After reboot PC sets speakers to 2
I've setup my 5. speakers and everything works great! After reboot, it's back to 2. and I have to change the settings manually. Why is it not saving my setup?
Joachim_Joe wrote:
I turned off sync, rebooted and it stayed on 5., both in the control panel and in the SB Li've Speaker setting. Great. Weird, guess the sync function does not sync
Anyone else have this problem?
I think this is quite old problem for CT software (I had this w/ SB Li've! Value).
But, if it still gives you grey hair and no other resolution can be found, then, you can autorun the script found from
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=69900
Set script to work the way it sets speaker mode to 5. and add a link to the script into startup folder.
jutapaMessage Edited by jutapa on 08-08-2006 02:33 PM
Similar Messages
-
It happened when I was browsing the RMS Titanic website (this site has some animation, so i guess the problem originates from the plugins that allow this animation). Now Firefox is awfully slow.
It happened when I was browsing the RMS Titanic website (this site has some animation, so i guess the problem originates from the plugins that allow this animation). Now Firefox is awfully slow.
-
SG200-08 VLAN-trunk setting ignored after reboot
Hi all,
The ports on my SG200-08 are configured as follows:
Port 1; VLAN 1+4; trunk
Port 2; VLAN 4; access
Port3-8; VLAN 1; access
The config for Port 1 looks as follows: "switchport trunk allowed vlan add 1,4". The problem I want to point out here arises right after rebooting the switch; in the running config, the aforementioned line is now present as "switchport trunk allowed vlan add 4", i.e., VLAN 1 is missing in the trunk. The problem is reproducible every time I reboot the switch. At this moment, I assume it to be a bug in the firmware. This is a problem for me, since the switch's management VLAN is 1 and it gets its IP address (DHCP) over VLAN 1 as well.
I have attached my startup config to this thread, as well as the running config exported right after reboot. In both of them, I've sanitized the rows on user accounts.
Does anyone recognize this problem? Any suggestions on how to fix it?Hi chrebert,
Thanks for your answer. You're right in concluding the VLAN 1 is my default VLAN. The problem is that the switch should contact my DHCP server over VLAN 1 and since the traffic on port 1 is not tagged, the traffic DHCP request will never reach my DHCP server. As a consequence, the switch always ends up with its factory default IP address (192.168.1.254) instead of the IP address assigned by the DHCP server. And yes, that's a problem
So to summarize, when I configure tagged access for VLAN 1 on port 1 and write this to the startup config, it is indeed present in the startup config afterwards. However, the switch ignores this upon reboot, causing VLAN 1 on port 1 to feature untagged access.
By the way, I completely set up the switch from scratch after restoring the config to factory defaults. It would be great if you could try to reproduce the issue and hopefully come with a fix. In case you need more information, please don't hesitate to contact me. -
Unable to remove login items (Revert after reboot) iOX10.5 iMac
I am having issues and permanent encounter in having my removed login items reappearing after reboot. I have very MANY of the same programs in 'open at Login accounts' eg: Messenger,Safari,Skype,Evernote,Dropbox,antivirus, but they are listed dozens of times. in this 'open at login' area.
Here's the steps I have taken:
1) Open Applications, Account Preferences, cluck my administrator acc, select program to delete, click on - and wait.
2) Remove some login items (with or without unlocking the lock, doesn't seem make a difference, tried both)
3) Login items are now fewer
4) Reboot
5) voila, the removed login items are still loaded and displayed in login item tab.
How does one solve this? Tried to google, but....Strange,but try these 2...
AppDelete...
http://download.cnet.com/AppDelete/3000-2096_4-10614485.html
AppZapper...
http://www.appzapper.com/ -
Tap to click setting in system preferences not persisting after reboot!
Hi,
This is the 2nd time this has happened.. I shut down my system, and boot it up later, and when I go to tap, nothing happens. I go into to system prefs > trackpad, and see that my tap to click & dragging options are unchecked......
Why is it not remembering those settings?
-patrickI also have this behavior. It seems all trackpad preferences fail to persist after reboot and logout/login. I also disable Pinch Open & Close and Rotate settings and those also revert.
-
After rebooting time advancing to 2020 (G500)
Hi,
I recently got back my G500 from warranty service (after sending it twice, they didn't do anything with my problems at first). They changed the MB in the laptop, but strangely when I first started it the time was setted to 2020 oct.
I was so surprised I even took a picture seen below. (I never had this kind of issue before.)
I have win 7 and win 8.1 checked both of them and even if I don't let the windows synchronize time from net I have this issue after rebooting. I also have issues with the sound like if I want to use headphones the laptop don't want to detect it I tried it with at least 2 different headphones. It's working if I manually prohibit the speakers from working then it's start using the headphones.
I really don't want to send my laptop to the warranty service again since it's far away from my home and they don't seem to try to fix my laptop at all. For first try they tested it and said it's working fine but I couldn't even turn it on when I received so I had to send it back, at second try they changed the MB but it tooks long and I hope if maybe there is a way to fix these?
Everyone how tries to help thanks in advance!Ah, I didn't check I just assumed that if the had to put a brand new MB into my laptop it would be up to date.
I found this, I'm not sure if it's the newest? Any tips? Also thanks for the reply. -
Lion takes 15 seconds to log in after reboot on Macbook Pro 13" (early 2011)
I have been having sluggish performance (repeated beachballs, etc.) on my Macbook Pro 13-inch (2.7 GHz Intel Core i7, 4 GB RAM), which I bought this summer pre-installed with Lion.
I didn't migrate my old system, I just installed everything on my new machine. After about 9 years of OS X upgrades on various machines, I decided to start fresh and just installed my applications and transferred the data manually. It took some time, but I wanted it lean and clean.
Within weeks though, things were starting to slow down. This morning, it took over 15 seconds after reboot before I could even log in to my user account (I clicked on the icon for my account, and after 4-5 seconds it beachballed for 10 seconds before the field for the password "slid" into place).
I've tried checking and unchecking having Lion restore my previous session before rebooting; closing all applications before restarting; not closing applications before restarting. But consistently, right after logging in for several minutes, and then after several hours of use (and/or the next day, if I put my laptop to sleep instead of shutting it down) opening, saving documents, viewing mailboxes after opening Mail, or even viewing folder contents in the Finder can take from several to 30+ seconds.
Here is the log from my most recent boot. I have Dropbox, LogMeIn, Default Folder, and Growl (the pre-App Store version), and I have Parallels (which I very rarely use), but I don't see why any of these would slow down my machine before I even log in. Besides this, I have pretty standard fair applications. I would very much appreciate any help/advice!
