After rebooting from Idle State, music sounds like vibrating not normal

After shutting off my computer into the idle state and restarting it (so all the programs that have been open before are in the same state again), iTunes does not play music normal anymore.
The music sounds as if it is cut into many pieces, a long tone would be cut into many very short tones and it sounds like vibrating.
It does not help to exit iTunes (really exit it in the system tray), only reboot helps.
Any suggestions?
Thanks
Svkoch
Acer Travelmatr 290 Windows XP Pro

Kwondoo,
I am sorry. If you need direct assistance from Creative, please go here. Customer support does not monitor these boards.

Similar Messages

MacBook Pro won't sleep in OS X after reboot from Windows (again!)

This problem originally occurred about a year ago and no solution was found then but after a time, it simply went away. Well, now it's back: after a reboot into OS X (10.6.7) from Windows (7 Ultimate 64 Bit), my MacBook Pro refuses to sleep until rebooted a second time, after which it behaves correctly again. The Console log reports the following message: "System Sleep prevented by active remote login session (600 second threshold)". I've disabled Growl and DropBox (possible suspects last time) to no effect, reset the SMC and PRAM, all the usual things. I've tried when connected to mains power or battery, on wired, wireless or no network at all and still the same problem. Sleep behaviour under Windows is correct. Hopefully the problem will eventually cure itself as it did last time but I would like to discover the reason and find out what this "remote login session" could possibly be. To reiterate, this ONLY occurs immediately after rebooting from Windows.

Tried repairing BootCamp in 7, no change, don't think there was anything wrong with it in the first place.
Here is a section of the log after reboot from BootCamp and it says "System Sleep prevented by active remote login session (600 second threshold)". This ONLY happens after a reboot from Bootcamp, after another reboot all goes back to normal. What could the "active remote login session" be?
From log:
21/04/2010 23:08:56 kernel PM notification cancel (pid 16, configd)
21/04/2010 23:08:56 kernel IOPMrootDomain: idle cancel
21/04/2010 23:12:00 configd[16] PowerManagement configd: System Sleep prevented by active remote login session (600 second threshold).
21/04/2010 23:12:00 configd[16] PowerManagement configd: tty sleep preventer: /dev/console
21/04/2010 23:12:00 configd[16] PowerManagement configd: System Sleep prevented by active remote login session (600 second threshold).

MacBook Pro won't sleep in OS X after reboot from Windows

I have Windows 7 Ultimate 64 bit running on a BootCamp partition on my MacBook Pro running OS X 10.6.3. When I first installed 7 last year, I initially had a strange problem in that the Mac wouldn't sleep (default settings) when rebooted back into OS X from BootCamp. If I did another restart in OS X, everything returned to normal. I never found a solution to the problem but after a while it went away and things worked properly. Now, after several months and for no good reason I can think of, the problem has returned. Everything works correctly in both OSs except for this. Any help would be appreciated.
Clive

Tried repairing BootCamp in 7, no change, don't think there was anything wrong with it in the first place.
Here is a section of the log after reboot from BootCamp and it says "System Sleep prevented by active remote login session (600 second threshold)". This ONLY happens after a reboot from Bootcamp, after another reboot all goes back to normal. What could the "active remote login session" be?
From log:
21/04/2010 23:08:56 kernel PM notification cancel (pid 16, configd)
21/04/2010 23:08:56 kernel IOPMrootDomain: idle cancel
21/04/2010 23:12:00 configd[16] PowerManagement configd: System Sleep prevented by active remote login session (600 second threshold).
21/04/2010 23:12:00 configd[16] PowerManagement configd: tty sleep preventer: /dev/console
21/04/2010 23:12:00 configd[16] PowerManagement configd: System Sleep prevented by active remote login session (600 second threshold).

Music Sounds Like the Chip Munks singing

I have an a6537c Pavilion and the music sounds like junk. Sounds like the Chip Munks. What can I do?

Well... sounds like you have an audio enhancement enabled. There are a few places where they can be set. Check the following places to turn them off:
Windows Media Player 11
1. Play music
2. Right-click menu bar.
3. From the menu that opens, select View, Enhancements, and Play Speed.
4. Adjust the Play Slider to 1.0
Windows Sound (Realtek codec)
1. Right click the volume icon next to the time in the taskbar.
2. Select Sounds.
3. Select the Playback tab.
4. Select your default playback device denoted by a green circle with a check (probably Speakers).
5. With the playback device selected, click the Properties button.
6. Click the Enhancements tab.
7. Select Disable all sound effects.
8. Click OK.
Hope this helps.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this?

