After Recovery cannot get iTunes to work

Hi,
My system recently crashed and I had to do a system recovery. Now iTunes shows, but when I try to start it I get an error message:
AppName: itunes.exe AppVer: 6.0.3.5 ModName: unknown
ModVer: 0.0.0.0 Offset: 10001040
that the system wants to send to Microsoft. I haven't dared to uninstall iTunes for fear I'll lose all my downloaded music. I download and try 'repair' but to no avail. Any suggestions would be greatly appreciated. I did a search and every post I read had just a little different spin than my issue.
Regards,
Erika

Hello there, I have had a problem with my ITUNES for a while now and my question somewhat relates. I have been using ITUNES for a while, not just recently downloaded like AC. I believe for a month or two my itunes has not worked. I open ITUNES and without even showing up, it quits itself. For a while I tried the MSCONFIG trick, but even with that it really doesn't help becuase it eventually quits itself. I just tried the 'deleting the quicktime then repairing the ITunes, but that didn't do anything. On good days, when it does show up for about a minute after the MSCONFIG, once I try to add music it quits. Please help me. I am in need of some serious help. Thanks so much
Windows XP

Similar Messages

HT4623 iPhone 5 Upgraded to iOS7 but cannot get iTunes to work!

? iPhone 5 Upgraded to iOS7 but cannot get iTunes App to work!
The iTunes App opens but does not show anything! e.g. blank screen only. Tries to connect and sometimes gives message "Cannot connect to iTunes store". I can see top and bottom bar icons like Music, Films, TV, Search which each launch a new blank screen only. I can even get to Purchased option which still gives a blank screen. Have restored twice but result is the same.
Advice welcome.

Discovered the fix to no iTunes due to another separate App problem that locked up after iOS7 upgrade. To fix, goto "Settings", "Safari", "Privacy and Security" and set the "Block Cookies" to "From third parties and advertisers". Exit Settings and restart the iPhone. Works for my blank screen iTunes issue.

Older IPOD - cannot get Itunes to work now after 7.01 downloaded

I got a prompt to download 7.01, so like a 'do be' I did. Thing is, I don't have video, and QuickTime said it could not run unless I had a 'key'. I logged back on, and the key is $30.00 approx...if it was only 5 dollars, maybe I'd get it. So I uninstalled Quicktime, and now Itunes won't run at all. How do I go back? I'm not even sure what the prior version of Itunes was.
I guess my other question is, why would I get prompted about a new version of Itunes when I have an older IPOD that does not have video?
thanks...

this is what i get when i run diagnostics in itunes with shuffle connected
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Gericom Ego
iTunes 7.7.0.43
QuickTime 7.5
CD Driver 2.0.7.3
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.0.0.33
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number 00C44CCC186A10D9
Current user is an administrator.
The current local date and time is 2008-07-30 10:56:04.
iTunes is not running in safe mode.
Video Display Information
ATI MOBILITY RADEON 9700
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 7.7.0.43 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 2.0.28.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 . Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 . Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 . Device is working properly.
Intel(R) 82801DB/DBM USB2 Enhanced Host Controller - 24CD . Device is working properly.
FireWire (IEEE 1394) Host Controllers:
OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPod shuffle (2nd & 3rd Generation) running firmware version 1.0.4
Serial Number: 5E643ZULVTE

Please help!! I cannot get iTunes to work!

I have uninstalled and reinstalled numerous times. Each time I get an error that says "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2)"
Does anyone know how to fix this??

I suggested several things to GeekyNerdGirl in her first post here. Take a look.
My iPad is in what seems like permanent restore mode after iOS 7.2 update?
It can take more than a few attempts before Recovery Mode will work and you have to follow the steps exactly. DFU mode is even harder to perform correctly beside of the 10 second hold. Don't stop trying. Eventually one of these methods could work for you.

