After rebuild, can't reboot, came to the uilities (cmd-R)

After rebuild the desktop with - cmd-R - and everything is OK, I do a rebbot, and the Mac came again to the  -cmd-R....... The disk is OK...

Restart, holding down the OPTION key until icons pop up. When that's finished, select your normal boot volume, and click the arrow under it.

Similar Messages

  • Install problem on snow leopard. Circle and picture of CPU. Reboot came back the same

    Install problem oh snow leopard. It stopped and I have an illustration of a CPU and something like a picture of the switch. And a circle thing like it spinning.
    I let it go for 9 hours and then tried rebooting. After reboot it Came backas the same illustration.

    You can get the iLife ’11 DVD on eBay fairly cheap. http://www.ebay.com/sch/Software-/18793/i.html?_sop=12&_trkparms=72%253A1234%257 C66%253A2%257C65%253A12%257C39%253A1&_sc=1&_nkw=ilife%2011&_pppn=r1&_dcat=41859& LH_Auction=1&LH_BIN=1

  • Fusion 4.1.2.  After install can no longer print on the Mac side.

    Version:1.0 StartHTML:0000000167 EndHTML:0000003793 StartFragment:0000000475 EndFragment:0000003777         
    Greetings,
    I'm using a MacBook Pro running OSX SL at the most current level.
    I upgraded from Fusion 3 to Fusion 4 (uninstalled 3 first then installed 4) after which I did the update to Fusion 4.1.2 which appeared to run fine.
    Being I'm new to the Mac I installed Fusion because I need Windows-XP.
    Prior to the installation of Fusion I spent 2 weeks trying to get my printers working just on the Mac side without Fusion.  I'm using an HP Deskjet 5850 (5800 series) printer which worked just fine.  The printer is an IP printer at IP address 192.168.1.11 and can be pinged from both the Mac side and the Windows-XP side. Before Fusion there wasn't any issue printing on the Mac side.
    After Fusion installation I didn't have any issues printing on the Windows side.
    Now with Fusion installed I can still print on the Windows side but not on the Mac side.
    All settings are as normal with printer sharing.
    When trying to print on the Mac side I see the printer queue for the HP pop up and it says 'waiting to connect' to 192.168.1.11.
    I tried a dozen different settings non of which worked.
    I switched from a NAT connection to a Bridged connection for Windows but still the same result, no printing from the Mac side.
    Is there a problem with this release of fusion or is it somewhere in my system settings?
    Any help will be appreciated.
    Thanks

    Run through this list of fixes including #16 then stop and report.
    Step by Step to fix your Mac

  • After Upgrade can't preview/download from the ITunes Store-I have internet

    I just upgraded my ITunes and now am unable to preview anything from the ITunes store. I can listen to the radio from ITunes fine-I definately have internet-I've browsed through help and emailed for help! Anyone know what to do?? I get a message saying 'make sure your internet connection is active and try again'

    Received email response from support and works fine now. Thank you so much! Highly advise anyone else to do the same as the response was clear and fast!

  • Can you assign attributes via the OutlineLoad.cmd utility?

    I create a attribute dim named 'Project Admin' with base dim 'Project'. I now want to assign the person to the various Project ID's under Project. Can I do this via OutlineLoad.cmd? The examples in the Planning Admin Guide don't give one of assigning these. I tried the below but it just created a new Attribute Dim named 'TextAttrib' for the Project Dimension.
    OutlineLoad.cmd /A:APPNAME /U:admin /M /I:F:\cripts\Automation\scripts\Metadata\ProjMgr\DimBld_Files\ProjMgr.csv /DAT:TextAttrib:"Project" /L:F:\scripts\Automation\scripts\Metadata\ProjMgr\Logs\ProjMgr.log /X:F:\scripts\Automation\scripts\Metadata\ProjMgr\Logs\ProjMgr_Bld.exc /C
    My ProjMgr.csv file looks like. Just trying to get sample to work before I try thousands....
    TextAttrib,Parent
    Davis_William,Proj_12345

    You can assign attributes while loading your project dimension, see below for .csv format
    Project,Parent,Alias:Default,Data Storage,Project Admin
    Project_12345,Project_12345_Parent,,Davis_William
    Good Luck
    Edited by: User7876731 on Apr 25, 2012 2:15 PM

  • How can I reboot my Ipad when I do not have access to the power off screen?

