After recovery the second HDD is not visible - Qosmio G30

Hello
I have Qosmio G30 and i use the recovery cd and i lose the 2 hdd
The 2 Hdd is not shown in my computer and every time i restart the system tell need mirroring.
So ineed some help plz
thx

Hi
I presume your RAID settings are set to mirroring (RAID-1) and not to stripping (RAID-0)
The RAID settings can be changed in the BIOS on the 3rd page.
Please check this.
But note; if you would change the RAID settings then you would lose the whole data stored on the HDD.
PS: Check you user manual. There is a useful info about RAID and how to use it.
Best regards

Similar Messages

Do i need to re-set bootblk after replaced the second SCSI hdd in sun box?

I have a sun box with 2 SCSI hdd inside. The second hdd faulty..
then i follow the instruction to detach and metaclear..and metainit again...
but i am not sure that do i need to set bootblk again in the new hdd (2nd)?
after metainit, i have attach to the 1st-way mirror. and it is doing syncronization.......
can anybody answer this?
Question 1) Do i need to install bootblk in new SCSI hdd?
Question 2) If the hdd is FC-AL hdd, do i need to reinstall bootblk?
Raymond

Hi,
Yes, i need to replaced a new hardisk.. And i also need to copy the VTOC from the good hardisk to the new 1...
but if like wat u said - copy VTOC from good hardisk to new hdd, then no need copy bootblk.
Then why when we create a 2 way mirror from scratch.... we need to create bootblk to the second hardisk? becoz when create from scratch, we also need copy VTOC from 1st hdd to 2nd hdd..
am i right?
raymond

After downloading a file, the downloads window pops up, but is always empty. the downloaded files are not visible.

After downloading a file, the Downloads window pops up but it is always empty. The files downloaded are not visible on this window. In order to access them, they must be sought out via windows explorer. Any ideas? Thanks.

Be sure Options > Privacy > "Remember download history" is checked.
*[https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel Options window-Privacy panel]
If you want to retain download history, do not clear Download History when using Clear Recent History or "Clear history when Firefox closes" > Settings
*[https://support.mozilla.com/en-US/kb/Clear%20Recent%20History Clear Recent History]
*Clear history when Firefox closes: [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel Options window-Privacy panel]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Can I use the second HDD in a Mini for Time Machine?

I am looking to replace one of the HDDs in a Mac Mini with an SSD, this would be for the main OS to work on and all my files, I am not a big advocate of spreading around my files over multiple data silos. I was wondering then, as I don't have a Time Capsule, whether it would be possible to dedicate the second HDD for exclusive use of Time Machine, backing everything up?
I don't have a Mini at the moment and so don't know how OS X treats the existing setup, is the HD treated as one, or are the two clearly separate? It's a mystery to me why there are two in the first place, I summise that it was an attempt by Apple to create the illusion of a fater computer by adding in a small amount of SSD to complement the larger (and cheaper) HDD?
Anyway, would splitting the two work and would it be easily achievable with existing tools in OS X?
Thanks.

Hamper wrote:
I was wondering then, as I don't have a Time Capsule, whether it would be possible to dedicate the second HDD for exclusive use of Time Machine, backing everything up?
Anyway, would splitting the two work and would it be easily achievable with existing tools in OS X?
Yes, you can use the 2nd HDD with Time Machine as your TM back up drive.
As long as you are able to format your new SSD and the HDD, you can use them independently. I would advise using Terminal and the diskutil commands to do this as Mountain Lion 10.8.3's GUI Disk Utility will see the SSD and HDD as needing to be "fixed" (drives marked in RED) and if you choose to FIX the drives your two drives will automatically be setup as a Fusion drive and all data on the drives will be lost.

In webdynpro abap , the ui layout is not visible. please read query fully

hi , in webdynpro abap , the UI Layout is not visible.
I did some settings .
1) in SICF t-code , i actvate the all services realted to http . i dont know which services properly need to webdynpro ui layout.
after activating those services, ui elements are coming . but when i am tryin to drag ui elemetns in to UILayout , it showing some error message. I am not able to drag ui elemetns to ui layout.
Please tell how to solve this problem.
1) if the solution is regarding ip address in host file, please guide me in depth step by step.
2) if the solution is realted to browser settings , please guide me in depth each step by step for settings in browser .

