After recent update I am having intermittent Internet connection issues

Recent update was midweek of June 17-23. Have been having constant issue with connecting to the Internet.
Anyone having same issue?
I have to stop the airport then restart airport and wait a minute then it's working fine for like 5 minutes. It is unbearable! I get an exclamation on the airport icon in the menu bar. I have to repeat steps again...over and over and over.

Troubleshooting Wi-Fi issues

Similar Messages

Does anyone know if apple is working on a solution to fix the wifi drama ( greyed/dimmed out)hundred of ppl have after recent updates?

After recent updates hundred of ppl can not connect to wifi anymore( incl myself)
Really annoying and all kinds of ideas how to fix it did not work out for me
I am out of warranty for 1mth and the apple shop did not even make a bit of afford to help
I am wondering if apple is working on a solution to fix this problem at all? Maybe with the next update?

I am aware of that !I just wonder if anyone has any news about this dramas-I actually hope someone says that apple is try to work on it!
No way they can leave all this ppl out there with this problem without doing anything about it

Internet Connectivity Issues

By process of elimination, I may have the right source of my problem, but may not!
Recently purchased a Time Capsule, primarily to replace my old Airport Extreme and extend its effective range within a new house. At the same time, I upgraded my iMac OS to Snow Leopard (so maybe this has caused a problem?!)
In the last few days have been having severe internet connectivity issues - either v slow speeds or so slow that Mail and/or Safari times out. My ISP tells me that their lines are working fine (I know they would say that, wouldn't they) and, admittedly, my old Powerbook (connected to the Airport network and onto the DSL router) is running Internet applications fine. So somthing seems to be wrong with the iMac or its setup.
Have run Network Diagnostics which tell me there's no problem (except it's still really slow!) and have obviously rebooted repeatedly (including the router and Time Capsule).
Any ideas?

Hello AnaB4,
Welcome to the HP Support Forums!
I see that you are getting a message to connect to server to update ink levels when printing with the 8620. This has been an issue since the weekend, server problems have been noted as the cause. The only resolution I know of at this time is to follow the steps here: Re: How do I correct the date on my HP Envy 4500?, or keep hitting OK.
Cheers!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

After the recent update I am having issues with Flash based games freezing and not responding.

After the recent update I am having issues with flash based programs not running or loading correctly. The programs will not load or take an extremely long time to load compared to jsut a few days ago. This happens across the board on anything flash based. Also, once they do load they will freeze, stop responding or need to be constantly refreshed to come back alive which is short lived at best. I went thru the help and did all the file deleting, cache clearing, disabling hardware acceleration, removing then reinstalling flash, and even removing and reinstalling my browsers. None of this has helped at all. I am using Chrome and it is up to date and I checked my Flash player and it is up to date. I am running windows 7 64bit.

Here's what you're up against guys,
Adobe writes the base code for Flash Player, and then hands it off to Google, who adapt it to a PPAPI plug-in (it's NPAPI when Adobe writes it). It's then "PepperFlash" and Google embeds it in their Chrome browser. While Google is pushing a "webwide" move to PPAPI Flash Content, a reinvention of the wheel so to speak, not everyone "got the memo", and Google is slowly making it so that PepperFlash will block NPAPI Flash content from running properly, and you have to disable PepperFlash to force the NPAPI plug-in to work, which sometimes fixes it, sometimes not. I have a feeling this is only going to get worse. HTML5 will eventually resolve the video end but game developers need to come up with something that won't require a plug-in.
And to the first post: Since PepperFlash is embedded in Chrome by Google, you can uninstall and reinstall Flash Player from here until your hard drive literally seizes up.... guess what? It has NO EFFECT at all on the PepperFlash plug-in in Chrome because it's a separate file in a separate folder and the uninstaller & installers don't have anything to do with it.

Premiere Pro Windows crashing after recent updates

Machine specs: HP Z820 - zeon e5-2690 48gb ram quadro k5000. Since the recent updates & complete wipe of the system & fresh install, Premiere pro CC crashes regularly without any pattern. Using MXF files while editing if that helps-i did read a thread about that - but it was old. This is a new problem. The event viewer information:
Faulting application name: Adobe Premiere Pro.exe, version: 8.1.0.81, time stamp: 0x5426694c
Faulting module name: mc_dec_mp2v.dll_unloaded, version: 0.0.0.0, time stamp: 0x53f72b76
Exception code: 0xc0000005
Fault offset: 0x000007feea381a30
Faulting process id: 0x2168
Faulting application start time: 0x01cfe7cdce8c2c97
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
Faulting module path: mc_dec_mp2v.dll
Report Id: ba9aeb2b-53c1-11e4-b3dd-24be05e2e6a2
Audition has also started crashing as well. Info:
Faulting application name: Adobe Audition CC.exe, version: 7.1.0.119, time stamp: 0x5421531b
Faulting module name: MSVCR110.dll, version: 11.0.51106.1, time stamp: 0x5098826e
Exception code: 0xc0000005
Fault offset: 0x000000000003c780
Faulting process id: 0x249c
Faulting application start time: 0x01cfe7ebfe3ea9e0
Faulting application path: C:\Program Files\Adobe\Adobe Audition CC 2014\Adobe Audition CC.exe
Faulting module path: C:\Windows\system32\MSVCR110.dll
Report Id: 4d975a0f-53e3-11e4-b3dd-24be05e2e6a2
Any Ideas?

