After Refresh of Test System XI connection is not working

We are using SRM 4.0 in ECS and recently did a refresh to our Quality system. After the refresh we went through the normal post refresh activities and assumed that everything was ok. We started creating test shopping carts and PO for XML vendors and nothing is going out through XI. I have ran tcode sxmb_moni to check to see if any error message are occuring but there are no messages in the system.
We have restarted the server but can't seem to get anything to go out through XML.
Can anyone provide any information or some things to check?

Hi
First check the setting in 'Define backend systems' if the SLD system name is correctly entered for your EBP system. Then using txn SLDCHECK, you can check connectivity to XI.
You can also check txn SXMB_ADM to see if the integration server connection is correctly defined.
Regards,
Sanjeev

Similar Messages

I ipod classic 80 gb when I am connected pc connected after that is hanged just showing connected its not working any button

I ipod classic 80 gb when I am connected pc connected after that is hanged just showing connected its not working any button .

Try connecting it to another PC, if it is ok, then your PC has some software conflict with iTunes.
If it hangs other PC also, then your iPod Hardisk, maybe bad.
Do the disk diagnosticas posted earlier by tt2, to check the health of your Hardisk.
Have a nice day!

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network, restarting the iPad

My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network , restarting iPad , ...

The same story. No 3G after updating to 6.1. Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

Test content server connection doesn't work

Hello,
I have installed Content Server 6.40 in windows2008 and the test connection does not work. The URL http://onecsrdev:1090/ContentServer/ContentServer.dll?serverInfo
says
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
I loof for the contentserver.dll file and it does not exist in the server. When I installed the content server I mark the flag install website, so I don't understand what the problem is.
I have updated the MAXDB software to 7.6.06.11 because the DVD installation release is not valid for windows2008. SAP has guided me through this issue.
Thanks and best regards,
Ana

> I have installed Content Server 6.40 in windows2008 and the test connection does not work. The URL http://onecsrdev:1090/ContentServer/ContentServer.dll?serverInfo
> says
> Internet Explorer cannot display the webpage
You get a connection to "onecsrdev"? Can internet explorer resolve the name? Proxies activated?
Markus

Why does my camera connection kit not work with my ipad 1 after updating on ios 5?

Why does my camera connection kit not work with my ipad 1 after updating on ios 5? What can I do to make it work again?

It should. It will only respond if there's something on the card for it to respond to, so do you have pics on the card?
And if it's messing up; try giving the iPad a restart. Hold down the sleep and home keys, past when you see hte red power down slider and until you see the silver apple. Let it reboot and try again. That can clear up any glitches on the device itself.

Automatic update of RemoteApp and Desktop Connections does not work (while manual updates with "update now" is working)

Hello,
on several Windows 7 Clients the update/refresh of the RemoteApp and Desktop Connections stopped not working automatically. There is a Update failed error. When we do an "Update Now" manually, it gets synchronized without problems.
I am asking me if there is an issue with a stored Password as we Need to Change the Passwords regularily. The error is occuring for Connections to all RDS Servers (we have severals).
Does Windows store the user Password in the Task Scheduler? If yes, does the schedule Task Password Change automatically after the Domain Password Change?
Or what else could be the issue? The RDS Server and the certificate (Name the same as the URL) seems to be fine as not all Clients have this issue.
Thank you for your help

Hi,
Thank you for posting in Windows Server Forum.
By default it will automatically update the RemoteApp and Desktop Connections but if in any particular case it’s not happening then for a try you can restart the server and check the result again. In addition you can try running below command and check
the result.
Start-Process rundll32 -ArgumentList "tsworkspace,TaskUpdateWorkspaces2
More information:
Powershell to update "RemoteApp and Desktop Connections"
If a task is registered using the Administrators group for the security context of the task, then you must also make sure the Run with highest privileges check box is checked if you want to run the task. Please check “Task
Security Context” for more details.
Hope it helps!
Thanks,
Dharmesh

Bug (?) with Corporate Connectivity is (not) Working check

Noticed something odd. In situations where:
Direct Access client is offsite
their Internet access is via WiFi
they first have to enter their access credentials through a web-based captive portal before access is granted
then the Corporate Connectivity Check process malfunctions. Have seen cases where, after accessing the captive portal and being authenticated, Internet access works on the client. Direct Access then connects successfully. This is confirmed
on the server console, showing the client connected and the user credentials used. The client is able to access internal resources just fine (e.g. network drives on file servers).
But on the client itself, it still says Corporate Connectivity is Not Working. The WiFi icon is showing an exclamation mark. My belief is that this is caused by the client's inability to access Microsoft NCSI servers in a timely fashion.
So it looks like the corporate connectivity checks are dependent on Microsoft NCSI checks.
Can someone at Microsoft please look into this, as it is confusing our users (not to mention us guys in IT who have only just discovered this odd behaviour!).