06/12/11 02:57:20,000 bootlog: BOOT_TIME 1323161840 0
06/12/11 02:57:35,567 UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built Jun 13 2011 17:29:21
06/12/11 02:57:36,000 kernel: PMAP: PCID enabled
06/12/11 02:57:35,578 UserEventAgent: CertsKeychainMonitor: configuring
06/12/11 02:57:35,752 UserEventAgent: WirelessAirPortDeviceNameCopy(): no BSD interface name found for object 12551
06/12/11 02:57:35,752 UserEventAgent: CaptiveNetworkSupport:CaptiveSCCopyWiFiDevices:388 WiFi Device Name == NULL
06/12/11 02:57:36,000 kernel: Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
06/12/11 02:57:36,000 kernel: vm_page_bootstrap: 987432 free pages and 52952 wired pages
06/12/11 02:57:36,000 kernel: kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
06/12/11 02:57:36,000 kernel: zone leak detection enabled
06/12/11 02:57:36,000 kernel: standard timeslicing quantum is 10000 us
06/12/11 02:57:36,000 kernel: mig_table_max_displ = 73
06/12/11 02:57:36,000 kernel: TSC Deadline Timer supported and enabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
06/12/11 02:57:36,000 kernel: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
06/12/11 02:57:36,000 kernel: calling mpo_policy_init for TMSafetyNet
06/12/11 02:57:36,000 kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
06/12/11 02:57:36,000 kernel: calling mpo_policy_init for Sandbox
06/12/11 02:57:36,000 kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
06/12/11 02:57:36,000 kernel: calling mpo_policy_init for Quarantine
06/12/11 02:57:36,000 kernel: Security policy loaded: Quarantine policy (Quarantine)
06/12/11 02:57:36,000 kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
06/12/11 02:57:36,000 kernel: The Regents of the University of California. All rights reserved.
06/12/11 02:57:36,000 kernel: MAC Framework successfully initialized
06/12/11 02:57:36,000 kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
06/12/11 02:57:36,000 kernel: IOAPIC: Version 0x20 Vectors 64:87
06/12/11 02:57:36,000 kernel: ACPI: System State [S0 S3 S4 S5] (S3)
06/12/11 02:57:36,000 kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
06/12/11 02:57:36,000 kernel: [ PCI configuration begin ]
06/12/11 02:57:36,000 kernel: AppleIntelCPUPowerManagement: Turbo Ratios 0057
06/12/11 02:57:36,000 kernel: AppleIntelCPUPowerManagement: (built 21:08:10 Aug 9 2011) initialization complete
06/12/11 02:57:36,000 kernel: console relocated to 0xf10000000
06/12/11 02:57:36,000 kernel: PCI configuration changed (bridge=16 device=4 cardbus=0)
06/12/11 02:57:36,000 kernel: [ PCI configuration end, bridges 12 devices 16 ]
06/12/11 02:57:36,000 kernel: mbinit: done [64 MB total pool size, (42/21) split]
06/12/11 02:57:36,000 kernel: Pthread support ABORTS when sync kernel primitives misused
06/12/11 02:57:36,000 kernel: com.apple.AppleFSCompressionTypeZlib kmod start
06/12/11 02:57:36,000 kernel: com.apple.AppleFSCompressionTypeDataless kmod start
06/12/11 02:57:36,000 kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
06/12/11 02:57:36,000 kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
06/12/11 02:57:36,000 kernel: AppleIntelCPUPowerManagementClient: ready
06/12/11 02:57:36,000 kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID a4b197fffe1f2470; max speed s800.
06/12/11 02:57:36,000 kernel: BTCOEXIST off
06/12/11 02:57:36,000 kernel: wl0: Broadcom BCM4331 802.11 Wireless Controller
06/12/11 02:57:36,000 kernel: 5.100.98.75
06/12/11 02:57:36,000 kernel: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
06/12/11 02:57:36,000 kernel: rooting via boot-uuid from /chosen: 96C21F61-797D-3976-A440-77523146C652
06/12/11 02:57:36,000 kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
06/12/11 02:57:36,000 kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartitionScheme/Customer@2
06/12/11 02:57:36,000 kernel: BSD root: disk0s2, major 14, minor 2
06/12/11 02:57:36,000 kernel: [IOBluetoothHCIController::setConfigState] calling registerService
06/12/11 02:57:36,000 kernel: Kernel is LP64
06/12/11 02:57:22,205 com.apple.launchd: *** launchd[1] has started up. ***
06/12/11 02:57:35,250 com.apple.launchd: (com.parallels.desktop.launchdaemon) Unknown key for boolean: HopefullyExitsFirst
06/12/11 02:57:35,250 com.apple.launchd: (com.stclairsoft.DefaultFolderXAgent) Unknown key for string: Version
06/12/11 02:57:35,250 com.apple.launchd: (com.stclairsoft.DefaultFolderXAgent) Unknown key: Version
06/12/11 02:57:38,000 kernel: BCM5701Enet: Ethernet address 3c:07:54:11:19:ea
06/12/11 02:57:38,000 kernel: AirPort_Brcm4331: Ethernet address 28:cf:da:d7:d5:9c
06/12/11 02:57:38,000 kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
06/12/11 02:57:38,000 kernel: IO80211Interface::efiNVRAMPublished():
06/12/11 02:57:39,000 kernel: Previous Shutdown Cause: 5
06/12/11 02:57:39,000 kernel: DSMOS has arrived
06/12/11 02:57:39,082 airportd: _processDLILEvent: en1 attached (down)
06/12/11 02:57:40,000 kernel: Created virtif 0xffffff800ba49c00 p2p0
06/12/11 02:57:40,000 kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
06/12/11 02:57:40,124 UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
06/12/11 02:57:40,124 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06/12/11 02:57:40,124 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06/12/11 02:57:40,125 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06/12/11 02:57:40,125 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06/12/11 02:57:40,125 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06/12/11 02:57:40,125 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
06/12/11 02:57:40,132 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
06/12/11 02:57:40,516 com.apple.SecurityServer: Session 100000 created
06/12/11 02:57:41,763 configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
06/12/11 02:57:41,763 configd: DHCP en1: INIT-REBOOT transmit failed
06/12/11 02:57:41,778 configd: setting hostname to "MacBook-Pro-dAutrefois.local"
06/12/11 02:57:41,782 configd: network configuration changed.
