guest Networks (each with their own name).
Network Extender: Airport Express (latest version) extending the 2.4 ghz network
Network Extender 2: Time Capsule (original, single band) extending the 2.4 ghz network
Longer Description: iPad 2 connected without an issue to the 5 ghz network and the 2.4 ghz network when it was in the same room as the Aiport Extreme. Didn't have any issues maintaining that connection.
However, the iPad 2 doesn't work in any of the farther rooms and can't see the network. iPad 1 and iPhones have no issues (and typically show 1 or two bars). I believe they typically are connecting through the Airport Express (but it could be the Time Capsule).
Given that the iPad 2 isn't even seeing the networks, I'm guessing it's a range issue, but hoping it's not.
Anyone else seeing this? Any fixes?

While it is possible that an Apple moderator (Apple host) could pass some information to an Apple development/support group, in practice this doesn't really seem to happen (at least often). I believe that the moderators are kept quite busy just administering the forums and keeping them under control (no spam, ads, abuse, etc.). I've never seen a post by an Apple host here or seen a technical correction to a post (and there is certainly a lot of incorrect information posted here).
Unfortunately, a lot of new posters here seem to think that they are talking directly to Apple and post bug reports, feature suggestions, complaints, etc. These would be much better submitted via the Apple feedback vehicle at http://www.apple.com/feedback. These are not anonymous, are directed to the appropriate product and provide an email contact for Apple to get back to the submittor if more detail is required.

HT201210 The iPod "iPod" could not be restored. An unknown error occurred (1).This is my Ipod 32 GB, which is out of warranty and is 1G-A1213 and had gone kaput, after having issues with iTunes Software as it was not able to run Music on my IPod when conn

The iPod "iPod" could not be restored. An unknown error occurred (1).This is my Ipod 32 GB, which is out of warranty and is 1G-A1213 and had gone kaput, after having issues with iTunes Software as it was not able to run Music on my IPod when connected.
I have wasted my precious 2 days and nights and am lost all my hope...APPEAL TO ALL GEEKS TO RESOLVE MY ISSUE ON HUMANITARIAN GROUNDS ATLEAST WITH SOME VALID TIME OF YOURS.
All mails can be sent to [email protected]
Restore of Ipod back up is present...but is not getting restored due to some iTunes issue with playing my music files.It says restoring and extracts but failes in 1 min with the said error.

Other users and reported error 1 but I have not seen a solution.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

AFTER RANGE for multiple selection

Dear Experts,
When defining two colkey ranges =EVRNG(A8:B9,C8:D9)
Can I restrict my AFTER RANGE value only to the sencond range (C8:D9)
I mean, make that the columns created by the EVAFTER only applys after the whole colkey range
display the column corresponding to the first range, the the column corresponding to the second range and
then the column generated by the EVAFTER.
Someone could help me limiting this After Range values to second col key range?
Thank you veeeery much.

Thank you very much Madis,
I will try to build two EVDREs as per your suggestion, but my concern is.
Expansions between two EVDREs are compatible I mean, if I require following structure:
col1 col2 col3 (difference) col4 col5 col6 (difference)
ACC 1
ACC 1
Difference between column 1 & 2
ACC 2
ACC 2
Difference between column 3 & 4
2011.JUN
2011.OCT
Difference between column 1 & 2
2011.JUN
2011.OCT
Difference between column 3 & 4
V100
V200
Difference between column 1 & 2
V100
V200
Difference between column 3 & 4
I could filter time and version for first column in the first EVDRE and TIME and VERSION for secon column in the second EVDRE introducing the AFTER RANGE in the second EVDRE obtaining the desired result for the first section, for the first required account.
But what would it happen with second section, with ACCOUNT 2...I am afraid the first EVDRE will retrieve all accounts for TIME 1 and VERSION 1...and the at the end the second EVDRE will retrieve all accounts for TIME 2 and VERSION 2 , with out being able to compare values from selection 1 (TIME 1 and VERSION 1) versus selection 2 (TIME 2 and VERSION 2).
Thank you very much for your help.
Looking forward to hearing from you.
Best Regards.

After Range and Before Range

Hi Experts,
I encounter a problem with my templates that use After RANGE or BEFORE RANGE.
In Planning Application, there is no problem downloading the file that uses AFTER RANGE and BEFORE RANGE but in CONSOLIDATION Application I was unable to download or open the file with AFTER RANGE and BEFORE Range.
When I tried to open it, the Excel Program Hangs or Not Responding, then I must End Process to use the Microsoft Excel again.
Any suggestions?
thanks

Why don't you just put contents of ds_remote_schema.ldif from the IS6.0 install packages to your schema file, any ##name you want and tell installer to use preconfigured directory?! Up to IS6.0ea2 schema was a separate file.

I am not getting clear alert from OEM 11g Grid, even after the issue solved

I am not getting clear email alert from OEM 11g, even after the issue fixed.
For eg: I got critical alert when I have shutdown the DB.But I didn't get clear alert even I have started my DB and is up running.
I am getting only critical and warning alerts but not clear alerts from 11g Grid control.
Please help me in troubleshooting the issue....
Thanks in advance.............
vgcrl

Bullitt wrote:
there email address is [email protected]
Thank you... I will give that a go...
Martin

Material document number's range issue

Dear Friends,
We are facing Material document number's range issue i.e. For year 2010, 5000202085 number does not exist but higher number 5000202691, 5000203284 exists in system.
why the number 5000202085 is missing?
I checked in the system for relevant setting at tcode OMBT with year 9999 are okay.
Can you pls help me in getting it resolved?
Rgrds,
Pradeep Jain

I had the same question so I searched, that should always be the first step before posting a question.
No points to me please as this answer is not from me!
Search results show:
Answer from: Mauro Bianchi (SAP moderator)
This issue with the internal number assignment occurs due to bufferingin the application server. Buffering increases the performance of theserver and documents don't loose their properties. Nevertheless, it may cause gaps in the internal number assignment and sometimes the numbers may not be chronologically assigned. As I stated before, this won't cause inconsistencies in the system and is usually not an inconvenient, unless you require sequential number assignment in your documents due
to legal reasons. In this case, you'll have to disable buffering in the application server.
in order to disable buffering Just access transaction SNRO and enter the Object type MATBELEGhttp:// Number Range for Material and Phys. Inventory Document In change mode, in the menu bar, please, follow the path:
Edit -> Set-up buffering -> No buffering
Check note 62077 which describes this issue in detail

Maintenance Order - disallowing deleting reservation after material issue

Dear ALL,
How to resrict deletion of reservation in maintenance order after material issue done partially / completely.
Currently system is allowing to delete the reservation in maintenance order.
Please guide.
Regards,
Prashant Salvi

Hi,
In Tcode O04C for Version 00000000 , Application Area CN , Msg No : 750 , mention as Error message ..
If the above does not work then use user exit CNEX0039 : Check Whether Component can be Deleted
regrds
pushpa

After Range Issue

Similar Messages

Maybe you are looking for