Hi Steven !
Thanks a lot for your guidance !
After I followed the steps, I found that the time out occurs when trying to resolve the internal domain name.
The Windows Firewall was enabled on all profiles ( active on the public )
There were no IPsec sessions established in the Security associations tab, so I enabled the audit policy of the IPsec as per your instructions.
There is reoccurring error in the Security log :
Date:          10/8/2014 10:08:49 AM
Event ID:      4653
Task Category: IPsec Main Mode
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      MyW8Client
Description:
An IPsec main mode negotiation failed.
Local Endpoint:
Local Principal Name: -
Network Address: MyW8Client_Ipv6 address
Keying Module Port: 500
Remote Endpoint:
Principal Name:  -
Network Address: MY_DA_Servert Ipv6 address
Keying Module Port: 500
Additional Information:
Keying Module Name: AuthIP
Authentication Method: Unknown authentication
Role:   Initiator
Impersonation State: Not enabled
Main Mode Filter ID: 180987
Failure Information:
Failure Point:  Local computer
Failure Reason:  Negotiation timed out
State:   Sent first (SA) payload
Initiator Cookie:  9e636863e513b367
Responder Cookie: 0000000000000000
As far as I understand - the connection can not be established due to certificate error, which in my case is strange since my DA configuration is set to not use computer certificates, only Kerberos.
I will keep digging but any additional tip/advice will be appreciated!
Thanks again, Steven!
P.S. Just noticed that the Event ID 4653 produce two types of "Failure Reason" - apart from "Negotiation timed out" I also get "No policy configured"

ODBC Connection Pooling not working with 10g On Windows 2003

I have a bog standard Windows 2003 machine and installed Oracle 10g on it. It seems that the ODBC Connection pooling is not working.
I am using ASP and every time I try and render a simple page it is taking 4-5 seconds which is the time necessaru to create a database connection. ( Machine is 2.8 Ghz Xeon with 2 gigs of Ram)
The following VB Code can be used to test that the pooling is not working. It creates 2 connections to the database. On oracle 10g on windows 2003, it takes 5 seconds to create the first connection, and another 5 seconds to create the second connection.
When you run the same program on windows 2000 and oracle 9, the first connection take 3 seconds, and the second 0.05 seconds. ( The shorter time being due to the connection pooling)
time1=timer()
set conn=createobject("adodb.connection")
Conn.Open "dsn=oracleDSN;uid=yourusername;pwd=yourpassword"
time2=timer()
msgbox time2-time1
conn.close
set conn=nothing
time1=timer()
set conn=createobject("adodb.connection")
Conn.Open "dsn=oracleDSN;uid=yourusername;pwd=yourpassword"
time2=timer()
msgbox time2-time1
conn.close

ODBC Connection Pooling is controlled by the ODBC Driver Manager and defaults to off for every driver on every platform. Have you enabled connection pooling for your driver in the ODBC Data Source Administrator?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Internet connection does not work when Macbook wakes up from sleep

I recently installed MAC OSX LION. After that whenever the macbook pro wakes up from sleep, the internet connection does not work. I get a message 'DNS lookup failed'. I have to Turn off the WIFI and turn it back on every time. Has anyone come across this?

Same problem here. But I am afraid it has nothing to do with Safari because I don't even have Safari open. When it wakes from sleep, it has no internet connection and i cannot get me mail unless I shut wifi off and then back on. This happened back at the start of Snow Leopard too and it was something Apple eventually fixed.

After installing acrobat my Microsoft office package does not work properly, word will not open and in my email i can't select anything with the mouse

After installing acrobat my Microsoft office package does not work properly, word will not open and when I want to write an email in my outlook email i can't select anything with the mouse. so copy past en delete are not an option.@

Are you using any MS Office third party Add-ins? Test: Remove third party Add-ins other than PDFMaker. Test to see if the MS Office apps run afterward.
Did you attempt to repair MS Office? Test: Go to Add/Remove Control Panel run Repair.
Finally, have you tried testing to see if it's PDFMaker? Test: Use the Add/Remove Control Panel to modify the Acrobat installation to remove PDFMaker. See if MS Office applications launch and behave correctly?

After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock

After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock.

Hi
A long story about your issue... I think the reason of this is why you have deleted some registry keys. If you delete something in the Windows registry you should really know what you do. You can damage the complete Windows system!
So I think this is the reason why the keyboard doesnt anymore.
In the user manual I have founded that the CD-ROM booting option is only available with optional optical disk drive.
So for me it sounds like that your USB CD drive is not compatible to the notebook

HP Pavilion Entertainment PC: WiFi works, however, hard wired connection does not work.

Internet via WiFi works, however, hard wired connection does not work.
My software indicates my hardware is working properly.
However, if I connect another computer to the cable I am using, it connects to the internet without a problem.
And, if I connect my comupter to another cable that works with another computer, my computer still does not connect to the internet.
HP Pavilion dv9700 Notebook PC
32-bit Operating System
Windows Vista Home Premium Service Pack 2

It could be that the touch pad is broken on the inside and the contact area for the one button is either broken, blocked with an object or the cable going to the mother board is not inserted correctly into the mother board connector. I think in any case the case will have to come off and someone look for physical/connection problems. It doesn't sound like a software problem but there is always a chance.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Hi, not network, not connected hard, not work wi-fi or other name? i dont know

hi, not network, not connected hard, not work wi-fi or other name? i dont know, please what name other network?
Thank you!

Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
(Do not use your own Anti-virus to SCAN)
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. Apple care does not know what is the cause. Please help

After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.

I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272

After Refresh of Test System XI connection is not working

Similar Messages

Maybe you are looking for