06/12/11 02:57:41,934 mDNSResponder: mDNSResponder mDNSResponder-320.10 (Aug 2 2011 19:56:51) starting OSXVers 11
06/12/11 02:57:44,952 com.apple.SecurityServer: Entering service
06/12/11 02:57:45,892 systemkeychain: done file: /var/run/systemkeychaincheck.done
06/12/11 02:57:45,905 configd: network configuration changed.
06/12/11 02:57:45,907 configd: network configuration changed.
06/12/11 02:57:45,908 mDNSResponder: D2D_IPC: Loaded
06/12/11 02:57:45,908 mDNSResponder: D2DInitialize succeeded
06/12/11 02:57:45,910 mDNSResponder: Adding registration domain autrefois.members.mac.com.
06/12/11 02:57:46,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:46,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:46,425 com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
06/12/11 02:57:46,425 com.apple.pfctl: No ALTQ support in kernel
06/12/11 02:57:46,425 com.apple.pfctl: ALTQ related functions disabled
06/12/11 02:57:46,548 Parallels: Loading kernel extension prl_hypervisor.kext
06/12/11 02:57:47,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:47,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:47,000 kernel: AppleBCM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?
06/12/11 02:57:48,000 kernel: en1: 802.11d country code set to 'US'.
06/12/11 02:57:48,000 kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
06/12/11 02:57:48,000 kernel: MacAuthEvent en1 Auth result for: 00:25:bc:8d:98:b5 MAC AUTH succeeded
06/12/11 02:57:48,000 kernel: wlEvent: en1 en1 Link UP
06/12/11 02:57:48,000 kernel: AirPort: Link Up on en1
06/12/11 02:57:48,000 kernel: en1: BSSID changed to 00:25:bc:8d:98:b5
06/12/11 02:57:48,423 Parallels: Loading kernel extension prl_hid_hook.kext
06/12/11 02:57:48,946 awacsd: Starting awacsd connectivity-47 (Jul 7 2011 20:52:38)
06/12/11 02:57:48,956 awacsd: Connecting AWACS client: autrefois
06/12/11 02:57:49,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:49,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:49,000 kernel: AirPort: RSN handshake complete on en1
06/12/11 02:57:49,000 kernel: /drv/ HypApic.c:230 Host APIC phy 0xFEE00000 lin 0xffffff807edde000 ver 0x15
06/12/11 02:57:49,000 kernel: /drv/ HypVtd.c:3718 [vtdInit]
06/12/11 02:57:49,000 kernel: /drv/ HypVtd.c:3734 [vtdInit] VTD initialization disabled
06/12/11 02:57:49,000 kernel: /drv/ HypLowCache.c:173 Low cache initialized (6848 kB for 8 VMs on 4096 MB)
06/12/11 02:57:49,000 kernel: /drv/ HypSMBios.c:54 Failed to find SMBios entry point
06/12/11 02:57:49,000 kernel: /drv/ HypModule.c:174 Parallels IPI irq = 0 ipi = 0(0x0)
06/12/11 02:57:49,000 kernel: /drv/ HypModule.c:181 Parallels Hypervisor 6.0.12094.676494 loaded.
06/12/11 02:57:49,241 com.apple.usbmuxd: usbmuxd-263 on Aug 23 2011 at 00:44:06, running 64 bit
06/12/11 02:57:49,422 UserEventAgent: ServermgrdRegistration cannot load config data
06/12/11 02:57:49,462 rpcsvchost: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
06/12/11 02:57:50,516 Parallels: Loading kernel extension prl_usb_connect.kext
06/12/11 02:57:51,000 kernel: /prl_hid/ Parallels HID Helper started.
06/12/11 02:57:51,314 xpchelper: for uid: 222 -- timeout while waiting on FSEvents flush; clearing cache.
06/12/11 02:57:53,488 xpchelper: for uid: 0 -- timeout while waiting on FSEvents flush; clearing cache.
06/12/11 02:57:53,662 loginwindow: Login Window Application Started
06/12/11 02:57:54,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:54,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:57:54,460 Parallels: Trying to load kernel extensions, exit status: 0
06/12/11 02:57:57,520 mds: (Normal) FMW: FMW 0 0
06/12/11 02:57:58,384 Parallels: Starting Parallels networking...
06/12/11 02:57:58,484 configd: network configuration changed.
06/12/11 02:57:58,500 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
06/12/11 02:57:58,500 UserEventAgent: CaptiveNetworkSupport:CNSPreferencesBuildSSIDLookup:278 ssidLookup:
06/12/11 02:57:58,500 UserEventAgent: <empty>
06/12/11 02:58:11,435 mds: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
06/12/11 02:58:11,436 mds: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
06/12/11 02:58:11,496 mds: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
06/12/11 02:58:11,572 com.apple.launchd: (com.apple.netbiosd[99]) Exited abnormally: Hangup: 1
06/12/11 02:58:12,198 Parallels: Loading kernel extension prl_netbridge.kext
06/12/11 02:58:12,644 airportd: _doAutoJoin: Already associated to “Merrol's Network”. Bailing on auto-join.
06/12/11 02:58:12,652 airportd: _doAutoJoin: Already associated to “Merrol's Network”. Bailing on auto-join.
06/12/11 02:58:16,412 UserEventAgent: servermgr_certs[11] -[CertsRequestHandler(HelperAdditions) identitiesFromKeychain:]: SecItemCopyMatching (err = -25300)
06/12/11 02:58:16,414 com.apple.UserEventAgent-System: SecItemCopyMatching: L’élément spécifié est introuvable dans le trousseau.
06/12/11 02:58:16,417 UserEventAgent: servermgr_certs[11] -[CertsRequestHandler(HelperAdditions) identitiesFromKeychain:]: SecItemCopyMatching (err = -25300)
06/12/11 02:58:16,417 com.apple.UserEventAgent-System: SecItemCopyMatching: L’élément spécifié est introuvable dans le trousseau.
06/12/11 02:58:16,417 UserEventAgent: CertsKeychainMonitor: ready to process keychain & timer events
06/12/11 02:58:17,960 Parallels: Loading kernel extension prl_vnic.kext
06/12/11 02:58:18,000 kernel: com.parallels.kext.prlnet 6.0.12094.676494 has started.
06/12/11 02:58:19,946 ntpd: proto: precision = 1.000 usec
06/12/11 02:58:21,000 kernel: macx_swapon SUCCESS
06/12/11 02:58:22,652 UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on Merrol's Network because it is protected and not on the exception list
06/12/11 02:58:22,655 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
06/12/11 02:58:22,000 kernel: com.parallels.kext.vnic 6.0.12094.676494 has started.
06/12/11 02:58:22,656 configd: network configuration changed.