    My device slide off my couch while in its cover. IT was working afterwards, for about 5 min. I sat it down while I took something out of the oven and was back maybe 5min. or so later. When i try to access it, all I see is a black screen. I cannot unlock it or even power off. How can I reboot it without the power off swipe ?

    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reboot/Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
    Restore: Connect your iPhone to iTunes on your computer, backup, and then select Restore to Factory

  • After I import a movie file from the camera memory card, Imovie 10.0.1 acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it worksnow?  Thank you, Filippo

    On IMac 10.9  After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now?  Anyone know?  Thanks, Filippo

    I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
    I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
    Thanks

  • After I make a note in the notes icon that came with the ipad, it immediately is emailed to my email address and disappears from notes. How can I make it stay on notes?

    After I write a note in the notes icon that came with the ipad, it immediately emails it to my email account and erases it from the note pad. How do I make it stay on the notepad? I don't particularly want it emailed to me.

    I have a test with some questions (multiple choice, FIB, matching, etc). I have just one button to submit all the answers, and after submiting the student can see his score and review the test to know where he failed. He can't answer again. However, he can change the answer multiple times before submiting.
    "if i turn on success/failure captions the student will see them while answering" - before submitting
    "if i turn them off he wont know what's the right answer" - after submitting
    My results page is the default. I didn't use any variable. When i go to the results page after reviewing the test all the entry boxes are "wrong".

  • IMovie has frozen up on me. I've tried rebooting and reinstalling the apps- no help. I can play some of the files- but I can't get into the libraries.Even when I can get something to play the whole system crashes after a few minutes. What can I do?

    I desperately need your help. I was working on iMovie last night when the thing froze up on me. I've tried rebooting. I've tried reinstalling the apps. No change. I can play some of the files- although I can't tell which ones will play until they magically appear. I can't get into the project library or the event library. The bar that lets me scroll through the clips is gone. Even when I can get something to play the whole system crashes after a couple of minutes and generates a "problem report" that says "iMovie Quit Unexpectedly". This all started when I was adding cutaways- and one clip just would not load. After I tried several times everything froze up. Have you ever heard of something like this? Maybe I pushed a button or somehow changed a setting? Maybe some of the video is corrupt? What do you recommend?
    Thanks for any advice you can offer!

    I have tried all the above and nothing seems to work. Any other suggestions?

  • After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer u

    After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer use my iPad.

    You need to restore the iPad.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If that will not work, you will need to use Recovery Mode to restore.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • I disabled my Macbook  Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

    I disabled my Macbook  Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

    How do you disabled it if running the same?

  • Upon launch of Lightroom after initial instalation a warning came up that said lightroom needs to create temporary files and cant open.  The it opened and the catalog i imported will not show the images.  How can I give permission? Running windows 8.1 64

    Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open.  Then it opened and the catalog i imported will not show the images.  How can I give permission? Running windows 8.1 64 bit.  I have avast virus software.

    Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open.  Then it opened and the catalog i imported will not show the images.  How can I give permission? Running windows 8.1 64 bit.  I have avast virus software.

  • I move my videos from camera roll to a new folder. After i turn off & on my phone, the videos disappears. The videos are very important to me. Please please help. how can i retrieve?

    i move my videos from camera roll to a new folder. after turn off & on again my phone, the videos disappears. the videos are very important to me. Is there any way i can retrieve it? please please help. thanks.

    Photo Stream is not a backup.
    Photo Stream has a limit so is temporary.
    iTunes does not handle the import of photos/videos from any digital camera including from the iPhone's Camera Roll.
    Photos/videos in the Camera Roll can be imported by your computer as with any other digital camera.

  • After downloading photos from my Nikon, I accidentally deleted them from the card.  The photos are in IPhoto.  Can I recover them to the camera card?

    After downloading photos from my Nikon, I accidentally deleted them from the card.  The photos are in IPhoto.  Can I recover them to the camera card?

    Probably -will your card mount to the desktop? If not you will need a card reader - select the photo(s) in iPhoto and export to a desktop folder - mount the card to the desktop and drag the photos to the corredct folder on it
    LN

  • TS3274 After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

    After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

    Hi Midnightbrat,
    Welcome to the Support Communities!
    The troubleshooting steps for the camera on the iPad are similar to the iPhone:  I've highlighted the pertinent steps below:
    Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Camera
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
    Try turning the iPad off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try switching between the front and the back cameras to verify if the issue persists on both.
    I hope this information helps ....
    Have a great day!
    - Judy

Maybe you are looking for