Re:
Premiere Pro Windows crashing after recent updates
Try finding MSVCR110.dll file on internet and replace it in the path C:\Windows\system32\MSVCR110.dll
hopefully it works...

After 5.1.1 update, Apple TV knocks off Internet connection.

Connects fine to computer, Netflix or iTunes (though not to my iPod Touch Remote app). I see my Netflix queue and all the movies and music on my computer. But when I try to stream something from any of them, the spinning gear goes endlessly, and Internet connection is broken for all devices. I have to reboot modem and router.
Took it to local Apple store, he did a restore (which I'd already done at home anyway) and it worked fine there, including iTouch. Hooked it up at home, same problem. Apparently the update doesn't play well with either my router, the modem or AT&T. How do I troubleshoot this?
I have 2nd gen Apple TV, AT&T DSL (Motorola modem) and D-Link router. Everything worked fine for almost two years, until the latest update.

I am having hte EXACT same issue. I have been back and forth with iTunes support for 2 weeks about this. Its also throwing offf all my other devices and popping up the same message on iPhone and iPad. Im surprised others arent having this issue or are just not updating yet to the latest software. I found that completely logging out of my iTunes account on the Apple TV after "Verifying" my payment info stops the problem. BUT THEN I CANT RENT MOVIES! Great consumer experience. Annoy the **** out of people so then they cant use your product for its intended purpose. FIX THIS APPLE!
Sorry for ranting but this has been plaguing me for 2 weeks since the update and I use my Apple TV daily.

HT201321 im having inconsistent internet connection on my macbook pro. But my other computers doesn't had this problem.do you guys had the same problem? after turning the wifi on and off, i'll have the connection again

Im having inconsistent internet connection with my macbookpro 13 inch. But if I turn off my wifi and turnit on again, it will come back again. Anyone had this problem?

Sig,
Thanks for the advice. I finally tried a solution after doing nothing. LoL. What I did do was change the channel the router was on from 9 to 7. I think I've done something like this in the past when I had slow internet and that worked out well too. I thought that would help and so far so good. Not an interruption so far but we shall see. To the guy or girl who expressed that they had the same problem as me I would try changing the channel of your router like I did. I will monitor the situation and see if it totally solved my problem or not and keep this thread updated. Thanks people

Serious connectivity problems after recent updates

Hi
I have serious problem with my WIFI after recent updates from App Store.
I have good router, good internet connection and strong signal - I tested it on Windows on bootcamp and everything work perfectly.
iPhone also works with no problems.
On OS X it's very hard to load a web page, only sometimes it works good, as shown on ping, i have 41% packet loss:
apple ~ $ ping google.com
PING google.com (77.252.2.84): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
Request timeout for icmp_seq 4
Request timeout for icmp_seq 5
64 bytes from 77.252.2.84: icmp_seq=6 ttl=61 time=10.822 ms
64 bytes from 77.252.2.84: icmp_seq=7 ttl=61 time=11.484 ms
64 bytes from 77.252.2.84: icmp_seq=8 ttl=61 time=10.331 ms
64 bytes from 77.252.2.84: icmp_seq=9 ttl=61 time=7.437 ms
Request timeout for icmp_seq 10
Request timeout for icmp_seq 11
Request timeout for icmp_seq 12
Request timeout for icmp_seq 13
64 bytes from 77.252.2.84: icmp_seq=14 ttl=61 time=10.638 ms
64 bytes from 77.252.2.84: icmp_seq=15 ttl=61 time=6.316 ms
Request timeout for icmp_seq 16
64 bytes from 77.252.2.84: icmp_seq=17 ttl=61 time=10.694 ms
64 bytes from 77.252.2.84: icmp_seq=18 ttl=61 time=15.901 ms
64 bytes from 77.252.2.84: icmp_seq=19 ttl=61 time=46.882 ms
64 bytes from 77.252.2.84: icmp_seq=20 ttl=61 time=18.987 ms
64 bytes from 77.252.2.84: icmp_seq=21 ttl=61 time=18.911 ms
64 bytes from 77.252.2.84: icmp_seq=22 ttl=61 time=7.705 ms
64 bytes from 77.252.2.84: icmp_seq=23 ttl=61 time=8.714 ms
64 bytes from 77.252.2.84: icmp_seq=24 ttl=61 time=18.261 ms
64 bytes from 77.252.2.84: icmp_seq=25 ttl=61 time=8.952 ms
Request timeout for icmp_seq 26
64 bytes from 77.252.2.84: icmp_seq=27 ttl=61 time=16.877 ms
64 bytes from 77.252.2.84: icmp_seq=28 ttl=61 time=7.876 ms
^C
--- google.com ping statistics ---
29 packets transmitted, 17 packets received, 41.4% packet loss
round-trip min/avg/max/stddev = 6.316/13.929/46.882/9.219 ms
I'm using no proxy, no additional firewalls, antivirus, vpns (tunnelblick is installed but not used) etc - just simplest possible wifi connection with no changes to default configuration.