06/12/11 02:58:23,000 kernel: utun_ctl_connect: creating interface utun0
06/12/11 02:58:24,000 kernel: nspace-handler-set-snapshot-time: 1323161906
06/12/11 02:58:24,757 awacsd: RouteDiscovery: sendmsg error (6): Device not configured
06/12/11 02:58:25,000 kernel: utun_ctl_connect: creating interface utun0
06/12/11 02:58:25,000 kernel: utun0: attached with 0 suspended link-layer multicast membership(s)
06/12/11 02:58:26,838 loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
06/12/11 02:58:27,206 com.apple.mtmfs: /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T//mtmfsMap64
06/12/11 02:58:27,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:58:30,892 com.apple.launchd: (com.logmein.logmeinguiagent) Unknown key for boolean: UseLMILaunchAgentFixer
06/12/11 02:58:30,895 com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
06/12/11 02:58:32,589 airportd: _doAutoJoin: Already associated to “Merrol's Network”. Bailing on auto-join.
06/12/11 02:58:32,791 com.apple.SecurityServer: Session 100005 created
06/12/11 02:58:32,792 loginwindow: Login Window Started Security Agent
06/12/11 02:58:33,175 SecurityAgent: Echo enabled
06/12/11 02:58:33,175 SecurityAgent: Echo enabled
06/12/11 02:58:37,449 SecurityAgent: User info context values set for autrefois
06/12/11 02:58:37,449 SecurityAgent: User info context values set for autrefois
06/12/11 02:58:38,379 authorizationhost: Failed to authenticate user <autrefois> (error: 9).
06/12/11 02:58:42,604 vpnagent: Cisco AnyConnect VPN Client Agent started, version 2.5.3041
06/12/11 02:58:42,680 vpnagent: Function: initMsgCatalog File: i18n/MsgCatalog.cpp Line: 179 Current locale: en-us
06/12/11 02:58:42,681 vpnagent: Function: loadProfiles File: ProfileMgr.cpp Line: 112 No profile is available.
06/12/11 02:58:42,682 vpnagent: Function: fileExists File: Utility/sysutils.cpp Line: 500 Invoked Function: _tstat Return Code: 2 (0x00000002) Description: unknown File: /opt/cisco/vpn/AnyConnectLocalPolicy.xml Error: No such file or directory
06/12/11 02:58:44,239 vpnagent: Current Preference Settings: CertificateStoreOverride: false CertificateStore: All ShowPreConnectMessage: false AutoConnectOnStart: false MinimizeOnConnect: true LocalLanAccess: false AutoReconnect: true AutoReconnectBehavior: DisconnectOnSuspend AutoUpdate: true ProxySettings: Native AllowLocalProxyConnections: true PPPExclusion: Disable PPPExclusionServerIP: AutomaticVPNPolicy: false TrustedNetworkPolicy: Disconnect UntrustedNetworkPolicy: Connect TrustedDNSDomains: TrustedDNSServers: AlwaysOn: false ConnectFailurePolicy: Closed AllowCaptivePortalRemediation: false CaptivePortalRemediationTimeout: 5 ApplyLastVPNLocalResourceRules: false AllowVPNDisconnect: true EnableScripting: false TerminateScriptOnNextEvent: false EnableAutomaticServerSelection: false AutoServerSelectionImprovement: 20 AutoServerSelectionSuspendTime: 4 AuthenticationTimeout: 12
06/12/11 02:58:44,617 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:44,617 vpnagent: Function: logInterfaces File: RouteMgr.cpp Line: 2076 Invoked Function: logInterfaces Return Code: 0 (0x00000000) Description: IP Address Interface List:
06/12/11 02:58:44,617 vpnagent: Function: readConfigParamFromFile File: vpnconfig.cpp Line: 3171 The specified configuration file for MUS service does not exist
06/12/11 02:58:44,617 vpnagent: Default route not cleared, no store
06/12/11 02:58:44,725 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:44,725 vpnagent: Function: applyHostConfigForNoVpn File: MainThread.cpp Line: 7570 No network interface is available, will not apply the noVPN host configuration.
06/12/11 02:58:44,725 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:44,793 com.logmein.logmeinguiagent: 2011-12-06 02:58:44.792 - Info - LMIGUIAgent - Main - starting...
06/12/11 02:58:44,793 com.logmein.logmeinguiagent: 2011-12-06 02:58:44.792 - Info - LMIGUIAgent - Main - started:159 uid:0 (parent:1 launchd)
06/12/11 02:58:44,793 com.logmein.logmeinguiagent: 2011-12-06 02:58:44.792 - Info - LMIGUIAgent - Main - waiting for window server connection
06/12/11 02:58:45,244 com.logmein.logmeinguiagent: 2011-12-06 02:58:45.244 - Info - LMIGUIAgent - Main - waiting for window server session
06/12/11 02:58:45,497 com.logmein.logmeinguiagent: 2011-12-06 02:58:45.496 - Info - LMIGUIAgent - Main - connecting to session manager
06/12/11 02:58:45,812 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,813 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,813 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,000 kernel: com_parallels_kext_prl_vnic: created vnic0
06/12/11 02:58:45,000 kernel: com_parallels_kext_prl_vnic: created vnic1
06/12/11 02:58:45,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:58:45,814 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,815 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,815 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:45,891 Parallels: Parallels networking sucessfully started
06/12/11 02:58:45,893 Parallels: Restarting CiscoVPN
06/12/11 02:58:46,093 SystemStarter: Unknown service: CiscoVPN
06/12/11 02:58:46,096 Parallels: Starting Parallels Dispatcher Service
06/12/11 02:58:46,099 Parallels: Parallels Dispatcher Server sucessfully started
06/12/11 02:58:46,944 ntpd: bind(32) AF_INET6 fe80::21c:42ff:fe00:8%9#123 flags 0x11 failed: Can't assign requested address
06/12/11 02:58:46,944 ntpd: unable to create socket on vnic0 (11) for fe80::21c:42ff:fe00:8#123
06/12/11 02:58:46,944 ntpd: bind(32) AF_INET6 fec0:0:0:fea9::1#123 flags 0x11 failed: Can't assign requested address
06/12/11 02:58:46,944 ntpd: unable to create socket on vnic0 (12) for fec0:0:0:fea9::1#123
06/12/11 02:58:46,944 ntpd: bind(33) AF_INET6 fe80::21c:42ff:fe00:9%10#123 flags 0x11 failed: Can't assign requested address
06/12/11 02:58:46,945 ntpd: unable to create socket on vnic1 (14) for fe80::21c:42ff:fe00:9#123
06/12/11 02:58:46,945 ntpd: bind(33) AF_INET6 fec0:0:0:feaa::1#123 flags 0x11 failed: Can't assign requested address
06/12/11 02:58:46,945 ntpd: unable to create socket on vnic1 (15) for fec0:0:0:feaa::1#123
06/12/11 02:58:47,155 prl_naptd: Starting Parallels Network Daemon
06/12/11 02:58:48,686 prl_naptd: vnic0: DHCP/NAT for 10.211.55.1-10.211.55.254 netmask 255.255.255.0
06/12/11 02:58:48,687 prl_naptd: vnic1: DHCP for 10.37.129.1-10.37.129.254 netmask 255.255.255.0
06/12/11 02:58:49,000 kernel: vnic0: promiscuous mode enable failed
06/12/11 02:58:49,000 kernel: vnic1: promiscuous mode enable failed
06/12/11 02:58:49,726 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:49,726 vpnagent: Function: applyHostConfigForNoVpn File: MainThread.cpp Line: 7570 No network interface is available, will not apply the noVPN host configuration.