On my new iMac, mail has no sound after waking from sleep. If I select do not wake for network access in general preferences, the problem does not occur. Anyone have an idea on how to fix this? Thanks --

Same here on an older iMac since Lion. Thanks for the uncheck wake for network access tip though, it doesn't do it either in that case, I will leave it that way.

No bass-music sounds like a tin can. Cannot adjust sound

I just got a new Ipod. My music sounds terrible. No bass-the music sounds like a tin can and I cannot adjust the sound. HELP

I'm having this problem too. Additionally, sometimes the tinny music comes through the external speaker as well as the headphones. When the sound is 'off', the volume cannot be adjusted.
My nano is more or less possessed, actually. The artwork for my music is absolutely bizarre - not just wrong and mixed with another album cover that I actually have, but completely random artwork.
I can handle the strange and frequently amusing artwork - the inability to adjust my sound and inability to turn off the external speaker is killing me.
The apple store recommended restoring the nano through itunes, which seemed to help the artwork issue, but the speaker/earbud issue just seemed to get progressively worse.
Sorry for the lack of answers - I would love, love, love to fix this and have a properly functioning nano (my classic has been perfect for YEARS). Still, sometimes it seems to help to commiserate.

Nano sounds terrible, music sounds like it's in a tunnel!

I loaded my entire I-Tunes library on my new nano, but the music sounds like it is in a tunnel. I have tried 4 different pairs of headphones and completely wiped it out and RE-loaded the library again, with the same results. I tried to change the EQ option, but nothing has helped. Any suggestions or should I go back to the Apple store to get a new one?

had the same problem...seems alot of people are...the headphones may appear to be all the way in but they aren't. i shoved them in and they work fine now

My music sounds garbled - is not playing correctly

This is my son's iPod and Im not sure what he has done to it, but the music sounds like it is being played under water. I have did the 5 R's and also wiped out all the music and reinstalled it and Im getting the same effect. It is not the ear buds either. Not sure what else I can do for it. Any suggestions???
Ipod Nano 2nd Gen Windows XP

If you have done the 5 R's and tried multiple pairs of headphones and it still does the same thing. I would suggest setting it up for repair if it is still under the warranty, as it may be the headphone jack itself or something else hardware related.
Set it up here
Or give a call in to apple's tech support to have them set it up.
Mac OS X (10.4.8)

Change the language of iphone from English to Chinese and iphope are not normally loaded and not opened. what can I do to restore it;

change the language of iphone from English to Chinese and iphope are not normally loaded and not opened. what can I do to restore it;

I found a fix for it, It turned out that the file that lists all of the songs on it got corrupt. I had to use 3rd party programs but it did work out in the end
Here is a link to where I found the fix: https://discussions.apple.com/thread/3631590?start=0&tstart=0
I followed the instructions of Geekdad3 a little bit lower on the page.
Good luck for anyone else who has this problem

Music sounds like a CD

Today, as I was online and listening to music, but the music all of a sudden sounded like a scratched CD that doesn't play. It just happened for a little bit, but I wanted to know if it's normal. I was on Google while I was listening to music.

First check your computer's iTunes library for any content that may seem to have scratchy music. If you find any audio recordings on there that are this way, you could report this problem on your account:
* Store - View My Account
* Purchase History
* Comb through all your purchases for the bunched up titles
* Press the right arrow next to the billed purchase
* Click "Report a Problem"
* Explain the situation when you purchased the music
If it seems to be not from the computer but from the iPhone, two solutions:
* Reboot the iPhone on a complete shutdown (Hold power and turn off)
* Go onto iTunes PC when the iPhone is plugged in and disable music sync or uncheck all music.
** iPhone - Music Tab - Sync Music
or
** Checkbox "Sync checked music and songs" from the PC's iPhone screen
** Go to music on PC iTunes
** CTRL+A - Right Click - Uncheck Selection
* Resync to delete all iPhone music
* Undo what you did to readd the music

Music sounds like it is under water

Hi all,
I recently got a new computer... IBM Thinkpad T43 and I installed iTunes 6. Now when I play music it sounds like it is under water or experiencing interference from somewhere. I have tried uninstalling and re-installing but that didn't help.
Any suggestions?
Thanks.

