After recovering password Iam locked in guest mode

after recovering my pasword I am stuck in Guest Mode or Emergency Mode wht do I do to get to my accounts?

bump

Similar Messages

500 series phones wont register after recovering password

I had to recover the password for a UC540W and followed the standard procedures that I am aware of. I went to rommon, , copy start to run, change the password, no shut on the interfaces, saved and rebooted.
The 7900 series phones work with no problem but the 525 and 504 are stuck downloading the xmldefault.cnf.xml file. It would seem that there is some other item I need to adjust during the password recovery.
What else would possibly be affected by a password reset that would selectively knockout the 500 series phones?
I did a factory reset on the 504g phone and it loaded a default screen but didnt register with the UC540.
The statements for the phones loads are listed:
tftp-server flash:/phones/525/spa525g-7-4-4.bin alias spa525g-7-4-4.bin
tftp-server flash:/phones/5x5/spa5x5-7-4-4.bin alias spa5x5-7-4-4.bin
and the files are in the directory:
Directory of flash:/phones/
    4 drw-           0 Oct 14 2010 08:05:10 -07:00 521_524
    6 drw-           0 Oct 14 2010 08:05:12 -07:00 525
    8 drw-           0 Oct 14 2010 08:05:12 -07:00 5x5
   10 drw-           0 Oct 14 2010 08:05:14 -07:00 7921
   18 drw-           0 Oct 14 2010 08:05:14 -07:00 7925
   26 drw-           0 Oct 14 2010 08:05:16 -07:00 7931
   34 drw-           0 Oct 14 2010 08:05:18 -07:00 7945_7965
   43 drw-           0 Oct 14 2010 08:05:18 -07:00 7970_7971
260165632 bytes total (154513408 bytes free)
POD-12#cd 525
POD-12#dir
Directory of flash:/phones/525/
    7 -rw-    10900992 Oct 14 2010 08:06:20 -07:00 spa525g-7-4-4.bin
260165632 bytes total (154513408 bytes free)
POD-12#cd ..
POD-12#cd 5x5
POD-12#dir
Directory of flash:/phones/5x5/
    9 -rw-     3750540 Oct 14 2010 08:06:40 -07:00 spa5x5-7-4-4.bin
260165632 bytes total (154513408 bytes free)
What else would possibly affect this that I could check.
I have a demo in the morning and am waiting on SCC support to fix my serial number so I can order support. So in the meantime I am stuck.
I could upload my config but I dont have time to clean it. I know this is a simple one line statement issue so if you have any ideas please let me know.
Also no changes were made to the configuration before or after this problem other than to reset the password.
Thanks

I thought about that but it was isolated to one series of phones.
I was working on the unit and had to do work on the wireless to get the 7925 working. I edited the voice wlan and changed from wep to open. After it uploaded the changes.... both phones started working.
It must have been security related as whatever statements were changed related to the wlan config.. it allowed the phones to complete registration.
I wish I could find out what caused it.. but I do have the cca logs. I will bring it up with cca feedback.
Thanks for your help.

Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

Can't log in with valid password, can't boot from disk, can't access disk utility, in single user mode can't reset password as appears locked in caps mode with '?' for forward slash, can anyone help?

Which keyboard layout you were using? German, French ... I suppose your layout is reset to the default: US and you are unable to find the "?" or "/" ...
Please have a look into the keyboard viewer, to see how the layout of your keyboard is actually.
marek

My network on the time capsule has a "lock" by it so I know that it requires a password. My guest network has no "lock" by it so I am thinking that it is not locked and people could use it. How do I lock my guest network on my time capsule or delete it?

My Time Capsule had a guest network that does not have a "lock" sign by it. So I am thinking that other people can use my wireless internet. My other network does have a "lock" by it. How do I delete or lock the guest network? I obvioulsy am not a computer savy individual so please use laymans terms if you can help me. Please and thank you.