I checked my System Log in Console and cannot find anything useful. One msg about the connection:
27.02.2013 07:17:41,096 UserEventAgent[11]: Captive: en1: Not probing 'NETIASPOT-653980' (protected network)

HT3775 Quicktime no longer plays wmv files after recent update

after recent update, quicktime will not open wmv files. had no problem opening them up in the past. reinstalled flip4mac codec and nothing. don't want to use quicklime player 7 b/c need to use fast forward option that will not work with QT7. Any help is appreciated.
thank you,
Damian

I ended up on the phone with an Apple iPhoto expert after scheduling an appointment online (go to Apple support). He spent an hour or so diagnosing my particular problem and was able to fix it. I can once again view all my mov files in iPhoto. Since every computer is different, you might want to try that route. He was able to view my computer screen and direct me to do different things.

My imessage is not Working after recent update

My daughters iMessage & FaceTime no longer work after recent update, can anybody help please?

It's mostly a server issue because millions of users are trying to do the same. Apple's servers get bogged down. Try waiting a bit - a day - before trying again. You can also check out this for other things to try.

After recent update to Mountain Lion, trash won't empty completely; says "item" inuse

After recent update to Mountain Lion, trash will not empty completely. Always an item left in trash, and I get message that the "item is in use." Right now, using app Trash it! to get rid of that left behind item.

Try rebuilding Trash and see if that sorts it...
Launch Terminal and copy & paste these commands:
Go to /Applications /Utilities/Terminal and launch it.
At the prompt, copy and paste this command
sudo rm -rf ~/.Trash
Press Return.
You will be asked to enter your admin password. It will be invisible.
Enter it and press Return.
Log out and back in or restart.
Let us know.

HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

IPhon 4: After recently updating to version 7.1.2, all my past calendar entries disappeared and I cannot add new entries.

After recently updating to 7.1.2, all of my past calendar entries for 22014 disappeared and I cannot add new entries??

What account were you using to sync your Calendar? Make sure that account is added to the device, and make sure that Calendars is turned on for that account.
Then, go to Settings > Mail, Contacts, Calendars, and make sure that under the Calendar section that 'Sync' is set to 'All Events'.
Then go to the Calendar app, go to Calendars, and make sure that you have that account enabled.
Then, close out all the running apps on your device, and restart it.
Open up your Calendar app. Are your entries back?

Adobe Illustrator 17.1.0 crashes after recent update

Hi,
Adobe Illustrator 17.1.0 crashes after recent update. I can work some time (maybe half an hour or 10 minutes, or 1 hour) and then it crashes again.
Here is my error:
Process:         Adobe Illustrator [706]
Path:            /Applications/Adobe Illustrator CC/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier:      com.adobe.illustrator
Version:         17.1.0 (17.0.0)
Code Type:       X86-64 (Native)
Parent Process: launchd [145]
Responsible:     Adobe Illustrator [706]
User ID:         501
Date/Time:       2014-06-13 14:08:56.167 -0500
OS Version:      Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: 4C76A327-D836-AD35-DDEF-55FB707349CD
[long crash log removed... please only send a crash log to a technician, when asked]
Model: iMac14,2, BootROM IM142.0118.B00, 4 processors, Intel Core i5, 3.2 GHz, 16 GB, SMC 2.15f2
Graphics: NVIDIA GeForce GT 755M, NVIDIA GeForce GT 755M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x111), Broadcom BCM43xx 1.0 (6.30.223.154.63)
Bluetooth: Version 4.2.4f1 13674, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE SSD SD0128F, 121.33 GB
Serial ATA Device: APPLE HDD ST1000DM003, 1 TB
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: FaceTime HD Camera (Built-in)
USB Device: Keyboard Hub
USB Device: Apple Keyboard
USB Device: PTK-640
Thunderbolt Bus: iMac, Apple Inc., 23.10
Thank you in advance.
Best Regards,
Volha.

Some Mac links that may help
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

After a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.

after a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.

Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev

After recent update I am having intermittent Internet connection issues

Similar Messages

Maybe you are looking for