06/12/11 02:58:49,726 vpnagent: Function: if_get_interfaces File: Utility/if_unix.cpp Line: 185 Invoked Function: ioctl Return Code: -1 (0xFFFFFFFF) Description: unknown (SIOCGIFDSTADDR) for interface "utun0"
06/12/11 02:58:50,000 kernel: utun_ctl_connect: creating interface utun1
06/12/11 02:58:50,000 kernel: SIOCPROTODETACH_IN6: utun1 error=6
06/12/11 02:58:51,075 com.logmein.logmeinguiagent: 2011-12-06 02:58:51.075 - Debug - LMIGUIAgent - SessionManager - SessionAgentStarted
06/12/11 02:58:51,472 com.logmein.logmeinguiagent: Cannot create socket:/var/tmp/com.logmein.LMIServer/AgentSocket errno: (61) Connection refused
06/12/11 02:58:52,843 com.logmein.logmeinguiagent: 2011-12-06 02:58:52.842 - Info - LMIGUIAgent - Main - starting...
06/12/11 02:58:52,843 com.logmein.logmeinguiagent: 2011-12-06 02:58:52.843 - Info - LMIGUIAgent - Main - started:204 uid:0 (parent:1 launchd)
06/12/11 02:58:52,843 com.logmein.logmeinguiagent: 2011-12-06 02:58:52.843 - Info - LMIGUIAgent - Main - waiting for window server connection
06/12/11 02:58:52,843 com.logmein.logmeinguiagent: 2011-12-06 02:58:52.843 - Info - LMIGUIAgent - Main - waiting for window server session
06/12/11 02:58:52,844 com.logmein.logmeinguiagent: 2011-12-06 02:58:52.843 - Info - LMIGUIAgent - Main - connecting to session manager
06/12/11 02:58:53,365 com.logmein.logmeinguiagent: 2011-12-06 02:58:53.365 - Debug - LMIGUIAgent - SessionManager - SessionAgentStarted
06/12/11 02:58:53,365 com.logmein.logmeinguiagent: Cannot create socket:/var/tmp/com.logmein.LMIServer/AgentSocket errno: (61) Connection refused
06/12/11 02:58:53,367 com.apple.launchd: (com.logmein.logmeinguiagent) Throttling respawn: Will start in 10 seconds
06/12/11 02:58:56,000 kernel: /drv/ MacDevice.cpp:608 com_parallels_hypervisor_client::powerDownHandler: message e0000340
06/12/11 02:58:56,000 kernel: /drv/ HypIoctls.c:912 Ioctl VT-d status: 0
06/12/11 02:58:58,000 kernel: /drv/ MacDevice.cpp:608 com_parallels_hypervisor_client::powerDownHandler: message e0000340
06/12/11 02:58:58,000 kernel: /drv/ MacDevice.cpp:608 com_parallels_hypervisor_client::powerDownHandler: message e0000340
06/12/11 02:58:58,000 kernel: /drv/ MacDevice.cpp:608 com_parallels_hypervisor_client::powerDownHandler: message e0000340
06/12/11 02:58:59,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:59:00,000 kernel: /drv/ MacDevice.cpp:608 com_parallels_hypervisor_client::powerDownHandler: message e0000340
06/12/11 02:59:03,388 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.387 - Info - LMIGUIAgent - Main - starting...
06/12/11 02:59:03,388 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.387 - Info - LMIGUIAgent - Main - started:206 uid:0 (parent:1 launchd)
06/12/11 02:59:03,388 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.387 - Info - LMIGUIAgent - Main - waiting for window server connection
06/12/11 02:59:03,388 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.387 - Info - LMIGUIAgent - Main - waiting for window server session
06/12/11 02:59:03,388 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.388 - Info - LMIGUIAgent - Main - connecting to session manager
06/12/11 02:59:03,910 com.logmein.logmeinguiagent: 2011-12-06 02:59:03.909 - Debug - LMIGUIAgent - SessionManager - SessionAgentStarted
06/12/11 02:59:03,910 com.logmein.logmeinguiagent: Cannot create socket:/var/tmp/com.logmein.LMIServer/AgentSocket errno: (61) Connection refused
06/12/11 02:59:03,911 com.apple.launchd: (com.logmein.logmeinguiagent) Throttling respawn: Will start in 10 seconds
06/12/11 02:59:04,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:59:06,880 SecurityAgent: User info context values set for autrefois
06/12/11 02:59:06,880 SecurityAgent: User info context values set for autrefois
06/12/11 02:59:08,197 SecurityAgent: Login Window login proceeding
06/12/11 02:59:08,197 SecurityAgent: Login Window login proceeding
06/12/11 02:59:08,550 loginwindow: Login Window - Returned from Security Agent
06/12/11 02:59:08,557 loginwindow: USER_PROCESS: 68 console
06/12/11 02:59:08,588 airportd: _doAutoJoin: Already associated to “Merrol's Network”. Bailing on auto-join.
06/12/11 02:59:08,667 applepushserviced: Unable to bootstrap_lookup connection port for 'com.apple.iCalPush': unknown error code
06/12/11 02:59:08,793 com.apple.launchd.peruser.501: (com.logmein.logmeingui) Unknown key for boolean: UseLMILaunchAgentFixer
06/12/11 02:59:08,793 com.apple.launchd.peruser.501: (com.logmein.logmeinguiagent) Unknown key for boolean: UseLMILaunchAgentFixer
06/12/11 02:59:08,794 com.apple.launchd.peruser.501: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
06/12/11 02:59:08,796 com.apple.launchctl.Aqua: load: option requires an argument -- D
06/12/11 02:59:08,796 com.apple.launchctl.Aqua: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
06/12/11 02:59:09,568 UserEventAgent: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 19471
06/12/11 02:59:09,741 com.apple.launchd.peruser.501: (com.apple.launchctl.Aqua[210]) Exited with code: 1
06/12/11 02:59:12,510 com.logmein.logmeinguiagent: 2011-12-06 02:59:12.421 - Info - LMIGUIAgent - Main - starting...