In any event, if your OS X version is 10.7.x, download and install AirPort Utility 5.6 for Lion:
Lion: AirPort Utility 5.6.
If your OS X version is 10.5.x or 10.6.x, download and install AirPort Utility 5.5.3:
Leopard, Snow Leopard: AirPort Utility 5.5.3.
After you install the appropriate version of AirPort Utility, open it. The program will be located in your Utilities folder, which in turn is found in your Applications folder.
To open the Utilities folder, go to the Finder and select "Utilities" from the Go menu:
AirPort Utility 5.6 looks like this:
... but make sure you use the version of AirPort Utility you just downloaded.
Launch AirPort Utility and select your Time Capsule. Click Manual Setup, then the Guest Menu tab, then you can elect to disable the guest network, or to establish whatever security settings you want.
The window looks somewhat like this:
If your version of AirPort Utility does not look anything like that, you are probably not using the one you just downloaded. Find it and start over.
When you are finished configuring your Time Capsule, click Update and allow the Time Capsule to restart.

After updating to Firefox5.1, Nvidia kernal mode driver frequently "not responding & crashed then recovered", along with crashing of the Firefox browser.

After updating to Firefox5.1, Nvidia kernal mode driver frequently "not responding & crashed then recovered", along with crashing of the Firefox browser.

I have the same problem. I just upgraded to Win 7, no problems. Then I upgraded to FF 4.0, and I kept getting Nvidia Video Card crashes. I always undo my last computer change/install when something like this happens, so I immediately uninstalled 4.0, and went back to my older version of Firefox. No problems ever since.

HT3228 How do I reestablish hotmail delivery to my iPhone and iPad after I have been locked out? I have reestablished service to my PC, but cannot get email on other devices, even after updating to new passwords.

How do I reestablish hotmail delivery to my iPhone and iPad after I have been locked out? I have reestablished service to my PC, but cannot get email on other devices, even after updating to new passwords.

Sometimes it is fruitless to try to "fix" a broken account on an iOS device. I would delete the account on both devices and then configure the account again from scratch.

HT201269 Just updated my iPhone to latest IOS but unable to match security code entered during update. Phone now locked. Is there some way to recover password?Is there

Just updated my iPhone 4 to latest IOS but unable to match password security nbr. Phonoe now locked.
Is there a way to recover password?

Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
Anything else I could try, or am I doomed!
All of your help is much appreciated, thanks

My ipod was in recovery mode and fixed it. i can use it. but the problem is whenever am i connect it with itunes it says IPOD is in recovery mode even after recover is done. i cant sync ipod rite now. it showing same msg again. nyone knows wat to do plz??

my ipod was in recovery mode and fixed it. i can use it. but the problem is whenever am i connect it with itunes it says IPOD is in recovery mode even after recover is done. i cant sync ipod rite now. it showing same msg again. nyone knows wat to do plz??

I did the restore and it cleared and reset the iPod but after it finished the same error came up. I tried this 3 times. Also it no longer shows up as a drine in My Computer.
if it's relentlessly doing that to you, it's plausible that the message is being caused by a Windows drive letter confusion. (that's consistent with the disappearance for My Computer, too.)
see the following article for troubleshooting information on that possibility:
"iTunes has detected an iPod in recovery mode - Use iTunes to restore"

How to recover Passwords Plus data after installing Lion?

How to recover Passwords Plus data after installing Lion?

While waiting for DataViz to rewrite the app, get another hard drive and install 10.6 on that; re-start from there, you can then open Passwords Plus. Use whatever method you like to copy the data. A bit of a chore yes, but I can't think of another way.
There is in the AppStore Ascendo DataVault which performs the same function. I am going to wait a week for DataViz, then jump ship.

Locked out of Guest mode on iphone 5 help?

so I have guest mode enabled on my iPhone and I accidently triple clicked and I don't remember the passcode Ugh.
I Don't want to restore my phone and I tried going on itunes to try to restart it and nothing? Please help

There is no "Guest Mode" on an iPhone. Perhaps you mean Guided Access? If you don't remember the passcode, you may have to restore your phone. However, try resetting it first by pressing and holding the Home and power buttons until the apple appears.