Hi sujana,
I had a similar problem..
if u hav a look at ur url you will come to know the following things:
<schema>://<host>.<domain>.<extension>:<port>/sap/bc/webdynpro/<namespace>/<application name>
the same url can be traced in SICF.
Also u need to add the server ip/domain name in the advanced tab in lan settings so that it does go through the proxy..
You can check the following link: http://help.sap.com/saphelp_nw04s/helpdata/EN/8c/780741375cf16fe10000000a1550b0/content.htm
Best Regards,
navin fernandes.

When preview my ibook on IPAD the text on the edge of the text box is not visible. How do I fix that?

When I preview my ibod created in Ibook Author on my IPAD some of the text on the edge of the text box is not visible. How do I fix that?

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

After repacing the videoscreen I can not get the iphone to start

The Iphone a 3gs after replacing the videoscreen I could not get it to start. The system stays in recovery mode.
It is not jailbreaked or something like that. I can"t say it is death as itunes sees it in recovery mode. Need some help.

Find a competent repair shop or buy a new phone. We can't help you and apple won't touch that phone now.

When I upgraded my Mac Pro HDs I lost the capcity for 2 monitors. One monitor works fine but the second one is not "seen" by the Mac Pro. Help?

My MacPro is a dual quad core 2.8 intell processor system with 6 gig of RAM and 4 HDs. I recently upgraded the HDs from 500 gig each to 2 TB each. I did that by copying each existing hard drive to a new hard drive and then inserting the new hard drive where the copied drive had been. I followed all of the instructions for the OX system that came after copying and replacing the drive with the OX on it. Unfortunately now I can no longer use the 2 monitors that I used to use on the system. One monitor works fine, the second on is not found by the OX system and simply won't respond or receive a signal from the computer. Any ideas?

Have you tried a NVRAM / PRAM reset?
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Calendar now splits my entries into 2 separate entries. 1 entry lists date/time/name. The second entry lists notes

Calendar now splits my entries into 2 separate entries. 1 entry lists date/time/name. The second entry lists notes and alerts. I can delete the date/time one, but not the alert entry. That means I will get all the alerts even if I deleted the original entry. It shows up as two separate entries for each one entry. This happened after the Yosemite install.

Calendar now splits my entries into 2 separate entries. 1 entry lists date/time/name. The second entry lists notes and alerts. I can delete the date/time one, but not the alert entry. That means I will get all the alerts even if I deleted the original entry. It shows up as two separate entries for each one entry. This happened after the Yosemite install.

After REFRESH the cached object is not consistent with the database table

After REFRESH, the cached object is not consistent with the database table. Why?
I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
JDeveloper.
How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

qkc,
Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
John

HT201363 How can I make an Apple ID without credit card if the "none" tab is not visible to me?

How can I make an Apple ID without credit card if the "none" tab is not visible to me?
Help me out please

Hello, aligt9p.
Thank you for visiting Apple Support Communities.
To create an Apple ID without a credit card, there is a specific series of steps that have to be processed in order to allow the payment to be set as none on creation of the account.
Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
If the specific steps have not been processed, a credit or debit card will be required to complete the setup the account.
However, it can be removed and payment method changed to none as long as there is not an outstanding balance.
iTunes Store: Changing account information
http://support.apple.com/kb/ht1918
Cheers,
Jason H.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

HT201320 Re: I compose in yahoo using safari but the attachment icon is not visible, I compose in yahoo using safari but the attachment icon is not visible

i compose email using yahoo thru safari and the attachment icon is not visible
from apple ONLINE HELP they told me yahoo version is different than the ipad version??????????
then today they told me not to go thru safari but use the yahoo email app
tried that as well and still no icon of attachment is seen.
PLS CAN SOMEONE HELP AS TO HOW DOES ONE SEE THE ICON FOR ATTACHMENT....as even the apple store guys are unable to help

Iam trying to attach normal files

Characteristics value assignments screen- the results button is not visible

Dear Gurus,
In variant configuration, while i am assignning characteristics values in the characteristics value assignments
screen, the results button is not visible. Even when I try to go to the results option from the Menu (GOTO > Results),
it is disabled.
Can any one tell me why is it so ?
Regards

Hi
I have checked my config profile. it looks ok to me.
Can u suggest anything in particular that I need to check.
Rgds
Vishal Saha

After recovery the second HDD is not visible - Qosmio G30

Similar Messages

Maybe you are looking for