06/12/11 02:59:12,510 com.logmein.logmeinguiagent: 2011-12-06 02:59:12.508 - Info - LMIGUIAgent - Main - started:243 uid:501 (parent:176 launchd)
06/12/11 02:59:12,510 com.logmein.logmeinguiagent: 2011-12-06 02:59:12.508 - Info - LMIGUIAgent - Main - waiting for window server connection
06/12/11 02:59:12,511 com.logmein.logmeinguiagent: 2011-12-06 02:59:12.510 - Info - LMIGUIAgent - Main - waiting for window server session
06/12/11 02:59:12,511 com.logmein.logmeinguiagent: 2011-12-06 02:59:12.510 - Info - LMIGUIAgent - Main - connecting to session manager
06/12/11 02:59:12,511 prl_naptd: Starting Parallels Network Daemon
06/12/11 02:59:13,488 LogMeInGUI: LogMeIn GUI started
06/12/11 02:59:14,000 com.logmein.logmeinguiagent: 2011-12-06 02:59:13.999 - Debug - LMIGUIAgent - SessionManager - SessionAgentStarted
06/12/11 02:59:17,283 sudo: root : TTY=unknown ; PWD=/ ; USER=autrefois ; COMMAND=/bin/launchctl load /Library/LaunchAgents/com.parallels.vm.prl_pcproxy.plist
06/12/11 02:59:17,000 kernel: nstat_lookup_entry failed: 2
06/12/11 02:59:17,832 [0x0-0x14014].com.elgato.eyetvhelper: EyeTV Helper version 3.5.2 build 306
06/12/11 02:59:18,596 LogMeInGUI: Config watcher thread started
06/12/11 02:59:18,650 LogMeInGUI: applicationDidFinishLaunching
06/12/11 02:59:18,664 sudo: root : TTY=unknown ; PWD=/ ; USER=autrefois ; COMMAND=/bin/launchctl start com.parallels.vm.prl_pcproxy
06/12/11 02:59:19,820 LogMeInGUI: remoteControl:INACTIVE
06/12/11 02:59:19,843 LogMeInGUI: processLine:ACCESSMASK: 18446743936270597119
06/12/11 02:59:25,431 Mail: Using V2 Layout
06/12/11 02:59:27,111 SystemUIServer: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
06/12/11 02:59:27,112 com.apple.SystemUIServer.agent: SystemUIServer: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
06/12/11 02:59:27,123 Dock: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
06/12/11 02:59:27,123 com.apple.Dock.agent: Dock: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
06/12/11 02:59:27,400 Finder: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
06/12/11 02:59:27,400 com.apple.Finder: Finder: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: Entered INJECT_pthread_entry
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: Installing event loop timer
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: proc: 0x1078e3e5b
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: upp: 0x1078e3e5b
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: InstallEventLoopTimer: 0x7fff898b10de
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: GetMainEventLoop: 0x7fff89872861
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: Loading /Library/DropboxHelperTools/Dropbox_u501/DropboxBundle.bundle/Contents/MacOS/Dr opboxBundle
06/12/11 02:59:27,907 com.apple.Finder: Dropbox: timer installed!
06/12/11 02:59:27,908 com.apple.Finder: Dropbox: dlopen returned: 0x7ff29bd821b0
06/12/11 02:59:27,908 com.apple.Finder: module initializer in main thread?: 1
06/12/11 02:59:32,294 osascript: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 02:59:32,637 osascript: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 02:59:33,219 osascript: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 02:59:48,648 Mail: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
06/12/11 02:59:48,648 [0x0-0x1e01e].com.apple.mail: Mail: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
06/12/11 02:59:58,932 LKDCHelper: Starting (uid=501)
06/12/11 03:01:58,164 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.164 - Debug - LMIGUIAgent - SessionManager - sessionTerminating
06/12/11 03:01:58,164 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.164 - Debug - LMIGUIAgent - SessionManager - DisplayServer stop
06/12/11 03:01:58,164 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.164 - Debug - LMIGUIAgent - SessionManager - DisplayServer close
06/12/11 03:01:58,164 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.164 - Debug - LMIGUIAgent - GUIAgent - DisplayServerStopped.Sent[243]
06/12/11 03:01:58,166 com.logmein.logmeinguiagent: Session - Error occured:read errno: (9) Bad file descriptor
06/12/11 03:01:58,166 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.165 - Debug - LMIGUIAgent - SessionManager - Connection closed
06/12/11 03:01:58,166 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.165 - Debug - LMIGUIAgent - SessionManager - Closing DisplayServer
06/12/11 03:01:58,166 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.165 - Debug - LMIGUIAgent - SessionManager - DisplayServer close
06/12/11 03:01:58,166 com.logmein.logmeinguiagent: 2011-12-06 03:01:58.165 - Debug - LMIGUIAgent - SessionManager - Exiting
06/12/11 03:01:59,168 com.apple.launchd.peruser.501: (com.logmein.logmeinguiagent[243]) Exited with code: 1
06/12/11 03:02:02,557 com.logmein.logmeingui: Determine OS version
06/12/11 03:02:02,557 com.logmein.logmeingui: leopard
06/12/11 03:02:02,557 com.logmein.logmeingui: Executing command:unload -S Aqua /Library/LaunchAgents/com.logmein.logmeinguiagent.plist on launchd with sessiontype::Aqua
06/12/11 03:02:02,557 com.logmein.logmeingui: In session:Aqua
06/12/11 03:02:02,557 com.logmein.logmeingui: Executing command:/bin/launchctl unload -w "/Library/LaunchDaemons/com.logmein.logmeinserver.plist" 2>&1 euid:0 uid:0
06/12/11 03:03:02,059 com.apple.launchd.peruser.501: ([0x0-0x16016].com.getdropbox.dropbox[253]) Exited: Killed: 9
06/12/11 03:03:09,151 com.apple.Finder: Dropbox: Not loading image DropboxBundle because it's already loaded.