New User Cannot get Itunes to work - Setup Assistant Not Showing

I'm hoping somebody can help me. I have been trying for hours now to install Itunes on Windows XP.
It downloads, I run it, it installs, but doesn't seem to bring up the Set-up Assistant. After I click Finish on the first set up menu, it does nothing. So I then go and click the shortcut to start Itunes and to sync it with the Ipod Touch, but nothing happens.
I have watched the set up video and can't see what is wrong.
Edited to add: I don't get any error messsages while trying to install Itunes.
I have a very unhappy 13 year old who can't enjoy his birthday present!
Message was edited by: aral71

Hi GennoAustralia,
To license your already installed products running in trial, please follow below instructions:
1. Remove all adobe entries present in host file. Host file is located at: C:\Windows\System32\\drivers\etc\hosts(win) and /private/etc/hosts(mac)
2. Launch any of your product,you want to license.Follow step a) or b) whichever applicable:
a) If you have bought subscription for same adobe id which you used while installing your product in trial, you will get a "Sign In" screen. Click on "SIgn In", your product is now licensed.
b) If your adobe id having subscription is different from adobe id used while installing product in trial, a trial screen which has two butttons : "License This Software" and "Continue Trial" is shown. Click on "License This Software". On next screen, click on "Not your Adobe Id" and enter the adobe id carrying subscription.
You will now be able to license your product.
Thanks,
Manjri

Cannot get itunes to work please help

When I double clik on ITunes it takes ages to start then when i plug my ipod or shuffle in the window opens showing the drive ie. E:\ for my shuffle and i get the following message in itunes " The software required for communicating with the Ipod s not installed correctly. Please re-install ITunes to re-installthe Ipods software"
I have uninstalled and re-installed, clean out the registry tried selective startup.
Been without itunes for over a week now any help would be much appreciated.
I also installed Itunes on my works laptop and this operates fine and sees the ipods, all be it without my library.

this is what i get when i run diagnostics in itunes with shuffle connected
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Gericom Ego
iTunes 7.7.0.43
QuickTime 7.5
CD Driver 2.0.7.3
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.0.0.33
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number 00C44CCC186A10D9
Current user is an administrator.
The current local date and time is 2008-07-30 10:56:04.
iTunes is not running in safe mode.
Video Display Information
ATI MOBILITY RADEON 9700
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 7.7.0.43 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 2.0.28.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 . Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 . Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 . Device is working properly.
Intel(R) 82801DB/DBM USB2 Enhanced Host Controller - 24CD . Device is working properly.
FireWire (IEEE 1394) Host Controllers:
OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPod shuffle (2nd & 3rd Generation) running firmware version 1.0.4
Serial Number: 5E643ZULVTE

Cannot get Itunes to work

I tunes does not see my nano. Windows does (Winxp sp2) and identifies it as an ipod. It charges etc. I have tried different usb ports, and an add in usb card. I have tried ALL of the troubleshooting steps on the site. Any ideas?

Well, I tried all suggestions and it did not work. However what I did do was get Xplay, and that works like a charm. I have to say I am VERY dissapointed in itunes. If xplay works there is nothing wrong with my pc or the nano, it is simply poor software that seems to have very widespread compatibility issues. Considering the huge price of the Nano this is very annoying to me. Also, the lack of support for almost anything but itunes makes this even worse. If they are going to force itunes on us it should at least WORK

I keep getting an apple application support missing error. Therefore I cannot get Itunes to work on my PC.

I have downloaded ITunes numerous times on my PC so I can sync with my Ipad and Iphone. I get "congratulations" you have downloaded ITunes followed by a message stating that apple application support is missing. Is there a way to download this as a stand alone?

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Replaced h/d on mac {o/s is 10.6.8} can't get itunes to work

cannot get itunes to work with new h/d on my ( i-mac 10.6.8) 2.16 ghz/intel core 2 dueo
when i try to open it i get this "The file “iTunes Library.itl” cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?" when i download the app it just keeps telling me the same thing!

Did you just download the installer or did you you actually install it? Are you starting from the application icon the in the Applications folder or from the dock? Have you checked there are not two version of iTunes on the computer?

I cannot get iTunes to install. It says I'm missing MSVCR80.dll.