I experience the exact problem, but I cant find the topic where there was a solution posted... my ITunes Music very often sounds like under water, static interferences and all the rest of it, but the files are not damaged, they work perfectly well in WMP, WinAmp, RealPlayer...

[SOLVED]Keyboard and touchpad doesn't work after reboot from Arch

Excuse me, but i'm a newbie. I'm not sure if this is an arch problem, but i will just post it here.
I've beening using Arch64 and it works just fine. However, every time i reboot from arch into Windows 7 (32bit), the keyboard and touchpad will stop responding just when the Win7 splash screen shows, however the mouse works fine. Then when you shutdown the computer (from win7 now) it will take apparently longer time, and sometimes i have to press the power key 5 seconds to make it shutdown.
It seems the correct way (to reboot from arch to win7) is to shutdown down the computer first and start it again, and everything will work fine.
And rebooting from win7 to win7 or arch to arch or win7 to arch will work fine too.
I'm glad to post extra information, but I've got no clue and i'm not sure what to put here.
The laptop is a Lenovo Y450 with Intel Core Dual P7540, 4G Memory, NV GT240M. Kernel version of Arch is 3.0.6 (but the problem existed long since earlier versions) I don't have a swap partition. If you need extra information, please mention the item.
Thanks a lot!
Last edited by crlf0710 (2011-11-15 10:29:38)

Hi!
That is indeed strange. Since your external mouse works fine (which probably is connected via USB, right?) it appears that the problem lies somewhere around the internal keyboard/touchpad access. I'm not sure how this works with a Lenovo Y450, but just try to enter BIOS (in case you have not been there, you probably have to hit F1 or F2 during startup - less likely it would be delete or escape ...) and look for your keyboard/touchpad options.
You should probably find something like "... legacy support ...". This is a relic from PS/2 times and emulates your internal input devices as PS/2 devices. So - when found, just change the setting (you cannot mess anything up, and both systems will probably not even pop up a message). My guess is it is set to "enabled" and Arch somehow messes with the PS/2 emulation in your case .... so just turn it off.
good luck

HD videos from Sony NEX-3 sound like the Chipmunks

My Sony NEX-3 720p MP4 videos sound like the Chipmunks. Video frame rate appears ok but the sound is way too fast. The files play nicely e.g. in Preview though.
iMovie imports the files nicely, using the internal SD reader in my iMac. However, the sound is out of sync in the imported files. From the sound of it, it seems the audio runs at least at 2x the speed.
Currently I use Handbrake for converting the camera clips into 25 fps m4v and then importing these into iMovie but it is a pain.

Can you tell me how you imported the video from your NEX-3 to iMovie? When I try, the camera automatically opens iPhoto and imports it there. If I open iMovie, all of the selctions are grayed-out so I can't import them. I've tried getting the video straight from the camera but can't seem to do that either. Can you help?

External USB drive not recognized in OS X after rebooting from Boot Camp

Thanks in advance for any help. Here's the situation:
Everything works fine in OS X (10.5.2). In particular I have an external USB harddrive that I keep my iTunes songs on.
Then I boot via Boot Camp into Windows XP and play a few games. Then I reboot out of XP and back into OS X. At that point the external USB harddrive does not show up on the desktop. If I turn off the harddrive and turn it back on again, it shows up and is usable. I can continue to do that, but I would appreciate any advice on how to get the harddrive to show up when rebooting from XP (without requiring it to be turned off and on).
Thanks!

I've surfed around already before having my problem posted here because it's so frustrated…
AnaMusic: I've tried that but it isn't worked
Eric Ross: it's checked
LexSchellings: I did run "verify disk" and "repair disk" -> but no luck… My hard drive isn't mounted to Lion as shown in status. Is it something to do with NTFS format? I came across some forum and read that Lion is design to natively support NTFS..
Are there any ways around???

HT4061 how do you do a system reboot from the computer when your phone is not working

I would like to know how to do a system reboot from the computer. The Verison rep said that is what I need to do to fix my phone but they did not have the equipment to do so.

Do you mean restore your phone? You'll need itunes on your computer, plug your phone to your computer open itunes and select restore.

After rebooting from Idle State, music sounds like vibrating not normal

Similar Messages

Maybe you are looking for