06/12/11 03:03:10,249 osascript: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 03:03:10,536 osascript: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 03:03:29,189 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:35,292 WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
06/12/11 03:03:47,755 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CRDC200.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:47,755 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CRDC200.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:48,000 kernel: nstat_lookup_entry failed: 2
06/12/11 03:03:49,964 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:49,965 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:50,445 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409MSau02.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:50,445 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409MSau02.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:51,439 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409MSau02.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:51,439 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409MSau02.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:51,849 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CMSOf14.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:51,849 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CMSOf14.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:52,219 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CMSOf14.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:52,219 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CMSOf14.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:52,816 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409Merp2.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:52,816 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409Merp2.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:03:53,882 Microsoft AU Daemon: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409Merp2.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:03:53,882 Microsoft AU Daemon: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409Merp2.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:01,187 Microsoft AutoUpdate: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 03:04:01,826 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CRDC200.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:01,826 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CRDC200.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:06,039 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409MSau02.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:06,040 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409MSau02.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:06,907 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409MSau02.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:06,907 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409MSau02.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:07,304 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CMSOf14.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:07,304 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CMSOf14.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:07,311 Microsoft Outlook: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/Adobe Unit Types.osax" not loaded.
06/12/11 03:04:08,028 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/040CMSOf14.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:08,028 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/040CMSOf14.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:08,526 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409Merp2.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:08,527 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409Merp2.cat' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:09,055 Microsoft AutoUpdate: CFURLCreateWithString was passed this invalid URL string: '/mac/autoupdate/0409Merp2.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:09,055 Microsoft AutoUpdate: CFURLCreateWithBytes was passed these invalid URLBytes: '/mac/autoupdate/0409Merp2.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:15,917 Mail: -[POP3Connection fetchMessages:totalBytes:] failed: Error Domain=NSPOSIXErrorDomain Code=54 "Échec de la tentative d’envoi de données vers le serveur « (null) »." UserInfo=0x7f8b2951df10 {NSLocalizedDescription=Échec de la tentative d’envoi de données vers le serveur « (null) ».}
06/12/11 03:04:23,226 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:24,030 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:24,215 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:24,978 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:24,980 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:24,980 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:25,070 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:25,372 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:25,523 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/oab.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:25,540 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:26,536 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/oab.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:26,946 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:27,853 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/oab.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:28,034 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:28,802 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:29,000 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-26.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:29,000 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-26.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:29,047 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:29,167 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:29,434 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:29,558 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:29,558 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:29,914 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-25.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:29,914 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-25.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:30,684 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:30,685 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:30,878 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:30,900 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:31,098 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-24.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:04:31,098 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-24.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:31,123 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/autodiscover/autodiscover.xml' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:04:42,094 Safari: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
06/12/11 03:04:42,094 [0x0-0x24024].com.apple.Safari: Safari: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
06/12/11 03:05:00,000 kernel: nstat_lookup_entry failed: 2
06/12/11 03:05:04,207 com.apple.launchd.peruser.0: Background: Bug: launchd_core_logic.c:3059 (25247):3
06/12/11 03:05:04,207 com.apple.launchd.peruser.0: Background: job_mig_intran() was confused by PID 388 UID 0 EUID 0 Mach Port 0x1a07:
06/12/11 03:05:04,207 com.apple.launchd.peruser.0: Bug: launchd_core_logic.c:8610 (25247):3: j != NULL
06/12/11 03:05:10,381 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:10,527 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:05:10,960 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-23.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:10,960 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/OAB/41b159ae-659a-4263-aa94-2dc96ab09af2/ddba70fe-e20a-4024-9fea-3770413daf4d -binpatch-23.lzx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:05:11,237 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:11,372 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:05:13,629 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:13,630 Microsoft Outlook: CFURLCreateWithBytes was passed these invalid URLBytes: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateFromFileSystemRepresentation should be used instead.
06/12/11 03:05:15,156 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:15,245 Microsoft Outlook: CFURLCreateWithString was passed this invalid URL string: '/EWS/Exchange.asmx' (a file system path instead of an URL string). The URL created will not work with most file URL functions. CFURLCreateWithFileSystemPath or CFURLCreateWithFileSystemPathRelativeToBase should be used instead.
06/12/11 03:05:15,347 Microsoft Outlook: CFURLCreateWithBytes wAfter biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it. -
Iphone 4 front camera not working even after reboot,resets and restore.
i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help meIf setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center -
After reboot, iMac will not connect to wi-fi automatically
I very recently purchased iMac 27" with Intel i5. The issue is the wi-fi disconnects after rebooting the cpu. It doesn't connect automatically to the internet. It sees the router but I have to select it to connect. Although there is no need for me to re-enter the SSID password, it is a small inconvenience but I do not have to do this step for my other devices, like iPad, PC, etc. The wi-fi is there after waking up from "sleep" mode, so no issue here. I am currently using the OS X Lion. I also purchased the Mountain Lion but balked to install it yet because I read some reviews about it that it slows down some MacBooks (with retina). Could Mountain Lion have solved this wi-fi issue? Or should I take the iMac back to the store and let them fix it for me?
ML has caused more of this problem I believe.
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.
If not take it back. -
Mac OS 8.6 Auto network connect to a server after reboot is not working
We have multiple old blue and white systems on a network. All but one will automatically connect to the network when rebooted. I have gone into Chooser, Appletalk, put in the server IP address, put in the server password, checked the boxes that say remember Server name and password for next startup. I can connect at that time with no problem. When I reboot, the server does not automatically hook up. I have to go back into Chooser, etc. I created an alias on the desktop, but it still prompts me for a password to connect. I have performed a clean install of the Mac OS 8.6. It still does not connect to the server after reboot (after configuring all the settings again after the clean install). Please help..
Hi,
Thank you for posting in Windows Server Forum.
Can you please create the database manually with below command and verify.
PS C:\> Set-RDConnectionBrokerHighAvailability –DatabaseConnectionString
"DRIVER=SQL Server Native Client 11.0;SERVER=<SQL Server
Name>;Trusted_Connection=Yes;APP=Remote Desktop Services Connection Broker;
DATABASE=<DB Name>" -DatabaseFilePath "C:\DbFiles\<DbName>.mdf"
-ClientAccessName "<DNS RR Name>"
Grant DBO permissions to the service account on the RDS server and try to run your wizard again.
More information.