I have forgotten my password and locked my phone, how can i clear the problem

I have forgotten my password and locked my phone, how can i clear the problem

By coincidence, this happened to my son just last night. You do NOT have to restore it to a new phone, but you probably want a current backup.
Luckily, you can still sync and back it up even if it's locked, so connect it to the computer you usually sync it to. Go to the summary page. It's easiest and fastest to use a local backup, so if iCloud backup is on, turn it off and click "Backup now".
After it backs up, either click "Restore iPhone", or
- hold home and the top button until the screen goes black, release the top and continue to hold the home button until iTunes says "iPhone in recovery mode detected".
Follow instructions to restore from backup, and then sync to restore content. Your phone will come up in an unlocked state. If you have any stuff that was purchased directly to the iPhone (only), you'll have to re-download it.
Remember to turn iCloud backups back on if you use them.
If you don't sync you iPhone to a computer then I *think* those instructions with the buttons will put it into a mode where you can restore it from the cloud (make sure it is NOT connected to a computer while you do this). Otherwise, you will have to restore it as a new phone, then go to settings, reset, then restore it from the cloud.

My daughter used a password to lock her ipod touch and she can't remember it. Is there a way to reset the password. Thank you for any assistance

My daughter used a password to lock her ipod touch and she cannot remember it. How do we unlock her ipod. Any assistance is wonderful

To circumvent an iPod with a forgotten passcode you would need to restore the iPod to factory settings. This will remove the software and data/content from your iPod as well.
To put your iPod/iPhone into recovery mode:
1. Make sure the iPod/iPhone is connected to a computer with iTunes installed on it.
2. Hold down the sleep/wake button(top button) and the home button at the same time until the iPod/iPhone screen goes black then shows the apple logo( usually 10-15 seconds).
3. Once the apple logo appears on the screen, let go of the sleep/wake button and keep holding the home button.
4. The ipod/iphone screen should show an itunes logo and usb cable if you were successful. A dialog box will appear in iTunes that states an iPod/iPhone in recovery mode has been detected if you are successful.
5. Click ok, then click the Restore button
After that you should be up and running in no time!
I hope that this is helpful.

IMac mid 2011 works only in guest mode

I changed my administratiors password thinking it would automaticly become the keychain password. Now I can only log on in the guest mode because a normal log in is stopped at a pop up asking for the keychain password. What can I do? Am currently running YOSEMITE 10.10.
THANK YOU

Thank you for your response. I do not remember the previous admi PW. I finally partitioned the HD. erased the new drive, installed Yosemite on that one, migrated files and app's, not computer and network settings. This has eliminated the keychain bug, apparently in Yosemite. Then did the same for other partition. A little laborious perhaps but after three days of trying different solutions the only thing that worked.

How to get my ipad to connect to itune if the password is locked

How to get ipad to connect to itune if the password is locked.

note total data loss
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn device off
hold home button and plug cable into IOS device. do not release home button until an itunes graphic appears on IOS device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808

I am trying to connect my new iMac to my Buffalo router. I forgot my router password, so I reset it and it is working. I can't figure out how to reset my router password and lock it on my iMac.

I am connecting my new iMac to my Buffalo router. I forgot my router password so I pushed the reset button and my computer was able to connect. The problem is, I can't figure out how to set my new password and lock the router. I went to the Buffalo website and downloaded the CD, as I can't find that either. I can't open any of it because it says it is Windows and can't open it. I am new to Apple!

kellyfromdanville wrote:
I am new to Apple!
Ah, new to routers too.
Perhaps it's best to have a local computer support person come set you up?
To explain everything would require writing a book here.
But this is what you want basically.
Router, new Wireless N, firmware updated.
1: Two accounts, one admin, one guest Internet access. Random +30 plus character lenght passwords each preferred.
(guest password to max password length of any iDevices)
2: Encryption: WPA2 AES. No Ping. No remote access. No MAC filtering. Visible.
3: Guest access on devices and computers only. Passwords written down and stored.
4: OpenDNS preferred but not mandatory.
If you get OpenDNS, you can log into their website for free and set parental controls on things like inappropriate sites for children. So whatever device is used on your network can't access a large portion of those sites (nothing is perfect) by most users who are not technical oriented.
What your doing now is running the bare bones unsecure router which can be used harmfully against you.
Even a Apple Airport router has to be very well secured. The defautl cd and out of the box setup is not a secure solution.

After recovering password Iam locked in guest mode

Similar Messages

Maybe you are looking for