I need help on this one. I cannot get iTunes to work since the last update. I get that missing dll file message and now it won't let me reinstall ITunes. I appreciate your help!!!

Click here and follow the instructions.
(98810)

I recently purchased Windows 8 laptop and installed Office 2013. I then installed iTunes. After moving all my music to the new PC, I got iTunes to import it and sync it to my iPod (3rd gen). However, I cannot get iTunes to sync my Outlook Contacts

I recently purchased a Windows 8 laptop and istalled Office 2013. I then installed iTunes. After moving all my music to my new PC I got iTunes to import it, and then synced it to my iPod (3rd gen.) However, I cannot get iTunes to sync my Outlook Calendar or Contacts with my iPod. When I try it crashes Outlook. iTunes continues to try to sync, but when it finishes my Calendar and Contents are empty (ERASED!). I have de-installed and re-installed iTunes (according to Apple's instructions), repaired Office 2013 and Outlook, scanned for viruses (etc), cleaned out temp folders, defragmented, etc., etc., etc. Has anyone seen this before, and does anyone know houw to fix it? (HELP!)

Well, I guess I have to download some other software to make my apple product work. Really great stuff you guys sell. I will never buy another apple product. My Iphone, Ipod and Itunes are junk

TS1538 I cannot get Itunes to recognize my Iphone 4s, or Ipad2 after installing IOS7??? Says must install Itunes 11.1. 0So I did and still no luck. Anyone got any advice???

I cannot get Itunes to recognize my Iphone4s, or Ipad 2 after installing IOS7? Says must install Itunes 11.1 So I did that and still no luck. Anyone got any advice???

Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/

Cannot get iTunes DJ to work

No doubt it is something really obvious that I'm missing, but I cannot get iTunes Dj to work. If I click on iTunes DJ in the left column, right section of the window says "iTunes DJ" and explains that I can make a continuous mix, but there is no list of music. The play button is greyed out.
The help file says "To select a specific playlist (instead of your library) for the live mix, choose an option from the Source pop-up menu at the bottom of the iTunes window."
but there is no Source pop-up menu at the bottom of the iTunes window.
Any ideas?

Do you see the grey bar at the bottom of the screen when you select iTunes DJ, the one with the Settings and Refresh button, as seen in the picture on this web page? If not, then the bottom of the window may just be off the screen on your system so you don't see the Source selector. If that does seem to be the problem, try changing the resolution of your Mac's screen (Displays system preference) to the highest resolution. If it already is, try changing it to a lower resolution, then back. That may get the iTunes window to reappear..
If not, open the Script Editor application, paste in the following text (up to and including the line that says "end tell") and click the "Run" button:
tell application "Finder"
set {d1, d2, d3, d4} to (get bounds of window of desktop)
end tell
tell application "iTunes"
set margins to {d1 + 10, d2 + 54, d3 - 10, d4 - 148}
set bounds of window 1 to margins
end tell
If the iTunes window is running off the screen, that should restore it.
Hope this helps.

HT1926 I cannot get iTunes to load -- "Apple Application Support was not found". I have tried multiple things to fix it and nothing works including re-installing.

I cannot get iTunes to load -- "Apple Application Support was not found". I have tried multiple things to fix it and nothing works including re-installing.

Try b noir's post Standalone Apple Application Support install to see if that can repair the problem or provide futher information, otherwise try reinstalling again as shown in Troubleshooting issues with iTunes for Windows updates.
tt2

I HAVE SUBSCRIBED TO ACROBAT PRO, BUT CANNOT GET IT TO WORK ON MY PC AFTER THE DOWNLOAD

i HAVE SUBSCRIBED TO ACROBAT PRO, BUT CANNOT GET IT TO WORK ON MY PC AFTER THE DOWNLOAD

Windows 7 operating system....constantly pops up with a window that says I am not on the internet and can't register my product....obviously I am on the internet at this moment because I am posting on an online forum. I downloaded the software four times now, after uninstalling it three times. I downloaded XI Pro.

After Recovery cannot get iTunes to work

Similar Messages

Maybe you are looking for