RD Connection Broker High Availability in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/06/27/rd-connection-broker-high-availability-in-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
Volume control not working after I plug in speakers or headphones
When I turn on my 13 inch with Mac OS X version 10.6.8 or if I restart it, my volume works perfectly. However, whenever I plug in earphones or speakers the volume will be 'stuck' on the loudest it can go. When I use the volume controls on my keyboard or the slider at the top menu bar, it will make the clicking sound as if the volume is going up or down and will show the white speaker with the volume being adjusted but the volume will stay on the loudest possible setting. Even after I unplug my speakers/headphones the volume will continue to not work. There is no red light coming from the headphone jack and since it works upon startup, I'm inclined to think it's a software issue and not a hardware issue but then again, I don't know the first thing about computers. Since this has started, I've looked online for similar problems or suggestions but nobody has had this exact same issue, but I did follow the suggestions for similar issues. I repaired the disk (I could only do it for the Macintosh but I am running bootcamp with windows on the other side but I've used it maybe once for a pc only program and have never run the internet on it so I doubt the problem is coming from that side). It repaired a bunch of stuff but it didn't fix my issue. I also reset the PRAM and the NVRAM (I don't know what this does, but someone suggested it so I gave it a shot) and it did nothing. If you have a suggestion for something I can do, please be detailed, or point me to detailed instructions because my computer knowledge is very limited but I'm willing to work to fix this. Thank you!
Make an appointment at the Genius bar at the Apple store.
Ciao. -
Hyper-V 2012 R2 - Linux Guest VLAN Settings lost after reboot
Hi Guys,
last night a have seen a strange behavior with a Sophos UTM 9.204020 Linux Guest VM. (This VM is based on SUSE SLES v11? i think)
So i have Setup this in my home lab and experienced the same problem.
----Setup-----
2 External VM Switches
Management OS is on VLAN 4093 with IP 192.168.20.1
The guest network adapter is in Trunk Mode, VLAN Tag (4093) is set in the guest OS with IP 192.168.20.100
Everything works until you kick off a reboot from the guest or hyper-v console, after the reboot you loose the connectivity on the network adapter with the vlan trunk.
If you shutdown the guest and start it everthing works again - this happens only on reboot!!
I have tried diffrent things (static mac, enable disable hardware features (vmq/offloading etc) on the vm network adapter but always the same error.
After some search on the net i have found this article: Link
This guy has the same problem with another linux vm (based on debian) his workaround was to trigger a powershell script with the eventlog after reboot of the vm, this works for me too but this must be bug?
Has anyone else experienced this problem?
AndréHi Andre,
I would suggest you to install the supported Linux guest OS on hyper-v , please refer to following link:
http://technet.microsoft.com/en-US/library/dn531030.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Express does not reconnect after reboot of Extreme
My extreme is conencted (via ethernet) to my router (bridge mode)
My Express is connected to Extreme to expand wireless network (bridge mode)
However when i reboot the extreme, the Express is no longer visible
I have to reboot as well. is this normal?
Also, logically (as per above config) the extreme & express are part of ONE wireless network
So a device conected will "roam" between the 2 as if it's only 1 wifi point (?)
However when i connect a wireless security camera, it shows me express & extreme seperately (eventhough same name & login)
and I have to choose to which one to connect.
IThis means if it's connected to Express & Express stops working, then
it will NOT got directly to the extreme (eventhough it's well in range)
Plsd to hear
EgonHi,
Firstly, please make sure your Microsoft iSCSI Initiator Service is set to Automatic start.
Seccondly, I found another thread that had similar problem with yours, you can take its sloution as reference.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ff26e741-0e2d-47f9-9132-859750ef1514/windows-2008-iscsi-does-not-automatically-connect-to-targets-after-reboot?forum=winserverClustering
In addition, please refer to the blog below for more reference to set ISCSI connect automatically after system reboot.
Managing iSCSI Initiator connections with Windows PowerShell on Windows Server 2012:
http://blogs.msdn.com/b/san/archive/2012/07/31/managing-iscsi-initiator-connections-with-windows-powershell-on-windows-server-2012.aspx
Roger Lu
TechNet Community Support -
I'm a new user - recent convert from longtime Windows to Apple. Thought having desktops and computing aligned with phones and tablets would help. Not so far.
I have a MacMini running Mavericks 10.9.1, and an iMac running Mavericks 10.9.1. File Sharing is set up on both. If either device is rebooted for any reason, file sharing from the Mac Mini to the iMac "breaks" and will not easily restart. Various things eventually brings the connection back - usually having to do with checking and unchecking File Sharing, the AFP button, and/or the SMB button on the iMac - but never the same procedure twice in a row. File Sharing from the iMac to the Mac Mini is never disrupted - always comes back up without a problem. Screen Sharing also works between both without fail, and comes up after reboot of either. No problem there. Only difficulty is from Mac Mini to the iMac.
Why? Any ideas?Should also clarify - usually takes multiple hours of checking/unchecking file sharing settings in order to restore the share between Mac Mini and iMac. NEVER happens automatically.
This is disruptive because I've got the Mac Mini pointing to several file locations on the iMac for various things - photos, music, etc. - and they all hang up unless the share is restored. Real bummer. -
Calendar Settings reset after reboot
Hi,
Could anybody please check if you have the same issue on your phone?
Sony Calendar resets settings after reboot.
For example, if I set "Week starts on" = "Monday" and reboot the phone, this settings will be back to "Sunday" (which is the default).
I am now running Calendar 20.0.A.2.5, but I believe this bug was there before as well (even on my old Xperia V, I believe)
P.S. I found this topic, but either I didn't understand the solution correctly or it doesn't work for me... I tried to disable the Calendar app, but it didn't help in any way...
Solved!
Go to Solution.I will forward this internally for further investigation. I will update you as soon as i have more information.
But as a possible workaround, i suspect you have selected a country/region under Settings -> Language & input -> Language where the week normally is set to start on Sunday like English US? If you are in the Netherlands but want the phone on english you could try setting it to English UK instead to avoid this until i have more information.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.
Maybe you are looking for
-
OS 10.4.5 and Epson Photostylus 750
I have just upgraded my G3 Pismo Powerbook to run on OS 10.4.5. So I downloaded the relevant driver for the Stylus Photo 750 from the Epson website and installed it. I printed a document, selecting the Stylus as the printer. The document spooled to t
-
Hi , what is the difference between,select single and select upto one row . In a select statment . Thanks , shankar.
-
Use Chains, or PL/SQL Block of calls.
I currently have a half dozen cron jobs that kick off different batches of processing. Originally, these were generally a sequence of C programs that did different operations (fetch student info from student record system and load into IdM system, pr
-
Is it possible to add a watermak to the PDF to send samples out to clients? Or just add a background image?
-
I am trying to restore my iphone 4 ios 6 to acheive unlock. hit restore and it unloads software, confirms with apple then displays the 3194 error. I have turned off my virus scanner, unplugged all usb except for iphone, edited the hosts file and ru